/**************************************************************************** * Driver for Solarflare Solarstorm network controllers and boards * Copyright 2007-2009 Solarflare Communications Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License version 2 as published * by the Free Software Foundation, incorporated herein by reference. */ #include #include #include #include #include "efx.h" #include "mdio_10g.h" #include "nic.h" #include "phy.h" #include "workarounds.h" /* We expect these MMDs to be in the package. */ #define TENXPRESS_REQUIRED_DEVS (MDIO_DEVS_PMAPMD | \ MDIO_DEVS_PCS | \ MDIO_DEVS_PHYXS | \ MDIO_DEVS_AN) #define SFX7101_LOOPBACKS ((1 << LOOPBACK_PHYXS) | \ (1 << LOOPBACK_PCS) | \ (1 << LOOPBACK_PMAPMD) | \ (1 << LOOPBACK_PHYXS_WS)) /* We complain if we fail to see the link partner as 10G capable this many * times in a row (must be > 1 as sampling the autoneg. registers is racy) */ #define MAX_BAD_LP_TRIES (5) /* Extended control register */ #define PMA_PMD_XCONTROL_REG 49152 #define PMA_PMD_EXT_GMII_EN_LBN 1 #define PMA_PMD_EXT_GMII_EN_WIDTH 1 #define PMA_PMD_EXT_CLK_OUT_LBN 2 #define PMA_PMD_EXT_CLK_OUT_WIDTH 1 #define PMA_PMD_LNPGA_POWERDOWN_LBN 8 #define PMA_PMD_LNPGA_POWERDOWN_WIDTH 1 #define PMA_PMD_EXT_CLK312_WIDTH 1 #define PMA_PMD_EXT_LPOWER_LBN 12 #define PMA_PMD_EXT_LPOWER_WIDTH 1 #define PMA_PMD_EXT_ROBUST_LBN 14 #define PMA_PMD_EXT_ROBUST_WIDTH 1 #define PMA_PMD_EXT_SSR_LBN 15 #define PMA_PMD_EXT_SSR_WIDTH 1 /* extended status register */ #define PMA_PMD_XSTATUS_REG 49153 #define PMA_PMD_XSTAT_MDIX_LBN 14 #define PMA_PMD_XSTAT_FLP_LBN (12) /* LED control register */ #define PMA_PMD_LED_CTRL_REG 49159 #define PMA_PMA_LED_ACTIVITY_LBN (3) /* LED function override register */ #define PMA_PMD_LED_OVERR_REG 49161 /* Bit positions for different LEDs (there are more but not wired on SFE4001)*/ #define PMA_PMD_LED_LINK_LBN (0) #define PMA_PMD_LED_SPEED_LBN (2) #define PMA_PMD_LED_TX_LBN (4) #define PMA_PMD_LED_RX_LBN (6) /* Override settings */ #define PMA_PMD_LED_AUTO (0) /* H/W control */ #define PMA_PMD_LED_ON (1) #define PMA_PMD_LED_OFF (2) #define PMA_PMD_LED_FLASH (3) #define PMA_PMD_LED_MASK 3 /* All LEDs under hardware control */ /* Green and Amber under hardware control, Red off */ #define SFX7101_PMA_PMD_LED_DEFAULT (PMA_PMD_LED_OFF << PMA_PMD_LED_RX_LBN) #define PMA_PMD_SPEED_ENABLE_REG 49192 #define PMA_PMD_100TX_ADV_LBN 1 #define PMA_PMD_100TX_ADV_WIDTH 1 #define PMA_PMD_1000T_ADV_LBN 2 #define PMA_PMD_1000T_ADV_WIDTH 1 #define PMA_PMD_10000T_ADV_LBN 3 #define PMA_PMD_10000T_ADV_WIDTH 1 #define PMA_PMD_SPEED_LBN 4 #define PMA_PMD_SPEED_WIDTH 4 /* Misc register defines */ #define PCS_CLOCK_CTRL_REG 55297 #define PLL312_RST_N_LBN 2 #define PCS_SOFT_RST2_REG 55302 #define SERDES_RST_N_LBN 13 #define XGXS_RST_N_LBN 12 #define PCS_TEST_SELECT_REG 55303 /* PRM 10.5.8 */ #define CLK312_EN_LBN 3 /* PHYXS registers */ #define PHYXS_XCONTROL_REG 49152 #define PHYXS_RESET_LBN 15 #define PHYXS_RESET_WIDTH 1 #define PHYXS_TEST1 (49162) #define LOOPBACK_NEAR_LBN (8) #define LOOPBACK_NEAR_WIDTH (1) /* Boot status register */ #define PCS_BOOT_STATUS_REG 53248 #define PCS_BOOT_FATAL_ERROR_LBN 0 #define PCS_BOOT_PROGRESS_LBN 1 #define PCS_BOOT_PROGRESS_WIDTH 