/* cops.c: LocalTalk driver for Linux. * * Authors: * - Jay Schulist * * With more than a little help from; * - Alan Cox * * Derived from: * - skeleton.c: A network driver outline for linux. * Written 1993-94 by Donald Becker. * - ltpc.c: A driver for the LocalTalk PC card. * Written by Bradford W. Johnson. * * Copyright 1993 United States Government as represented by the * Director, National Security Agency. * * This software may be used and distributed according to the terms * of the GNU General Public License, incorporated herein by reference. * * Changes: * 19970608 Alan Cox Allowed dual card type support * Can set board type in insmod * Hooks for cops_setup routine * (not yet implemented). * 19971101 Jay Schulist Fixes for multiple lt* devices. * 19980607 Steven Hirsch Fixed the badly broken support * for Tangent type cards. Only * tested on Daystar LT200. Some * cleanup of formatting and program * logic. Added emacs 'local-vars' * setup for Jay's brace style. * 20000211 Alan Cox Cleaned up for softnet */ static const char *version = "cops.c:v0.04 6/7/98 Jay Schulist \n"; /* * Sources: * COPS Localtalk SDK. This provides almost all of the information * needed. */ /* * insmod/modprobe configurable stuff. * - IO Port, choose one your card supports or 0 if you dare. * - IRQ, also choose one your card supports or nothing and let * the driver figure it out. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* For udelay() */ #include #include #include #include #include #include #include #include "cops.h" /* Our Stuff */ #include "cops_ltdrv.h" /* Firmware code for Tangent type cards. */ #include "cops_ffdrv.h" /* Firmware code for Dayna type cards. */ /* * The name of the card. Is used for messages and in the requests for * io regions, irqs and dma channels */ static const char *cardname = "cops"; #ifdef CONFIG_COPS_DAYNA static int board_type = DAYNA; /* Module exported */ #else static int board_type = TANGENT; #endif static int io = 0x240; /* Default IO for Dayna */ static int irq = 5; /* Default IRQ */ /* * COPS Autoprobe information. * Right now if port address is right but IRQ is not 5 this will * return a 5 no matter what since we will still get a status response. * Need one more additional check to narrow down after we have gotten * the ioaddr. But since only other possible IRQs is 3 and 4 so no real * hurry on this. I *STRONGLY* recommend using IRQ 5 for your card with * this driver. * * This driver has 2 modes and they are: Dayna mode and Tangent mode. * Each mode corresponds with the type of card. It has been found * that there are 2 main types of cards and all other cards are * the same and just have different names or only have minor differences * such as more IO ports. As this driver is tested it will * become more clear on exactly what cards are supported. The driver * defaults to using Dayna mode. To change the drivers mode, simply * select Dayna or Tangent mode when configuring the kernel. * * This driver should support: * TANGENT driver mode: * Tangent ATB-II, Novell NL-1000, Daystar Digital LT-200, * COPS LT-1 * DAYNA driver mode: * Dayna DL2000/DaynaTalk PC (Half Length), COPS LT-95, * Farallon PhoneNET PC III, Farallon PhoneNET PC II * Other cards possibly supported mode unknown though: * Dayna DL2000 (Full length), COPS LT/M (Micro-Channel) * * Cards NOT supported by this driver but