/* * OHCI HCD (Host Controller Driver) for USB. * * (C) Copyright 1999 Roman Weissgaerber * (C) Copyright 2000-2002 David Brownell * (C) Copyright 2002 Hewlett-Packard Company * * USB Bus Glue for Samsung S3C2410 * * Written by Christopher Hoover * Based on fragments of previous driver by Russell King et al. * * Modified for S3C2410 from ohci-sa1111.c, ohci-omap.c and ohci-lh7a40.c * by Ben Dooks, * Copyright (C) 2004 Simtec Electronics * * Thanks to basprog@mail.ru for updates to newer kernels * * This file is licenced under the GPL. */ #include #include #include #include #include #include #include #include #include "ohci.h" #define valid_port(idx) ((idx) == 1 || (idx) == 2) /* clock device associated with the hcd */ #define DRIVER_DESC "OHCI S3C2410 driver" static const char hcd_name[] = "ohci-s3c2410"; static struct clk *clk; static struct clk *usb_clk; /* forward definitions */ static int (*orig_ohci_hub_control)(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex, char *buf, u16 wLength); static int (*orig_ohci_hub_status_data)(struct usb_hcd *hcd, char *buf); static void s3c2410_hcd_oc(struct s3c2410_hcd_info *info, int port_oc); /* conversion functions */ static struct s3c2410_hcd_info *to_s3c2410_info(struct usb_hcd *hcd) { return dev_get_platdata(hcd->self.controller); } static void s3c2410_start_hc(struct platform_device *dev, struct usb_hcd *hcd) { struct s3c2410_hcd_info *info = dev_get_platdata(&dev->dev); dev_dbg(&dev->dev, "s3c2410_start_hc:\n"); clk_prepare_enable(usb_clk); mdelay(2); /* let the bus clock stabilise */ clk_prepare_enable(clk); if (info != NULL) { info->hcd = hcd; info->report_oc = s3c2410_hcd_oc; if (info->enable_oc != NULL) (info->enable_oc)(info, 1); } } static void s3c2410_stop_hc(struct platform_device *dev) { struct s3c2410_hcd_info *info = dev_get_platdata(&dev->dev); dev_dbg(&dev->dev, "s3c2410_stop_hc:\n"); if (info != NULL) { info->report_oc = NULL; info->hcd = NULL; if (info->enable_oc != NULL) (info->enable_oc)(info, 0); } clk_disable_unprepare(clk); clk_disable_unprepare(usb_clk); } /* ohci_s3c2410_hub_status_data * * update the status data from the hub with anything that * has been detected by our system */ static int ohci_s3c2410_hub_status_data(struct usb_hcd *hcd, char *buf) { struct s3c2410_hcd_info *info = to_s3c2410_info(hcd); struct s3c2410_hcd_port *port; int orig; int portno; orig = orig_ohci_hub_status_data(hcd, buf); if (info == NULL) return orig; port = &info->port[0]; /* mark any changed port as changed */ for (portno = 0; portno < 2; port++, portno++) { if (port->oc_changed == 1 && port->flags & S3C_HCDFLG_USED) { dev_dbg(hcd->self.controller, "oc change on port %d\n", portno); if (orig < 1) orig = 1; buf[0] |= 1<<(portno+1); } } return orig; } /* s3c2410_usb_set_power * * configure the power on a port, by calling the platform device * routine registered with the platform device */ static void s3c2410_usb_set_power(struct s3c2410_hcd_info *info, int port, int to) { if (info == NULL) return; if (info->power_control != NULL) { info->port[port-1].power = to; (info->power_control)(port-1, to); } } /* ohci_s3c2410_hub_control * * look at control requests to the hub, and see if we need * to take any action or over-ride the results from the * request. */ static int ohci_s3c2410_hub_control( struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex, char *buf, u16 wLength) { struct s3c2410_hcd_info *info = to_s3c2410_info(hcd); struct usb_hub_descriptor *desc; int ret = -EINVAL; u32 *data = (u32 *)buf; dev_dbg(hcd->self.controller, "s3c2410_hub_control(%p,0x%04x,0x%04x,0x%04x,%p,%04x)\n", hcd, typeReq, wValue, wIndex, buf, wLength); /* if