/* * sata_vsc.c - Vitesse VSC7174 4 port DPA SATA * * Maintained by: Jeremy Higdon @ SGI * Please ALWAYS copy linux-ide@vger.kernel.org * on emails. * * Copyright 2004 SGI * * Bits from Jeff Garzik, Copyright RedHat, Inc. * * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2, or (at your option) * any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; see the file COPYING. If not, write to * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. * * * libata documentation is available via 'make {ps|pdf}docs', * as Documentation/DocBook/libata.* * * Vitesse hardware documentation presumably available under NDA. * Intel 31244 (same hardware interface) documentation presumably * available from http://developer.intel.com/ * */ #include <linux/kernel.h> #include <linux/module.h> #include <linux/pci.h> #include <linux/init.h> #include <linux/blkdev.h> #include <linux/delay.h> #include <linux/interrupt.h> #include <linux/dma-mapping.h> #include "scsi.h" #include <scsi/scsi_host.h> #include <linux/libata.h> #define DRV_NAME "sata_vsc" #define DRV_VERSION "1.0" /* Interrupt register offsets (from chip base address) */ #define VSC_SATA_INT_STAT_OFFSET 0x00 #define VSC_SATA_INT_MASK_OFFSET 0x04 /* Taskfile registers offsets */ #define VSC_SATA_TF_CMD_OFFSET 0x00 #define VSC_SATA_TF_DATA_OFFSET 0x00 #define VSC_SATA_TF_ERROR_OFFSET 0x04 #define VSC_SATA_TF_FEATURE_OFFSET 0x06 #define VSC_SATA_TF_NSECT_OFFSET 0x08 #define VSC_SATA_TF_LBAL_OFFSET 0x0c #define VSC_SATA_TF_LBAM_OFFSET 0x10 #define VSC_SATA_TF_LBAH_OFFSET 0x14 #define VSC_SATA_TF_DEVICE_OFFSET 0x18 #define VSC_SATA_TF_STATUS_OFFSET 0x1c #define VSC_SATA_TF_COMMAND_OFFSET 0x1d #define VSC_SATA_TF_ALTSTATUS_OFFSET 0x28 #define VSC_SATA_TF_CTL_OFFSET 0x29 /* DMA base */ #define VSC_SATA_UP_DESCRIPTOR_OFFSET 0x64 #define VSC_SATA_UP_DATA_BUFFER_OFFSET 0x6C #define VSC_SATA_DMA_CMD_OFFSET 0x70 /* SCRs base */ #define VSC_SATA_SCR_STATUS_OFFSET 0x100 #define VSC_SATA_SCR_ERROR_OFFSET 0x104 #define VSC_SATA_SCR_CONTROL_OFFSET 0x108 /* Port stride */ #define VSC_SATA_PORT_OFFSET 0x200 static u32 vsc_sata_scr_read (struct ata_port *ap, unsigned int sc_reg) { if (sc_reg > SCR_CONTROL) return 0xffffffffU; return readl((void *) ap->ioaddr.scr_addr + (sc_reg * 4)); } static void vsc_sata_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val) { if (sc_reg > SCR_CONTROL) return; writel(val, (void *) ap->ioaddr.scr_addr + (sc_reg * 4)); } static void vsc_intr_mask_update(struct ata_port *ap, u8 ctl) { unsigned long mask_addr; u8 mask; mask_addr = (unsigned long) ap->host_set->mmio_base + VSC_SATA_INT_MASK_OFFSET + ap->port_no; mask = readb(mask_addr); if (ctl & ATA_NIEN) mask |= 0x80; else mask &= 0x7F; writeb(mask, mask_addr); } static void vsc_sata_tf_load(struct ata_port *ap, struct ata_taskfile *tf) { struct ata_ioports *ioaddr = &ap->ioaddr; unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; /* * The only thing the ctl register is used for is SRST. * That is not enabled or disabled via tf_load. * However, if ATA_NIEN is changed, then we need to change the interrupt register. */ if ((tf->ctl & ATA_NIEN) != (ap->last_ctl & ATA_NIEN)) { ap->last_ctl = tf->ctl; vsc_intr_mask_update(ap, tf->ctl & ATA_NIEN); } if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { writew(tf->feature | (((u16)tf->hob_feature) << 8), ioaddr->feature_addr); writew(tf->nsect | (((u16)tf->hob_nsect) << 8), ioaddr->nsect_addr); writew(tf->lbal | (((u16)tf->hob_lbal) << 8), ioaddr->lbal_addr); writew(tf->lbam | (((u16)tf->hob_lbam) << 8), ioaddr->lbam_addr); writew(tf->lbah | (((u16)tf->hob_lbah) << 8), ioaddr->lbah_addr); } else if (is_addr) { writew(tf->feature, ioaddr->feature_addr); writew(tf->nsect, ioaddr->nsect_addr); writew(tf->lbal, ioaddr->lbal_addr); writew(tf->lbam, ioaddr->lbam_addr); writew(tf->lbah, ioaddr->lbah_addr); } if (tf->flags & ATA_TFLAG_DEVICE) writeb(tf->device, ioaddr->device_addr); ata_wait_idle(ap); } static void vsc_sata_tf_read(struct ata_port *ap, struct ata_taskfile *tf) { struct ata_ioports *ioaddr = &ap->ioaddr; u16 nsect, lbal, lbam, lbah; nsect = tf->nsect = readw(ioaddr->nsect_addr); lbal = tf->lbal = readw(ioaddr->lbal_addr); lbam = tf->lbam = readw(ioaddr->lbam_addr); lbah = tf->lbah = readw(ioaddr->lbah_addr); tf->device = readw(ioaddr->device_addr); if (tf->flags & ATA_TFLAG_LBA48) { tf->hob_feature = readb(ioaddr->error_addr); tf->hob_nsect = nsect >> 8; tf->hob_lbal = lbal >> 8; tf->hob_lbam = lbam >> 8; tf->hob_lbah = lbah >> 8; } } /* * vsc_sata_interrupt * * Read the interrupt register and process for the devices that have them pending. */ static irqreturn_t vsc_sata_interrupt (int irq, void *dev_instance, struct pt_regs *regs) { struct ata_host_set *host_set = dev_instance; unsigned int i; unsigned int handled = 0; u32 int_status; spin_lock(&host_set->lock); int_status = readl(host_set->mmio_base + VSC_SATA_INT_STAT_OFFSET); for (i = 0; i < host_set->n_ports; i++) { if (int_status & ((u32) 0xFF << (8 * i))) { struct ata_port *ap; ap = host_set->ports[i]; if (ap && !(ap->flags & (ATA_FLAG_PORT_DISABLED|ATA_FLAG_NOINTR))) { struct ata_queued_cmd *qc; qc = ata_qc_from_tag(ap, ap->active_tag); if (qc && (!(qc->tf.ctl & ATA_NIEN))) handled += ata_host_intr(ap, qc); } } } spin_unlock(&host_set->lock); return IRQ_RETVAL(handled); } static Scsi_Host_Template vsc_sata_sht = { .module = THIS_MODULE, .name = DRV_NAME, .ioctl = ata_scsi_ioctl, .queuecommand = ata_scsi_queuecmd, .eh_strategy_handler = ata_scsi_error, .can_queue = ATA_DEF_QUEUE, .this_id = ATA_SHT_THIS_ID, .sg_tablesize = LIBATA_MAX_PRD, .max_sectors = ATA_MAX_SECTORS, .cmd_per_lun = ATA_SHT_CMD_PER_LUN, .emulated = ATA_SHT_EMULATED, .use_clustering = ATA_SHT_USE_CLUSTERING, .proc_name = DRV_NAME, .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, .bios_param = ata_std_bios_param, .ordered_flush = 1, }; static struct ata_port_operations vsc_sata_ops = { .port_disable = ata_port_disable, .tf_load = vsc_sata_tf_load, .tf_read = vsc_sata_tf_read, .exec_command = ata_exec_command, .check_status = ata_check_status, .dev_select = ata_std_dev_select, .phy_reset = sata_phy_reset, .bmdma_setup = ata_bmdma_setup, .bmdma_start = ata_bmdma_start, .bmdma_stop = ata_bmdma_stop, .bmdma_status = ata_bmdma_status, .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, .eng_timeout = ata_eng_timeout, .irq_handler = vsc_sata_interrupt, .irq_clear = ata_bmdma_irq_clear, .scr_read = vsc_sata_scr_read, .scr_write = vsc_sata_scr_write, .port_start = ata_port_start, .port_stop = ata_port_stop, .host_stop = ata_host_stop, }; static void __devinit vsc_sata_setup_port(struct ata_ioports *port, unsigned long base) { port->cmd_addr = base + VSC_SATA_TF_CMD_OFFSET; port->data_addr = base + VSC_SATA_TF_DATA_OFFSET; port->error_addr = base + VSC_SATA_TF_ERROR_OFFSET; port->feature_addr = base + VSC_SATA_TF_FEATURE_OFFSET; port->nsect_addr = base + VSC_SATA_TF_NSECT_OFFSET; port->lbal_addr = base + VSC_SATA_TF_LBAL_OFFSET; port->lbam_addr = base + VSC_SATA_TF_LBAM_OFFSET; port->lbah_addr = base + VSC_SATA_TF_LBAH_OFFSET; port->device_addr = base + VSC_SATA_TF_DEVICE_OFFSET; port->status_addr = base + VSC_SATA_TF_STATUS_OFFSET; port->command_addr = base + VSC_SATA_TF_COMMAND_OFFSET; port->altstatus_addr = base + VSC_SATA_TF_ALTSTATUS_OFFSET; port->ctl_addr = base + VSC_SATA_TF_CTL_OFFSET; port->bmdma_addr = base + VSC_SATA_DMA_CMD_OFFSET; port->scr_addr = base + VSC_SATA_SCR_STATUS_OFFSET; writel(0, base + VSC_SATA_UP_DESCRIPTOR_OFFSET); writel(0, base + VSC_SATA_UP_DATA_BUFFER_OFFSET); } static int __devinit vsc_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version; struct ata_probe_ent *probe_ent = NULL; unsigned long base; int pci_dev_busy = 0; void *mmio_base; int rc; if (!printed_version++) printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n"); rc = pci_enable_device(pdev); if (rc) return rc; /* * Check if we have needed resource mapped. */ if (pci_resource_len(pdev, 0) == 0) { rc = -ENODEV; goto err_out; } rc = pci_request_regions(pdev, DRV_NAME); if (rc) { pci_dev_busy = 1; goto err_out; } /* * Use 32 bit DMA mask, because 64 bit address support is poor. */ rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK); if (rc) goto err_out_regions; rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); if (rc) goto err_out_regions; probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL); if (probe_ent == NULL) { rc = -ENOMEM; goto err_out_regions; } memset(probe_ent, 0, sizeof(*probe_ent)); probe_ent->dev = pci_dev_to_dev(pdev); INIT_LIST_HEAD(&probe_ent->node); mmio_base = ioremap(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0)); if (mmio_base == NULL) { rc = -ENOMEM; goto err_out_free_ent; } base = (unsigned long) mmio_base; /* * Due to a bug in the chip, the default cache line size can't be used */ pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, 0x80); probe_ent->sht = &vsc_sata_sht; probe_ent->host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO | ATA_FLAG_SATA_RESET; probe_ent->port_ops = &vsc_sata_ops; probe_ent->n_ports = 4; probe_ent->irq = pdev->irq; probe_ent->irq_flags = SA_SHIRQ; probe_ent->mmio_base = mmio_base; /* We don't care much about the PIO/UDMA masks, but the core won't like us * if we don't fill these */ probe_ent->pio_mask = 0x1f; probe_ent->mwdma_mask = 0x07; probe_ent->udma_mask = 0x7f; /* We have 4 ports per PCI function */ vsc_sata_setup_port(&probe_ent->port[0], base + 1 * VSC_SATA_PORT_OFFSET); vsc_sata_setup_port(&probe_ent->port[1], base + 2 * VSC_SATA_PORT_OFFSET); vsc_sata_setup_port(&probe_ent->port[2], base + 3 * VSC_SATA_PORT_OFFSET); vsc_sata_setup_port(&probe_ent->port[3], base + 4 * VSC_SATA_PORT_OFFSET); pci_set_master(pdev); /* * Config offset 0x98 is "Extended Control and Status Register 0" * Default value is (1 << 28). All bits except bit 28 are reserved in * DPA mode. If bit 28 is set, LED 0 reflects all ports' activity. * If bit 28 is clear, each port has its own LED. */ pci_write_config_dword(pdev, 0x98, 0); /* FIXME: check ata_device_add return value */ ata_device_add(probe_ent); kfree(probe_ent); return 0; err_out_free_ent: kfree(probe_ent); err_out_regions: pci_release_regions(pdev); err_out: if (!pci_dev_busy) pci_disable_device(pdev); return rc; } /* * 0x1725/0x7174 is the Vitesse VSC-7174 * 0x8086/0x3200 is the Intel 31244, which is supposed to be identical * compatibility is untested as of yet */ static struct pci_device_id vsc_sata_pci_tbl[] = { { 0x1725, 0x7174, PCI_ANY_ID, PCI_ANY_ID, 0x10600, 0xFFFFFF, 0 }, { 0x8086, 0x3200, PCI_ANY_ID, PCI_ANY_ID, 0x10600, 0xFFFFFF, 0 }, { } }; static struct pci_driver vsc_sata_pci_driver = { .name = DRV_NAME, .id_table = vsc_sata_pci_tbl, .probe = vsc_sata_init_one, .remove = ata_pci_remove_one, }; static int __init vsc_sata_init(void) { return pci_module_init(&vsc_sata_pci_driver); } static void __exit vsc_sata_exit(void) { pci_unregister_driver(&vsc_sata_pci_driver); } MODULE_AUTHOR("Jeremy Higdon"); MODULE_DESCRIPTION("low-level driver for Vitesse VSC7174 SATA controller"); MODULE_LICENSE("GPL"); MODULE_DEVICE_TABLE(pci, vsc_sata_pci_tbl); MODULE_VERSION(DRV_VERSION); module_init(vsc_sata_init); module_exit(vsc_sata_exit);