/* ** ----------------------------------------------------------------------------- ** ** Perle Specialix driver for Linux ** Ported from existing RIO Driver for SCO sources. * * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. ** ** Module : daemon.h ** SID : 1.3 ** Last Modified : 11/6/98 11:34:09 ** Retrieved : 11/6/98 11:34:21 ** ** ident @(#)daemon.h 1.3 ** ** ----------------------------------------------------------------------------- */ #ifndef __rio_daemon_h__ #define __rio_daemon_h__ #ifdef SCCS_LABELS #ifndef lint static char *_daemon_h_sccs_ = "@(#)daemon.h 1.3"; #endif #endif /* ** structures used on /dev/rio */ struct Error { unsigned int Error; unsigned int Entry; unsigned int Other; }; struct DownLoad { char *DataP; unsigned int Count; unsigned int ProductCode; }; /* ** A few constants.... */ #ifndef MAX_VERSION_LEN #define MAX_VERSION_LEN 256 #endif #ifndef MAX_XP_CTRL_LEN #define MAX_XP_CTRL_LEN 16 /* ALSO IN PORT.H */ #endif struct PortSetup { unsigned int From; /* Set/Clear XP & IXANY Control from this port.... */ unsigned int To; /* .... to this port */ unsigned int XpCps; /* at this speed */ char XpOn[MAX_XP_CTRL_LEN]; /* this is the start string */ char XpOff[MAX_XP_CTRL_LEN]; /* this is the stop string */ u8 IxAny; /* enable/disable IXANY */ u8 IxOn; /* enable/disable IXON */ u8 Lock; /* lock port params */ u8 Store; /* store params across closes */ u8 Drain; /* close only when drained */ }; struct LpbReq { unsigned int Host; unsigned int Link; struct LPB *LpbP; }; struct RupReq { unsigned int HostNum; unsigned int RupNum; struct RUP *RupP; }; struct PortReq { unsigned int SysPort; struct Port *PortP; }; struct StreamInfo { unsigned int SysPort; int RQueue; int WQueue; }; struct HostReq { unsigned int HostNum; struct Host *HostP; }; struct HostDpRam { unsigned int HostNum; struct DpRam *DpRamP; }; struct DebugCtrl { unsigned int SysPort; unsigned int Debug; unsigned int Wait; }; struct MapInfo { unsigned int FirstPort; /* 8 ports, starting from this (tty) number */ unsigned int RtaUnique; /* reside on this RTA (unique number) */ }; struct MapIn { unsigned int NumEntries; /* How many port sets are we mapping? */ struct MapInfo *MapInfoP; /* Pointer to (user space) info */ }; struct SendPack { unsigned int PortNum; unsigned char Len; unsigned char Data[PKT_MAX_DATA_LEN]; }; struct SpecialRupCmd { struct PKT Packet; unsigned short Host; unsigned short RupNum; }; struct IdentifyRta { unsigned long RtaUnique; u8 ID; }; struct KillNeighbour { unsigned long UniqueNum; u8 Link; }; struct rioVersion { char version[MAX_VERSION_LEN]; char relid[MAX_VERSION_LEN]; int buildLevel; char buildDate[MAX_VERSION_LEN]; }; /* ** RIOC commands are for the daemon type operations ** ** 09.12.1998 ARG - ESIL 0776 part fix ** Definition for 'RIOC' also appears in rioioctl.h, so we'd better do a ** #ifndef here first. ** rioioctl.h also now has #define 'RIO_QUICK_CHECK' as this ioctl is now ** allowed to be used by customers. */ #ifndef RIOC #define RIOC ('R'<<8)|('i'<<16)|('o'<<24) #endif /* ** Boot stuff */ #define RIO_GET_TABLE (RIOC | 100) #define RIO_PUT_TABLE (RIOC | 101) #define RIO_ASSIGN_RTA (RIOC | 102) #define RIO_DELETE_RTA (RIOC | 103) #define RIO_HOST_FOAD (RIOC | 104) #define RIO_QUICK_CHECK (RIOC | 105) #define RIO_SIGNALS_ON (RIOC | 106) #define RIO_SIGNALS_OFF (RIOC | 107) #define RIO_CHANGE_NAME (RIOC | 108) #define RIO_DOWNLOAD (RIOC | 109) #define RIO_GET_LOG (RIOC | 110) #define RIO_SETUP_PORTS (RIOC | 111) #define RIO_ALL_MODEM (RIOC | 112) /* ** card state, debug stuff */ #define RIO_NUM_HOSTS (RIOC | 120) #define RIO_HOST_LPB (RIOC | 121) #define RIO_HOST_RUP (RIOC | 122) #define RIO_HOST_PORT (RIOC | 123) #define RIO_PARMS (RIOC | 124) #define RIO_HOST_REQ (RIOC | 125) #define RIO_READ_CONFIG (RIOC | 126) #define RIO_SET_CONFIG (RIOC | 127) #define RIO_VERSID (RIOC | 128) #define RIO_FLAGS (RIOC | 129) #define RIO_SETDEBUG (RIOC | 130) #define RIO_GETDEBUG (RIOC | 131) #define RIO_READ_LEVELS (RIOC | 132) #define RIO_SET_FAST_BUS (RIOC | 133) #define RIO_SET_SLOW_BUS (RIOC | 134) #define RIO_SET_BYTE_MODE (RIOC | 135) #define RIO_SET_WORD_MODE (RIOC | 136) #define RIO_STREAM_INFO (RIOC | 137) #define RIO_START_POLLER (RIOC | 138) #define RIO_STOP_POLLER (RIOC | 139) #define RIO_LAST_ERROR (RIOC | 140) #define RIO_TICK (RIOC | 141) #define RIO_TOCK (RIOC | 241) /* I did this on purpose, you know. */ #define RIO_SEND_PACKET (RIOC | 142) #define RIO_SET_BUSY (RIOC | 143) #define SPECIAL_RUP_CMD (RIOC | 144) #define RIO_FOAD_RTA (RIOC | 145) #define RIO_ZOMBIE_RTA (RIOC | 146) #define RIO_IDENTIFY_RTA (RIOC | 147) #define RIO_KILL_NEIGHBOUR (RIOC | 148) #define RIO_DEBUG_MEM (RIOC | 149) /* ** 150 - 167 used..... See below */ #define RIO_GET_PORT_SETUP (RIOC | 168) #define RIO_RESUME (RIOC | 169) #define RIO_MESG (RIOC | 170) #define RIO_NO_MESG (RIOC | 171) #define RIO_WHAT_MESG (RIOC | 172) #define RIO_HOST_DPRAM (RIOC | 173) #define RIO_MAP_B50_TO_50 (RIOC | 174) #define RIO_MAP_B50_TO_57600 (RIOC | 175) #define RIO_MAP_B110_TO_110 (RIOC | 176) #define RIO_MAP_B110_TO_115200 (RIOC | 177) #define RIO_GET_PORT_PARAMS (RIOC | 178) #define RIO_SET_PORT_PARAMS (RIOC | 179) #define RIO_GET_PORT_TTY (RIOC | 180) #define RIO_SET_PORT_TTY (RIOC | 181) #define RIO_SYSLOG_ONLY (RIOC | 182) #define RIO_SYSLOG_CONS (RIOC | 183) #define RIO_CONS_ONLY (RIOC | 184) #define RIO_BLOCK_OPENS (RIOC | 185) /* ** 02.03.1999 ARG - ESIL 0820 fix : ** RIOBootMode is no longer use by the driver, so these ioctls ** are now obsolete : ** #define RIO_GET_BOOT_MODE (RIOC | 186) #define RIO_SET_BOOT_MODE (RIOC | 187) ** */ #define RIO_MEM_DUMP (RIOC | 189) #define RIO_READ_REGISTER (RIOC | 190) #define RIO_GET_MODTYPE (RIOC | 191) #define RIO_SET_TIMER (RIOC | 192) #define RIO_READ_CHECK (RIOC | 196) #define RIO_WAITING_FOR_RESTART (RIOC | 197) #define RIO_BIND_RTA (RIOC | 198) #define RIO_GET_BINDINGS (RIOC | 199) #define RIO_PUT_BINDINGS (RIOC | 200) #define RIO_MAKE_DEV (RIOC | 201) #define RIO_MINOR (RIOC | 202) #define RIO_IDENTIFY_DRIVER (RIOC | 203) #define RIO_DISPLAY_HOST_CFG (RIOC | 204) /* ** MAKE_DEV / MINOR stuff */ #define RIO_DEV_DIRECT 0x0000 #define RIO_DEV_MODEM 0x0200 #define RIO_DEV_XPRINT 0x0400 #define RIO_DEV_MASK 0x0600 /* ** port management, xprint stuff */ #define rIOCN(N) (RIOC|(N)) #define rIOCR(N,T) (RIOC|(N)) #define rIOCW(N,T) (RIOC|(N)) #define RIO_GET_XP_ON rIOCR(150,char[16]) /* start xprint string */ #define RIO_SET_XP_ON rIOCW(151,char[16]) #define RIO_GET_XP_OFF rIOCR(152,char[16]) /* finish xprint string */ #define RIO_SET_XP_OFF rIOCW(153,char[16]) #define RIO_GET_XP_CPS rIOCR(154,int) /* xprint CPS */ #define RIO_SET_XP_CPS rIOCW(155,int) #define RIO_GET_IXANY rIOCR(156,int) /* ixany allowed? */ #define RIO_SET_IXANY rIOCW(157,int) #define RIO_SET_IXANY_ON rIOCN(158) /* allow ixany */ #define RIO_SET_IXANY_OFF rIOCN(159) /* disallow ixany */ #define RIO_GET_MODEM rIOCR(160,int) /* port is modem/direct line? */ #define RIO_SET_MODEM rIOCW(161,int) #define RIO_SET_MODEM_ON rIOCN(162) /* port is a modem */ #define RIO_SET_MODEM_OFF rIOCN(163) /* port is direct */ #define RIO_GET_IXON rIOCR(164,int) /* ixon allowed? */ #define RIO_SET_IXON rIOCW(165,int) #define RIO_SET_IXON_ON rIOCN(166) /* allow ixon */ #define RIO_SET_IXON_OFF rIOCN(167) /* disallow ixon */ #define RIO_GET_SIVIEW ((('s')<<8) | 106) /* backwards compatible with SI */ #define RIO_IOCTL_UNKNOWN -2 #endif