2 #define PCS_BOOT_PROGRESS_INIT 0 #define PCS_BOOT_PROGRESS_WAIT_MDIO 1 #define PCS_BOOT_PROGRESS_CHECKSUM 2 #define PCS_BOOT_PROGRESS_JUMP 3 #define PCS_BOOT_DOWNLOAD_WAIT_LBN 3 #define PCS_BOOT_CODE_STARTED_LBN 4 /* 100M/1G PHY registers */ #define GPHY_XCONTROL_REG 49152 #define GPHY_ISOLATE_LBN 10 #define GPHY_ISOLATE_WIDTH 1 #define GPHY_DUPLEX_LBN 8 #define GPHY_DUPLEX_WIDTH 1 #define GPHY_LOOPBACK_NEAR_LBN 14 #define GPHY_LOOPBACK_NEAR_WIDTH 1 #define C22EXT_STATUS_REG 49153 #define C22EXT_STATUS_LINK_LBN 2 #define C22EXT_STATUS_LINK_WIDTH 1 #define C22EXT_MSTSLV_CTRL 49161 #define C22EXT_MSTSLV_CTRL_ADV_1000_HD_LBN 8 #define C22EXT_MSTSLV_CTRL_ADV_1000_FD_LBN 9 #define C22EXT_MSTSLV_STATUS 49162 #define C22EXT_MSTSLV_STATUS_LP_1000_HD_LBN 10 #define C22EXT_MSTSLV_STATUS_LP_1000_FD_LBN 11 /* Time to wait between powering down the LNPGA and turning off the power * rails */ #define LNPGA_PDOWN_WAIT (HZ / 5) struct tenxpress_phy_data { enum efx_loopback_mode loopback_mode; enum efx_phy_mode phy_mode; int bad_lp_tries; }; static int tenxpress_init(struct efx_nic *efx) { /* Enable 312.5 MHz clock */ efx_mdio_write(efx, MDIO_MMD_PCS, PCS_TEST_SELECT_REG, 1 << CLK312_EN_LBN); /* Set the LEDs up as: Green = Link, Amber = Link/Act, Red = Off */ efx_mdio_set_flag(efx, MDIO_MMD_PMAPMD, PMA_PMD_LED_CTRL_REG, 1 << PMA_PMA_LED_ACTIVITY_LBN, true); efx_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_LED_OVERR_REG, SFX7101_PMA_PMD_LED_DEFAULT); return 0; } static int tenxpress_phy_probe(struct efx_nic *efx) { struct tenxpress_phy_data *phy_data; /* Allocate phy private storage */ phy_data = kzalloc(sizeof(*phy_data), GFP_KERNEL); if (!phy_data) return -ENOMEM; efx->phy_data = phy_data; phy_data->phy_mode = efx->phy_mode; efx->mdio.mmds = TENXPRESS_REQUIRED_DEVS; efx->mdio.mode_support = MDIO_SUPPORTS_C45; efx->loopback_modes = SFX7101_LOOPBACKS | FALCON_XMAC_LOOPBACKS; efx->link_advertising = (ADVERTISED_TP | ADVERTISED_Autoneg | ADVERTISED_10000baseT_Full); return 0; } static int tenxpress_phy_init(struct efx_nic *efx) { int rc; falcon_board(efx)->type->init_phy(efx); if (!(efx->phy_mode & PHY_MODE_SPECIAL)) { rc = efx_mdio_wait_reset_mmds(efx, TENXPRESS_REQUIRED_DEVS); if (rc < 0) return rc; rc = efx_mdio_check_mmds(efx, TENXPRESS_REQUIRED_DEVS); if (rc < 0) return rc; } rc = tenxpress_init(efx); if (rc < 0) return rc; /* Reinitialise flow control settings */ efx_link_set_wanted_fc(efx, efx->wanted_fc); efx_mdio_an_reconfigure(efx); schedule_timeout_uninterruptible(HZ / 5); /* 200ms */ /* Let XGXS and SerDes out of reset */ falcon_reset_xaui(efx); return 0; } /* Perform a "special software reset" on the PHY. The caller is * responsible for saving and restoring the PHY hardware registers * properly, and masking/unmasking LASI */ static int tenxpress_special_reset(struct efx_nic *efx) { int rc, reg; /* The XGMAC clock is driven from the SFX7101 312MHz clock, so * a special software reset can glitch the XGMAC sufficiently for stats * requests to fail. */ falcon_stop_nic_stats(efx); /* Initiate reset */ reg = efx_mdio_read(efx, MDIO_MMD_PMAPMD, PMA_PMD_XCONTROL_REG); reg |= (1 << PMA_PMD_EXT_SSR_LBN); efx_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_XCONTROL_REG, reg); mdelay(200); /* Wait