we are only an humble host without any special capabilities * process the request straight away and exit */ if (info == NULL) { ret = orig_ohci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength); goto out; } /* check the request to see if it needs handling */ switch (typeReq) { case SetPortFeature: if (wValue == USB_PORT_FEAT_POWER) { dev_dbg(hcd->self.controller, "SetPortFeat: POWER\n"); s3c2410_usb_set_power(info, wIndex, 1); goto out; } break; case ClearPortFeature: switch (wValue) { case USB_PORT_FEAT_C_OVER_CURRENT: dev_dbg(hcd->self.controller, "ClearPortFeature: C_OVER_CURRENT\n"); if (valid_port(wIndex)) { info->port[wIndex-1].oc_changed = 0; info->port[wIndex-1].oc_status = 0; } goto out; case USB_PORT_FEAT_OVER_CURRENT: dev_dbg(hcd->self.controller, "ClearPortFeature: OVER_CURRENT\n"); if (valid_port(wIndex)) info->port[wIndex-1].oc_status = 0; goto out; case USB_PORT_FEAT_POWER: dev_dbg(hcd->self.controller, "ClearPortFeature: POWER\n"); if (valid_port(wIndex)) { s3c2410_usb_set_power(info, wIndex, 0); return 0; } } break; } ret = orig_ohci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength); if (ret) goto out; switch (typeReq) { case GetHubDescriptor: /* update the hub's descriptor */ desc = (struct usb_hub_descriptor *)buf; if (info->power_control == NULL) return ret; dev_dbg(hcd->self.controller, "wHubCharacteristics 0x%04x\n", desc->wHubCharacteristics); /* remove the old configurations for power-switching, and * over-current protection, and insert our new configuration */ desc->wHubCharacteristics &= ~cpu_to_le16(HUB_CHAR_LPSM); desc->wHubCharacteristics |= cpu_to_le16(0x0001); if (info->enable_oc) { desc->wHubCharacteristics &= ~cpu_to_le16( HUB_CHAR_OCPM); desc->wHubCharacteristics |= cpu_to_le16( 0x0008 | 0x0001); } dev_dbg(hcd->self.controller, "wHubCharacteristics after 0x%04x\n", desc->wHubCharacteristics); return ret; case GetPortStatus: /* check port status */ dev_dbg(hcd->self.controller, "GetPortStatus(%d)\n", wIndex); if (valid_port(wIndex)) { if (info->port[wIndex-1].oc_changed) *data |= cpu_to_le32(RH_PS_OCIC); if (info->port[wIndex-1].oc_status) *data |= cpu_to_le32(RH_PS_POCI); } } out: return ret; } /* s3c2410_hcd_oc * * handle an over-current report */ static void s3c2410_hcd_oc(struct s3c2410_hcd_info *info, int port_oc) { struct s3c2410_hcd_port *port; struct usb_hcd *hcd; unsigned long flags; int portno; if (info == NULL) return; port = &info->port[0]; hcd = info->hcd; local_irq_save(flags); for (portno = 0; portno < 2; port++, portno++) { if (port_oc & (1<flags & S3C_HCDFLG_USED) { port->oc_status = 1; port->oc_changed = 1; /* ok, once over-current is detected, the port needs to be powered down */ s3c2410_usb_set_power(info, portno+1, 0); } } local_irq_restore(flags); } /* may be called without controller electrically present */ /* may be called with controller, bus, and devices active */ /* * usb_hcd_s3c2410_remove - shutdown processing for HCD * @dev: USB Host Controller being removed * Context: !in_interrupt() * * Reverses the effect of usb_hcd_3c2410_probe(), first invoking * the HCD's stop() method. It is always called from a thread * context, normally "rmmod", "apmd", or something similar. * */ static void usb_hcd_s3c2410_remove(struct usb_hcd *hcd, struct platform_device *dev) { usb_remove_hcd(hcd); s3c2410_stop_hc(dev); usb_put_hcd(hcd); } /** * usb_hcd_s3c2410_probe - initialize S3C2410-based HCDs * Context: !in_interrupt() * * Allocates basic resources for this USB host controller, and * then invokes the start() method for the HCD associated with it * through the hotplug entry's driver_data. * */ static int usb_hcd_s3c2410_probe(const