supported by the ltpc.c * driver written by Bradford W. Johnson * Farallon PhoneNET PC * Original Apple LocalTalk PC card * * N.B. * * The Daystar Digital LT200 boards do not support interrupt-driven * IO. You must specify 'irq=0xff' as a module parameter to invoke * polled mode. I also believe that the port probing logic is quite * dangerous at best and certainly hopeless for a polled card. Best to * specify both. - Steve H. * */ /* * Zero terminated list of IO ports to probe. */ static unsigned int ports[] = { 0x240, 0x340, 0x200, 0x210, 0x220, 0x230, 0x260, 0x2A0, 0x300, 0x310, 0x320, 0x330, 0x350, 0x360, 0 }; /* * Zero terminated list of IRQ ports to probe. */ static int cops_irqlist[] = { 5, 4, 3, 0 }; static struct timer_list cops_timer; /* use 0 for production, 1 for verification, 2 for debug, 3 for verbose debug */ #ifndef COPS_DEBUG #define COPS_DEBUG 1 #endif static unsigned int cops_debug = COPS_DEBUG; /* The number of low I/O ports used by the card. */ #define COPS_IO_EXTENT 8 /* Information that needs to be kept for each board. */ struct cops_local { int board; /* Holds what board type is. */ int nodeid; /* Set to 1 once have nodeid. */ unsigned char node_acquire; /* Node ID when acquired. */ struct atalk_addr node_addr; /* Full node address */ spinlock_t lock; /* RX/TX lock */ }; /* Index to functions, as function prototypes. */ static int cops_probe1 (struct net_device *dev, int ioaddr); static int cops_irq (int ioaddr, int board); static int cops_open (struct net_device *dev); static int cops_jumpstart (struct net_device *dev); static void cops_reset (struct net_device *dev, int sleep); static void cops_load (struct net_device *dev); static int cops_nodeid (struct net_device *dev, int nodeid); static irqreturn_t cops_interrupt (int irq, void *dev_id); static void cops_poll (unsigned long ltdev); static void cops_timeout(struct net_device *dev); static void cops_rx (struct net_device *dev); static netdev_tx_t cops_send_packet (struct sk_buff *skb, struct net_device *dev); static void set_multicast_list (struct net_device *dev); static int cops_ioctl (struct net_device *dev, struct ifreq *rq, int cmd); static int cops_close (struct net_device *dev); static void cleanup_card(struct net_device *dev) { if (dev->irq) free_irq(dev->irq, dev); release_region(dev->base_addr, COPS_IO_EXTENT); } /* * Check for a network adaptor of this type, and return '0' iff one exists. * If dev->base_addr == 0, probe all likely locations. * If dev->base_addr in [1..0x1ff], always return failure. * otherwise go with what we pass in. */ struct net_device * __init cops_probe(int unit) { struct net_device *dev; unsigned *port; int base_addr; int err = 0; dev = alloc_ltalkdev(sizeof(struct cops_local)); if (!dev) return ERR_PTR(-ENOMEM); if (unit >= 0) { sprintf(dev->name, "lt%d", unit); netdev_boot_setup_check(dev); irq = dev->irq; base_addr = dev->base_addr; } else { base_addr = dev->base_addr = io; } if (base_addr > 0x1ff) { /* Check a single specified location. */ err = cops_probe1(dev, base_addr); } else if (base_addr != 0) { /* Don't probe at all. */ err = -ENXIO; } else { /* FIXME Does this really work for cards which generate irq? * It's definitely N.G. for polled Tangent. sh * Dayna cards don't autoprobe well at all, but if your card is * at IRQ 5 & IO 0x240 we find it every time. ;) JS */ for (port = ports; *port && cops_probe1(dev, *port) < 0; port++) ; if (!