/* * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, * version 2, as published by the Free Software Foundation. * * This program is distributed in the hope it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ #ifndef __TEGRA_CLK_H #define __TEGRA_CLK_H #include #include /** * struct tegra_clk_sync_source - external clock source from codec * * @hw: handle between common and hardware-specific interfaces * @rate: input frequency from source * @max_rate: max rate allowed */ struct tegra_clk_sync_source { struct clk_hw hw; unsigned long rate; unsigned long max_rate; }; #define to_clk_sync_source(_hw) \ container_of(_hw, struct tegra_clk_sync_source, hw) extern const struct clk_ops tegra_clk_sync_source_ops; extern int *periph_clk_enb_refcnt; struct clk *tegra_clk_register_sync_source(const char *name, unsigned long fixed_rate, unsigned long max_rate); /** * struct tegra_clk_frac_div - fractional divider clock * * @hw: handle between common and hardware-specific interfaces * @reg: register containing divider * @flags: hardware-specific flags * @shift: shift to the divider bit field * @width: width of the divider bit field * @frac_width: width of the fractional bit field * @lock: register lock * * Flags: * TEGRA_DIVIDER_ROUND_UP - This flags indicates to round up the divider value. * TEGRA_DIVIDER_FIXED - Fixed rate PLL dividers has addition override bit, this * flag indicates that this divider is for fixed rate PLL. * TEGRA_DIVIDER_INT - Some modules can not cope with the duty cycle when * fraction bit is set. This flags indicates to calculate divider for which * fracton bit will be zero. * TEGRA_DIVIDER_UART - UART module divider has additional enable bit which is * set when divider value is not 0. This flags indicates that the divider * is for UART module. */ struct tegra_clk_frac_div { struct clk_hw hw; void __iomem *reg; u8 flags; u8 shift; u8 width; u8 frac_width; spinlock_t *lock; }; #define to_clk_frac_div(_hw) container_of(_hw, struct tegra_clk_frac_div, hw) #define TEGRA_DIVIDER_ROUND_UP BIT(0) #define TEGRA_DIVIDER_FIXED BIT(1) #define TEGRA_DIVIDER_INT BIT(2) #define TEGRA_DIVIDER_UART BIT(3) extern const struct clk_ops tegra_clk_frac_div_ops; struct clk *tegra_clk_register_divider(const char *name, const char *parent_name, void __iomem *reg, unsigned long flags, u8 clk_divider_flags, u8 shift, u8 width, u8 frac_width, spinlock_t *lock); struct clk *tegra_clk_register_mc(const char *name, const char *parent_name, void __iomem *reg, spinlock_t *lock); /* * Tegra PLL: * * In general, there are 3 requirements for each PLL * that SW needs to be comply with. * (1) Input frequency range (REF). * (2) Comparison frequency range (CF). CF = REF/DIVM. * (3) VCO frequency range (VCO). VCO = CF * DIVN. * * The final PLL output frequency (FO) = VCO >> DIVP. */ /** * struct tegra_clk_pll_freq_table - PLL frequecy table * * @input_rate: input rate from source * @output_rate: output rate from PLL for the input rate * @n: feedback divider * @m: input divider * @p: post divider * @cpcon: charge pump current */ struct tegra_clk_pll_freq_table { unsigned long input_rate; unsigned long output_rate; u16 n; u16 m; u8 p; u8 cpcon; }; /** * struct pdiv_map - map post divider to hw value * * @pdiv: post divider * @hw_val: value to be written to the PLL hw */ struct pdiv_map { u8 pdiv; u8 hw_val; }; /** * struct div_nmp - offset and width of m,n and p fields * * @divn_shift: shift to the feedback divider bit field * @divn_width: width of the feedback divider bit field * @divm_shift: shift to the input divider bit field * @divm_width: width of the input divider bit field * @divp_shift: shift to the