/* * Adaptec AAC series RAID controller driver * (c) Copyright 2001 Red Hat Inc. * * based on the old aacraid driver that is.. * Adaptec aacraid device driver for Linux. * * Copyright (c) 2000 Adaptec, Inc. (aacraid@adaptec.com) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2, or (at your option) * any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; see the file COPYING. If not, write to * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. * * Module Name: * rkt.c * * Abstract: Hardware miniport for Drawbridge specific hardware functions. * */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "aacraid.h" static irqreturn_t aac_rkt_intr(int irq, void *dev_id, struct pt_regs *regs) { struct aac_dev *dev = dev_id; if (dev->new_comm_interface) { u32 Index = rkt_readl(dev, MUnit.OutboundQueue); if (Index == 0xFFFFFFFFL) Index = rkt_readl(dev, MUnit.OutboundQueue); if (Index != 0xFFFFFFFFL) { do { if (aac_intr_normal(dev, Index)) { rkt_writel(dev, MUnit.OutboundQueue, Index); rkt_writel(dev, MUnit.ODR, DoorBellAdapterNormRespReady); } Index = rkt_readl(dev, MUnit.OutboundQueue); } while (Index != 0xFFFFFFFFL); return IRQ_HANDLED; } } else { unsigned long bellbits; u8 intstat; intstat = rkt_readb(dev, MUnit.OISR); /* * Read mask and invert because drawbridge is reversed. * This allows us to only service interrupts that have * been enabled. * Check to see if this is our interrupt. If it isn't just return */ if (intstat & ~(dev->OIMR)) { bellbits = rkt_readl(dev, OutboundDoorbellReg); if (bellbits & DoorBellPrintfReady) { aac_printf(dev, rkt_readl (dev, IndexRegs.Mailbox[5])); rkt_writel(dev, MUnit.ODR,DoorBellPrintfReady); rkt_writel(dev, InboundDoorbellReg,DoorBellPrintfDone); } else if (bellbits & DoorBellAdapterNormCmdReady) { rkt_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdReady); aac_command_normal(&dev->queues->queue[HostNormCmdQueue]); // rkt_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdReady); } else if (bellbits & DoorBellAdapterNormRespReady) { rkt_writel(dev, MUnit.ODR,DoorBellAdapterNormRespReady); aac_response_normal(&dev->queues->queue[HostNormRespQueue]); } else if (bellbits & DoorBellAdapterNormCmdNotFull) { rkt_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdNotFull); } else if (bellbits & DoorBellAdapterNormRespNotFull) { rkt_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdNotFull); rkt_writel(dev, MUnit.ODR, DoorBellAdapterNormRespNotFull); } return IRQ_HANDLED; } } return IRQ_NONE; } /** * aac_rkt_disable_interrupt - Disable interrupts * @dev: Adapter */ static void aac_rkt_disable_interrupt(struct aac_dev *dev) { rkt_writeb(dev, MUnit.OIMR, dev->OIMR = 0xff); } /** * rkt_sync_cmd - send a command and wait * @dev: Adapter * @command: Command to execute * @p1: first parameter * @ret: adapter status * * This routine will send a synchronous command to the adapter and wait * for its completion. */ static int rkt_sync_cmd(struct aac_dev *dev, u32 command, u32 p1, u32 p2, u32 p3, u32 p4, u32 p5, u32 p6, u32 *status, u32 *r1, u32 *r2, u32 *r3, u32 *r4) { unsigned long start; int ok; /* * Write the command into Mailbox 0 */ rkt_writel(dev, InboundMailbox0, command); /* * Write the parameters into Mailboxes 1 - 6 */ rkt_writel(dev, InboundMailbox1, p1); rkt_writel(dev, InboundMailbox2, p2); rkt_writel(dev, InboundMailbox3, p3); rkt_writel(dev, InboundMailbox4, p4); /* * Clear the synch command doorbell to start on a clean slate. */ rkt_writel(dev, OutboundDoorbellReg, OUTBOUNDDOORBELL_0); /* * Disable doorbell interrupts */ rkt_writeb(dev, MUnit.OIMR, dev->OIMR = 0xff); /* * Force the completion of the mask register write before issuing * the interrupt. */ rkt_readb (dev, MUnit.OIMR); /* * Signal that there is a new synch command */ rkt_writel(dev, InboundDoorbellReg, INBOUNDDOORBELL_0); ok = 0; start = jiffies; /* * Wait up to 30 seconds */ while (time_before(jiffies, start+30*HZ)) { udelay(5); /* Delay 5 microseconds to let Mon960 get info. */ /* * Mon960 will set doorbell0 bit when it has completed the command. */ if (rkt_readl(dev, OutboundDoorbellReg) & OUTBOUNDDOORBELL_0) { /* * Clear the doorbell. */ rkt_writel(dev, OutboundDoorbellReg, OUTBOUNDDOORBELL_0); ok = 1; break; } /* * Yield the processor in case we are slow */ msleep(1); } if (ok != 1) { /* * Restore interrupt mask even though we timed out */ if (dev->new_comm_interface) rkt_writeb(dev, MUnit.OIMR, dev->OIMR = 0xf7); else rkt_writeb(dev, MUnit.OIMR, dev->OIMR = 0xfb); return -ETIMEDOUT; } /* * Pull the synch status from Mailbox 0. */ if (status) *status = rkt_readl(dev, IndexRegs.Mailbox[0]); if (r1) *r1 = rkt_readl(dev, IndexRegs.Mailbox[1]); if (r2) *r2 = rkt_readl(dev, IndexRegs.Mailbox[2]); if (r3) *r3 = rkt_readl(dev, IndexRegs.Mailbox[3]); if (r4) *r4 = rkt_readl(dev, IndexRegs.Mailbox[4]); /* * Clear the synch command doorbell. */ rkt_writel(dev, OutboundDoorbellReg, OUTBOUNDDOORBELL_0); /* * Restore interrupt mask */ if (dev->new_comm_interface) rkt_writeb(dev, MUnit.OIMR, dev->OIMR = 0xf7); else rkt_writeb(dev, MUnit.OIMR, dev->OIMR = 0xfb); return 0; } /** * aac_rkt_interrupt_adapter - interrupt adapter * @dev: Adapter * * Send an interrupt to the i960 and breakpoint it. */ static void aac_rkt_interrupt_adapter(struct aac_dev *dev) { rkt_sync_cmd(dev, BREAKPOINT_REQUEST, 0, 0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL); } /** * aac_rkt_notify_adapter - send an event to the adapter * @dev: Adapter * @event: Event to send * * Notify the i960 that something it probably cares about has * happened. */ static void aac_rkt_notify_adapter(struct aac_dev *dev, u32 event) { switch (event) { case AdapNormCmdQue: rkt_writel(dev, MUnit.IDR,INBOUNDDOORBELL_1); break; case HostNormRespNotFull: rkt_writel(dev, MUnit.IDR,INBOUNDDOORBELL_4); break; case AdapNormRespQue: rkt_writel(dev, MUnit.IDR,INBOUNDDOORBELL_2); break; case HostNormCmdNotFull: rkt_writel(dev, MUnit.IDR,INBOUNDDOORBELL_3); break; case HostShutdown: // rkt_sync_cmd(dev, HOST_CRASHING, 0, 0, 0, 0, 0, 0, // NULL, NULL, NULL, NULL, NULL); break; case FastIo: rkt_writel(dev, MUnit.IDR,INBOUNDDOORBELL_6); break; case AdapPrintfDone: rkt_writel(dev, MUnit.IDR,INBOUNDDOORBELL_5); break; default: BUG(); break; } } /** * aac_rkt_start_adapter - activate adapter * @dev: Adapter * * Start up processing on an i960 