/* * Generic OPP Interface * * Copyright (C) 2009-2010 Texas Instruments Incorporated. * Nishanth Menon * Romit Dasgupta * Kevin Hilman * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ #include #include #include #include #include #include #include #include #include #include #include /* * Internal data structure organization with the OPP layer library is as * follows: * dev_opp_list (root) * |- device 1 (represents voltage domain 1) * | |- opp 1 (availability, freq, voltage) * | |- opp 2 .. * ... ... * | `- opp n .. * |- device 2 (represents the next voltage domain) * ... * `- device m (represents mth voltage domain) * device 1, 2.. are represented by dev_opp structure while each opp * is represented by the opp structure. */ /** * struct dev_pm_opp - Generic OPP description structure * @node: opp list node. The nodes are maintained throughout the lifetime * of boot. It is expected only an optimal set of OPPs are * added to the library by the SoC framework. * RCU usage: opp list is traversed with RCU locks. node * modification is possible realtime, hence the modifications * are protected by the dev_opp_list_lock for integrity. * IMPORTANT: the opp nodes should be maintained in increasing * order. * @dynamic: not-created from static DT entries. * @available: true/false - marks if this OPP as available or not * @rate: Frequency in hertz * @u_volt: Nominal voltage in microvolts corresponding to this OPP * @dev_opp: points back to the device_opp struct this opp belongs to * @rcu_head: RCU callback head used for deferred freeing * * This structure stores the OPP information for a given device. */ struct dev_pm_opp { struct list_head node; bool available; bool dynamic; unsigned long rate; unsigned long u_volt; struct device_opp *dev_opp; struct rcu_head rcu_head; }; /** * struct device_opp - Device opp structure * @node: list node - contains the devices with OPPs that * have been registered. Nodes once added are not modified in this * list. * RCU usage: nodes are not modified in the list of device_opp, * however addition is possible and is secured by dev_opp_list_lock * @dev: device pointer * @srcu_head: notifier head to notify the OPP availability changes. * @rcu_head: RCU callback head used for deferred freeing * @opp_list: list of opps * * This is an internal data structure maintaining the link to opps attached to * a device. This structure is not meant to be shared to users as it is * meant for book keeping and private to OPP library. * * Because the opp structures can be used from both rcu and srcu readers, we * need to wait for the grace period of both of them before freeing any * resources. And so we have used kfree_rcu() from within call_srcu() handlers. */ struct device_opp { struct list_head node; struct device *dev; struct srcu_notifier_head srcu_head; struct rcu_head rcu_head; struct list_head opp_list; }; /* * The root of the list of all devices. All device_opp structures branch off * from here, with each device_opp containing the list of opp it supports in * various states of availability. */ static LIST_HEAD(dev_opp_list); /* Lock to allow exclusive modification to the device and opp lists */ static DEFINE_MUTEX(dev_opp_list_lock); #define opp_rcu_lockdep_assert() \ do { \ rcu_lockdep_assert(rcu_read_lock_held() || \ lockdep_is_held(&dev_opp_list_lock), \ "Missing rcu_read_lock() or " \ "dev_opp_list_lock protection"); \ } while (0) /** * _find_device_opp() - find device_opp struct using device pointer * @dev: device pointer used to lookup device OPPs * * Search list of device OPPs for one containing matching device. Does a RCU * reader operation to grab the pointer needed. * * Return: pointer to 'struct device_opp' if found, otherwise -ENODEV or * -EINVAL based on type of error. * * Locking: This function must be called under rcu_read_lock(). device_opp * is a RCU protected pointer. This means that device_opp is valid as long * as we are under RCU lock. */ static struct device_opp *_find_device_opp(struct device *dev) { struct device_opp *tmp_dev_opp, *dev_opp = ERR_PTR(-ENODEV); if (unlikely(IS_ERR_OR_NULL(dev))) { pr_err("%s: Invalid