/* * HID driver for some petalynx "special" devices * * Copyright (c) 1999 Andreas Gal * Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz> * Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc * Copyright (c) 2006-2007 Jiri Kosina * Copyright (c) 2007 Paul Walmsley * Copyright (c) 2008 Jiri Slaby */ /* * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the Free * Software Foundation; either version 2 of the License, or (at your option) * any later version. */ #include <linux/device.h> #include <linux/hid.h> #include <linux/module.h> #include "hid-ids.h" /* Petalynx Maxter Remote has maximum for consumer page set too low */ static void pl_report_fixup(struct hid_device *hdev, __u8 *rdesc, unsigned int rsize) { if (rsize >= 60 && rdesc[39] == 0x2a && rdesc[40] == 0xf5 && rdesc[41] == 0x00 && rdesc[59] == 0x26 && rdesc[60] == 0xf9 && rdesc[61] == 0x00) { dev_info(&hdev->dev, "fixing up Petalynx Maxter Remote report " "descriptor\n"); rdesc[60] = 0xfa; rdesc[40] = 0xfa; } } #define pl_map_key_clear(c) hid_map_usage_clear(hi, usage, bit, max, \ EV_KEY, (c)) static int pl_input_mapping(struct hid_device *hdev, struct hid_input *hi, struct hid_field *field, struct hid_usage *usage, unsigned long **bit, int *max) { if ((usage->hid & HID_USAGE_PAGE) == HID_UP_LOGIVENDOR) { switch (usage->hid & HID_USAGE) { case 0x05a: pl_map_key_clear(KEY_TEXT); break; case 0x05b: pl_map_key_clear(KEY_RED); break; case 0x05c: pl_map_key_clear(KEY_GREEN); break; case 0x05d: pl_map_key_clear(KEY_YELLOW); break; case 0x05e: pl_map_key_clear(KEY_BLUE); break; default: return 0; } return 1; } if ((usage->hid & HID_USAGE_PAGE) == HID_UP_CONSUMER) { switch (usage->hid & HID_USAGE) { case 0x0f6: pl_map_key_clear(KEY_NEXT); break; case 0x0fa: pl_map_key_clear(KEY_BACK); break; default: return 0; } return 1; } return 0; } static int pl_probe(struct hid_device *hdev, const struct hid_device_id *id) { int ret; hdev->quirks |= HID_QUIRK_NOGET; ret = hid_parse(hdev); if (ret) { dev_err(&hdev->dev, "parse failed\n"); goto err_free; } ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT); if (ret) { dev_err(&hdev->dev, "hw start failed\n"); goto err_free; } return 0; err_free: return ret; } static const struct hid_device_id pl_devices[] = { { HID_USB_DEVICE(USB_VENDOR_ID_PETALYNX, USB_DEVICE_ID_PETALYNX_MAXTER_REMOTE) }, { } }; MODULE_DEVICE_TABLE(hid, pl_devices); static struct hid_driver pl_driver = { .name = "petalynx", .id_table = pl_devices, .report_fixup = pl_report_fixup, .input_mapping = pl_input_mapping, .probe = pl_probe, }; static int pl_init(void) { return hid_register_driver(&pl_driver); } static void pl_exit(void) { hid_unregister_driver(&pl_driver); } module_init(pl_init); module_exit(pl_exit); MODULE_LICENSE("GPL"); HID_COMPAT_LOAD_DRIVER(petalynx);