/* * R-Mobile TPU PWM driver * * Copyright (C) 2012 Renesas Solutions Corp. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define TPU_TSTR 0x00 /* Timer start register (shared) */ #define TPU_TCRn 0x00 /* Timer control register */ #define TPU_TCR_CCLR_NONE (0 << 5) #define TPU_TCR_CCLR_TGRA (1 << 5) #define TPU_TCR_CCLR_TGRB (2 << 5) #define TPU_TCR_CCLR_TGRC (5 << 5) #define TPU_TCR_CCLR_TGRD (6 << 5) #define TPU_TCR_CKEG_RISING (0 << 3) #define TPU_TCR_CKEG_FALLING (1 << 3) #define TPU_TCR_CKEG_BOTH (2 << 3) #define TPU_TMDRn 0x04 /* Timer mode register */ #define TPU_TMDR_BFWT (1 << 6) #define TPU_TMDR_BFB (1 << 5) #define TPU_TMDR_BFA (1 << 4) #define TPU_TMDR_MD_NORMAL (0 << 0) #define TPU_TMDR_MD_PWM (2 << 0) #define TPU_TIORn 0x08 /* Timer I/O control register */ #define TPU_TIOR_IOA_0 (0 << 0) #define TPU_TIOR_IOA_0_CLR (1 << 0) #define TPU_TIOR_IOA_0_SET (2 << 0) #define TPU_TIOR_IOA_0_TOGGLE (3 << 0) #define TPU_TIOR_IOA_1 (4 << 0) #define TPU_TIOR_IOA_1_CLR (5 << 0) #define TPU_TIOR_IOA_1_SET (6 << 0) #define TPU_TIOR_IOA_1_TOGGLE (7 << 0) #define TPU_TIERn 0x0c /* Timer interrupt enable register */ #define TPU_TSRn 0x10 /* Timer status register */ #define TPU_TCNTn 0x14 /* Timer counter */ #define TPU_TGRAn 0x18 /* Timer general register A */ #define TPU_TGRBn 0x1c /* Timer general register B */ #define TPU_TGRCn 0x20 /* Timer general register C */ #define TPU_TGRDn 0x24 /* Timer general register D */ #define TPU_CHANNEL_OFFSET 0x10 #define TPU_CHANNEL_SIZE 0x40 enum tpu_pin_state { TPU_PIN_INACTIVE, /* Pin is driven inactive */ TPU_PIN_PWM, /* Pin is driven by PWM */ TPU_PIN_ACTIVE, /* Pin is driven active */ }; struct tpu_device; struct tpu_pwm_device { bool timer_on; /* Whether the timer is running */ struct tpu_device *tpu; unsigned int channel; /* Channel number in the TPU */ enum pwm_polarity polarity; unsigned int prescaler; u16 period; u16 duty; }; struct tpu_device { struct platform_device *pdev; enum pwm_polarity polarities[TPU_CHANNEL_MAX]; struct pwm_chip chip; spinlock_t lock; void __iomem *base; struct clk *clk; }; #define to_tpu_device(c) container_of(c, struct tpu_device, chip) static void tpu_pwm_write(struct tpu_pwm_device *pwm, int reg_nr, u16 value) { void __iomem *base = pwm->tpu->base + TPU_CHANNEL_OFFSET + pwm->channel * TPU_CHANNEL_SIZE; iowrite16(value, base + reg_nr); } static void tpu_pwm_set_pin(struct tpu_pwm_device *pwm, enum tpu_pin_state state) { static const char * const states[] = { "inactive", "PWM", "active" }; dev_dbg(&pwm->tpu->pdev->dev, "%u: configuring pin as %s\n", pwm->channel, states[state]); switch (state) { case TPU_PIN_INACTIVE: tpu_pwm_write(pwm, TPU_TIORn, pwm->polarity == PWM_POLARITY_INVERSED ? TPU_TIOR_IOA_1 : TPU_TIOR_IOA_0); break; case TPU_PIN_PWM: tpu_pwm_write(pwm, TPU_TIORn, pwm->polarity == PWM_POLARITY_INVERSED ? TPU_TIOR_IOA_0_SET : TPU_TIOR_IOA_1_CLR); break; case TPU_PIN_ACTIVE: tpu_pwm_write(pwm, TPU_TIORn, pwm->polarity == PWM_POLARITY_INVERSED ? TPU_TIOR_IOA_0 : TPU_TIOR_IOA_1); break; } } static void tpu_pwm_start_stop(struct tpu_pwm_device *pwm, int start) { unsigned long flags; u16 value; spin_lock_irqsave(&pwm->tpu->lock, flags); value = ioread16(pwm->tpu->base + TPU_TSTR); if (start) value |= 1 << pwm->channel; else value &= ~(1 << pwm->channel); iowrite16(value, pwm->tpu->base + TPU_TSTR); spin_unlock_irqrestore(&pwm->tpu->lock, flags); } static int tpu_pwm_timer_start(struct tpu_pwm_device *pwm) { int ret; if (!pwm->timer_on) { /* Wake up device and enable clock. */ pm_runtime_get_sync(&pwm->tpu->pdev->dev); ret = clk_prepare_enable(pwm->tpu->clk); if (ret) { dev_err(&pwm->tpu->pdev->dev, "cannot enable clock\n"); return ret; } pwm->timer_on = true; } /* * Make sure the channel is stopped, as we need