based AAC adapter */ static void aac_rkt_start_adapter(struct aac_dev *dev) { struct aac_init *init; init = dev->init; init->HostElapsedSeconds = cpu_to_le32(get_seconds()); // We can only use a 32 bit address here rkt_sync_cmd(dev, INIT_STRUCT_BASE_ADDRESS, (u32)(ulong)dev->init_pa, 0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL); } /** * aac_rkt_check_health * @dev: device to check if healthy * * Will attempt to determine if the specified adapter is alive and * capable of handling requests, returning 0 if alive. */ static int aac_rkt_check_health(struct aac_dev *dev) { u32 status = rkt_readl(dev, MUnit.OMRx[0]); /* * Check to see if the board failed any self tests. */ if (status & SELF_TEST_FAILED) return -1; /* * Check to see if the board panic'd. */ if (status & KERNEL_PANIC) { char * buffer; struct POSTSTATUS { __le32 Post_Command; __le32 Post_Address; } * post; dma_addr_t paddr, baddr; int ret; if ((status & 0xFF000000L) == 0xBC000000L) return (status >> 16) & 0xFF; buffer = pci_alloc_consistent(dev->pdev, 512, &baddr); ret = -2; if (buffer == NULL) return ret; post = pci_alloc_consistent(dev->pdev, sizeof(struct POSTSTATUS), &paddr); if (post == NULL) { pci_free_consistent(dev->pdev, 512, buffer, baddr); return ret; } memset(buffer, 0, 512); post->Post_Command = cpu_to_le32(COMMAND_POST_RESULTS); post->Post_Address = cpu_to_le32(baddr); rkt_writel(dev, MUnit.IMRx[0], paddr); rkt_sync_cmd(dev, COMMAND_POST_RESULTS, baddr, 0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL); pci_free_consistent(dev->pdev, sizeof(struct POSTSTATUS), post, paddr); if ((buffer[0] == '0') && ((buffer[1] == 'x') || (buffer[1] == 'X'))) { ret = (buffer[2] <= '9') ? (buffer[2] - '0') : (buffer[2] - 'A' + 10); ret <<= 4; ret += (buffer[3] <= '9') ? (buffer[3] - '0') : (buffer[3] - 'A' + 10); } pci_free_consistent(dev->pdev, 512, buffer, baddr); return ret; } /* * Wait for the adapter to be up and running. */ if (!(status & KERNEL_UP_AND_RUNNING)) return -3; /* * Everything is OK */ return 0; } /** * aac_rkt_send * @fib: fib to issue * * Will send a fib, returning 0 if successful. */ static int aac_rkt_send(struct fib * fib) { u64 addr = fib->hw_fib_pa; struct aac_dev *dev = fib->dev; volatile void __iomem *device = dev->regs.rkt; u32 Index; dprintk((KERN_DEBUG "%p->aac_rkt_send(%p->%llx)\n", dev, fib, addr)); Index = rkt_readl(dev, MUnit.InboundQueue); if (Index == 0xFFFFFFFFL) Index = rkt_readl(dev, MUnit.InboundQueue); dprintk((KERN_DEBUG "Index = 0x%x\n", Index)); if (Index == 0xFFFFFFFFL) return Index; device += Index; dprintk((KERN_DEBUG "entry = %x %x %u\n", (u32)(addr & 0xffffffff), (u32)(addr >> 32), (u32)le16_to_cpu(fib->hw_fib->header.Size))); writel((u32)(addr & 0xffffffff), device); device += sizeof(u32); writel((u32)(addr >> 32), device); device += sizeof(u32); writel(le16_to_cpu(fib->hw_fib->header.Size), device); rkt_writel(dev, MUnit.InboundQueue, Index); dprintk((KERN_DEBUG "aac_rkt_send - return 0\n")); return 0; } /** * aac_rkt_init - initialize an i960 based AAC card * @dev: device to configure * * Allocate and set up resources for the i960 based AAC variants. The * device_interface in the commregion will be allocated and linked * to the comm region. */ int aac_rkt_init(struct aac_dev *dev) { unsigned long start; unsigned long status; int instance; const char * name; instance = dev->id; name = dev->name; /* * Check to see if the board panic'd while booting. */ /* * Check to see if the board failed any self tests. */ if (rkt_readl(dev, MUnit.OMRx[0]) & SELF_TEST_FAILED) { printk(KERN_ERR "%s%d: adapter self-test failed.