parameters\n", __func__); return ERR_PTR(-EINVAL); } list_for_each_entry_rcu(tmp_dev_opp, &dev_opp_list, node) { if (tmp_dev_opp->dev == dev) { dev_opp = tmp_dev_opp; break; } } return dev_opp; } /** * dev_pm_opp_get_voltage() - Gets the voltage corresponding to an available opp * @opp: opp for which voltage has to be returned for * * Return: voltage in micro volt corresponding to the opp, else * return 0 * * Locking: This function must be called under rcu_read_lock(). opp is a rcu * protected pointer. This means that opp which could have been fetched by * opp_find_freq_{exact,ceil,floor} functions is valid as long as we are * under RCU lock. The pointer returned by the opp_find_freq family must be * used in the same section as the usage of this function with the pointer * prior to unlocking with rcu_read_unlock() to maintain the integrity of the * pointer. */ unsigned long dev_pm_opp_get_voltage(struct dev_pm_opp *opp) { struct dev_pm_opp *tmp_opp; unsigned long v = 0; opp_rcu_lockdep_assert(); tmp_opp = rcu_dereference(opp); if (unlikely(IS_ERR_OR_NULL(tmp_opp)) || !tmp_opp->available) pr_err("%s: Invalid parameters\n", __func__); else v = tmp_opp->u_volt; return v; } EXPORT_SYMBOL_GPL(dev_pm_opp_get_voltage); /** * dev_pm_opp_get_freq() - Gets the frequency corresponding to an available opp * @opp: opp for which frequency has to be returned for * * Return: frequency in hertz corresponding to the opp, else * return 0 * * Locking: This function must be called under rcu_read_lock(). opp is a rcu * protected pointer. This means that opp which could have been fetched by * opp_find_freq_{exact,ceil,floor} functions is valid as long as we are * under RCU lock. The pointer returned by the opp_find_freq family must be * used in the same section as the usage of this function with the pointer * prior to unlocking with rcu_read_unlock() to maintain the integrity of the * pointer. */ unsigned long dev_pm_opp_get_freq(struct dev_pm_opp *opp) { struct dev_pm_opp *tmp_opp; unsigned long f = 0; opp_rcu_lockdep_assert(); tmp_opp = rcu_dereference(opp); if (unlikely(IS_ERR_OR_NULL(tmp_opp)) || !tmp_opp->available) pr_err("%s: Invalid parameters\n", __func__); else f = tmp_opp->rate; return f; } EXPORT_SYMBOL_GPL(dev_pm_opp_get_freq); /** * dev_pm_opp_get_opp_count() - Get number of opps available in the opp list * @dev: device for which we do this operation * * Return: This function returns the number of available opps if there are any, * else returns 0 if none or the corresponding error value. * * Locking: This function takes rcu_read_lock(). */ int dev_pm_opp_get_opp_count(struct device *dev) { struct device_opp *dev_opp; struct dev_pm_opp *temp_opp; int count = 0; rcu_read_lock(); dev_opp = _find_device_opp(dev); if (IS_ERR(dev_opp)) { count = PTR_ERR(dev_opp); dev_err(dev, "%s: device OPP not found (%d)\n", __func__, count); goto out_unlock; } list_for_each_entry_rcu(temp_opp, &dev_opp->opp_list, node) { if (temp_opp->available) count++; } out_unlock: rcu_read_unlock(); return count; } EXPORT_SYMBOL_GPL(dev_pm_opp_get_opp_count); /** * dev_pm_opp_find_freq_exact() - search for an exact frequency * @dev: device for which we do this operation * @freq: frequency to search for * @available: true/false - match for available opp * * Return: Searches for exact match in the opp list and returns pointer to the * matching opp if found, else returns ERR_PTR in case of error and should * be handled using IS_ERR. Error return values can be: * EINVAL: for bad pointer * ERANGE: no match found for search * ENODEV: if device not found in list of registered devices * * Note: available is a modifier for the search. if available=true, then the * match is for exact matching frequency and is available in the stored OPP * table. if false, the match is for exact frequency which is not available. * * This provides a mechanism to enable an opp which is not available currently * or the opposite as well. * * Locking: This function must be called under rcu_read_lock(). opp is a rcu * protected pointer. The reason for the same is that the opp pointer which is * returned will remain valid for use