post divider bit field * @divp_width: width of the post divider bit field * @override_divn_shift: shift to the feedback divider bitfield in override reg * @override_divm_shift: shift to the input divider bitfield in override reg * @override_divp_shift: shift to the post divider bitfield in override reg */ struct div_nmp { u8 divn_shift; u8 divn_width; u8 divm_shift; u8 divm_width; u8 divp_shift; u8 divp_width; u8 override_divn_shift; u8 override_divm_shift; u8 override_divp_shift; }; /** * struct clk_pll_params - PLL parameters * * @input_min: Minimum input frequency * @input_max: Maximum input frequency * @cf_min: Minimum comparison frequency * @cf_max: Maximum comparison frequency * @vco_min: Minimum VCO frequency * @vco_max: Maximum VCO frequency * @base_reg: PLL base reg offset * @misc_reg: PLL misc reg offset * @lock_reg: PLL lock reg offset * @lock_bit_idx: Bit index for PLL lock status * @lock_enable_bit_idx: Bit index to enable PLL lock * @lock_delay: Delay in us if PLL lock is not used */ struct tegra_clk_pll_params { unsigned long input_min; unsigned long input_max; unsigned long cf_min; unsigned long cf_max; unsigned long vco_min; unsigned long vco_max; u32 base_reg; u32 misc_reg; u32 lock_reg; u32 lock_mask; u32 lock_enable_bit_idx; u32 iddq_reg; u32 iddq_bit_idx; u32 aux_reg; u32 dyn_ramp_reg; u32 ext_misc_reg[3]; u32 pmc_divnm_reg; u32 pmc_divp_reg; u32 flags; int stepa_shift; int stepb_shift; int lock_delay; int max_p; struct pdiv_map *pdiv_tohw; struct div_nmp *div_nmp; struct tegra_clk_pll_freq_table *freq_table; unsigned long fixed_rate; }; /** * struct tegra_clk_pll - Tegra PLL clock * * @hw: handle between common and hardware-specifix interfaces * @clk_base: address of CAR controller * @pmc: address of PMC, required to read override bits * @freq_table: array of frequencies supported by PLL * @params: PLL parameters * @flags: PLL flags * @fixed_rate: PLL rate if it is fixed * @lock: register lock * * Flags: * TEGRA_PLL_USE_LOCK - This flag indicated to use lock bits for * PLL locking. If not set it will use lock_delay value to wait. * TEGRA_PLL_HAS_CPCON - This flag indicates that CPCON value needs * to be programmed to change output frequency of the PLL. * TEGRA_PLL_SET_LFCON - This flag indicates that LFCON value needs * to be programmed to change output frequency of the PLL. * TEGRA_PLL_SET_DCCON - This flag indicates that DCCON value needs * to be programmed to change output frequency of the PLL. * TEGRA_PLLU - PLLU has inverted post divider. This flags indicated * that it is PLLU and invert post divider value. * TEGRA_PLLM - PLLM has additional override settings in PMC. This * flag indicates that it is PLLM and use override settings. * TEGRA_PLL_FIXED - We are not supposed to change output frequency * of some plls. * TEGRA_PLLE_CONFIGURE - Configure PLLE when enabling. * TEGRA_PLL_LOCK_MISC - Lock bit is in the misc register instead of the * base register. * TEGRA_PLL_BYPASS - PLL has bypass bit * TEGRA_PLL_HAS_LOCK_ENABLE - PLL has bit to enable lock monitoring */ struct tegra_clk_pll { struct clk_hw hw; void __iomem *clk_base; void __iomem *pmc; spinlock_t *lock; struct tegra_clk_pll_params *params; }; #define to_clk_pll(_hw) container_of(_hw, struct tegra_clk_pll, hw) #define TEGRA_PLL_USE_LOCK BIT(0) #define TEGRA_PLL_HAS_CPCON BIT(1) #define TEGRA_PLL_SET_LFCON BIT(2) #define TEGRA_PLL_SET_DCCON BIT(3) #define TEGRA_PLLU BIT(4) #define TEGRA_PLLM BIT(5) #define TEGRA_PLL_FIXED BIT(6) #define TEGRA_PLLE_CONFIGURE BIT(7) #define TEGRA_PLL_LOCK_MISC BIT(8) #define TEGRA_PLL_BYPASS BIT(9) #define TEGRA_PLL_HAS_LOCK_ENABLE BIT(10) extern const struct clk_ops