to reconfigure it * completely. First drive the pin to the inactive state to avoid * glitches. */ tpu_pwm_set_pin(pwm, TPU_PIN_INACTIVE); tpu_pwm_start_stop(pwm, false); /* * - Clear TCNT on TGRB match * - Count on rising edge * - Set prescaler * - Output 0 until TGRA, output 1 until TGRB (active low polarity) * - Output 1 until TGRA, output 0 until TGRB (active high polarity * - PWM mode */ tpu_pwm_write(pwm, TPU_TCRn, TPU_TCR_CCLR_TGRB | TPU_TCR_CKEG_RISING | pwm->prescaler); tpu_pwm_write(pwm, TPU_TMDRn, TPU_TMDR_MD_PWM); tpu_pwm_set_pin(pwm, TPU_PIN_PWM); tpu_pwm_write(pwm, TPU_TGRAn, pwm->duty); tpu_pwm_write(pwm, TPU_TGRBn, pwm->period); dev_dbg(&pwm->tpu->pdev->dev, "%u: TGRA 0x%04x TGRB 0x%04x\n", pwm->channel, pwm->duty, pwm->period); /* Start the channel. */ tpu_pwm_start_stop(pwm, true); return 0; } static void tpu_pwm_timer_stop(struct tpu_pwm_device *pwm) { if (!pwm->timer_on) return; /* Disable channel. */ tpu_pwm_start_stop(pwm, false); /* Stop clock and mark device as idle. */ clk_disable_unprepare(pwm->tpu->clk); pm_runtime_put(&pwm->tpu->pdev->dev); pwm->timer_on = false; } /* ----------------------------------------------------------------------------- * PWM API */ static int tpu_pwm_request(struct pwm_chip *chip, struct pwm_device *_pwm) { struct tpu_device *tpu = to_tpu_device(chip); struct tpu_pwm_device *pwm; if (_pwm->hwpwm >= TPU_CHANNEL_MAX) return -EINVAL; pwm = kzalloc(sizeof(*pwm), GFP_KERNEL); if (pwm == NULL) return -ENOMEM; pwm->tpu = tpu; pwm->channel = _pwm->hwpwm; pwm->polarity = tpu->polarities[pwm->channel]; pwm->prescaler = 0; pwm->period = 0; pwm->duty = 0; pwm->timer_on = false; pwm_set_chip_data(_pwm, pwm); return 0; } static void tpu_pwm_free(struct pwm_chip *chip, struct pwm_device *_pwm) { struct tpu_pwm_device *pwm = pwm_get_chip_data(_pwm); tpu_pwm_timer_stop(pwm); kfree(pwm); } static int tpu_pwm_config(struct pwm_chip *chip, struct pwm_device *_pwm, int duty_ns, int period_ns) { static const unsigned int prescalers[] = { 1, 4, 16, 64 }; struct tpu_pwm_device *pwm = pwm_get_chip_data(_pwm); struct tpu_device *tpu = to_tpu_device(chip); unsigned int prescaler; bool duty_only = false; u32 clk_rate; u32 period; u32 duty; int ret; /* * Pick a prescaler to avoid overflowing the counter. * TODO: Pick the highest acceptable prescaler. */ clk_rate = clk_get_rate(tpu->clk); for (prescaler = 0; prescaler < ARRAY_SIZE(prescalers); ++prescaler) { period = clk_rate / prescalers[prescaler] / (NSEC_PER_SEC / period_ns); if (period <= 0xffff) break; } if (prescaler == ARRAY_SIZE(prescalers) || period == 0) { dev_err(&tpu->pdev->dev, "clock rate mismatch\n"); return -ENOTSUPP; } if (duty_ns) { duty = clk_rate / prescalers[prescaler] / (NSEC_PER_SEC / duty_ns); if (duty > period) return -EINVAL; } else { duty = 0; } dev_dbg(&tpu->pdev->dev, "rate %u, prescaler %u, period %u, duty %u\n", clk_rate, prescalers[prescaler], period, duty); if (pwm->prescaler == prescaler && pwm->period == period) duty_only = true; pwm->prescaler = prescaler; pwm->period = period; pwm->duty = duty; /* If the channel is disabled we're done. */ if (!test_bit(PWMF_ENABLED, &_pwm->flags)) return 0; if (duty_only && pwm->timer_on) { /* * If only the duty cycle changed and the timer is already * running, there's no need to reconfigure it completely, Just * modify the duty cycle. */ tpu_pwm_write(pwm, TPU_TGRAn, pwm->duty); dev_dbg(&tpu->pdev->dev, "%u: TGRA 0x%04x\n", pwm->channel, pwm->duty); } else { /* Otherwise perform a full reconfiguration. */ ret = tpu_pwm_timer_start(pwm); if (ret < 0) return ret; } if (duty == 0 || duty == period) { /* * To avoid running the timer when not strictly required, handle * 0% and 100% duty cycles as fixed levels and stop the timer. */ tpu_pwm_set_pin(pwm, duty ? TPU_PIN_ACTIVE : TPU_PIN_INACTIVE); tpu_pwm_timer_stop(pwm); } return 0; } static int tpu_pwm_set_polarity(struct pwm_chip *chip, struct pwm_device *_pwm, enum pwm_polarity polarity) { struct tpu_pwm_device *pwm = pwm_get_chip_data(_pwm); pwm->polarity = polarity; return 0; } static int tpu_pwm_enable(struct pwm_chip *chip, struct pwm_device *_pwm) { struct tpu_pwm_device *pwm = pwm_get_chip_data(_pwm); int ret; ret = tpu_pwm_timer_start(pwm); if (ret < 0) return ret; /* * To avoid running the timer when not strictly required, handle 0% and * 100% duty cycles as fixed levels and stop the timer. */ if (pwm->duty == 0 || pwm->duty == pwm->period) { tpu_pwm_set_pin(pwm, pwm->duty ? TPU_PIN_ACTIVE : TPU_PIN_INACTIVE); tpu_pwm_timer_stop(pwm); } return 0; } static void tpu_pwm_disable(struct pwm_chip *chip, struct pwm_device *_pwm) { struct tpu_pwm_device *pwm = pwm_get_chip_data(_pwm); /* The timer must be running to modify the pin output configuration. */ tpu_pwm_timer_start(pwm); tpu_pwm_set_pin(pwm, TPU_PIN_INACTIVE); tpu_pwm_timer_stop(pwm); } static const struct pwm_ops tpu_pwm_ops = { .request = tpu_pwm_request, .free = tpu_pwm_free, .config = tpu_pwm_config, .set_polarity = tpu_pwm_set_polarity, .enable = tpu_pwm_enable, .disable = tpu_pwm_disable, .owner = THIS_MODULE, }; /* ----------------------------------------------------------------------------- * Probe and remove */ static void tpu_parse_pdata(struct tpu_device *tpu) { struct tpu_pwm_platform_data *pdata = tpu->pdev->dev.platform_data; unsigned int i; for (i = 0; i < ARRAY_SIZE(tpu->polarities); ++i) tpu->polarities[i] = pdata ? pdata->channels[i].polarity : PWM_POLARITY_NORMAL; } static int tpu_probe(struct platform_device *pdev) { struct tpu_device *tpu; struct resource *res; int ret; tpu = devm_kzalloc(&pdev->dev, sizeof(*tpu), GFP_KERNEL); if (tpu == NULL) return -ENOMEM; spin_lock_init(&tpu->lock); tpu->pdev = pdev; /* Initialize device configuration from platform data. */ tpu_parse_pdata(tpu); /* Map memory, get clock and pin control. */ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); tpu->base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(tpu->base)) return PTR_ERR(tpu->base); tpu->clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(tpu->clk)) { dev_err(&pdev->dev, "cannot get clock\n"); return PTR_ERR(tpu->clk); } /* Initialize and register the device. */ platform_set_drvdata(pdev, tpu); tpu->chip.dev = &pdev->dev; tpu->chip.ops = &tpu_pwm_ops; tpu->chip.of_xlate = of_pwm_xlate_with_flags; tpu->chip.of_pwm_n_cells = 3; tpu->chip.base = -1; tpu->chip.npwm = TPU_CHANNEL_MAX; ret = pwmchip_add(&tpu->chip); if (ret < 0) { dev_err(&pdev->dev, "failed to register PWM chip\n"); return ret; } dev_info(&pdev->dev, "TPU PWM %d registered\n", tpu->pdev->id); pm_runtime_enable(&pdev->dev); return 0; } static int tpu_remove(struct platform_device *pdev) { struct tpu_device *tpu = platform_get_drvdata(pdev); int ret; ret = pwmchip_remove(&tpu->chip); if (ret) return ret; pm_runtime_disable(&pdev->dev); return 0; } #ifdef CONFIG_OF static const struct of_device_id tpu_of_table[] = { { .compatible = "renesas,tpu-r8a73a4", }, { .compatible = "renesas,tpu-r8a7740", }, { .compatible = "renesas,tpu-r8a7790", }, { .compatible = "renesas,tpu-sh7372", }, { .compatible = "renesas,tpu", }, { }, }; MODULE_DEVICE_TABLE(of, tpu_of_table); #endif static struct platform_driver tpu_driver = { .probe = tpu_probe, .remove = tpu_remove, .driver = { .name = "renesas-tpu-pwm", .owner = THIS_MODULE, .of_match_table = of_match_ptr(tpu_of_table), } }; module_platform_driver(tpu_driver); MODULE_AUTHOR("Laurent Pinchart "); MODULE_DESCRIPTION("Renesas TPU PWM Driver"); MODULE_LICENSE("GPL v2"); MODULE_ALIAS("platform:renesas-tpu-pwm");