for the blocks to come out of reset */ rc = efx_mdio_wait_reset_mmds(efx, TENXPRESS_REQUIRED_DEVS); if (rc < 0) goto out; /* Try and reconfigure the device */ rc = tenxpress_init(efx); if (rc < 0) goto out; /* Wait for the XGXS state machine to churn */ mdelay(10); out: falcon_start_nic_stats(efx); return rc; } static void sfx7101_check_bad_lp(struct efx_nic *efx, bool link_ok) { struct tenxpress_phy_data *pd = efx->phy_data; bool bad_lp; int reg; if (link_ok) { bad_lp = false; } else { /* Check that AN has started but not completed. */ reg = efx_mdio_read(efx, MDIO_MMD_AN, MDIO_STAT1); if (!(reg & MDIO_AN_STAT1_LPABLE)) return; /* LP status is unknown */ bad_lp = !(reg & MDIO_AN_STAT1_COMPLETE); if (bad_lp) pd->bad_lp_tries++; } /* Nothing to do if all is well and was previously so. */ if (!pd->bad_lp_tries) return; /* Use the RX (red) LED as an error indicator once we've seen AN * failure several times in a row, and also log a message. */ if (!bad_lp || pd->bad_lp_tries == MAX_BAD_LP_TRIES) { reg = efx_mdio_read(efx, MDIO_MMD_PMAPMD, PMA_PMD_LED_OVERR_REG); reg &= ~(PMA_PMD_LED_MASK << PMA_PMD_LED_RX_LBN); if (!bad_lp) { reg |= PMA_PMD_LED_OFF << PMA_PMD_LED_RX_LBN; } else { reg |= PMA_PMD_LED_FLASH << PMA_PMD_LED_RX_LBN; netif_err(efx, link, efx->net_dev, "appears to be plugged into a port" " that is not 10GBASE-T capable. The PHY" " supports 10GBASE-T ONLY, so no link can" " be established\n"); } efx_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_LED_OVERR_REG, reg); pd->bad_lp_tries = bad_lp; } } static bool sfx7101_link_ok(struct efx_nic *efx) { return efx_mdio_links_ok(efx, MDIO_DEVS_PMAPMD | MDIO_DEVS_PCS | MDIO_DEVS_PHYXS); } static void tenxpress_ext_loopback(struct efx_nic *efx) { efx_mdio_set_flag(efx, MDIO_MMD_PHYXS, PHYXS_TEST1, 1 << LOOPBACK_NEAR_LBN, efx->loopback_mode == LOOPBACK_PHYXS); } static void tenxpress_low_power(struct efx_nic *efx) { efx_mdio_set_mmds_lpower( efx, !!(efx->phy_mode & PHY_MODE_LOW_POWER), TENXPRESS_REQUIRED_DEVS); } static int tenxpress_phy_reconfigure(struct efx_nic *efx) { struct tenxpress_phy_data *phy_data = efx->phy_data; bool phy_mode_change, loop_reset; if (efx->phy_mode & (PHY_MODE_OFF | PHY_MODE_SPECIAL)) { phy_data->phy_mode = efx->phy_mode; return 0; } phy_mode_change = (efx->phy_mode == PHY_MODE_NORMAL && phy_data->phy_mode != PHY_MODE_NORMAL); loop_reset = (LOOPBACK_OUT_OF(phy_data, efx, LOOPBACKS_EXTERNAL(efx)) || LOOPBACK_CHANGED(phy_data, efx, 1 << LOOPBACK_GPHY)); if (loop_reset || phy_mode_change) { tenxpress_special_reset(efx); falcon_reset_xaui(efx); } tenxpress_low_power(efx); efx_mdio_transmit_disable(efx); efx_mdio_phy_reconfigure(efx); tenxpress_ext_loopback(efx); efx_mdio_an_reconfigure(efx); phy_data->loopback_mode = efx->loopback_mode; phy_data->phy_mode = efx->phy_mode; return 0; } static void tenxpress_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd); /* Poll for link state changes */ static bool tenxpress_phy_poll(struct efx_nic *efx) { struct efx_link_state old_state = efx->link_state; efx->link_state.up = sfx7101_link_ok(efx); efx->link_state.speed = 10000; efx->link_state.fd = true; efx->link_state.fc = efx_mdio_get_pause(efx); sfx7101_check_bad_lp(efx, efx->link_state.up); return !efx_link_state_equal(&efx->link_state, &old_state); } static void sfx7101_phy_fini(struct efx_nic *efx) { int reg; /* Power down the LNPGA */ reg = (1 << PMA_PMD_LNPGA_POWERDOWN_LBN); efx_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_XCONTROL_REG, reg); /* Waiting here ensures that the board fini, which can turn * off the power to the PHY, won't get run until the LNPGA * powerdown has been given long enough to complete. */ schedule_timeout_uninterruptible(LNPGA_PDOWN_WAIT); /* 200 ms */ } static void tenxpress_phy_remove(struct efx_nic *efx) { kfree(efx->phy_data); efx->phy_data = NULL; } /* Override the RX, TX and link LEDs */ void tenxpress_set_id_led(struct efx_nic *efx, enum efx_led_mode mode) { int reg; switch (mode) { case EFX_LED_OFF: reg = (PMA_PMD_LED_OFF << PMA_PMD_LED_TX_LBN) | (PMA_PMD_LED_OFF << PMA_PMD_LED_RX_LBN) | (PMA_PMD_LED_OFF << PMA_PMD_LED_LINK_LBN); break; case EFX_LED_ON: reg = (PMA_PMD_LED_ON << PMA_PMD_LED_TX_LBN) | (PMA_PMD_LED_ON << PMA_PMD_LED_RX_LBN) | (PMA_PMD_LED_ON << PMA_PMD_LED_LINK_LBN); break; default: reg = SFX7101_PMA_PMD_LED_DEFAULT; break; } efx_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_LED_OVERR_REG, reg); } static const char *const sfx7101_test_names[] = { "bist" }; static const char *sfx7101_test_name(struct efx_nic *efx, unsigned int index) { if (index < ARRAY_SIZE(sfx7101_test_names)) return sfx7101_test_names[index]; return NULL; } static int sfx7101_run_tests(struct efx_nic *efx, int *results, unsigned flags) { int rc; if (!(flags & ETH_TEST_FL_OFFLINE)) return 0; /* BIST is automatically run after a special software reset */ rc = tenxpress_special_reset(efx); results[0] = rc ? -1 : 1; efx_mdio_an_reconfigure(efx); return rc; } static void tenxpress_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd) { u32 adv = 0, lpa = 0; int reg; reg = efx_mdio_read(efx, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL); if (reg & MDIO_AN_10GBT_CTRL_ADV10G) adv |= ADVERTISED_10000baseT_Full; reg = efx_mdio_read(efx, MDIO_MMD_AN, MDIO_AN_10GBT_STAT); if (reg & MDIO_AN_10GBT_STAT_LP10G) lpa |= ADVERTISED_10000baseT_Full; mdio45_ethtool_gset_npage(&efx->mdio, ecmd, adv, lpa); /* In loopback, the PHY automatically brings up the correct interface, * but doesn't advertise the correct speed. So override it */ if (LOOPBACK_EXTERNAL(efx)) ecmd->speed = SPEED_10000; } static int tenxpress_set_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd) { if (!ecmd->autoneg) return -EINVAL; return efx_mdio_set_settings(efx, ecmd); } static void sfx7101_set_npage_adv(struct efx_nic *efx, u32 advertising) { efx_mdio_set_flag(efx, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL, MDIO_AN_10GBT_CTRL_ADV10G, advertising & ADVERTISED_10000baseT_Full); } struct efx_phy_operations falcon_sfx7101_phy_ops = { .probe = tenxpress_phy_probe, .init = tenxpress_phy_init, .reconfigure = tenxpress_phy_reconfigure, .poll = tenxpress_phy_poll, .fini = sfx7101_phy_fini, .remove = tenxpress_phy_remove, .get_settings = tenxpress_get_settings, .set_settings = tenxpress_set_settings, .set_npage_adv = sfx7101_set_npage_adv, .test_alive = efx_mdio_test_alive, .test_name = sfx7101_test_name, .run_tests = sfx7101_run_tests, };