tegra_clk_pll_ops; extern const struct clk_ops tegra_clk_plle_ops; struct clk *tegra_clk_register_pll(const char *name, const char *parent_name, void __iomem *clk_base, void __iomem *pmc, unsigned long flags, struct tegra_clk_pll_params *pll_params, spinlock_t *lock); struct clk *tegra_clk_register_plle(const char *name, const char *parent_name, void __iomem *clk_base, void __iomem *pmc, unsigned long flags, struct tegra_clk_pll_params *pll_params, spinlock_t *lock); struct clk *tegra_clk_register_pllxc(const char *name, const char *parent_name, void __iomem *clk_base, void __iomem *pmc, unsigned long flags, struct tegra_clk_pll_params *pll_params, spinlock_t *lock); struct clk *tegra_clk_register_pllm(const char *name, const char *parent_name, void __iomem *clk_base, void __iomem *pmc, unsigned long flags, struct tegra_clk_pll_params *pll_params, spinlock_t *lock); struct clk *tegra_clk_register_pllc(const char *name, const char *parent_name, void __iomem *clk_base, void __iomem *pmc, unsigned long flags, struct tegra_clk_pll_params *pll_params, spinlock_t *lock); struct clk *tegra_clk_register_pllre(const char *name, const char *parent_name, void __iomem *clk_base, void __iomem *pmc, unsigned long flags, struct tegra_clk_pll_params *pll_params, spinlock_t *lock, unsigned long parent_rate); struct clk *tegra_clk_register_plle_tegra114(const char *name, const char *parent_name, void __iomem *clk_base, unsigned long flags, struct tegra_clk_pll_params *pll_params, spinlock_t *lock); struct clk *tegra_clk_register_pllss(const char *name, const char *parent_name, void __iomem *clk_base, unsigned long flags, struct tegra_clk_pll_params *pll_params, spinlock_t *lock); /** * struct tegra_clk_pll_out - PLL divider down clock * * @hw: handle between common and hardware-specific interfaces * @reg: register containing the PLL divider * @enb_bit_idx: bit to enable/disable PLL divider * @rst_bit_idx: bit to reset PLL divider * @lock: register lock * @flags: hardware-specific flags */ struct tegra_clk_pll_out { struct clk_hw hw; void __iomem *reg; u8 enb_bit_idx; u8 rst_bit_idx; spinlock_t *lock; u8 flags; }; #define to_clk_pll_out(_hw) container_of(_hw, struct tegra_clk_pll_out, hw) extern const struct clk_ops tegra_clk_pll_out_ops; struct clk *tegra_clk_register_pll_out(const char *name, const char *parent_name, void __iomem *reg, u8 enb_bit_idx, u8 rst_bit_idx, unsigned long flags, u8 pll_div_flags, spinlock_t *lock); /** * struct tegra_clk_periph_regs - Registers controlling peripheral clock * * @enb_reg: read the enable status * @enb_set_reg: write 1 to enable clock * @enb_clr_reg: write 1 to disable clock * @rst_reg: read the reset status * @rst_set_reg: write 1 to assert the reset of peripheral * @rst_clr_reg: write 1 to deassert the reset of peripheral */ struct tegra_clk_periph_regs { u32 enb_reg; u32 enb_set_reg; u32 enb_clr_reg; u32 rst_reg; u32 rst_set_reg; u32 rst_clr_reg; }; /** * struct tegra_clk_periph_gate - peripheral gate clock * * @magic: magic number to validate type * @hw: handle between common and hardware-specific interfaces * @clk_base: address of CAR controller * @regs: Registers to control the peripheral * @flags: hardware-specific flags * @clk_num: Clock number * @enable_refcnt: array to maintain reference count of the clock * * Flags: * TEGRA_PERIPH_NO_RESET - This flag indicates that reset is not allowed * for this module. * TEGRA_PERIPH_MANUAL_RESET - This flag indicates not to reset module * after clock enable and driver for the module is responsible for * doing reset. * TEGRA_PERIPH_ON_APB - If peripheral is in the APB bus then read the * bus to flush the write operation