/* * lm63.c - driver for the National Semiconductor LM63 temperature sensor * with integrated fan control * Copyright (C) 2004-2005 Jean Delvare * Based on the lm90 driver. * * The LM63 is a sensor chip made by National Semiconductor. It measures * two temperatures (its own and one external one) and the speed of one * fan, those speed it can additionally control. Complete datasheet can be * obtained from National's website at: * http://www.national.com/pf/LM/LM63.html * * The LM63 is basically an LM86 with fan speed monitoring and control * capabilities added. It misses some of the LM86 features though: * - No low limit for local temperature. * - No critical limit for local temperature. * - Critical limit for remote temperature can be changed only once. We * will consider that the critical limit is read-only. * * The datasheet isn't very clear about what the tachometer reading is. * I had a explanation from National Semiconductor though. The two lower * bits of the read value have to be masked out. The value is still 16 bit * in width. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include #include #include #include #include #include #include #include #include /* * Addresses to scan * Address is fully defined internally and cannot be changed. */ static unsigned short normal_i2c[] = { 0x4c, I2C_CLIENT_END }; /* * Insmod parameters */ I2C_CLIENT_INSMOD_1(lm63); /* * The LM63 registers */ #define LM63_REG_CONFIG1 0x03 #define LM63_REG_CONFIG2 0xBF #define LM63_REG_CONFIG_FAN 0x4A #define LM63_REG_TACH_COUNT_MSB 0x47 #define LM63_REG_TACH_COUNT_LSB 0x46 #define LM63_REG_TACH_LIMIT_MSB 0x49 #define LM63_REG_TACH_LIMIT_LSB 0x48 #define LM63_REG_PWM_VALUE 0x4C #define LM63_REG_PWM_FREQ 0x4D #define LM63_REG_LOCAL_TEMP 0x00 #define LM63_REG_LOCAL_HIGH 0x05 #define LM63_REG_REMOTE_TEMP_MSB 0x01 #define LM63_REG_REMOTE_TEMP_LSB 0x10 #define LM63_REG_REMOTE_OFFSET_MSB 0x11 #define LM63_REG_REMOTE_OFFSET_LSB 0x12 #define LM63_REG_REMOTE_HIGH_MSB 0x07 #define LM63_REG_REMOTE_HIGH_LSB 0x13 #define LM63_REG_REMOTE_LOW_MSB 0x08 #define LM63_REG_REMOTE_LOW_LSB 0x14 #define LM63_REG_REMOTE_TCRIT 0x19 #define LM63_REG_REMOTE_TCRIT_HYST 0x21 #define LM63_REG_ALERT_STATUS 0x02 #define LM63_REG_ALERT_MASK 0x16 #define LM63_REG_MAN_ID 0xFE #define LM63_REG_CHIP_ID 0xFF /* * Conversions and various macros * For tachometer counts, the LM63 uses 16-bit values. * For local temperature and high limit, remote critical limit and hysteresis * value, it uses signed 8-bit values with LSB = 1 degree Celsius. * For remote temperature, low and high limits, it uses signed 11-bit values * with LSB = 0.125 degree Celsius, left-justified in 16-bit registers. */ #define FAN_FROM_REG(reg) ((reg) == 0xFFFC || (reg) == 0 ? 0 : \ 5400000 / (reg)) #define FAN_TO_REG(val) ((val) <= 82 ? 0xFFFC : \ (5400000 / (val)) & 0xFFFC) #define TEMP8_FROM_REG(reg) ((reg) * 1000) #define TEMP8_TO_REG(val) ((val) <= -128000 ? -128 : \ (val) >= 127000 ? 127 : \ (val) < 0 ? ((val) - 500) / 1000 : \ ((val) + 500) / 1000) #define TEMP11_FROM_REG(reg) ((reg) / 32 * 125) #define TEMP11_TO_REG(val) ((val) <= -128000 ? 0x8000 : \ (val) >= 127875 ? 0x7FE0 : \ (val) < 0 ? ((val) - 62) / 125 * 32 : \ ((val) + 62) / 125 * 32) #define HYST_TO_REG(val) ((val) <= 0 ? 0 : \ (val) >= 127000 ? 