/* * Copyright (c) 2008, 2009 open80211s Ltd. * Authors: Luis Carlos Cobo <luisca@cozybit.com> * Javier Cardona <javier@cozybit.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ #include <linux/slab.h> #include <asm/unaligned.h> #include "ieee80211_i.h" #include "mesh.h" #define IEEE80211_MESH_PEER_INACTIVITY_LIMIT (1800 * HZ) #define IEEE80211_MESH_HOUSEKEEPING_INTERVAL (60 * HZ) #define IEEE80211_MESH_RANN_INTERVAL (1 * HZ) #define MESHCONF_CAPAB_ACCEPT_PLINKS 0x01 #define MESHCONF_CAPAB_FORWARDING 0x08 #define TMR_RUNNING_HK 0 #define TMR_RUNNING_MP 1 #define TMR_RUNNING_MPR 2 int mesh_allocated; static struct kmem_cache *rm_cache; void ieee80211s_init(void) { mesh_pathtbl_init(); mesh_allocated = 1; rm_cache = kmem_cache_create("mesh_rmc", sizeof(struct rmc_entry), 0, 0, NULL); } void ieee80211s_stop(void) { mesh_pathtbl_unregister(); kmem_cache_destroy(rm_cache); } static void ieee80211_mesh_housekeeping_timer(unsigned long data) { struct ieee80211_sub_if_data *sdata = (void *) data; struct ieee80211_local *local = sdata->local; struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; set_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags); if (local->quiescing) { set_bit(TMR_RUNNING_HK, &ifmsh->timers_running); return; } ieee80211_queue_work(&local->hw, &sdata->work); } /** * mesh_matches_local - check if the config of a mesh point matches ours * * @ie: information elements of a management frame from the mesh peer * @sdata: local mesh subif * * This function checks if the mesh configuration of a mesh point matches the * local mesh configuration, i.e. if both nodes belong to the same mesh network. */ bool mesh_matches_local(struct ieee802_11_elems *ie, struct ieee80211_sub_if_data *sdata) { struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; /* * As support for each feature is added, check for matching * - On mesh config capabilities * - Power Save Support En * - Sync support enabled * - Sync support active * - Sync support required from peer * - MDA enabled * - Power management control on fc */ if (ifmsh->mesh_id_len == ie->mesh_id_len && memcmp(ifmsh->mesh_id, ie->mesh_id, ie->mesh_id_len) == 0 && (ifmsh->mesh_pp_id == ie->mesh_config->meshconf_psel) && (ifmsh->mesh_pm_id == ie->mesh_config->meshconf_pmetric) && (ifmsh->mesh_cc_id == ie->mesh_config->meshconf_congest) && (ifmsh->mesh_sp_id == ie->mesh_config->meshconf_synch) && (ifmsh->mesh_auth_id == ie->mesh_config->meshconf_auth)) return true; return false; } /** * mesh_peer_accepts_plinks - check if an mp is willing to establish peer links * * @ie: information elements of a management frame from the mesh peer */ bool mesh_peer_accepts_plinks(struct ieee802_11_elems *ie) { return (ie->mesh_config->meshconf_cap & MESHCONF_CAPAB_ACCEPT_PLINKS) != 0; } /** * mesh_accept_plinks_update: update accepting_plink in local mesh beacons * * @sdata: mesh interface in which mesh beacons are going to be updated */ void mesh_accept_plinks_update(struct ieee80211_sub_if_data *sdata) { bool free_plinks; /* In case mesh_plink_free_count > 0 and mesh_plinktbl_capacity == 0, * the mesh interface might be able to establish plinks with peers that * are already on the table but are not on PLINK_ESTAB