in apb bus. This flag indicates * that this peripheral is in apb bus. * TEGRA_PERIPH_WAR_1005168 - Apply workaround for Tegra114 MSENC bug */ struct tegra_clk_periph_gate { u32 magic; struct clk_hw hw; void __iomem *clk_base; u8 flags; int clk_num; int *enable_refcnt; struct tegra_clk_periph_regs *regs; }; #define to_clk_periph_gate(_hw) \ container_of(_hw, struct tegra_clk_periph_gate, hw) #define TEGRA_CLK_PERIPH_GATE_MAGIC 0x17760309 #define TEGRA_PERIPH_NO_RESET BIT(0) #define TEGRA_PERIPH_MANUAL_RESET BIT(1) #define TEGRA_PERIPH_ON_APB BIT(2) #define TEGRA_PERIPH_WAR_1005168 BIT(3) #define TEGRA_PERIPH_NO_DIV BIT(4) #define TEGRA_PERIPH_NO_GATE BIT(5) extern const struct clk_ops tegra_clk_periph_gate_ops; struct clk *tegra_clk_register_periph_gate(const char *name, const char *parent_name, u8 gate_flags, void __iomem *clk_base, unsigned long flags, int clk_num, int *enable_refcnt); /** * struct clk-periph - peripheral clock * * @magic: magic number to validate type * @hw: handle between common and hardware-specific interfaces * @mux: mux clock * @divider: divider clock * @gate: gate clock * @mux_ops: mux clock ops * @div_ops: divider clock ops * @gate_ops: gate clock ops */ struct tegra_clk_periph { u32 magic; struct clk_hw hw; struct clk_mux mux; struct tegra_clk_frac_div divider; struct tegra_clk_periph_gate gate; const struct clk_ops *mux_ops; const struct clk_ops *div_ops; const struct clk_ops *gate_ops; }; #define to_clk_periph(_hw) container_of(_hw, struct tegra_clk_periph, hw) #define TEGRA_CLK_PERIPH_MAGIC 0x18221223 extern const struct clk_ops tegra_clk_periph_ops; struct clk *tegra_clk_register_periph(const char *name, const char **parent_names, int num_parents, struct tegra_clk_periph *periph, void __iomem *clk_base, u32 offset, unsigned long flags); struct clk *tegra_clk_register_periph_nodiv(const char *name, const char **parent_names, int num_parents, struct tegra_clk_periph *periph, void __iomem *clk_base, u32 offset); #define TEGRA_CLK_PERIPH(_mux_shift, _mux_mask, _mux_flags, \ _div_shift, _div_width, _div_frac_width, \ _div_flags, _clk_num,\ _gate_flags, _table, _lock) \ { \ .mux = { \ .flags = _mux_flags, \ .shift = _mux_shift, \ .mask = _mux_mask, \ .table = _table, \ .lock = _lock, \ }, \ .divider = { \ .flags = _div_flags, \ .shift = _div_shift, \ .width = _div_width, \ .frac_width = _div_frac_width, \ .lock = _lock, \ }, \ .gate = { \ .flags = _gate_flags, \ .clk_num = _clk_num, \ }, \ .mux_ops = &clk_mux_ops, \ .div_ops = &tegra_clk_frac_div_ops, \ .gate_ops = &tegra_clk_periph_gate_ops, \ } struct tegra_periph_init_data { const char *name; int clk_id; union { const char **parent_names; const char *parent_name; } p; int num_parents; struct tegra_clk_periph periph; u32 offset; const char *con_id; const char *dev_id; unsigned long flags; }; #define TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parent_names, _offset,\ _mux_shift, _mux_mask, _mux_flags, _div_shift, \ _div_width, _div_frac_width, _div_flags, \ _clk_num, _gate_flags, _clk_id, _table, \ _flags, _lock) \ { \ .name = _name, \ .clk_id = _clk_id, \ .p.parent_names = _parent_names, \ .num_parents = ARRAY_SIZE(_parent_names), \ .periph = TEGRA_CLK_PERIPH(_mux_shift, _mux_mask, \ _mux_flags, _div_shift, \ _div_width, _div_frac_width, \ _div_flags, _clk_num, \ _gate_flags, _table, _lock), \ .offset = _offset, \ .con_id = _con_id, \ .dev_id = _dev_id, \ .flags = _flags \ } #define TEGRA_INIT_DATA(_name, _con_id, _dev_id, _parent_names, _offset,\ _mux_shift, _mux_width, _mux_flags, _div_shift, \ _div_width, _div_frac_width, _div_flags, \ _clk_num, _gate_flags, _clk_id) \ TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parent_names, _offset,\ _mux_shift, BIT(_mux_width) - 1, _mux_flags, \ _div_shift, _div_width, _div_frac_width, _div_flags, \ _clk_num, _gate_flags, _clk_id,\ NULL, 0, NULL) /** * struct clk_super_mux - super clock * * @hw: handle between common and hardware-specific interfaces * @reg: register controlling multiplexer * @width: width of the multiplexer bit field * @flags: hardware-specific flags * @div2_index: bit controlling divide-by-2 * @pllx_index: PLLX index in the parent list * @lock: register lock * * Flags: * TEGRA_DIVIDER_2 - LP cluster has additional divider. This flag indicates * that this is LP cluster clock. */ struct tegra_clk_super_mux { struct clk_hw hw; void __iomem *reg; u8 width; u8 flags; u8 div2_index; u8 pllx_index; spinlock_t *lock; }; #define to_clk_super_mux(_hw) container_of(_hw, struct tegra_clk_super_mux, hw) #define TEGRA_DIVIDER_2 BIT(0) extern const struct clk_ops tegra_clk_super_ops; struct clk *tegra_clk_register_super_mux(const char *name, const char **parent_names, u8 num_parents, unsigned long flags, void __iomem *reg, u8 clk_super_flags, u8 width, u8 pllx_index, u8 div2_index, spinlock_t *lock); /** * struct clk_init_tabel - clock initialization table * @clk_id: clock id as mentioned in device tree bindings * @parent_id: parent clock id as mentioned in device tree bindings * @rate: rate to set * @state: enable/disable */ struct tegra_clk_init_table { unsigned int clk_id; unsigned int parent_id; unsigned long rate; int state; }; /** * struct clk_duplicate - duplicate clocks * @clk_id: clock id as mentioned in device tree bindings * @lookup: duplicate lookup entry for the clock */ struct tegra_clk_duplicate { int clk_id; struct clk_lookup lookup; }; #define TEGRA_CLK_DUPLICATE(_clk_id, _dev, _con) \ { \ .clk_id = _clk_id, \ .lookup = { \ .dev_id = _dev, \ .con_id = _con, \ }, \ } struct tegra_clk { int dt_id; bool present; }; struct tegra_devclk { int dt_id; char *dev_id; char *con_id; }; void tegra_init_from_table(struct tegra_clk_init_table *tbl, struct clk *clks[], int clk_max); void tegra_init_dup_clks(struct tegra_clk_duplicate *dup_list, struct clk *clks[], int clk_max); struct tegra_clk_periph_regs *get_reg_bank(int clkid); struct clk **tegra_clk_init(void __iomem *clk_base, int num, int periph_banks); struct clk **tegra_lookup_dt_id(int clk_id, struct tegra_clk *tegra_clk); void tegra_add_of_provider(struct device_node *np); void tegra_register_devclks(struct tegra_devclk *dev_clks, int num); void tegra_audio_clk_init(void __iomem *clk_base, void __iomem *pmc_base, struct tegra_clk *tegra_clks, struct tegra_clk_pll_params *pll_params); void tegra_periph_clk_init(void __iomem *clk_base, void __iomem *pmc_base, struct tegra_clk *tegra_clks, struct tegra_clk_pll_params *pll_params); void tegra_pmc_clk_init(void __iomem *pmc_base, struct tegra_clk *tegra_clks); void tegra_fixed_clk_init(struct tegra_clk *tegra_clks); int tegra_osc_clk_init(void __iomem *clk_base, struct tegra_clk *tegra_clks, unsigned long *input_freqs, int num, unsigned long *osc_freq, unsigned long *pll_ref_freq); void tegra_super_clk_gen4_init(void __iomem *clk_base, void __iomem *pmc_base, struct tegra_clk *tegra_clks, struct tegra_clk_pll_params *pll_params); void tegra114_clock_tune_cpu_trimmers_high(void); void tegra114_clock_tune_cpu_trimmers_low(void); void tegra114_clock_tune_cpu_trimmers_init(void); void tegra114_clock_assert_dfll_dvco_reset(void); void tegra114_clock_deassert_dfll_dvco_reset(void); typedef void (*tegra_clk_apply_init_table_func)(void); extern tegra_clk_apply_init_table_func tegra_clk_apply_init_table; #endif /* TEGRA_CLK_H */