/* socal.h: Definitions for Sparc SUNW,socal (SOC+) Fibre Channel Sbus driver. * * Copyright (C) 1998,1999 Jakub Jelinek (jj@ultra.linux.cz) */ #ifndef __SOCAL_H #define __SOCAL_H #include "fc.h" #include "fcp.h" #include "fcp_impl.h" /* Hardware register offsets and constants first {{{ */ #define CFG 0x00UL #define SAE 0x04UL #define CMD 0x08UL #define IMASK 0x0cUL #define REQP 0x10UL #define RESP 0x14UL /* Config Register */ #define SOCAL_CFG_EXT_RAM_BANK_MASK 0x07000000 #define SOCAL_CFG_EEPROM_BANK_MASK 0x00030000 #define SOCAL_CFG_BURST64_MASK 0x00000700 #define SOCAL_CFG_SBUS_PARITY_TEST 0x00000020 #define SOCAL_CFG_SBUS_PARITY_CHECK 0x00000010 #define SOCAL_CFG_SBUS_ENHANCED 0x00000008 #define SOCAL_CFG_BURST_MASK 0x00000007 /* Bursts */ #define SOCAL_CFG_BURST_4 0x00000000 #define SOCAL_CFG_BURST_8 0x00000003 #define SOCAL_CFG_BURST_16 0x00000004 #define SOCAL_CFG_BURST_32 0x00000005 #define SOCAL_CFG_BURST_64 0x00000006 #define SOCAL_CFG_BURST_128 0x00000007 /* Slave Access Error Register */ #define SOCAL_SAE_ALIGNMENT 0x00000004 #define SOCAL_SAE_UNSUPPORTED 0x00000002 #define SOCAL_SAE_PARITY 0x00000001 /* Command & Status Register */ #define SOCAL_CMD_RSP_QALL 0x000f0000 #define SOCAL_CMD_RSP_Q0 0x00010000 #define SOCAL_CMD_RSP_Q1 0x00020000 #define SOCAL_CMD_RSP_Q2 0x00040000 #define SOCAL_CMD_RSP_Q3 0x00080000 #define SOCAL_CMD_REQ_QALL 0x00000f00 #define SOCAL_CMD_REQ_Q0 0x00000100 #define SOCAL_CMD_REQ_Q1 0x00000200 #define SOCAL_CMD_REQ_Q2 0x00000400 #define SOCAL_CMD_REQ_Q3 0x00000800 #define SOCAL_CMD_SAE 0x00000080 #define SOCAL_CMD_INTR_PENDING 0x00000008 #define SOCAL_CMD_NON_QUEUED 0x00000004 #define SOCAL_CMD_IDLE 0x00000002 #define SOCAL_CMD_SOFT_RESET 0x00000001 /* Interrupt Mask Register */ #define SOCAL_IMASK_RSP_QALL 0x000f0000 #define SOCAL_IMASK_RSP_Q0 0x00010000 #define SOCAL_IMASK_RSP_Q1 0x00020000 #define SOCAL_IMASK_RSP_Q2 0x00040000 #define SOCAL_IMASK_RSP_Q3 0x00080000 #define SOCAL_IMASK_REQ_QALL 0x00000f00 #define SOCAL_IMASK_REQ_Q0 0x00000100 #define SOCAL_IMASK_REQ_Q1 0x00000200 #define SOCAL_IMASK_REQ_Q2 0x00000400 #define SOCAL_IMASK_REQ_Q3 0x00000800 #define SOCAL_IMASK_SAE 0x00000080 #define SOCAL_IMASK_NON_QUEUED 0x00000004 #define SOCAL_INTR(s, cmd) \ (((cmd & SOCAL_CMD_RSP_QALL) | ((~cmd) & SOCAL_CMD_REQ_QALL)) \ & s->imask) #define SOCAL_SETIMASK(s, i) \ do { (s)->imask = (i); \ sbus_writel((i), (s)->regs + IMASK); \ } while (0) #define SOCAL_MAX_EXCHANGES 1024 /* XRAM * * This is a 64KB register area. * From the documentation, it seems like it is finally able to cope * at least with 1,2,4 byte accesses for read and 2,4 byte accesses for write. */ /* Circular Queue */ #define SOCAL_CQ_REQ_OFFSET 0x200 #define SOCAL_CQ_RSP_OFFSET 0x220 typedef struct { u32 address; u8 in; u8 out; u8 last; u8 seqno; } socal_hw_cq; #define SOCAL_PORT_A 0x0000 /* From/To Port A */ #define SOCAL_PORT_B 0x0001 /* From/To Port A */ #define SOCAL_FC_HDR 0x0002 /* Contains FC Header */ #define SOCAL_NORSP 0x0004 /* Don't generate response nor interrupt */ #define SOCAL_NOINT 0x0008 /* Generate response but not interrupt */ #define SOCAL_XFERRDY 0x0010 /* Generate XFERRDY */ #define SOCAL_IGNOREPARAM 0x0020 /* Ignore PARAM field in the FC header */ #define SOCAL_COMPLETE 0x0040 /* Command completed */ #define SOCAL_UNSOLICITED 0x0080 /* For request this is the packet to establish unsolicited pools, */ /* for rsp this is unsolicited packet */ #define SOCAL_STATUS 0x0100 /* State change (on/off line) */ #define SOCAL_RSP_HDR 0x0200 /* Return frame header in any case */ typedef struct { u32 token; u16 flags; u8 class; u8 segcnt; u32 bytecnt; } socal_hdr; typedef struct { u32 base; u32 count; } socal_data; #define SOCAL_CQTYPE_NOP 0x00 #define SOCAL_CQTYPE_OUTBOUND 0x01 #define SOCAL_CQTYPE_INBOUND 0x02 #define SOCAL_CQTYPE_SIMPLE 0x03 #define SOCAL_CQTYPE_IO_WRITE 0x04 #define SOCAL_CQTYPE_IO_READ 0x05 #define SOCAL_CQTYPE_UNSOLICITED 0x06 #define SOCAL_CQTYPE_BYPASS_DEV 0x06 #define SOCAL_CQTYPE_DIAG 0x07 #define SOCAL_CQTYPE_OFFLINE 0x08 #define SOCAL_CQTYPE_ADD_POOL 0x09 #define SOCAL_CQTYPE_DELETE_POOL 0x0a #define SOCAL_CQTYPE_ADD_BUFFER 0x0b #define SOCAL_CQTYPE_ADD_POOL_BUFFER 0x0c #define SOCAL_CQTYPE_REQUEST_ABORT 0x0d #define SOCAL_CQTYPE_REQUEST_LIP 0x0e #define SOCAL_CQTYPE_REPORT_MAP 0x0f #define SOCAL_CQTYPE_RESPONSE 0x10 #define SOCAL_CQTYPE_INLINE 0x20 #define SOCAL_CQFLAGS_CONT 0x01 #define SOCAL_CQFLAGS_FULL 0x02 #define SOCAL_CQFLAGS_BADHDR 0x04 #define SOCAL_CQFLAGS_BADPKT 0x08 typedef struct { socal_hdr shdr; socal_data data[3]; fc_hdr fchdr; u8 count; u8 type; u8 flags; u8 seqno; } socal_req; #define SOCAL_OK 0 #define SOCAL_P_RJT 2 #define SOCAL_F_RJT 3 #define SOCAL_P_BSY 4 #define SOCAL_F_BSY 5 #define SOCAL_ONLINE 0x10 #define SOCAL_OFFLINE 0x11 #define SOCAL_TIMEOUT 0x12 #define SOCAL_OVERRUN 0x13 #define SOCAL_ONLINE_LOOP 0x14 #define SOCAL_OLD_PORT 0x15 #define SOCAL_AL_PORT 0x16 #define SOCAL_UNKOWN_CQ_TYPE 0x20 #define SOCAL_BAD_SEG_CNT 0x21 #define SOCAL_MAX_XCHG_EXCEEDED 0x22 #define SOCAL_BAD_XID 0x23 #define SOCAL_XCHG_BUSY 0x24 #define SOCAL_BAD_POOL_ID 0x25 #define