/* i915_irq.c -- IRQ support for the I915 -*- linux-c -*- */ /* * Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas. * All Rights Reserved. * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the * "Software"), to deal in the Software without restriction, including * without limitation the rights to use, copy, modify, merge, publish, * distribute, sub license, and/or sell copies of the Software, and to * permit persons to whom the Software is furnished to do so, subject to * the following conditions: * * The above copyright notice and this permission notice (including the * next paragraph) shall be included in all copies or substantial portions * of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. * IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. * */ #include "drmP.h" #include "drm.h" #include "i915_drm.h" #include "i915_drv.h" #define MAX_NOPID ((u32)~0) /** These are the interrupts used by the driver */ #define I915_INTERRUPT_ENABLE_MASK (I915_USER_INTERRUPT | \ I915_ASLE_INTERRUPT | \ I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | \ I915_DISPLAY_PIPE_B_EVENT_INTERRUPT) void i915_enable_irq(drm_i915_private_t *dev_priv, u32 mask) { if ((dev_priv->irq_mask_reg & mask) != 0) { dev_priv->irq_mask_reg &= ~mask; I915_WRITE(IMR, dev_priv->irq_mask_reg); (void) I915_READ(IMR); } } static inline void i915_disable_irq(drm_i915_private_t *dev_priv, u32 mask) { if ((dev_priv->irq_mask_reg & mask) != mask) { dev_priv->irq_mask_reg |= mask; I915_WRITE(IMR, dev_priv->irq_mask_reg); (void) I915_READ(IMR); } } /** * i915_pipe_enabled - check if a pipe is enabled * @dev: DRM device * @pipe: pipe to check * * Reading certain registers when the pipe is disabled can hang the chip. * Use this routine to make sure the PLL is running and the pipe is active * before reading such registers if unsure. */ static int i915_pipe_enabled(struct drm_device *dev, int pipe) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; unsigned long pipeconf = pipe ? PIPEBCONF : PIPEACONF; if (I915_READ(pipeconf) & PIPEACONF_ENABLE) return 1; return 0; } /* Called from drm generic code, passed a 'crtc', which * we use as a pipe index */ u32 i915_get_vblank_counter(struct drm_device *dev, int pipe) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; unsigned long high_frame; unsigned long low_frame; u32 high1, high2, low, count; high_frame = pipe ? PIPEBFRAMEHIGH : PIPEAFRAMEHIGH; low_frame = pipe ? PIPEBFRAMEPIXEL : PIPEAFRAMEPIXEL; if (!i915_pipe_enabled(dev, pipe)) { DRM_ERROR("trying to get vblank count for disabled pipe %d\n", pipe); return 0; } /* * High & low register fields aren't synchronized, so make sure * we get a low value that's stable across two reads of the high * register. */ do { high1 = ((I915_READ(high_frame) & PIPE_FRAME_HIGH_MASK) >> PIPE_FRAME_HIGH_SHIFT); low = ((I915_READ(low_frame) & PIPE_FRAME_LOW_MASK) >> PIPE_FRAME_LOW_SHIFT); high2 = ((I915_READ(high_frame) & PIPE_FRAME_HIGH_MASK) >> PIPE_FRAME_HIGH_SHIFT); } while (high1 != high2); count = (high1 << 8) | low; return count; } irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS) { struct drm_device *dev = (struct drm_device *) arg; drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; u32 iir; u32 pipea_stats, pipeb_stats; int vblank = 0; atomic_inc(&dev_priv->irq_received); if (dev->pdev->msi_enabled) I915_WRITE(IMR, ~0); iir = I915_READ(IIR); if (iir == 0) { if (dev->pdev->msi_enabled) { I915_WRITE(IMR, dev_priv->irq_mask_reg); (void) I915_READ(IMR); } return IRQ_NONE; } /* * Clear the PIPE(A|B)STAT regs before the IIR otherwise * we may get extra interrupts. */ if (iir & I915_DISPLAY_PIPE_A_EVENT_INTERRUPT) { pipea_stats = I915_READ(PIPEASTAT); if (!