with opp_get_{voltage, freq} only while * under the locked area. The pointer returned must be used prior to unlocking * with rcu_read_unlock() to maintain the integrity of the pointer. */ struct dev_pm_opp *dev_pm_opp_find_freq_exact(struct device *dev, unsigned long freq, bool available) { struct device_opp *dev_opp; struct dev_pm_opp *temp_opp, *opp = ERR_PTR(-ERANGE); opp_rcu_lockdep_assert(); dev_opp = _find_device_opp(dev); if (IS_ERR(dev_opp)) { int r = PTR_ERR(dev_opp); dev_err(dev, "%s: device OPP not found (%d)\n", __func__, r); return ERR_PTR(r); } list_for_each_entry_rcu(temp_opp, &dev_opp->opp_list, node) { if (temp_opp->available == available && temp_opp->rate == freq) { opp = temp_opp; break; } } return opp; } EXPORT_SYMBOL_GPL(dev_pm_opp_find_freq_exact); /** * dev_pm_opp_find_freq_ceil() - Search for an rounded ceil freq * @dev: device for which we do this operation * @freq: Start frequency * * Search for the matching ceil *available* OPP from a starting freq * for a device. * * Return: matching *opp and refreshes *freq accordingly, else returns * ERR_PTR in case of error and should be handled using IS_ERR. Error return * values can be: * EINVAL: for bad pointer * ERANGE: no match found for search * ENODEV: if device not found in list of registered devices * * Locking: This function must be called under rcu_read_lock(). opp is a rcu * protected pointer. The reason for the same is that the opp pointer which is * returned will remain valid for use with opp_get_{voltage, freq} only while * under the locked area. The pointer returned must be used prior to unlocking * with rcu_read_unlock() to maintain the integrity of the pointer. */ struct dev_pm_opp *dev_pm_opp_find_freq_ceil(struct device *dev, unsigned long *freq) { struct device_opp *dev_opp; struct dev_pm_opp *temp_opp, *opp = ERR_PTR(-ERANGE); opp_rcu_lockdep_assert(); if (!dev || !freq) { dev_err(dev, "%s: Invalid argument freq=%p\n", __func__, freq); return ERR_PTR(-EINVAL); } dev_opp = _find_device_opp(dev); if (IS_ERR(dev_opp)) return ERR_CAST(dev_opp); list_for_each_entry_rcu(temp_opp, &dev_opp->opp_list, node) { if (temp_opp->available && temp_opp->rate >= *freq) { opp = temp_opp; *freq = opp->rate; break; } } return opp; } EXPORT_SYMBOL_GPL(dev_pm_opp_find_freq_ceil); /** * dev_pm_opp_find_freq_floor() - Search for a rounded floor freq * @dev: device for which we do this operation * @freq: Start frequency * * Search for the matching floor *available* OPP from a starting freq * for a device. * * Return: matching *opp and refreshes *freq accordingly, else returns * ERR_PTR in case of error and should be handled using IS_ERR. Error return * values can be: * EINVAL: for bad pointer * ERANGE: no match found for search * ENODEV: if device not found in list of registered devices * * Locking: This function must be called under rcu_read_lock(). opp is a rcu * protected pointer. The reason for the same is that the opp pointer which is * returned will remain valid for use with opp_get_{voltage, freq} only while * under the locked area. The pointer returned must be used prior to unlocking * with rcu_read_unlock() to maintain the integrity of the pointer. */ struct dev_pm_opp *dev_pm_opp_find_freq_floor(struct device *dev, unsigned long *freq) { struct device_opp *dev_opp; struct dev_pm_opp *temp_opp, *opp = ERR_PTR(-ERANGE); opp_rcu_lockdep_assert(); if (!dev || !freq) { dev_err(dev, "%s: Invalid argument freq=%p\n", __func__, freq); return ERR_PTR(-EINVAL); } dev_opp = _find_device_opp(dev); if (IS_ERR(dev_opp)) return ERR_CAST(dev_opp); list_for_each_entry_rcu(temp_opp, &dev_opp->opp_list, node) { if (temp_opp->available) { /* go to the next node, before choosing prev */ if (temp_opp->rate > *freq) break; else opp = temp_opp; } } if (!IS_ERR(opp)) *freq = opp->rate; return opp; } EXPORT_SYMBOL_GPL(dev_pm_opp_find_freq_floor); /** * _add_device_opp() - Allocate a new device OPP table * @dev: device for which we do this operation * * New device node which uses OPPs - used when multiple devices with OPP tables * are maintained. * * Return: valid device_opp pointer if success, else NULL. */ static struct device_opp *_add_device_opp(struct device *dev) { struct device_opp *dev_opp; /* * Allocate a new device OPP table. In the infrequent case where a new * device is needed to be added, we pay this penalty. */ dev_opp = kzalloc(sizeof(*dev_opp), GFP_KERNEL); if (!dev_opp) return NULL; dev_opp->dev = dev; srcu_init_notifier_head(&dev_opp->srcu_head); INIT_LIST_HEAD(&dev_opp->opp_list); /* Secure the device list modification */ list_add_rcu(&dev_opp->node, &dev_opp_list); return dev_opp; } /** * _opp_add_dynamic() - Allocate a dynamic OPP. * @dev: device for which we do this operation * @freq: Frequency in Hz for this OPP * @u_volt: Voltage in uVolts for this OPP * @dynamic: Dynamically added OPPs. * * This function adds an opp definition to the opp list and returns status. * The opp is made available by default and it can be controlled using * dev_pm_opp_enable/disable functions and may be removed by dev_pm_opp_remove. * * NOTE: "dynamic" parameter impacts OPPs added by the of_init_opp_table and * freed by of_free_opp_table. * * Locking: The internal device_opp and opp structures are RCU protected. * Hence this function internally uses RCU updater strategy with mutex locks * to keep the integrity of the internal data structures. Callers should ensure * that this function is *NOT* called under RCU protection or in contexts where * mutex cannot be locked. * * Return: * 0 On success OR * Duplicate OPPs (both freq and volt are same) and opp->available * -EEXIST Freq are same and volt are different OR * Duplicate OPPs (both freq and volt are same) and !opp->available * -ENOMEM Memory allocation failure */ static int _opp_add_dynamic(struct device *dev, unsigned long freq, long u_volt, bool dynamic) { struct device_opp *dev_opp = NULL; struct dev_pm_opp *opp, *new_opp; struct list_head *head; int ret; /* allocate new OPP node */ new_opp = kzalloc(sizeof(*new_opp), GFP_KERNEL); if (!new_opp) return -ENOMEM; /* Hold our list modification lock here */ mutex_lock(&dev_opp_list_lock); /* populate the opp table */ new_opp->rate = freq; new_opp->u_volt = u_volt; new_opp->available = true; new_opp->dynamic = dynamic; /* Check for existing list for 'dev' */ dev_opp = _find_device_opp(dev); if (IS_ERR(dev_opp)) { dev_opp = _add_device_opp(dev); if (!dev_opp) { ret = -ENOMEM; goto free_opp; } head = &dev_opp->opp_list; goto list_add; } /* * Insert new OPP in order of increasing frequency * and discard if already present */ head = &dev_opp->opp_list; list_for_each_entry_rcu(opp, &dev_opp->opp_list, node) { if (new_opp->rate <= opp->rate) break; else head = &opp->node; } /* Duplicate OPPs ? */ if (new_opp->rate == opp->rate) { ret = opp->available && new_opp->u_volt == opp->u_volt ? 0 : -EEXIST; dev_warn(dev, "%s: duplicate OPPs detected. Existing: freq: %lu, volt: %lu, enabled: %d. New: freq: %lu, volt: %lu, enabled: %d\n", __func__, opp->rate, opp->u_volt, opp->available, new_opp->rate, new_opp->u_volt, new_opp->available); goto free_opp; } list_add: new_opp->dev_opp = dev_opp; list_add_rcu(&new_opp->node, head); mutex_unlock(&dev_opp_list_lock); /* * Notify the changes in the availability of the operable * frequency/voltage list. */ srcu_notifier_call_chain(&dev_opp->srcu_head, OPP_EVENT_ADD, new_opp); return 0; free_opp: mutex_unlock(&dev_opp_list_lock); kfree(new_opp); return ret; } /** * dev_pm_opp_add() - Add an OPP table from a table definitions * @dev: device for which we do this operation * @freq: Frequency in Hz for this OPP * @u_volt: Voltage in uVolts for this OPP * * This function adds an opp definition to the opp list and returns status. * The opp is made available by default and it can be controlled using * dev_pm_opp_enable/disable functions. * * Locking: The internal device_opp and opp structures are RCU protected. * Hence this function internally uses RCU updater strategy with mutex locks * to keep the integrity of the internal data structures. Callers should ensure * that this function is *NOT* called under RCU protection or in contexts where * mutex cannot be locked. * * Return: * 0 On success OR * Duplicate OPPs (both freq and volt are