SOCAL_INSUFFICIENT_CQES 0x26 #define SOCAL_ALLOC_FAIL 0x27 #define SOCAL_BAD_SID 0x28 #define SOCAL_NO_SEG_INIT 0x29 #define SOCAL_BAD_DID 0x2a #define SOCAL_ABORTED 0x30 #define SOCAL_ABORT_FAILED 0x31 typedef struct { socal_hdr shdr; u32 status; socal_data data; u8 xxx1[10]; u16 ncmds; fc_hdr fchdr; u8 count; u8 type; u8 flags; u8 seqno; } socal_rsp; typedef struct { socal_hdr shdr; u8 xxx1[48]; u8 count; u8 type; u8 flags; u8 seqno; } socal_cmdonly; #define SOCAL_DIAG_NOP 0x00 #define SOCAL_DIAG_INT_LOOP 0x01 #define SOCAL_DIAG_EXT_LOOP 0x02 #define SOCAL_DIAG_REM_LOOP 0x03 #define SOCAL_DIAG_XRAM_TEST 0x04 #define SOCAL_DIAG_SOC_TEST 0x05 #define SOCAL_DIAG_HCB_TEST 0x06 #define SOCAL_DIAG_SOCLB_TEST 0x07 #define SOCAL_DIAG_SRDSLB_TEST 0x08 #define SOCAL_DIAG_EXTOE_TEST 0x09 typedef struct { socal_hdr shdr; u32 cmd; u8 xxx1[44]; u8 count; u8 type; u8 flags; u8 seqno; } socal_diag_req; #define SOCAL_POOL_MASK_RCTL 0x800000 #define SOCAL_POOL_MASK_DID 0x700000 #define SOCAL_POOL_MASK_SID 0x070000 #define SOCAL_POOL_MASK_TYPE 0x008000 #define SOCAL_POOL_MASK_F_CTL 0x007000 #define SOCAL_POOL_MASK_SEQ_ID 0x000800 #define SOCAL_POOL_MASK_D_CTL 0x000400 #define SOCAL_POOL_MASK_SEQ_CNT 0x000300 #define SOCAL_POOL_MASK_OX_ID 0x0000f0 #define SOCAL_POOL_MASK_PARAM 0x00000f typedef struct { socal_hdr shdr; u32 pool_id; u32 header_mask; u32 buf_size; u32 entries; u8 xxx1[8]; fc_hdr fchdr; u8 count; u8 type; u8 flags; u8 seqno; } socal_pool_req; /* }}} */ /* Now our software structures and constants we use to drive the beast {{{ */ #define SOCAL_CQ_REQ0_SIZE 4 #define SOCAL_CQ_REQ1_SIZE 256 #define SOCAL_CQ_RSP0_SIZE 8 #define SOCAL_CQ_RSP1_SIZE 4 #define SOCAL_CQ_RSP2_SIZE 4 #define SOCAL_SOLICITED_RSP_Q 0 #define SOCAL_SOLICITED_BAD_RSP_Q 1 #define SOCAL_UNSOLICITED_RSP_Q 2 struct socal; typedef struct { /* This must come first */ fc_channel fc; struct socal *s; u16 flags; u16 mask; } socal_port; typedef struct { socal_hw_cq __iomem *hw_cq; /* Related XRAM cq */ socal_req *pool; u8 in; u8 out; u8 last; u8 seqno; } socal_cq; struct socal { spinlock_t lock; socal_port port[2]; /* Every SOCAL has one or two FC ports */ socal_cq req[4]; /* Request CQs */ socal_cq rsp[4]; /* Response CQs */ int socal_no; void __iomem *regs; void __iomem *xram; void __iomem *eeprom; fc_wwn wwn; u32 imask; /* Our copy of regs->imask */ u32 cfg; /* Our copy of regs->cfg */ char serv_params[80]; struct socal *next; int curr_port; /* Which port will have priority to fcp_queue_empty */ socal_req * req_cpu; u32 req_dvma; }; /* }}} */ #endif /* !(__SOCAL_H) */