/* * * BRIEF MODULE DESCRIPTION * IT8172 IDE controller support * * Copyright (C) 2000 MontaVista Software Inc. * Copyright (C) 2008 Shane McDonald * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * You should have received a copy of the GNU General Public License along * with this program; if not, write to the Free Software Foundation, Inc., * 675 Mass Ave, Cambridge, MA 02139, USA. */ #include <linux/module.h> #include <linux/types.h> #include <linux/kernel.h> #include <linux/ioport.h> #include <linux/pci.h> #include <linux/ide.h> #include <linux/init.h> #define DRV_NAME "IT8172" static void it8172_set_pio_mode(ide_drive_t *drive, const u8 pio) { ide_hwif_t *hwif = drive->hwif; struct pci_dev *dev = to_pci_dev(hwif->dev); u16 drive_enables; u32 drive_timing; /* * The highest value of DIOR/DIOW pulse width and recovery time * that can be set in the IT8172 is 8 PCI clock cycles. As a result, * it cannot be configured for PIO mode 0. This table sets these * parameters to the maximum supported by the IT8172. */ static const u8 timings[] = { 0x3f, 0x3c, 0x1b, 0x12, 0x0a }; pci_read_config_word(dev, 0x40, &drive_enables); pci_read_config_dword(dev, 0x44, &drive_timing); /* * Enable port 0x44. The IT8172 spec is confused; it calls * this register the "Slave IDE Timing Register", but in fact, * it controls timing for both master and slave drives. */ drive_enables |= 0x4000; drive_enables &= drive->dn ? 0xc006 : 0xc060; if (drive->media == ide_disk) /* enable prefetch */ drive_enables |= 0x0004 << (drive->dn * 4); if (ata_id_has_iordy(drive->id)) /* enable IORDY sample-point */ drive_enables |= 0x0002 << (drive->dn * 4); drive_timing &= drive->dn ? 0x00003f00 : 0x000fc000; drive_timing |= timings[pio] << (drive->dn * 6 + 8); pci_write_config_word(dev, 0x40, drive_enables); pci_write_config_dword(dev, 0x44, drive_timing); } static void it8172_set_dma_mode(ide_drive_t *drive, const u8 speed) { ide_hwif_t *hwif = drive->hwif; struct pci_dev *dev = to_pci_dev(hwif->dev); int a_speed = 3 << (drive->dn * 4); int u_flag = 1 << drive->dn; int u_speed = 0; u8 reg48, reg4a; pci_read_config_byte(dev, 0x48, ®48); pci_read_config_byte(dev, 0x4a, ®4a); if (speed >= XFER_UDMA_0) { u8 udma = speed - XFER_UDMA_0; u_speed = udma << (drive->dn * 4); pci_write_config_byte(dev, 0x48, reg48 | u_flag); reg4a &= ~a_speed; pci_write_config_byte(dev, 0x4a, reg4a | u_speed); } else { const u8 mwdma_to_pio[] = { 0, 3, 4 }; u8 pio; pci_write_config_byte(dev, 0x48, reg48 & ~u_flag); pci_write_config_byte(dev, 0x4a, reg4a & ~a_speed); pio = mwdma_to_pio[speed - XFER_MW_DMA_0]; it8172_set_pio_mode(drive, pio); } } static const struct ide_port_ops it8172_port_ops = { .set_pio_mode = it8172_set_pio_mode, .set_dma_mode = it8172_set_dma_mode, }; static const struct ide_port_info it8172_port_info __devinitdata = { .name = DRV_NAME, .port_ops = &it8172_port_ops, .enablebits = { {0x41, 0x80, 0x80}, {0x00, 0x00, 0x00} }, .host_flags = IDE_HFLAG_SINGLE, .pio_mask = ATA_PIO4 & ~ATA_PIO0, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA2, }; static int __devinit it8172_init_one(struct pci_dev *dev, const struct pci_device_id *id) { if ((dev->class >> 8) != PCI_CLASS_STORAGE_IDE) return -ENODEV; /* IT8172 is more than an IDE controller */ return ide_pci_init_one(dev, &it8172_port_info, NULL); } static struct pci_device_id it8172_pci_tbl[] = { { PCI_VDEVICE(ITE, PCI_DEVICE_ID_ITE_8172), 0 }, { 0, }, }; MODULE_DEVICE_TABLE(pci, it8172_pci_tbl); static struct pci_driver it8172_pci_driver = { .name = "IT8172_IDE", .id_table = it8172_pci_tbl, .probe = it8172_init_one, .remove = ide_pci_remove, .suspend = ide_pci_suspend, .resume = ide_pci_resume, }; static int __init it8172_ide_init(void) { return ide_pci_register_driver(&it8172_pci_driver); } static void __exit it8172_ide_exit(void) { pci_unregister_driver(&it8172_pci_driver); } module_init(it8172_ide_init); module_exit(it8172_ide_exit); MODULE_AUTHOR("Steve Longerbeam"); MODULE_DESCRIPTION("PCI driver module for ITE 8172 IDE"); MODULE_LICENSE("GPL");