/* * Regulator driver for tps65090 power management chip. * * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved. * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, * version 2, as published by the Free Software Foundation. * This program is distributed in the hope it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. * You should have received a copy of the GNU General Public License * along with this program. If not, see */ #include #include #include #include #include #include #include #include #include #include #include #include #define MAX_CTRL_READ_TRIES 5 #define MAX_FET_ENABLE_TRIES 1000 #define CTRL_EN_BIT 0 /* Regulator enable bit, active high */ #define CTRL_WT_BIT 2 /* Regulator wait time 0 bit */ #define CTRL_PG_BIT 4 /* Regulator power good bit, 1=good */ #define CTRL_TO_BIT 7 /* Regulator timeout bit, 1=wait */ #define MAX_OVERCURRENT_WAIT 3 /* Overcurrent wait must be <= this */ /** * struct tps65090_regulator - Per-regulator data for a tps65090 regulator * * @dev: Pointer to our device. * @desc: The struct regulator_desc for the regulator. * @rdev: The struct regulator_dev for the regulator. * @overcurrent_wait_valid: True if overcurrent_wait is valid. * @overcurrent_wait: For FETs, the value to put in the WTFET bitfield. */ struct tps65090_regulator { struct device *dev; struct regulator_desc *desc; struct regulator_dev *rdev; bool overcurrent_wait_valid; int overcurrent_wait; }; static struct regulator_ops tps65090_ext_control_ops = { }; /** * tps65090_reg_set_overcurrent_wait - Setup overcurrent wait * * This will set the overcurrent wait time based on what's in the regulator * info. * * @ri: Overall regulator data * @rdev: Regulator device * * Return: 0 if no error, non-zero if there was an error writing the register. */ static int tps65090_reg_set_overcurrent_wait(struct tps65090_regulator *ri, struct regulator_dev *rdev) { int ret; ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, MAX_OVERCURRENT_WAIT << CTRL_WT_BIT, ri->overcurrent_wait << CTRL_WT_BIT); if (ret) { dev_err(&rdev->dev, "Error updating overcurrent wait %#x\n", rdev->desc->enable_reg); } return ret; } /** * tps65090_try_enable_fet - Try to enable a FET * * @rdev: Regulator device * * Return: 0 if ok, -ENOTRECOVERABLE if the FET power good bit did not get * set, or some other -ve value if another error occurred (e.g. i2c error) */ static int tps65090_try_enable_fet(struct regulator_dev *rdev) { unsigned int control; int ret, i; ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, rdev->desc->enable_mask, rdev->desc->enable_mask); if (ret < 0) { dev_err(&rdev->dev, "Error in updating reg %#x\n", rdev->desc->enable_reg); return ret; } for (i = 0; i < MAX_CTRL_READ_TRIES; i++) { ret = regmap_read(rdev->regmap, rdev->desc->enable_reg, &control); if (ret < 0) return ret; if (!(control & BIT(CTRL_TO_BIT))) break; usleep_range(1000, 1500); } if (!(control & BIT(CTRL_PG_BIT))) return -ENOTRECOVERABLE; return 0; } /** * tps65090_fet_enable - Enable a FET, trying a few times if it fails * * Some versions of the tps65090 have issues when turning on the FETs. * This function goes through several steps to ensure the best chance of the * FET going on. Specifically: * - We'll make sure that we bump the "overcurrent wait" to the maximum, which * increases the chances that we'll turn on properly. * - We'll retry turning the FET on multiple times (turning off in between). * * @rdev: Regulator