state. However, * in general the mesh interface is not accepting peer link requests * from new peers, and that must be reflected in the beacon */ free_plinks = mesh_plink_availables(sdata); if (free_plinks != sdata->u.mesh.accepting_plinks) ieee80211_mesh_housekeeping_timer((unsigned long) sdata); } int mesh_rmc_init(struct ieee80211_sub_if_data *sdata) { int i; sdata->u.mesh.rmc = kmalloc(sizeof(struct mesh_rmc), GFP_KERNEL); if (!sdata->u.mesh.rmc) return -ENOMEM; sdata->u.mesh.rmc->idx_mask = RMC_BUCKETS - 1; for (i = 0; i < RMC_BUCKETS; i++) INIT_LIST_HEAD(&sdata->u.mesh.rmc->bucket[i].list); return 0; } void mesh_rmc_free(struct ieee80211_sub_if_data *sdata) { struct mesh_rmc *rmc = sdata->u.mesh.rmc; struct rmc_entry *p, *n; int i; if (!sdata->u.mesh.rmc) return; for (i = 0; i < RMC_BUCKETS; i++) list_for_each_entry_safe(p, n, &rmc->bucket[i].list, list) { list_del(&p->list); kmem_cache_free(rm_cache, p); } kfree(rmc); sdata->u.mesh.rmc = NULL; } /** * mesh_rmc_check - Check frame in recent multicast cache and add if absent. * * @sa: source address * @mesh_hdr: mesh_header * * Returns: 0 if the frame is not in the cache, nonzero otherwise. * * Checks using the source address and the mesh sequence number if we have * received this frame lately. If the frame is not in the cache, it is added to * it. */ int mesh_rmc_check(u8 *sa, struct ieee80211s_hdr *mesh_hdr, struct ieee80211_sub_if_data *sdata) { struct mesh_rmc *rmc = sdata->u.mesh.rmc; u32 seqnum = 0; int entries = 0; u8 idx; struct rmc_entry *p, *n; /* Don't care about endianness since only match matters */ memcpy(&seqnum, &mesh_hdr->seqnum, sizeof(mesh_hdr->seqnum)); idx = le32_to_cpu(mesh_hdr->seqnum) & rmc->idx_mask; list_for_each_entry_safe(p, n, &rmc->bucket[idx].list, list) { ++entries; if (time_after(jiffies, p->exp_time) || (entries == RMC_QUEUE_MAX_LEN)) { list_del(&p->list); kmem_cache_free(rm_cache, p); --entries; } else if ((seqnum == p->seqnum) && (memcmp(sa, p->sa, ETH_ALEN) == 0)) return -1; } p = kmem_cache_alloc(rm_cache, GFP_ATOMIC); if (!p) { printk(KERN_DEBUG "o11s: could not allocate RMC entry\n"); return 0; } p->seqnum = seqnum; p->exp_time = jiffies + RMC_TIMEOUT; memcpy(p->sa, sa, ETH_ALEN); list_add(&p->list, &rmc->bucket[idx].list); return 0; } void mesh_mgmt_ies_add(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata) { struct ieee80211_local *local = sdata->local; struct ieee80211_supported_band *sband; u8 *pos; int len, i, rate; u8 neighbors; sband = local->hw.wiphy->bands[local->hw.conf.channel->band]; len = sband->n_bitrates; if (len > 8) len = 8; pos = skb_put(skb, len + 2); *pos++ = WLAN_EID_SUPP_RATES; *pos++ = len; for (i = 0; i < len; i++) { rate = sband->bitrates[i].bitrate; *pos++ = (u8) (rate / 5); } if (sband->n_bitrates > len) { pos = skb_put(skb, sband->n_bitrates - len + 2); *pos++ = WLAN_EID_EXT_SUPP_RATES; *pos++ = sband->n_bitrates - len; for (i = len; i < sband->n_bitrates; i++) { rate = sband->bitrates[i].bitrate; *pos++ = (u8) (rate / 5); } } if (sband->band == IEEE80211_BAND_2GHZ) { pos = skb_put(skb, 2 + 1); *pos++ = WLAN_EID_DS_PARAMS; *pos++ = 1; *pos++ = ieee80211_frequency_to_channel(local->hw.conf.channel->center_freq); } pos = skb_put(skb, 2 + sdata->u.mesh.mesh_id_len); *pos++ = WLAN_EID_MESH_ID; *pos++ = sdata->u.mesh.mesh_id_len; if (sdata->u.mesh.mesh_id_len) memcpy(pos, sdata->u.mesh.mesh_id, sdata->u.mesh.mesh_id_len); pos = skb_put(skb, 2 + sizeof(struct ieee80211_meshconf_ie)); *pos++ = WLAN_EID_MESH_CONFIG; *pos++ = sizeof(struct ieee80211_meshconf_ie); /* Active path selection protocol ID */ *pos++ = sdata->u.mesh.mesh_pp_id; /* Active path selection metric ID */ *pos++ = sdata->u.mesh.mesh_pm_id; /* Congestion control mode identifier */ *pos++ = sdata->u.mesh.mesh_cc_id; /* Synchronization protocol identifier */ *pos++ = sdata->u.mesh.mesh_sp_id; /* Authentication Protocol identifier */ *pos++ = sdata->u.mesh.mesh_auth_id; /* Mesh Formation Info - number of neighbors */ neighbors = atomic_read(&sdata->u.mesh.mshstats.estab_plinks); /* Number of neighbor mesh STAs or 15 whichever is smaller */ neighbors = (neighbors > 15) ? 15 : neighbors; *pos++ = neighbors << 1; /* Mesh capability */ sdata->u.mesh.accepting_plinks = mesh_plink_availables(sdata); *pos = MESHCONF_CAPAB_FORWARDING; *pos++ |= sdata->u.mesh.accepting_plinks ? MESHCONF_CAPAB_ACCEPT_PLINKS : 0x00; *pos++ = 0x00; if (sdata->u.mesh.vendor_ie) { int len = sdata->u.mesh.vendor_ie_len; const u8 *data = sdata->u.mesh.vendor_ie; if (skb_tailroom(skb) > len) memcpy(skb_put(skb, len), data, len); } } u32 mesh_table_hash(u8 *addr, struct ieee80211_sub_if_data *sdata, struct mesh_table *tbl) { /* Use last four bytes of hw addr and interface index as hash index */ return jhash_2words(*(u32 *)(addr+2), sdata->dev->ifindex, tbl->hash_rnd) & tbl->hash_mask; } struct mesh_table *mesh_table_alloc(int size_order) { int i; struct mesh_table *newtbl; newtbl = kmalloc(sizeof(struct mesh_table), GFP_KERNEL); if (!newtbl) return NULL; newtbl->hash_buckets = kzalloc(sizeof(struct hlist_head) * (1 << size_order), GFP_KERNEL); if (!newtbl->hash_buckets) { kfree(newtbl); return NULL; } newtbl->hashwlock = kmalloc(sizeof(spinlock_t) * (1 << size_order), GFP_KERNEL); if (!newtbl->hashwlock) { kfree(newtbl->hash_buckets); kfree(newtbl); return NULL; } newtbl->size_order = size_order; newtbl->hash_mask = (1 << size_order) - 1; atomic_set(&newtbl->entries, 0); get_random_bytes(&newtbl->hash_rnd, sizeof(newtbl->hash_rnd)); for (i = 0; i <= newtbl->hash_mask; i++) spin_lock_init(&newtbl->hashwlock[i]); return newtbl; } static void ieee80211_mesh_path_timer(unsigned long data) { struct ieee80211_sub_if_data *sdata = (struct ieee80211_sub_if_data *) data; struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; struct ieee80211_local *local = sdata->local; if (local->quiescing) { set_bit(TMR_RUNNING_MP, &ifmsh->timers_running); return; } ieee80211_queue_work(&local->hw, &sdata->work); } static void ieee80211_mesh_path_root_timer(unsigned long data) { struct ieee80211_sub_if_data *sdata = (struct ieee80211_sub_if_data *) data; struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; struct ieee80211_local *local = sdata->local; set_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags); if (local->quiescing) { set_bit(TMR_RUNNING_MPR, &ifmsh->timers_running); return; } ieee80211_queue_work(&local->hw, &sdata->work); } void ieee80211_mesh_root_setup(struct