(dev_priv->vblank_pipe & DRM_I915_VBLANK_PIPE_A)) pipea_stats &= ~(PIPE_START_VBLANK_INTERRUPT_ENABLE | PIPE_VBLANK_INTERRUPT_ENABLE); else if (pipea_stats & (PIPE_START_VBLANK_INTERRUPT_STATUS| PIPE_VBLANK_INTERRUPT_STATUS)) { vblank++; drm_handle_vblank(dev, 0); } I915_WRITE(PIPEASTAT, pipea_stats); } if (iir & I915_DISPLAY_PIPE_B_EVENT_INTERRUPT) { pipeb_stats = I915_READ(PIPEBSTAT); /* Ack the event */ I915_WRITE(PIPEBSTAT, pipeb_stats); /* The vblank interrupt gets enabled even if we didn't ask for it, so make sure it's shut down again */ if (!(dev_priv->vblank_pipe & DRM_I915_VBLANK_PIPE_B)) pipeb_stats &= ~(PIPE_START_VBLANK_INTERRUPT_ENABLE | PIPE_VBLANK_INTERRUPT_ENABLE); else if (pipeb_stats & (PIPE_START_VBLANK_INTERRUPT_STATUS| PIPE_VBLANK_INTERRUPT_STATUS)) { vblank++; drm_handle_vblank(dev, 1); } if (pipeb_stats & I915_LEGACY_BLC_EVENT_STATUS) opregion_asle_intr(dev); I915_WRITE(PIPEBSTAT, pipeb_stats); } I915_WRITE(IIR, iir); if (dev->pdev->msi_enabled) I915_WRITE(IMR, dev_priv->irq_mask_reg); (void) I915_READ(IIR); /* Flush posted writes */ if (dev_priv->sarea_priv) dev_priv->sarea_priv->last_dispatch = READ_BREADCRUMB(dev_priv); if (iir & I915_USER_INTERRUPT) { dev_priv->mm.irq_gem_seqno = i915_get_gem_seqno(dev); DRM_WAKEUP(&dev_priv->irq_queue); } if (iir & I915_ASLE_INTERRUPT) opregion_asle_intr(dev); return IRQ_HANDLED; } static int i915_emit_irq(struct drm_device * dev) { drm_i915_private_t *dev_priv = dev->dev_private; RING_LOCALS; i915_kernel_lost_context(dev); DRM_DEBUG("\n"); dev_priv->counter++; if (dev_priv->counter > 0x7FFFFFFFUL) dev_priv->counter = 1; if (dev_priv->sarea_priv) dev_priv->sarea_priv->last_enqueue = dev_priv->counter; BEGIN_LP_RING(4); OUT_RING(MI_STORE_DWORD_INDEX); OUT_RING(I915_BREADCRUMB_INDEX << MI_STORE_DWORD_INDEX_SHIFT); OUT_RING(dev_priv->counter); OUT_RING(MI_USER_INTERRUPT); ADVANCE_LP_RING(); return dev_priv->counter; } void i915_user_irq_get(struct drm_device *dev) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; unsigned long irqflags; spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags); if (dev->irq_enabled && (++dev_priv->user_irq_refcount == 1)) i915_enable_irq(dev_priv, I915_USER_INTERRUPT); spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags); } void i915_user_irq_put(struct drm_device *dev) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; unsigned long irqflags; spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags); BUG_ON(dev->irq_enabled && dev_priv->user_irq_refcount <= 0); if (dev->irq_enabled && (--dev_priv->user_irq_refcount == 0)) i915_disable_irq(dev_priv, I915_USER_INTERRUPT); spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags); } static int i915_wait_irq(struct drm_device * dev, int irq_nr) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; int ret = 0; DRM_DEBUG("irq_nr=%d breadcrumb=%d\n", irq_nr, READ_BREADCRUMB(dev_priv)); if (READ_BREADCRUMB(dev_priv) >= irq_nr) { if (dev_priv->sarea_priv) { dev_priv->sarea_priv->last_dispatch = READ_BREADCRUMB(dev_priv); } return 0; } if (dev_priv->sarea_priv) dev_priv->sarea_priv->perf_boxes |= I915_BOX_WAIT; i915_user_irq_get(dev); DRM_WAIT_ON(ret, dev_priv->irq_queue, 3 * DRM_HZ, READ_BREADCRUMB(dev_priv) >= irq_nr); i915_user_irq_put(dev); if (ret == -EBUSY) { DRM_ERROR("EBUSY -- rec: %d emitted: %d\n", READ_BREADCRUMB(dev_priv), (int)dev_priv->counter); } if (dev_priv->sarea_priv) dev_priv->sarea_priv->last_dispatch = READ_BREADCRUMB(dev_priv); return ret; } /* Needs the lock as it touches the ring. */ int i915_irq_emit(struct drm_device *dev, void *data, struct drm_file *file_priv) { drm_i915_private_t *dev_priv = dev->dev_private; drm_i915_irq_emit_t *emit = data; int result; RING_LOCK_TEST_WITH_RETURN(dev, file_priv); if (!dev_priv) { DRM_ERROR("called with no initialization\n"); return -EINVAL; } mutex_lock(&dev->struct_mutex); result = i915_emit_irq(dev); mutex_unlock(&dev->struct_mutex); if (DRM_COPY_TO_USER(emit->irq_seq, &result, sizeof(int))) { DRM_ERROR("copy_to_user\n"); return -EFAULT; } return 0; } /* Doesn't need the hardware lock. */ int i915_irq_wait(struct drm_device *dev, void *data, struct drm_file *file_priv) { drm_i915_private_t *dev_priv = dev->dev_private; drm_i915_irq_wait_t *irqwait = data; if (!dev_priv) { DRM_ERROR("called with no initialization\n"); return -EINVAL; } return i915_wait_irq(dev, irqwait->irq_seq); } /* Called from drm generic code, passed 'crtc' which * we use as a pipe index */ int i915_enable_vblank(struct drm_device *dev, int pipe) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; u32 pipestat_reg = 0; u32 pipestat; u32 interrupt = 0; unsigned long irqflags; switch (pipe) { case 0: pipestat_reg = PIPEASTAT; interrupt = I915_DISPLAY_PIPE_A_EVENT_INTERRUPT; break; case 1: pipestat_reg = PIPEBSTAT; interrupt = I915_DISPLAY_PIPE_B_EVENT_INTERRUPT; break; default: DRM_ERROR("tried to enable vblank on non-existent pipe %d\n", pipe); return 0; } spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags); /* Enabling vblank events in IMR comes before PIPESTAT write, or * there's a race where the PIPESTAT vblank bit gets set to 1, so * the OR of enabled PIPESTAT bits goes to 1, so the PIPExEVENT in * ISR flashes to 1, but the IIR bit doesn't get set to 1 because * IMR masks it. It doesn't ever get set after we clear the masking * in IMR because the ISR bit is edge, not level-triggered, on the * OR of PIPESTAT bits. */ i915_enable_irq(dev_priv, interrupt); pipestat = I915_READ(pipestat_reg); if (IS_I965G(dev)) pipestat |= PIPE_START_VBLANK_INTERRUPT_ENABLE; else pipestat |= PIPE_VBLANK_INTERRUPT_ENABLE; /* Clear any stale interrupt status */ pipestat |= (PIPE_START_VBLANK_INTERRUPT_STATUS | PIPE_VBLANK_INTERRUPT_STATUS); I915_WRITE(pipestat_reg, pipestat); (void) I915_READ(pipestat_reg); /* Posting read */ spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags); return 0; } /* Called from drm generic code, passed 'crtc' which * we use as a pipe index */ void i915_disable_vblank(struct drm_device *dev, int pipe) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; u32 pipestat_reg = 0; u32 pipestat; u32 interrupt = 0; unsigned long irqflags; switch (pipe) { case 0: pipestat_reg = PIPEASTAT; interrupt = I915_DISPLAY_PIPE_A_EVENT_INTERRUPT; break; case 1: pipestat_reg = PIPEBSTAT; interrupt = I915_DISPLAY_PIPE_B_EVENT_INTERRUPT; break; default: DRM_ERROR("tried to disable vblank on non-existent pipe %d\n", pipe); return; break; } spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags); i915_disable_irq(dev_priv, interrupt); pipestat = I915_READ(pipestat_reg); pipestat &= ~(PIPE_START_VBLANK_INTERRUPT_ENABLE | PIPE_VBLANK_INTERRUPT_ENABLE); /* Clear any stale interrupt status */ pipestat |= (PIPE_START_VBLANK_INTERRUPT_STATUS | PIPE_VBLANK_INTERRUPT_STATUS); I915_WRITE(pipestat_reg, pipestat); (void) I915_READ(pipestat_reg); /* Posting read */ spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags); } /* Set the vblank monitor pipe */ int i915_vblank_pipe_set(struct drm_device *dev, void *data, struct drm_file *file_priv) { drm_i915_private_t *dev_priv = dev->dev_private; if (!dev_priv) { DRM_ERROR("called with no initialization\n"); return -EINVAL; } return 0; } int i915_vblank_pipe_get(struct drm_device *dev, void *data, struct drm_file *file_priv) { drm_i915_private_t *dev_priv = dev->dev_private; drm_i915_vblank_pipe_t *pipe = data; if (!dev_priv) { DRM_ERROR("called with no initialization\n"); return -EINVAL; } pipe->pipe = DRM_I915_VBLANK_PIPE_A | DRM_I915_VBLANK_PIPE_B; return 0; } /** * Schedule buffer swap at given vertical blank. */ int i915_vblank_swap(struct drm_device *dev, void *data, struct drm_file *file_priv) { /* The delayed swap mechanism was fundamentally racy, and has been * removed. The model was that the client requested a delayed flip/swap * from the kernel, then waited for vblank before continuing to perform * rendering. The problem was that the kernel might wake the client * up before it dispatched the vblank swap (since the lock has to be * held while touching the ringbuffer), in which case the client would * clear and start the next frame before the swap occurred, and * flicker would occur in addition to likely missing the vblank. * * In the absence of this ioctl, userland falls back to a correct path * of waiting for a vblank, then dispatching the swap on its own. * Context switching to userland and back is plenty fast enough for * meeting the requirements of vblank swapping. */ return -EINVAL; } /* drm_dma.h hooks */ void i915_driver_irq_preinstall(struct drm_device * dev) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; I915_WRITE(HWSTAM, 0xeffe); I915_WRITE(IMR, 0xffffffff); I915_WRITE(IER, 0x0); } int i915_driver_irq_postinstall(struct drm_device *dev) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; int ret, num_pipes = 2; /* Set initial unmasked IRQs to just the selected vblank pipes. */ dev_priv->irq_mask_reg = ~0; ret = drm_vblank_init(dev, num_pipes); if (ret) return ret; dev_priv->vblank_pipe = DRM_I915_VBLANK_PIPE_A | DRM_I915_VBLANK_PIPE_B; dev_priv->irq_mask_reg &= ~I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT; dev_priv->irq_mask_reg &= ~I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT; dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */ dev_priv->irq_mask_reg &= I915_INTERRUPT_ENABLE_MASK; I915_WRITE(IMR, dev_priv->irq_mask_reg); I915_WRITE(IER, I915_INTERRUPT_ENABLE_MASK); (void) I915_READ(IER); opregion_enable_asle(dev); DRM_INIT_WAITQUEUE(&dev_priv->irq_queue); return 0; } void i915_driver_irq_uninstall(struct drm_device * dev) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; u32 temp; if (!dev_priv) return; dev_priv->vblank_pipe = 0; I915_WRITE(HWSTAM, 0xffffffff); I915_WRITE(IMR, 0xffffffff); I915_WRITE(IER, 0x0); temp = I915_READ(PIPEASTAT); I915_WRITE(PIPEASTAT, temp); temp = I915_READ(PIPEBSTAT); I915_WRITE(PIPEBSTAT, temp); temp = I915_READ(IIR); I915_WRITE(IIR, temp); }