struct hc_driver *driver, struct platform_device *dev) { struct usb_hcd *hcd = NULL; struct s3c2410_hcd_info *info = dev_get_platdata(&dev->dev); int retval; s3c2410_usb_set_power(info, 1, 1); s3c2410_usb_set_power(info, 2, 1); hcd = usb_create_hcd(driver, &dev->dev, "s3c24xx"); if (hcd == NULL) return -ENOMEM; hcd->rsrc_start = dev->resource[0].start; hcd->rsrc_len = resource_size(&dev->resource[0]); hcd->regs = devm_ioremap_resource(&dev->dev, &dev->resource[0]); if (IS_ERR(hcd->regs)) { retval = PTR_ERR(hcd->regs); goto err_put; } clk = devm_clk_get(&dev->dev, "usb-host"); if (IS_ERR(clk)) { dev_err(&dev->dev, "cannot get usb-host clock\n"); retval = PTR_ERR(clk); goto err_put; } usb_clk = devm_clk_get(&dev->dev, "usb-bus-host"); if (IS_ERR(usb_clk)) { dev_err(&dev->dev, "cannot get usb-bus-host clock\n"); retval = PTR_ERR(usb_clk); goto err_put; } s3c2410_start_hc(dev, hcd); retval = usb_add_hcd(hcd, dev->resource[1].start, 0); if (retval != 0) goto err_ioremap; return 0; err_ioremap: s3c2410_stop_hc(dev); err_put: usb_put_hcd(hcd); return retval; } /*-------------------------------------------------------------------------*/ static struct hc_driver __read_mostly ohci_s3c2410_hc_driver; static int ohci_hcd_s3c2410_drv_probe(struct platform_device *pdev) { return usb_hcd_s3c2410_probe(&ohci_s3c2410_hc_driver, pdev); } static int ohci_hcd_s3c2410_drv_remove(struct platform_device *pdev) { struct usb_hcd *hcd = platform_get_drvdata(pdev); usb_hcd_s3c2410_remove(hcd, pdev); return 0; } #ifdef CONFIG_PM static int ohci_hcd_s3c2410_drv_suspend(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); struct platform_device *pdev = to_platform_device(dev); bool do_wakeup = device_may_wakeup(dev); int rc = 0; rc = ohci_suspend(hcd, do_wakeup); if (rc) return rc; s3c2410_stop_hc(pdev); return rc; } static int ohci_hcd_s3c2410_drv_resume(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); struct platform_device *pdev = to_platform_device(dev); s3c2410_start_hc(pdev, hcd); ohci_resume(hcd, false); return 0; } #else #define ohci_hcd_s3c2410_drv_suspend NULL #define ohci_hcd_s3c2410_drv_resume NULL #endif static const struct dev_pm_ops ohci_hcd_s3c2410_pm_ops = { .suspend = ohci_hcd_s3c2410_drv_suspend, .resume = ohci_hcd_s3c2410_drv_resume, }; static struct platform_driver ohci_hcd_s3c2410_driver = { .probe = ohci_hcd_s3c2410_drv_probe, .remove = ohci_hcd_s3c2410_drv_remove, .shutdown = usb_hcd_platform_shutdown, .driver = { .owner = THIS_MODULE, .name = "s3c2410-ohci", .pm = &ohci_hcd_s3c2410_pm_ops, }, }; static int __init ohci_s3c2410_init(void) { if (usb_disabled()) return -ENODEV; pr_info("%s: " DRIVER_DESC "\n", hcd_name); ohci_init_driver(&ohci_s3c2410_hc_driver, NULL); /* * The Samsung HW has some unusual quirks, which require * Sumsung-specific workarounds. We override certain hc_driver * functions here to achieve that. We explicitly do not enhance * ohci_driver_overrides to allow this more easily, since this * is an unusual case, and we don't want to encourage others to * override these functions by making it too easy. */ orig_ohci_hub_control = ohci_s3c2410_hc_driver.hub_control; orig_ohci_hub_status_data = ohci_s3c2410_hc_driver.hub_status_data; ohci_s3c2410_hc_driver.hub_status_data = ohci_s3c2410_hub_status_data; ohci_s3c2410_hc_driver.hub_control = ohci_s3c2410_hub_control; return platform_driver_register(&ohci_hcd_s3c2410_driver); } module_init(ohci_s3c2410_init); static void __exit ohci_s3c2410_cleanup(void) { platform_driver_unregister(&ohci_hcd_s3c2410_driver); } module_exit(ohci_s3c2410_cleanup); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:s3c2410-ohci");