device * * Return: 0 if ok, non-zero if it fails. */ static int tps65090_fet_enable(struct regulator_dev *rdev) { int ret, tries; /* * Try enabling multiple times until we succeed since sometimes the * first try times out. */ tries = 0; while (true) { ret = tps65090_try_enable_fet(rdev); if (!ret) break; if (ret != -ENOTRECOVERABLE || tries == MAX_FET_ENABLE_TRIES) goto err; /* Try turning the FET off (and then on again) */ ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, rdev->desc->enable_mask, 0); if (ret) goto err; tries++; } if (tries) dev_warn(&rdev->dev, "reg %#x enable ok after %d tries\n", rdev->desc->enable_reg, tries); return 0; err: dev_warn(&rdev->dev, "reg %#x enable failed\n", rdev->desc->enable_reg); WARN_ON(1); return ret; } static struct regulator_ops tps65090_reg_control_ops = { .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, .is_enabled = regulator_is_enabled_regmap, }; static struct regulator_ops tps65090_fet_control_ops = { .enable = tps65090_fet_enable, .disable = regulator_disable_regmap, .is_enabled = regulator_is_enabled_regmap, }; static struct regulator_ops tps65090_ldo_ops = { }; #define tps65090_REG_DESC(_id, _sname, _en_reg, _en_bits, _nvolt, _volt, _ops) \ { \ .name = "TPS65090_RAILS"#_id, \ .supply_name = _sname, \ .id = TPS65090_REGULATOR_##_id, \ .n_voltages = _nvolt, \ .ops = &_ops, \ .fixed_uV = _volt, \ .enable_reg = _en_reg, \ .enable_val = _en_bits, \ .enable_mask = _en_bits, \ .type = REGULATOR_VOLTAGE, \ .owner = THIS_MODULE, \ } #define tps65090_REG_FIXEDV(_id, _sname, en_reg, _en_bits, _volt, _ops) \ tps65090_REG_DESC(_id, _sname, en_reg, _en_bits, 1, _volt, _ops) #define tps65090_REG_SWITCH(_id, _sname, en_reg, _en_bits, _ops) \ tps65090_REG_DESC(_id, _sname, en_reg, _en_bits, 0, 0, _ops) static struct regulator_desc tps65090_regulator_desc[] = { tps65090_REG_FIXEDV(DCDC1, "vsys1", 0x0C, BIT(CTRL_EN_BIT), 5000000, tps65090_reg_control_ops), tps65090_REG_FIXEDV(DCDC2, "vsys2", 0x0D, BIT(CTRL_EN_BIT), 3300000, tps65090_reg_control_ops), tps65090_REG_SWITCH(DCDC3, "vsys3", 0x0E, BIT(CTRL_EN_BIT), tps65090_reg_control_ops), tps65090_REG_SWITCH(FET1, "infet1", 0x0F, BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT), tps65090_fet_control_ops), tps65090_REG_SWITCH(FET2, "infet2", 0x10, BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT), tps65090_fet_control_ops), tps65090_REG_SWITCH(FET3, "infet3", 0x11, BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT), tps65090_fet_control_ops), tps65090_REG_SWITCH(FET4, "infet4", 0x12, BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT), tps65090_fet_control_ops), tps65090_REG_SWITCH(FET5, "infet5", 0x13, BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT), tps65090_fet_control_ops), tps65090_REG_SWITCH(FET6, "infet6", 0x14, BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT), tps65090_fet_control_ops), tps65090_REG_SWITCH(FET7, "infet7", 0x15, BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT), tps65090_fet_control_ops), tps65090_REG_FIXEDV(LDO1, "vsys-l1", 0, 0, 5000000, tps65090_ldo_ops), tps65090_REG_FIXEDV(LDO2, "vsys-l2", 0, 0, 3300000, tps65090_ldo_ops), }; static inline bool is_dcdc(int id) { switch (id) { case TPS65090_REGULATOR_DCDC1: case TPS65090_REGULATOR_DCDC2: case TPS65090_REGULATOR_DCDC3: return true; default: return false; } } static int tps65090_config_ext_control( struct tps65090_regulator *ri, bool enable) { int ret; struct