*port) err = -ENODEV; } if (err) goto out; err = register_netdev(dev); if (err) goto out1; return dev; out1: cleanup_card(dev); out: free_netdev(dev); return ERR_PTR(err); } static const struct net_device_ops cops_netdev_ops = { .ndo_open = cops_open, .ndo_stop = cops_close, .ndo_start_xmit = cops_send_packet, .ndo_tx_timeout = cops_timeout, .ndo_do_ioctl = cops_ioctl, .ndo_set_multicast_list = set_multicast_list, }; /* * This is the real probe routine. Linux has a history of friendly device * probes on the ISA bus. A good device probes avoids doing writes, and * verifies that the correct device exists and functions. */ static int __init cops_probe1(struct net_device *dev, int ioaddr) { struct cops_local *lp; static unsigned version_printed; int board = board_type; int retval; if(cops_debug && version_printed++ == 0) printk("%s", version); /* Grab the region so no one else tries to probe our ioports. */ if (!request_region(ioaddr, COPS_IO_EXTENT, dev->name)) return -EBUSY; /* * Since this board has jumpered interrupts, allocate the interrupt * vector now. There is no point in waiting since no other device * can use the interrupt, and this marks the irq as busy. Jumpered * interrupts are typically not reported by the boards, and we must * used AutoIRQ to find them. */ dev->irq = irq; switch (dev->irq) { case 0: /* COPS AutoIRQ routine */ dev->irq = cops_irq(ioaddr, board); if (dev->irq) break; /* No IRQ found on this port, fallthrough */ case 1: retval = -EINVAL; goto err_out; /* Fixup for users that don't know that IRQ 2 is really * IRQ 9, or don't know which one to set. */ case 2: dev->irq = 9; break; /* Polled operation requested. Although irq of zero passed as * a parameter tells the init routines to probe, we'll * overload it to denote polled operation at runtime. */ case 0xff: dev->irq = 0; break; default: break; } /* Reserve any actual interrupt. */ if (dev->irq) { retval = request_irq(dev->irq, cops_interrupt, 0, dev->name, dev); if (retval) goto err_out; } dev->base_addr = ioaddr; lp = netdev_priv(dev); spin_lock_init(&lp->lock); /* Copy local board variable to lp struct. */ lp->board = board; dev->netdev_ops = &cops_netdev_ops; dev->watchdog_timeo = HZ * 2; /* Tell the user where the card is and what mode we're in. */ if(board==DAYNA) printk("%s: %s at %#3x, using IRQ %d, in Dayna mode.\n", dev->name, cardname, ioaddr, dev->irq); if(board==TANGENT) { if(dev->irq) printk("%s: %s at %#3x, IRQ %d, in Tangent mode\n", dev->name, cardname, ioaddr, dev->irq); else printk("%s: %s at %#3x, using polled IO, in Tangent mode.\n", dev->name, cardname, ioaddr); } return 0; err_out: release_region(ioaddr, COPS_IO_EXTENT); return retval; } static int __init cops_irq (int ioaddr, int board) { /* * This does not use the IRQ to determine where the IRQ is. We just * assume that when we get a correct status response that it's the IRQ. * This really just verifies the IO port but since we only have access * to such a small number of IRQs (5, 4, 3) this is not bad. * This will probably not work for more than one card. */ int irqaddr=0; int i, x, status; if(board==DAYNA) { outb(0, ioaddr+DAYNA_RESET); inb(ioaddr+DAYNA_RESET); mdelay(333); } if(board==TANGENT) { inb(ioaddr); outb(0, ioaddr); outb(0, ioaddr+TANG_RESET); } for(i=0; cops_irqlist[i] !