127 : \ ((val) + 500) / 1000) /* * Functions declaration */ static int lm63_attach_adapter(struct i2c_adapter *adapter); static int lm63_detach_client(struct i2c_client *client); static struct lm63_data *lm63_update_device(struct device *dev); static int lm63_detect(struct i2c_adapter *adapter, int address, int kind); static void lm63_init_client(struct i2c_client *client); /* * Driver data (common to all clients) */ static struct i2c_driver lm63_driver = { .driver = { .name = "lm63", }, .attach_adapter = lm63_attach_adapter, .detach_client = lm63_detach_client, }; /* * Client data (each client gets its own) */ struct lm63_data { struct i2c_client client; struct class_device *class_dev; struct mutex update_lock; char valid; /* zero until following fields are valid */ unsigned long last_updated; /* in jiffies */ /* registers values */ u8 config, config_fan; u16 fan[2]; /* 0: input 1: low limit */ u8 pwm1_freq; u8 pwm1_value; s8 temp8[3]; /* 0: local input 1: local high limit 2: remote critical limit */ s16 temp11[3]; /* 0: remote input 1: remote low limit 2: remote high limit */ u8 temp2_crit_hyst; u8 alarms; }; /* * Sysfs callback functions and files */ static ssize_t show_fan(struct device *dev, struct device_attribute *devattr, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct lm63_data *data = lm63_update_device(dev); return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[attr->index])); } static ssize_t set_fan(struct device *dev, struct device_attribute *dummy, const char *buf, size_t count) { struct i2c_client *client = to_i2c_client(dev); struct lm63_data *data = i2c_get_clientdata(client); unsigned long val = simple_strtoul(buf, NULL, 10); mutex_lock(&data->update_lock); data->fan[1] = FAN_TO_REG(val); i2c_smbus_write_byte_data(client, LM63_REG_TACH_LIMIT_LSB, data->fan[1] & 0xFF); i2c_smbus_write_byte_data(client, LM63_REG_TACH_LIMIT_MSB, data->fan[1] >> 8); mutex_unlock(&data->update_lock); return count; } static ssize_t show_pwm1(struct device *dev, struct device_attribute *dummy, char *buf) { struct lm63_data *data = lm63_update_device(dev); return sprintf(buf, "%d\n", data->pwm1_value >= 2 * data->pwm1_freq ? 255 : (data->pwm1_value * 255 + data->pwm1_freq) / (2 * data->pwm1_freq)); } static ssize_t set_pwm1(struct device *dev, struct device_attribute *dummy, const char *buf, size_t count) { struct i2c_client *client = to_i2c_client(dev); struct lm63_data *data = i2c_get_clientdata(client); unsigned long val; if (!(data->config_fan & 0x20)) /* register is read-only */ return -EPERM; val = simple_strtoul(buf, NULL, 10); mutex_lock(&data->update_lock); data->pwm1_value = val <= 0 ? 0 : val >= 255 ? 2 * data->pwm1_freq : (val * data->pwm1_freq * 2 + 127) / 255; i2c_smbus_write_byte_data(client, LM63_REG_PWM_VALUE, data->pwm1_value); mutex_unlock(&data->update_lock); return count; } static ssize_t show_pwm1_enable(struct device *dev, struct device_attribute *dummy, char *buf) { struct lm63_data *data = lm63_update_device(dev); return sprintf(buf, "%d\n", data->config_fan & 0x20 ? 