ieee80211_if_mesh *ifmsh) { if (ifmsh->mshcfg.dot11MeshHWMPRootMode) set_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags); else { clear_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags); /* stop running timer */ del_timer_sync(&ifmsh->mesh_path_root_timer); } } /** * ieee80211_fill_mesh_addresses - fill addresses of a locally originated mesh frame * @hdr: 802.11 frame header * @fc: frame control field * @meshda: destination address in the mesh * @meshsa: source address address in the mesh. Same as TA, as frame is * locally originated. * * Return the length of the 802.11 (does not include a mesh control header) */ int ieee80211_fill_mesh_addresses(struct ieee80211_hdr *hdr, __le16 *fc, const u8 *meshda, const u8 *meshsa) { if (is_multicast_ether_addr(meshda)) { *fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS); /* DA TA SA */ memcpy(hdr->addr1, meshda, ETH_ALEN); memcpy(hdr->addr2, meshsa, ETH_ALEN); memcpy(hdr->addr3, meshsa, ETH_ALEN); return 24; } else { *fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS); /* RA TA DA SA */ memset(hdr->addr1, 0, ETH_ALEN); /* RA is resolved later */ memcpy(hdr->addr2, meshsa, ETH_ALEN); memcpy(hdr->addr3, meshda, ETH_ALEN); memcpy(hdr->addr4, meshsa, ETH_ALEN); return 30; } } /** * ieee80211_new_mesh_header - create a new mesh header * @meshhdr: uninitialized mesh header * @sdata: mesh interface to be used * @addr4or5: 1st address in the ae header, which may correspond to address 4 * (if addr6 is NULL) or address 5 (if addr6 is present). It may * be NULL. * @addr6: 2nd address in the ae header, which corresponds to addr6 of the * mesh frame * * Return the header length. */ int ieee80211_new_mesh_header(struct ieee80211s_hdr *meshhdr, struct ieee80211_sub_if_data *sdata, char *addr4or5, char *addr6) { int aelen = 0; BUG_ON(!addr4or5 && addr6); memset(meshhdr, 0, sizeof(*meshhdr)); meshhdr->ttl = sdata->u.mesh.mshcfg.dot11MeshTTL; put_unaligned(cpu_to_le32(sdata->u.mesh.mesh_seqnum), &meshhdr->seqnum); sdata->u.mesh.mesh_seqnum++; if (addr4or5 && !addr6) { meshhdr->flags |= MESH_FLAGS_AE_A4; aelen += ETH_ALEN; memcpy(meshhdr->eaddr1, addr4or5, ETH_ALEN); } else if (addr4or5 && addr6) { meshhdr->flags |= MESH_FLAGS_AE_A5_A6; aelen += 2 * ETH_ALEN; memcpy(meshhdr->eaddr1, addr4or5, ETH_ALEN); memcpy(meshhdr->eaddr2, addr6, ETH_ALEN); } return 6 + aelen; } static void ieee80211_mesh_housekeeping(struct ieee80211_sub_if_data *sdata, struct ieee80211_if_mesh *ifmsh) { bool free_plinks; #ifdef CONFIG_MAC80211_VERBOSE_DEBUG printk(KERN_DEBUG "%s: running mesh housekeeping\n", sdata->name); #endif ieee80211_sta_expire(sdata, IEEE80211_MESH_PEER_INACTIVITY_LIMIT); mesh_path_expire(sdata); free_plinks = mesh_plink_availables(sdata); if (free_plinks != sdata->u.mesh.accepting_plinks) ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON); mod_timer(&ifmsh->housekeeping_timer, round_jiffies(jiffies + IEEE80211_MESH_HOUSEKEEPING_INTERVAL)); } static void ieee80211_mesh_rootpath(struct ieee80211_sub_if_data *sdata) { struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; mesh_path_tx_root_frame(sdata); mod_timer(&ifmsh->mesh_path_root_timer, round_jiffies(jiffies + IEEE80211_MESH_RANN_INTERVAL)); } #ifdef