=0; i++) { irqaddr = cops_irqlist[i]; for(x = 0xFFFF; x>0; x --) /* wait for response */ { if(board==DAYNA) { status = (inb(ioaddr+DAYNA_CARD_STATUS)&3); if(status == 1) return irqaddr; } if(board==TANGENT) { if((inb(ioaddr+TANG_CARD_STATUS)& TANG_TX_READY) !=0) return irqaddr; } } } return 0; /* no IRQ found */ } /* * Open/initialize the board. This is called (in the current kernel) * sometime after booting when the 'ifconfig' program is run. */ static int cops_open(struct net_device *dev) { struct cops_local *lp = netdev_priv(dev); if(dev->irq==0) { /* * I don't know if the Dayna-style boards support polled * operation. For now, only allow it for Tangent. */ if(lp->board==TANGENT) /* Poll 20 times per second */ { init_timer(&cops_timer); cops_timer.function = cops_poll; cops_timer.data = (unsigned long)dev; cops_timer.expires = jiffies + HZ/20; add_timer(&cops_timer); } else { printk(KERN_WARNING "%s: No irq line set\n", dev->name); return -EAGAIN; } } cops_jumpstart(dev); /* Start the card up. */ netif_start_queue(dev); return 0; } /* * This allows for a dynamic start/restart of the entire card. */ static int cops_jumpstart(struct net_device *dev) { struct cops_local *lp = netdev_priv(dev); /* * Once the card has the firmware loaded and has acquired * the nodeid, if it is reset it will lose it all. */ cops_reset(dev,1); /* Need to reset card before load firmware. */ cops_load(dev); /* Load the firmware. */ /* * If atalkd already gave us a nodeid we will use that * one again, else we wait for atalkd to give us a nodeid * in cops_ioctl. This may cause a problem if someone steals * our nodeid while we are resetting. */ if(lp->nodeid == 1) cops_nodeid(dev,lp->node_acquire); return 0; } static void tangent_wait_reset(int ioaddr) { int timeout=0; while(timeout++ < 5 && (inb(ioaddr+TANG_CARD_STATUS)&TANG_TX_READY)==0) mdelay(1); /* Wait 1 second */ } /* * Reset the LocalTalk board. */ static void cops_reset(struct net_device *dev, int sleep) { struct cops_local *lp = netdev_priv(dev); int ioaddr=dev->base_addr; if(lp->board==TANGENT) { inb(ioaddr); /* Clear request latch. */ outb(0,ioaddr); /* Clear the TANG_TX_READY flop. */ outb(0, ioaddr+TANG_RESET); /* Reset the adapter. */ tangent_wait_reset(ioaddr); outb(0, ioaddr+TANG_CLEAR_INT); } if(lp->board==DAYNA) { outb(0, ioaddr+DAYNA_RESET); /* Assert the reset port */ inb(ioaddr+DAYNA_RESET); /* Clear the reset */ if (sleep) msleep(333); else mdelay(333); } netif_wake_queue(dev); } static void cops_load (struct net_device *dev) { struct ifreq ifr; struct ltfirmware *ltf= (struct ltfirmware *)&ifr.ifr_ifru; struct cops_local *lp = netdev_priv(dev); int ioaddr=dev->base_addr; int length, i = 0; strcpy(ifr.ifr_name,"lt0"); /* Get card's firmware code and do some checks on it. */ #ifdef CONFIG_COPS_DAYNA if(lp->board==DAYNA) { ltf->length=sizeof(ffdrv_code); ltf->data=ffdrv_code; } else #endif #ifdef CONFIG_COPS_TANGENT if(lp->board==TANGENT) { ltf->length=sizeof(ltdrv_code); ltf->data=ltdrv_code; } else #endif { printk(KERN_INFO "%s; unsupported board type.\n", dev->name); return; } /* Check to make sure firmware is correct length. */ if(lp->board==DAYNA && ltf->length!=5983) { printk(KERN_WARNING "%s: Firmware is not length of FFDRV.BIN.\n", dev->name); return; } if(lp->board==TANGENT && ltf->length!=2501) { printk(KERN_WARNING "%s: Firmware is not length of DRVCODE.BIN.