1 : 2); } static ssize_t show_temp8(struct device *dev, struct device_attribute *devattr, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct lm63_data *data = lm63_update_device(dev); return sprintf(buf, "%d\n", TEMP8_FROM_REG(data->temp8[attr->index])); } static ssize_t set_temp8(struct device *dev, struct device_attribute *dummy, const char *buf, size_t count) { struct i2c_client *client = to_i2c_client(dev); struct lm63_data *data = i2c_get_clientdata(client); long val = simple_strtol(buf, NULL, 10); mutex_lock(&data->update_lock); data->temp8[1] = TEMP8_TO_REG(val); i2c_smbus_write_byte_data(client, LM63_REG_LOCAL_HIGH, data->temp8[1]); mutex_unlock(&data->update_lock); return count; } static ssize_t show_temp11(struct device *dev, struct device_attribute *devattr, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct lm63_data *data = lm63_update_device(dev); return sprintf(buf, "%d\n", TEMP11_FROM_REG(data->temp11[attr->index])); } static ssize_t set_temp11(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) { static const u8 reg[4] = { LM63_REG_REMOTE_LOW_MSB, LM63_REG_REMOTE_LOW_LSB, LM63_REG_REMOTE_HIGH_MSB, LM63_REG_REMOTE_HIGH_LSB, }; struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct lm63_data *data = i2c_get_clientdata(client); long val = simple_strtol(buf, NULL, 10); int nr = attr->index; mutex_lock(&data->update_lock); data->temp11[nr] = TEMP11_TO_REG(val); i2c_smbus_write_byte_data(client, reg[(nr - 1) * 2], data->temp11[nr] >> 8); i2c_smbus_write_byte_data(client, reg[(nr - 1) * 2 + 1], data->temp11[nr] & 0xff); mutex_unlock(&data->update_lock); return count; } /* Hysteresis register holds a relative value, while we want to present an absolute to user-space */ static ssize_t show_temp2_crit_hyst(struct device *dev, struct device_attribute *dummy, char *buf) { struct lm63_data *data = lm63_update_device(dev); return sprintf(buf, "%d\n", TEMP8_FROM_REG(data->temp8[2]) - TEMP8_FROM_REG(data->temp2_crit_hyst)); } /* And now the other way around, user-space provides an absolute hysteresis value and we have to store a relative one */ static ssize_t set_temp2_crit_hyst(struct device *dev, struct device_attribute *dummy, const char *buf, size_t count) { struct i2c_client *client = to_i2c_client(dev); struct lm63_data *data = i2c_get_clientdata(client); long val = simple_strtol(buf, NULL, 10); long hyst; mutex_lock(&data->update_lock); hyst = TEMP8_FROM_REG(data->temp8[2]) - val; i2c_smbus_write_byte_data(client, LM63_REG_REMOTE_TCRIT_HYST, HYST_TO_REG(hyst)); mutex_unlock(&data->update_lock); return count; } static ssize_t show_alarms(struct device *dev, struct device_attribute *dummy, char *buf) { struct lm63_data *data = lm63_update_device(dev); return sprintf(buf, "%u\n", data->alarms); } static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0); static SENSOR_DEVICE_ATTR(fan1_min, S_IWUSR | S_IRUGO, show_fan, set_fan, 1); static DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm1, set_pwm1); static DEVICE_ATTR(pwm1_enable, S_IRUGO, show_pwm1_enable, NULL); static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp8, NULL, 0); static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp8, set_temp8, 1); static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp11, NULL, 0); static SENSOR_DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_temp11, set_temp11, 1); static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp11, set_temp11, 2); static SENSOR_DEVICE_ATTR(temp2_crit, S_IRUGO, show_temp8, NULL, 2); static DEVICE_ATTR(temp2_crit_hyst, S_IWUSR | S_IRUGO, show_temp2_crit_hyst, set_temp2_crit_hyst); static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); /* * Real code */ static int lm63_attach_adapter(struct i2c_adapter *adapter) { if (!