/***************************************************************************** * sdlapci.h WANPIPE(tm) Multiprotocol WAN Link Driver. * Definitions for the SDLA PCI adapter. * * Author: Gideon Hack <ghack@sangoma.com> * * Copyright: (c) 1999-2000 Sangoma Technologies Inc. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. * ============================================================================ * Jun 02, 1999 Gideon Hack Initial version. *****************************************************************************/ #ifndef _SDLAPCI_H #define _SDLAPCI_H /****** Defines *************************************************************/ /* Definitions for identifying and finding S514 PCI adapters */ #define V3_VENDOR_ID 0x11B0 /* V3 vendor ID number */ #define V3_DEVICE_ID 0x0002 /* V3 device ID number */ #define SANGOMA_SUBSYS_VENDOR 0x4753 /* ID for Sangoma */ #define PCI_DEV_SLOT_MASK 0x1F /* mask for slot numbering */ #define PCI_IRQ_NOT_ALLOCATED 0xFF /* interrupt line for no IRQ */ /* Local PCI register offsets */ #define PCI_VENDOR_ID_WORD 0x00 /* vendor ID */ #define PCI_IO_BASE_DWORD 0x10 /* IO base */ #define PCI_MEM_BASE0_DWORD 0x14 /* memory base - apperture 0 */ #define PCI_MEM_BASE1_DWORD 0x18 /* memory base - apperture 1 */ #define PCI_SUBSYS_VENDOR_WORD 0x2C /* subsystem vendor ID */ #define PCI_INT_LINE_BYTE 0x3C /* interrupt line */ #define PCI_INT_PIN_BYTE 0x3D /* interrupt pin */ #define PCI_MAP0_DWORD 0x40 /* PCI to local bus address 0 */ #define PCI_MAP1_DWORD 0x44 /* PCI to local bus address 1 */ #define PCI_INT_STATUS 0x48 /* interrupt status */ #define PCI_INT_CONFIG 0x4C /* interrupt configuration */ /* Local PCI register usage */ #define PCI_MEMORY_ENABLE 0x00000003 /* enable PCI memory */ #define PCI_CPU_A_MEM_DISABLE 0x00000002 /* disable CPU A memory */ #define PCI_CPU_B_MEM_DISABLE 0x00100002 /* disable CPU B memory */ #define PCI_ENABLE_IRQ_CPU_A 0x005A0004 /* enable IRQ for CPU A */ #define PCI_ENABLE_IRQ_CPU_B 0x005A0008 /* enable IRQ for CPU B */ #define PCI_DISABLE_IRQ_CPU_A 0x00000004 /* disable IRQ for CPU A */ #define PCI_DISABLE_IRQ_CPU_B 0x00000008 /* disable IRQ for CPU B */ /* Setting for the Interrupt Status register */ #define IRQ_CPU_A 0x04 /* IRQ for CPU A */ #define IRQ_CPU_B 0x08 /* IRQ for CPU B */ /* The maximum size of the S514 memory */ #define MAX_SIZEOF_S514_MEMORY (256 * 1024) /* S514 control register offsets within the memory address space */ #define S514_CTRL_REG_BYTE 0x80000 /* S514 adapter control bytes */ #define S514_CPU_HALT 0x00 #define S514_CPU_START 0x01 /* The maximum number of S514 adapters supported */ #define MAX_S514_CARDS 20 #define PCI_CARD_TYPE 0x2E #define S514_DUAL_CPU 0x12 #define S514_SINGLE_CPU 0x11 #endif /* _SDLAPCI_H */