\n", dev->name); return; } if(lp->board==DAYNA) { /* * We must wait for a status response * with the DAYNA board. */ while(++i<65536) { if((inb(ioaddr+DAYNA_CARD_STATUS)&3)==1) break; } if(i==65536) return; } /* * Upload the firmware and kick. Byte-by-byte works nicely here. */ i=0; length = ltf->length; while(length--) { outb(ltf->data[i], ioaddr); i++; } if(cops_debug > 1) printk("%s: Uploaded firmware - %d bytes of %d bytes.\n", dev->name, i, ltf->length); if(lp->board==DAYNA) /* Tell Dayna to run the firmware code. */ outb(1, ioaddr+DAYNA_INT_CARD); else /* Tell Tang to run the firmware code. */ inb(ioaddr); if(lp->board==TANGENT) { tangent_wait_reset(ioaddr); inb(ioaddr); /* Clear initial ready signal. */ } } /* * Get the LocalTalk Nodeid from the card. We can suggest * any nodeid 1-254. The card will try and get that exact * address else we can specify 0 as the nodeid and the card * will autoprobe for a nodeid. */ static int cops_nodeid (struct net_device *dev, int nodeid) { struct cops_local *lp = netdev_priv(dev); int ioaddr = dev->base_addr; if(lp->board == DAYNA) { /* Empty any pending adapter responses. */ while((inb(ioaddr+DAYNA_CARD_STATUS)&DAYNA_TX_READY)==0) { outb(0, ioaddr+COPS_CLEAR_INT); /* Clear interrupts. */ if((inb(ioaddr+DAYNA_CARD_STATUS)&0x03)==DAYNA_RX_REQUEST) cops_rx(dev); /* Kick any packets waiting. */ schedule(); } outb(2, ioaddr); /* Output command packet length as 2. */ outb(0, ioaddr); outb(LAP_INIT, ioaddr); /* Send LAP_INIT command byte. */ outb(nodeid, ioaddr); /* Suggest node address. */ } if(lp->board == TANGENT) { /* Empty any pending adapter responses. */ while(inb(ioaddr+TANG_CARD_STATUS)&TANG_RX_READY) { outb(0, ioaddr+COPS_CLEAR_INT); /* Clear interrupt. */ cops_rx(dev); /* Kick out packets waiting. */ schedule(); } /* Not sure what Tangent does if nodeid picked is used. */ if(nodeid == 0) /* Seed. */ nodeid = jiffies&0xFF; /* Get a random try */ outb(2, ioaddr); /* Command length LSB */ outb(0, ioaddr); /* Command length MSB */ outb(LAP_INIT, ioaddr); /* Send LAP_INIT byte */ outb(nodeid, ioaddr); /* LAP address hint. */ outb(0xFF, ioaddr); /* Int. level to use */ } lp->node_acquire=0; /* Set nodeid holder to 0. */ while(lp->node_acquire==0) /* Get *True* nodeid finally. */ { outb(0, ioaddr+COPS_CLEAR_INT); /* Clear any interrupt. */ if(lp->board == DAYNA) { if((inb(ioaddr+DAYNA_CARD_STATUS)&0x03)==DAYNA_RX_REQUEST) cops_rx(dev); /* Grab the nodeid put in lp->node_acquire. */ } if(lp->board == TANGENT) { if(inb(ioaddr+TANG_CARD_STATUS)&TANG_RX_READY) cops_rx(dev); /* Grab the nodeid put in lp->node_acquire. */ } schedule(); } if(cops_debug > 1) printk(KERN_DEBUG "%s: Node ID %d has been acquired.\n", dev->name, lp->node_acquire); lp->nodeid=1; /* Set got nodeid to 1. */ return 0; } /* * Poll the Tangent type cards to see if we have work. */ static void cops_poll(unsigned long ltdev) { int ioaddr, status; int boguscount = 0; struct net_device *dev = (struct net_device *)ltdev; del_timer(&cops_timer); if(dev == NULL) return; /* We've been downed */ ioaddr = dev->base_addr; do { status=inb(ioaddr+TANG_CARD_STATUS); if(status & TANG_RX_READY) cops_rx(dev); if(status & TANG_TX_READY) netif_wake_queue(dev); status = inb(ioaddr+TANG_CARD_STATUS); } while((++boguscount < 20) && (status&(TANG_RX_READY|TANG_TX_READY))); /* poll 20 times per second */ cops_timer.expires = jiffies + HZ/20; add_timer(&cops_timer); } /* * The typical workload of the driver: * Handle the network interface interrupts. */ static irqreturn_t cops_interrupt(int irq, void *dev_id) { struct net_device *dev = dev_id; struct cops_local *lp; int ioaddr, status; int boguscount = 0; ioaddr = dev->base_addr; lp = netdev_priv(dev); if(lp->board==DAYNA) { do { outb(0, ioaddr + COPS_CLEAR_INT); status=inb(ioaddr+DAYNA_CARD_STATUS); if((status&0x03)==DAYNA_RX_REQUEST) cops_rx(dev); netif_wake_queue(dev); } while(++boguscount < 20); } else { do { status=inb(ioaddr+TANG_CARD_STATUS); if(status & TANG_RX_READY) cops_rx(dev); if(status & TANG_TX_READY) netif_wake_queue(dev); status=inb(ioaddr+TANG_CARD_STATUS); } while((++boguscount < 20) && (status&(TANG_RX_READY|TANG_TX_READY))); } return IRQ_HANDLED; } /* * We have a good packet(s), get it/them out of the buffers. */ static void cops_rx(struct net_device *dev) { int pkt_len = 0; int rsp_type = 0; struct sk_buff *skb = NULL; struct cops_local *lp = netdev_priv(dev); int ioaddr = dev->base_addr; int boguscount = 0; unsigned long flags; spin_lock_irqsave(&lp->lock, flags); if(lp->board==DAYNA) { outb(0, ioaddr); /* Send out Zero length. */ outb(0, ioaddr); outb(DATA_READ, ioaddr); /* Send read command out. */ /* Wait for DMA to turn around. */ while(++boguscount<1000000) { barrier(); if((inb(ioaddr+DAYNA_CARD_STATUS)&0x03)==DAYNA_RX_READY) break; } if(boguscount==1000000) { printk(KERN_WARNING "%s: DMA timed out.\n",dev->name); spin_unlock_irqrestore(&lp->lock, flags); return; } } /* Get response length. */ if(lp->board==DAYNA) pkt_len = inb(ioaddr) & 0xFF; else pkt_len = inb(ioaddr) & 0x00FF; pkt_len |= (inb(ioaddr) << 8); /* Input IO code. */ rsp_type=inb(ioaddr); /* Malloc up new buffer. */ skb = dev_alloc_skb(pkt_len); if(skb == NULL) { printk(KERN_WARNING "%s: Memory squeeze, dropping packet.\n", dev->name); dev->stats.rx_dropped++; while(pkt_len--) /* Discard packet */ inb(ioaddr); spin_unlock_irqrestore(&lp->lock, flags); return; } skb->dev = dev; skb_put(skb, pkt_len); skb->protocol = htons(ETH_P_LOCALTALK); insb(ioaddr, skb->data, pkt_len); /* Eat the Data */ if(lp->board==DAYNA) outb(1, ioaddr+DAYNA_INT_CARD); /* Interrupt the card */ spin_unlock_irqrestore(&lp->lock, flags); /* Restore interrupts. */ /* Check for bad response length */ if(pkt_len < 0 || pkt_len > MAX_LLAP_SIZE) { printk(KERN_WARNING "%s: Bad packet length of %d bytes.\n", dev->name, pkt_len); dev->stats.tx_errors++; dev_kfree_skb_any(skb); return; } /* Set nodeid and then get out. */ if(rsp_type == LAP_INIT_RSP) { /* Nodeid taken from received packet. */ lp->node_acquire = skb->data[0]; dev_kfree_skb_any(skb); return; } /* One last check to make sure we have a good packet. */ if(rsp_type != LAP_RESPONSE) { printk(KERN_WARNING "%s: Bad packet type %d.\n", dev->name, rsp_type); dev->stats.tx_errors++; dev_kfree_skb_any(skb); return; } skb_reset_mac_header(skb); /* Point to entire packet. */ skb_pull(skb,3); skb_reset_transport_header(skb); /* Point to data (Skip header). */ /* Update the counters. */ dev->stats.rx_packets++; dev->stats.rx_bytes += skb->len; /* Send packet to a higher place. */ netif_rx(skb); } static void cops_timeout(struct net_device *dev) { struct cops_local *lp = netdev_priv(dev); int ioaddr = dev->base_addr; dev->stats.tx_errors++; if(lp->board==TANGENT) { if((inb(ioaddr+TANG_CARD_STATUS)&TANG_TX_READY)==0) printk(KERN_WARNING "%s: No TX complete interrupt.