\n", dev->name, instance); goto error_iounmap; } /* * Check to see if the monitor panic'd while booting. */ if (rkt_readl(dev, MUnit.OMRx[0]) & MONITOR_PANIC) { printk(KERN_ERR "%s%d: adapter monitor panic.\n", dev->name, instance); goto error_iounmap; } /* * Check to see if the board panic'd while booting. */ if (rkt_readl(dev, MUnit.OMRx[0]) & KERNEL_PANIC) { printk(KERN_ERR "%s%d: adapter kernel panic'd.\n", dev->name, instance); goto error_iounmap; } start = jiffies; /* * Wait for the adapter to be up and running. Wait up to 3 minutes */ while (!(rkt_readl(dev, MUnit.OMRx[0]) & KERNEL_UP_AND_RUNNING)) { if(time_after(jiffies, start+180*HZ)) { status = rkt_readl(dev, MUnit.OMRx[0]); printk(KERN_ERR "%s%d: adapter kernel failed to start, init status = %lx.\n", dev->name, instance, status); goto error_iounmap; } schedule_timeout_uninterruptible(1); } if (request_irq(dev->scsi_host_ptr->irq, aac_rkt_intr, SA_SHIRQ|SA_INTERRUPT, "aacraid", (void *)dev)<0) { printk(KERN_ERR "%s%d: Interrupt unavailable.\n", name, instance); goto error_iounmap; } /* * Fill in the function dispatch table. */ dev->a_ops.adapter_interrupt = aac_rkt_interrupt_adapter; dev->a_ops.adapter_disable_int = aac_rkt_disable_interrupt; dev->a_ops.adapter_notify = aac_rkt_notify_adapter; dev->a_ops.adapter_sync_cmd = rkt_sync_cmd; dev->a_ops.adapter_check_health = aac_rkt_check_health; dev->a_ops.adapter_send = aac_rkt_send; /* * First clear out all interrupts. Then enable the one's that we * can handle. */ rkt_writeb(dev, MUnit.OIMR, 0xff); rkt_writel(dev, MUnit.ODR, 0xffffffff); rkt_writeb(dev, MUnit.OIMR, dev->OIMR = 0xfb); if (aac_init_adapter(dev) == NULL) goto error_irq; if (dev->new_comm_interface) { /* * FIB Setup has already been done, but we can minimize the * damage by at least ensuring the OS never issues more * commands than we can handle. The Rocket adapters currently * can only handle 246 commands and 8 AIFs at the same time, * and in fact do notify us accordingly if we negotiate the * FIB size. The problem that causes us to add this check is * to ensure that we do not overdo it with the adapter when a * hard coded FIB override is being utilized. This special * case warrants this half baked, but convenient, check here. */ if (dev->scsi_host_ptr->can_queue > (246 - AAC_NUM_MGT_FIB)) { dev->init->MaxIoCommands = cpu_to_le32(246); dev->scsi_host_ptr->can_queue = 246 - AAC_NUM_MGT_FIB; } rkt_writeb(dev, MUnit.OIMR, dev->OIMR = 0xf7); } /* * Tell the adapter that all is configured, and it can start * accepting requests */ aac_rkt_start_adapter(dev); return 0; error_irq: rkt_writeb(dev, MUnit.OIMR, dev->OIMR = 0xff); free_irq(dev->scsi_host_ptr->irq, (void *)dev); error_iounmap: return -1; }