(adapter->class & I2C_CLASS_HWMON)) return 0; return i2c_probe(adapter, &addr_data, lm63_detect); } /* * The following function does more than just detection. If detection * succeeds, it also registers the new chip. */ static int lm63_detect(struct i2c_adapter *adapter, int address, int kind) { struct i2c_client *new_client; struct lm63_data *data; int err = 0; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) goto exit; if (!(data = kzalloc(sizeof(struct lm63_data), GFP_KERNEL))) { err = -ENOMEM; goto exit; } /* The common I2C client data is placed right before the LM63-specific data. */ new_client = &data->client; i2c_set_clientdata(new_client, data); new_client->addr = address; new_client->adapter = adapter; new_client->driver = &lm63_driver; new_client->flags = 0; /* Default to an LM63 if forced */ if (kind == 0) kind = lm63; if (kind < 0) { /* must identify */ u8 man_id, chip_id, reg_config1, reg_config2; u8 reg_alert_status, reg_alert_mask; man_id = i2c_smbus_read_byte_data(new_client, LM63_REG_MAN_ID); chip_id = i2c_smbus_read_byte_data(new_client, LM63_REG_CHIP_ID); reg_config1 = i2c_smbus_read_byte_data(new_client, LM63_REG_CONFIG1); reg_config2 = i2c_smbus_read_byte_data(new_client, LM63_REG_CONFIG2); reg_alert_status = i2c_smbus_read_byte_data(new_client, LM63_REG_ALERT_STATUS); reg_alert_mask = i2c_smbus_read_byte_data(new_client, LM63_REG_ALERT_MASK); if (man_id == 0x01 /* National Semiconductor */ && chip_id == 0x41 /* LM63 */ && (reg_config1 & 0x18) == 0x00 && (reg_config2 & 0xF8) == 0x00 && (reg_alert_status & 0x20) == 0x00 && (reg_alert_mask & 0xA4) == 0xA4) { kind = lm63; } else { /* failed */ dev_dbg(&adapter->dev, "Unsupported chip " "(man_id=0x%02X, chip_id=0x%02X).\n", man_id, chip_id); goto exit_free; } } strlcpy(new_client->name, "lm63", I2C_NAME_SIZE); data->valid = 0; mutex_init(&data->update_lock); /* Tell the I2C layer a new client has arrived */ if ((err = i2c_attach_client(new_client))) goto exit_free; /* Initialize the LM63 chip */ lm63_init_client(new_client); /* Register sysfs hooks */ data->class_dev = hwmon_device_register(&new_client->dev); if (IS_ERR(data->class_dev)) { err = PTR_ERR(data->class_dev); goto exit_detach; } if (data->config & 0x04) { /* tachometer enabled */ device_create_file(&new_client->dev, &sensor_dev_attr_fan1_input.dev_attr); device_create_file(&new_client->dev, &sensor_dev_attr_fan1_min.dev_attr); } device_create_file(&new_client->dev, &dev_attr_pwm1); device_create_file(&new_client->dev, &dev_attr_pwm1_enable); device_create_file(&new_client->dev, &sensor_dev_attr_temp1_input.dev_attr); device_create_file(&new_client->dev, &sensor_dev_attr_temp2_input.dev_attr); device_create_file(&new_client->dev, &sensor_dev_attr_temp2_min.dev_attr); device_create_file(&new_client->dev, &sensor_dev_attr_temp1_max.dev_attr); device_create_file(&new_client->dev, &sensor_dev_attr_temp2_max.dev_attr); device_create_file(&new_client->dev, &sensor_dev_attr_temp2_crit.dev_attr); device_create_file(&new_client->dev, &dev_attr_temp2_crit_hyst); device_create_file(&new_client->dev, &dev_attr_alarms); return 0; exit_detach: i2c_detach_client(new_client); exit_free: kfree(data); exit: return err; } /* Idealy we shouldn't have to initialize anything, since the BIOS should have taken care of everything */ static void lm63_init_client(struct i2c_client *client) { struct lm63_data *data = i2c_get_clientdata(client); data->config = i2c_smbus_read_byte_data(client, LM63_REG_CONFIG1); data->config_fan = i2c_smbus_read_byte_data(client, LM63_REG_CONFIG_FAN); /* Start converting if needed */ if (data->config & 0x40) { /* standby */ dev_dbg(&client->dev, "Switching to operational mode"); data->config &= 0xA7; i2c_smbus_write_byte_data(client, LM63_REG_CONFIG1, data->config); } /* We may need pwm1_freq before ever updating the client data */ data->pwm1_freq = i2c_smbus_read_byte_data(client, LM63_REG_PWM_FREQ); if (data->pwm1_freq == 0) data->pwm1_freq = 1; /* Show some debug info about the LM63 configuration */ dev_dbg(&client->dev, "Alert/tach pin configured for %s\n", (data->config & 0x04) ? "tachometer input" : "alert output"); dev_dbg(&client->dev, "PWM clock %s kHz, output frequency %u Hz\n", (data->config_fan & 0x08) ? "1.4" : "360", ((data->config_fan & 0x08) ? 700 : 180000) / data->pwm1_freq); dev_dbg(&client->dev, "PWM output active %s, %s mode\n", (data->config_fan & 0x10) ? "low" : "high", (data->config_fan & 0x20) ? "manual" : "auto"); } static int lm63_detach_client(struct i2c_client *client) { struct lm63_data *data = i2c_get_clientdata(client); int err; hwmon_device_unregister(data->class_dev); if ((err = i2c_detach_client(client))) return err; kfree(data); return 0; } static struct lm63_data *lm63_update_device(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); struct lm63_data *data = i2c_get_clientdata(client); mutex_lock(&data->update_lock); if (time_after(jiffies, data->last_updated + HZ) || !data->valid) { if (data->config & 0x04) { /* tachometer enabled */ /* order matters for fan1_input */ data->fan[0] = i2c_smbus_read_byte_data(client, LM63_REG_TACH_COUNT_LSB) & 0xFC; data->fan[0] |= i2c_smbus_read_byte_data(client, LM63_REG_TACH_COUNT_MSB) << 8; data->fan[1] = (i2c_smbus_read_byte_data(client, LM63_REG_TACH_LIMIT_LSB) & 0xFC) | (i2c_smbus_read_byte_data(client, LM63_REG_TACH_LIMIT_MSB) << 8); } data->pwm1_freq = i2c_smbus_read_byte_data(client, LM63_REG_PWM_FREQ); if (data->pwm1_freq == 0) data->pwm1_freq = 1; data->pwm1_value = i2c_smbus_read_byte_data(client, LM63_REG_PWM_VALUE); data->temp8[0] = i2c_smbus_read_byte_data(client, LM63_REG_LOCAL_TEMP); data->temp8[1] = i2c_smbus_read_byte_data(client, LM63_REG_LOCAL_HIGH); /* order matters for temp2_input */ data->temp11[0] = i2c_smbus_read_byte_data(client, LM63_REG_REMOTE_TEMP_MSB) << 8; data->temp11[0] |= i2c_smbus_read_byte_data(client, LM63_REG_REMOTE_TEMP_LSB); data->temp11[1] = (i2c_smbus_read_byte_data(client, LM63_REG_REMOTE_LOW_MSB) << 8) | i2c_smbus_read_byte_data(client, LM63_REG_REMOTE_LOW_LSB); data->temp11[2] = (i2c_smbus_read_byte_data(client, LM63_REG_REMOTE_HIGH_MSB) << 8) | i2c_smbus_read_byte_data(client, LM63_REG_REMOTE_HIGH_LSB); data->temp8[2] = i2c_smbus_read_byte_data(client, LM63_REG_REMOTE_TCRIT); data->temp2_crit_hyst = i2c_smbus_read_byte_data(client, LM63_REG_REMOTE_TCRIT_HYST); data->alarms = i2c_smbus_read_byte_data(client, LM63_REG_ALERT_STATUS) & 0x7F; data->last_updated = jiffies; data->valid = 1; } mutex_unlock(&data->update_lock); return data; } static int __init sensors_lm63_init(void) { return i2c_add_driver(&lm63_driver); } static void __exit sensors_lm63_exit(void) { i2c_del_driver(&lm63_driver); } MODULE_AUTHOR("Jean Delvare "); MODULE_DESCRIPTION("LM63 driver"); MODULE_LICENSE("GPL"); module_init(sensors_lm63_init); module_exit(sensors_lm63_exit);