CONFIG_PM void ieee80211_mesh_quiesce(struct ieee80211_sub_if_data *sdata) { struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; /* use atomic bitops in case both timers fire at the same time */ if (del_timer_sync(&ifmsh->housekeeping_timer)) set_bit(TMR_RUNNING_HK, &ifmsh->timers_running); if (del_timer_sync(&ifmsh->mesh_path_timer)) set_bit(TMR_RUNNING_MP, &ifmsh->timers_running); if (del_timer_sync(&ifmsh->mesh_path_root_timer)) set_bit(TMR_RUNNING_MPR, &ifmsh->timers_running); } void ieee80211_mesh_restart(struct ieee80211_sub_if_data *sdata) { struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; if (test_and_clear_bit(TMR_RUNNING_HK, &ifmsh->timers_running)) add_timer(&ifmsh->housekeeping_timer); if (test_and_clear_bit(TMR_RUNNING_MP, &ifmsh->timers_running)) add_timer(&ifmsh->mesh_path_timer); if (test_and_clear_bit(TMR_RUNNING_MPR, &ifmsh->timers_running)) add_timer(&ifmsh->mesh_path_root_timer); ieee80211_mesh_root_setup(ifmsh); } #endif void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata) { struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; struct ieee80211_local *local = sdata->local; local->fif_other_bss++; /* mesh ifaces must set allmulti to forward mcast traffic */ atomic_inc(&local->iff_allmultis); ieee80211_configure_filter(local); ifmsh->mesh_cc_id = 0; /* Disabled */ ifmsh->mesh_sp_id = 0; /* Neighbor Offset */ ifmsh->mesh_auth_id = 0; /* Disabled */ set_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags); ieee80211_mesh_root_setup(ifmsh); ieee80211_queue_work(&local->hw, &sdata->work); sdata->vif.bss_conf.beacon_int = MESH_DEFAULT_BEACON_INTERVAL; ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON | BSS_CHANGED_BEACON_ENABLED | BSS_CHANGED_BEACON_INT); } void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata) { struct ieee80211_local *local = sdata->local; struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; ifmsh->mesh_id_len = 0; ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED); sta_info_flush(local, NULL); del_timer_sync(&sdata->u.mesh.housekeeping_timer); del_timer_sync(&sdata->u.mesh.mesh_path_root_timer); /* * If the timer fired while we waited for it, it will have * requeued the work. Now the work will be running again * but will not rearm the timer again because it checks * whether the interface is running, which, at this point, * it no longer is. */ cancel_work_sync(&sdata->work); local->fif_other_bss--; atomic_dec(&local->iff_allmultis); ieee80211_configure_filter(local); } static void ieee80211_mesh_rx_bcn_presp(struct ieee80211_sub_if_data *sdata, u16 stype, struct ieee80211_mgmt *mgmt, size_t len, struct ieee80211_rx_status *rx_status) { struct ieee80211_local *local = sdata->local; struct ieee802_11_elems elems; struct ieee80211_channel *channel; u32 supp_rates = 0; size_t baselen; int freq; enum ieee80211_band band = rx_status->band; /* ignore ProbeResp to foreign address */ if (stype == IEEE80211_STYPE_PROBE_RESP && compare_ether_addr(mgmt->da, sdata->vif.addr)) return; baselen = (u8 *) mgmt->u.probe_resp.variable - (u8 *) mgmt; if (baselen > len) return; ieee802_11_parse_elems(mgmt->u.probe_resp.variable, len - baselen, &elems); if (elems.ds_params && elems.ds_params_len == 1) freq = ieee80211_channel_to_frequency(elems.ds_params[0]); else freq = rx_status->freq; channel = ieee80211_get_channel(local->hw.wiphy, freq); if (!channel || channel->flags & IEEE80211_CHAN_DISABLED) return; if (elems.mesh_id && elems.mesh_config && mesh_matches_local(&elems, sdata)) { supp_rates = ieee80211_sta_get_rates(local, &elems, band); mesh_neighbour_update(mgmt->sa, supp_rates, sdata, mesh_peer_accepts_plinks(&elems)); } } static void ieee80211_mesh_rx_mgmt_action(struct ieee80211_sub_if_data *sdata, struct ieee80211_mgmt *mgmt, size_t len, struct ieee80211_rx_status *rx_status) { switch (mgmt->u.action.category) { case WLAN_CATEGORY_MESH_PLINK: mesh_rx_plink_frame(sdata, mgmt, len, rx_status); break; case WLAN_CATEGORY_MESH_PATH_SEL: mesh_rx_path_sel_frame(sdata, mgmt, len); break; } } void ieee80211_mesh_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb) { struct ieee80211_rx_status *rx_status; struct ieee80211_if_mesh *ifmsh; struct ieee80211_mgmt *mgmt; u16 stype; ifmsh = &sdata->u.mesh; rx_status = IEEE80211_SKB_RXCB(skb); mgmt = (struct ieee80211_mgmt *) skb->data; stype = le16_to_cpu(mgmt->frame_control) & IEEE80211_FCTL_STYPE; switch (stype) { case IEEE80211_STYPE_PROBE_RESP: case IEEE80211_STYPE_BEACON: ieee80211_mesh_rx_bcn_presp(sdata, stype, mgmt, skb->len, rx_status); break; case IEEE80211_STYPE_ACTION: ieee80211_mesh_rx_mgmt_action(sdata, mgmt, skb->len, rx_status); break; } } void ieee80211_mesh_work(struct ieee80211_sub_if_data *sdata) { struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; if (ifmsh->preq_queue_len && time_after(jiffies, ifmsh->last_preq + msecs_to_jiffies(ifmsh->mshcfg.dot11MeshHWMPpreqMinInterval))) mesh_path_start_discovery(sdata); if (test_and_clear_bit(MESH_WORK_GROW_MPATH_TABLE, &ifmsh->wrkq_flags)) mesh_mpath_table_grow(); if (test_and_clear_bit(MESH_WORK_GROW_MPATH_TABLE, &ifmsh->wrkq_flags)) mesh_mpp_table_grow(); if (test_and_clear_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags)) ieee80211_mesh_housekeeping(sdata, ifmsh); if (test_and_clear_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags)) ieee80211_mesh_rootpath(sdata); } void ieee80211_mesh_notify_scan_completed(struct ieee80211_local *local) { struct ieee80211_sub_if_data *sdata; rcu_read_lock(); list_for_each_entry_rcu(sdata, &local->interfaces, list) if (ieee80211_vif_is_mesh(&sdata->vif)) ieee80211_queue_work(&local->hw, &sdata->work); rcu_read_unlock(); } void ieee80211_mesh_init_sdata(struct ieee80211_sub_if_data *sdata) { struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; setup_timer(&ifmsh->housekeeping_timer, ieee80211_mesh_housekeeping_timer, (unsigned long) sdata); ifmsh->accepting_plinks = true; ifmsh->preq_id = 0; ifmsh->sn = 0; atomic_set(&ifmsh->mpaths, 0); mesh_rmc_init(sdata); ifmsh->last_preq = jiffies; /* Allocate all mesh structures when creating the first mesh interface. */ if (!mesh_allocated) ieee80211s_init(); setup_timer(&ifmsh->mesh_path_timer, ieee80211_mesh_path_timer, (unsigned long) sdata); setup_timer(&ifmsh->mesh_path_root_timer, ieee80211_mesh_path_root_timer, (unsigned long) sdata); INIT_LIST_HEAD(&ifmsh->preq_queue.list); spin_lock_init(&ifmsh->mesh_preq_queue_lock); }