\n", dev->name); } printk(KERN_WARNING "%s: Transmit timed out.\n", dev->name); cops_jumpstart(dev); /* Restart the card. */ dev->trans_start = jiffies; /* prevent tx timeout */ netif_wake_queue(dev); } /* * Make the card transmit a LocalTalk packet. */ static netdev_tx_t cops_send_packet(struct sk_buff *skb, struct net_device *dev) { struct cops_local *lp = netdev_priv(dev); int ioaddr = dev->base_addr; unsigned long flags; /* * Block a timer-based transmit from overlapping. */ netif_stop_queue(dev); spin_lock_irqsave(&lp->lock, flags); if(lp->board == DAYNA) /* Wait for adapter transmit buffer. */ while((inb(ioaddr+DAYNA_CARD_STATUS)&DAYNA_TX_READY)==0) cpu_relax(); if(lp->board == TANGENT) /* Wait for adapter transmit buffer. */ while((inb(ioaddr+TANG_CARD_STATUS)&TANG_TX_READY)==0) cpu_relax(); /* Output IO length. */ outb(skb->len, ioaddr); if(lp->board == DAYNA) outb(skb->len >> 8, ioaddr); else outb((skb->len >> 8)&0x0FF, ioaddr); /* Output IO code. */ outb(LAP_WRITE, ioaddr); if(lp->board == DAYNA) /* Check the transmit buffer again. */ while((inb(ioaddr+DAYNA_CARD_STATUS)&DAYNA_TX_READY)==0); outsb(ioaddr, skb->data, skb->len); /* Send out the data. */ if(lp->board==DAYNA) /* Dayna requires you kick the card */ outb(1, ioaddr+DAYNA_INT_CARD); spin_unlock_irqrestore(&lp->lock, flags); /* Restore interrupts. */ /* Done sending packet, update counters and cleanup. */ dev->stats.tx_packets++; dev->stats.tx_bytes += skb->len; dev_kfree_skb (skb); return NETDEV_TX_OK; } /* * Dummy function to keep the Appletalk layer happy. */ static void set_multicast_list(struct net_device *dev) { if(cops_debug >= 3) printk("%s: set_multicast_list executed\n", dev->name); } /* * System ioctls for the COPS LocalTalk card. */ static int cops_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) { struct cops_local *lp = netdev_priv(dev); struct sockaddr_at *sa = (struct sockaddr_at *)&ifr->ifr_addr; struct atalk_addr *aa = (struct atalk_addr *)&lp->node_addr; switch(cmd) { case SIOCSIFADDR: /* Get and set the nodeid and network # atalkd wants. */ cops_nodeid(dev, sa->sat_addr.s_node); aa->s_net = sa->sat_addr.s_net; aa->s_node = lp->node_acquire; /* Set broardcast address. */ dev->broadcast[0] = 0xFF; /* Set hardware address. */ dev->dev_addr[0] = aa->s_node; dev->addr_len = 1; return 0; case SIOCGIFADDR: sa->sat_addr.s_net = aa->s_net; sa->sat_addr.s_node = aa->s_node; return 0; default: return -EOPNOTSUPP; } } /* * The inverse routine to cops_open(). */ static int cops_close(struct net_device *dev) { struct cops_local *lp = netdev_priv(dev); /* If we were running polled, yank the timer. */ if(lp->board==TANGENT && dev->irq==0) del_timer(&cops_timer); netif_stop_queue(dev); return 0; } #ifdef MODULE static struct net_device *cops_dev; MODULE_LICENSE("GPL"); module_param(io, int, 0); module_param(irq, int, 0); module_param(board_type, int, 0); static int __init cops_module_init(void) { if (io == 0) printk(KERN_WARNING "%s: You shouldn't autoprobe with insmod\n", cardname); cops_dev = cops_probe(-1); if (IS_ERR(cops_dev)) return PTR_ERR(cops_dev); return 0; } static void __exit cops_module_exit(void) { unregister_netdev(cops_dev); cleanup_card(cops_dev); free_netdev(cops_dev); } module_init(cops_module_init); module_exit(cops_module_exit); #endif /* MODULE */