device *parent = ri->dev->parent; unsigned int reg_en_reg = ri->desc->enable_reg; if (enable) ret = tps65090_set_bits(parent, reg_en_reg, 1); else ret = tps65090_clr_bits(parent, reg_en_reg, 1); if (ret < 0) dev_err(ri->dev, "Error in updating reg 0x%x\n", reg_en_reg); return ret; } static int tps65090_regulator_disable_ext_control( struct tps65090_regulator *ri, struct tps65090_regulator_plat_data *tps_pdata) { int ret = 0; struct device *parent = ri->dev->parent; unsigned int reg_en_reg = ri->desc->enable_reg; /* * First enable output for internal control if require. * And then disable external control. */ if (tps_pdata->reg_init_data->constraints.always_on || tps_pdata->reg_init_data->constraints.boot_on) { ret = tps65090_set_bits(parent, reg_en_reg, 0); if (ret < 0) { dev_err(ri->dev, "Error in set reg 0x%x\n", reg_en_reg); return ret; } } return tps65090_config_ext_control(ri, false); } static void tps65090_configure_regulator_config( struct tps65090_regulator_plat_data *tps_pdata, struct regulator_config *config) { if (gpio_is_valid(tps_pdata->gpio)) { int gpio_flag = GPIOF_OUT_INIT_LOW; if (tps_pdata->reg_init_data->constraints.always_on || tps_pdata->reg_init_data->constraints.boot_on) gpio_flag = GPIOF_OUT_INIT_HIGH; config->ena_gpio = tps_pdata->gpio; config->ena_gpio_initialized = true; config->ena_gpio_flags = gpio_flag; } else { config->ena_gpio = -EINVAL; config->ena_gpio_initialized = false; } } #ifdef CONFIG_OF static struct of_regulator_match tps65090_matches[] = { { .name = "dcdc1", }, { .name = "dcdc2", }, { .name = "dcdc3", }, { .name = "fet1", }, { .name = "fet2", }, { .name = "fet3", }, { .name = "fet4", }, { .name = "fet5", }, { .name = "fet6", }, { .name = "fet7", }, { .name = "ldo1", }, { .name = "ldo2", }, }; static struct tps65090_platform_data *tps65090_parse_dt_reg_data( struct platform_device *pdev, struct of_regulator_match **tps65090_reg_matches) { struct tps65090_platform_data *tps65090_pdata; struct device_node *np = pdev->dev.parent->of_node; struct device_node *regulators; int idx = 0, ret; struct tps65090_regulator_plat_data *reg_pdata; tps65090_pdata = devm_kzalloc(&pdev->dev, sizeof(*tps65090_pdata), GFP_KERNEL); if (!tps65090_pdata) return ERR_PTR(-ENOMEM); reg_pdata = devm_kzalloc(&pdev->dev, TPS65090_REGULATOR_MAX * sizeof(*reg_pdata), GFP_KERNEL); if (!reg_pdata) return ERR_PTR(-ENOMEM); regulators = of_get_child_by_name(np, "regulators"); if (!regulators) { dev_err(&pdev->dev, "regulator node not found\n"); return ERR_PTR(-ENODEV); } ret = of_regulator_match(&pdev->dev, regulators, tps65090_matches, ARRAY_SIZE(tps65090_matches)); of_node_put(regulators); if (ret < 0) { dev_err(&pdev->dev, "Error parsing regulator init data: %d\n", ret); return ERR_PTR(ret); } *tps65090_reg_matches = tps65090_matches; for (idx = 0; idx < ARRAY_SIZE(tps65090_matches); idx++) { struct regulator_init_data *ri_data; struct tps65090_regulator_plat_data *rpdata; rpdata = ®_pdata[idx]; ri_data = tps65090_matches[idx].init_data; if (!ri_data || !tps65090_matches[idx].of_node) continue; rpdata->reg_init_data = ri_data; rpdata->enable_ext_control = of_property_read_bool( tps65090_matches[idx].of_node, "ti,enable-ext-control"); if (rpdata->enable_ext_control) rpdata->gpio = of_get_named_gpio(np, "dcdc-ext-control-gpios", 0); if (of_property_read_u32(tps65090_matches[idx].of_node, "ti,overcurrent-wait", &rpdata->overcurrent_wait) == 0) rpdata->overcurrent_wait_valid = true; tps65090_pdata->reg_pdata[idx] = rpdata; } return tps65090_pdata; } #else static inline struct tps65090_platform_data *tps65090_parse_dt_reg_data( struct platform_device *pdev, struct of_regulator_match **tps65090_reg_matches) { *tps65090_reg_matches = NULL; return NULL; } #endif static int tps65090_regulator_probe(struct platform_device *pdev) { struct tps65090 *tps65090_mfd = dev_get_drvdata(pdev->dev.parent); struct tps65090_regulator *ri = NULL; struct regulator_config config = { }; struct regulator_dev *rdev; struct tps65090_regulator_plat_data *tps_pdata; struct tps65090_regulator *pmic; struct tps65090_platform_data *tps65090_pdata; struct of_regulator_match *tps65090_reg_matches = NULL; int num; int ret; dev_dbg(&pdev->dev, "Probing regulator\n"); tps65090_pdata = dev_get_platdata(pdev->dev.parent); if (!tps65090_pdata && tps65090_mfd->dev->of_node) tps65090_pdata = tps65090_parse_dt_reg_data(pdev, &tps65090_reg_matches); if (IS_ERR_OR_NULL(tps65090_pdata)) { dev_err(&pdev->dev, "Platform data missing\n"); return tps65090_pdata ? PTR_ERR(tps65090_pdata) : -EINVAL; } pmic = devm_kzalloc(&pdev->dev, TPS65090_REGULATOR_MAX * sizeof(*pmic), GFP_KERNEL); if (!pmic) return -ENOMEM; for (num = 0; num < TPS65090_REGULATOR_MAX; num++) { tps_pdata = tps65090_pdata->reg_pdata[num]; ri = &pmic[num]; ri->dev = &pdev->dev; ri->desc = &tps65090_regulator_desc[num]; if (tps_pdata) { ri->overcurrent_wait_valid = tps_pdata->overcurrent_wait_valid; ri->overcurrent_wait = tps_pdata->overcurrent_wait; } /* * TPS5090 DCDC support the control from external digital input. * Configure it as per platform data. */ if (tps_pdata && is_dcdc(num) && tps_pdata->reg_init_data) { if (tps_pdata->enable_ext_control) { tps65090_configure_regulator_config( tps_pdata, &config); ri->desc->ops = &tps65090_ext_control_ops; } else { ret = tps65090_regulator_disable_ext_control( ri, tps_pdata); if (ret < 0) { dev_err(&pdev->dev, "failed disable ext control\n"); return ret; } } } config.dev = pdev->dev.parent; config.driver_data = ri; config.regmap = tps65090_mfd->rmap; if (tps_pdata) config.init_data = tps_pdata->reg_init_data; else config.init_data = NULL; if (tps65090_reg_matches) config.of_node = tps65090_reg_matches[num].of_node; else config.of_node = NULL; rdev = devm_regulator_register(&pdev->dev, ri->desc, &config); if (IS_ERR(rdev)) { dev_err(&pdev->dev, "failed to register regulator %s\n", ri->desc->name); return PTR_ERR(rdev); } ri->rdev = rdev; if (ri->overcurrent_wait_valid) { ret = tps65090_reg_set_overcurrent_wait(ri, rdev); if (ret < 0) return ret; } /* Enable external control if it is require */ if (tps_pdata && is_dcdc(num) && tps_pdata->reg_init_data && tps_pdata->enable_ext_control) { ret = tps65090_config_ext_control(ri, true); if (ret < 0) return ret; } } platform_set_drvdata(pdev, pmic); return 0; } static struct platform_driver tps65090_regulator_driver = { .driver = { .name = "tps65090-pmic", }, .probe = tps65090_regulator_probe, }; static int __init tps65090_regulator_init(void) { return platform_driver_register(&tps65090_regulator_driver); } subsys_initcall(tps65090_regulator_init); static void __exit tps65090_regulator_exit(void) { platform_driver_unregister(&tps65090_regulator_driver); } module_exit(tps65090_regulator_exit); MODULE_DESCRIPTION("tps65090 regulator driver"); MODULE_AUTHOR("Venu Byravarasu "); MODULE_LICENSE("GPL v2"); MODULE_ALIAS("platform:tps65090-pmic");