same) and opp->available * -EEXIST Freq are same and volt are different OR * Duplicate OPPs (both freq and volt are same) and !opp->available * -ENOMEM Memory allocation failure */ int dev_pm_opp_add(struct device *dev, unsigned long freq, unsigned long u_volt) { return _opp_add_dynamic(dev, freq, u_volt, true); } EXPORT_SYMBOL_GPL(dev_pm_opp_add); /** * _kfree_opp_rcu() - Free OPP RCU handler * @head: RCU head */ static void _kfree_opp_rcu(struct rcu_head *head) { struct dev_pm_opp *opp = container_of(head, struct dev_pm_opp, rcu_head); kfree_rcu(opp, rcu_head); } /** * _kfree_device_rcu() - Free device_opp RCU handler * @head: RCU head */ static void _kfree_device_rcu(struct rcu_head *head) { struct device_opp *device_opp = container_of(head, struct device_opp, rcu_head); kfree_rcu(device_opp, rcu_head); } /** * _opp_remove() - Remove an OPP from a table definition * @dev_opp: points back to the device_opp struct this opp belongs to * @opp: pointer to the OPP to remove * * This function removes an opp definition from the opp list. * * Locking: The internal device_opp and opp structures are RCU protected. * It is assumed that the caller holds required mutex for an RCU updater * strategy. */ static void _opp_remove(struct device_opp *dev_opp, struct dev_pm_opp *opp) { /* * Notify the changes in the availability of the operable * frequency/voltage list. */ srcu_notifier_call_chain(&dev_opp->srcu_head, OPP_EVENT_REMOVE, opp); list_del_rcu(&opp->node); call_srcu(&dev_opp->srcu_head.srcu, &opp->rcu_head, _kfree_opp_rcu); if (list_empty(&dev_opp->opp_list)) { list_del_rcu(&dev_opp->node); call_srcu(&dev_opp->srcu_head.srcu, &dev_opp->rcu_head, _kfree_device_rcu); } } /** * dev_pm_opp_remove() - Remove an OPP from OPP list * @dev: device for which we do this operation * @freq: OPP to remove with matching 'freq' * * This function removes an opp from the opp list. * * Locking: The internal device_opp and opp structures are RCU protected. * Hence this function internally uses RCU updater strategy with mutex locks * to keep the integrity of the internal data structures. Callers should ensure * that this function is *NOT* called under RCU protection or in contexts where * mutex cannot be locked. */ void dev_pm_opp_remove(struct device *dev, unsigned long freq) { struct dev_pm_opp *opp; struct device_opp *dev_opp; bool found = false; /* Hold our list modification lock here */ mutex_lock(&dev_opp_list_lock); dev_opp = _find_device_opp(dev); if (IS_ERR(dev_opp)) goto unlock; list_for_each_entry(opp, &dev_opp->opp_list, node) { if (opp->rate == freq) { found = true; break; } } if (!found) { dev_warn(dev, "%s: Couldn't find OPP with freq: %lu\n", __func__, freq); goto unlock; } _opp_remove(dev_opp, opp); unlock: mutex_unlock(&dev_opp_list_lock); } EXPORT_SYMBOL_GPL(dev_pm_opp_remove); /** * _opp_set_availability() - helper to set the availability of an opp * @dev: device for which we do this operation * @freq: OPP frequency to modify availability * @availability_req: availability status requested for this opp * * Set the availability of an OPP with an RCU operation, opp_{enable,disable} * share a common logic which is isolated here. * * Return: -EINVAL for bad pointers, -ENOMEM if no memory available for the * copy operation, returns 0 if no modifcation was done OR modification was * successful. * * Locking: The internal device_opp and opp structures are RCU protected. * Hence this function internally uses RCU updater strategy with mutex locks to * keep the integrity of the internal data structures. Callers should ensure * that this function is *NOT* called under RCU protection or in contexts where * mutex locking or synchronize_rcu() blocking calls cannot be used. */ static int _opp_set_availability(struct device *dev, unsigned long freq, bool availability_req) { struct device_opp *dev_opp; struct dev_pm_opp *new_opp, *tmp_opp, *opp = ERR_PTR(-ENODEV); int r = 0; /* keep the node allocated */ new_opp = kmalloc(sizeof(*new_opp), GFP_KERNEL); if (!new_opp) return -ENOMEM; mutex_lock(&dev_opp_list_lock); /* Find the device_opp */ dev_opp = _find_device_opp(dev); if (IS_ERR(dev_opp)) { r = PTR_ERR(dev_opp); dev_warn(dev, "%s: Device OPP not found (%d)\n", __func__, r); goto unlock; } /* Do we have the frequency? */ list_for_each_entry(tmp_opp, &dev_opp->opp_list, node) { if (tmp_opp->rate == freq) { opp = tmp_opp; break; } } if (IS_ERR(opp)) { r = PTR_ERR(opp); goto unlock; } /* Is update really needed? */ if (opp->available == availability_req) goto unlock; /* copy the old data over */ *new_opp = *opp; /* plug in new node */ new_opp->available = availability_req; list_replace_rcu(&opp->node, &new_opp->node); mutex_unlock(&dev_opp_list_lock); call_srcu(&dev_opp->srcu_head.srcu, &opp->rcu_head, _kfree_opp_rcu); /* Notify the change of the OPP availability */ if (availability_req) srcu_notifier_call_chain(&dev_opp->srcu_head, OPP_EVENT_ENABLE, new_opp); else srcu_notifier_call_chain(&dev_opp->srcu_head, OPP_EVENT_DISABLE, new_opp); return 0; unlock: mutex_unlock(&dev_opp_list_lock); kfree(new_opp); return r; } /** * dev_pm_opp_enable() - Enable a specific OPP * @dev: device for which we do this operation * @freq: OPP frequency to enable * * Enables a provided opp. If the operation is valid, this returns 0, else the * corresponding error value. It is meant to be used for users an OPP available * after being temporarily made unavailable with dev_pm_opp_disable. * * Locking: The internal device_opp and opp structures are RCU protected. * Hence this function indirectly uses RCU and mutex locks to keep the * integrity of the internal data structures. Callers should ensure that * this function is *NOT* called under RCU protection or in contexts where * mutex locking or synchronize_rcu() blocking calls cannot be used. * * Return: -EINVAL for bad pointers, -ENOMEM if no memory available for the * copy operation, returns 0 if no modifcation was done OR modification was * successful. */ int dev_pm_opp_enable(struct device *dev, unsigned long freq) { return _opp_set_availability(dev, freq, true); } EXPORT_SYMBOL_GPL(dev_pm_opp_enable); /** * dev_pm_opp_disable() - Disable a specific OPP * @dev: device for which we do this operation * @freq: OPP frequency to disable * * Disables a provided opp. If the operation is valid, this returns * 0, else the corresponding error value. It is meant to be a temporary * control by users to make this OPP not available until the circumstances are * right to make it available again (with a call to dev_pm_opp_enable). * * Locking: The internal device_opp and opp structures are RCU protected. * Hence this function indirectly uses RCU and mutex locks to keep the * integrity of the internal data structures. Callers should ensure that * this function is *NOT* called under RCU protection or in contexts where * mutex locking or synchronize_rcu() blocking calls cannot be used. * * Return: -EINVAL for bad pointers, -ENOMEM if no memory available for the * copy operation, returns 0 if no modifcation was done OR modification was * successful. */ int dev_pm_opp_disable(struct device *dev, unsigned long freq) { return _opp_set_availability(dev, freq, false); } EXPORT_SYMBOL_GPL(dev_pm_opp_disable); /** * dev_pm_opp_get_notifier() - find notifier_head of the device with opp * @dev: device pointer used to lookup device OPPs. * * Return: pointer to notifier head if found, otherwise -ENODEV or * -EINVAL based on type of error casted as pointer. value must be checked * with IS_ERR to determine valid pointer or error result. * * Locking: This function must be called under rcu_read_lock(). dev_opp is a RCU * protected pointer. The reason for the same is that the opp pointer which is * returned will remain valid for use with opp_get_{voltage, freq} only while * under the locked area. The pointer returned must be used prior to unlocking * with rcu_read_unlock() to maintain the integrity of the pointer. */ struct srcu_notifier_head *dev_pm_opp_get_notifier(struct device *dev) { struct device_opp *dev_opp = _find_device_opp(dev); if (IS_ERR(dev_opp)) return ERR_CAST(dev_opp); /* matching type */ return &dev_opp->srcu_head; } EXPORT_SYMBOL_GPL(dev_pm_opp_get_notifier); #ifdef CONFIG_OF /** * of_init_opp_table() - Initialize opp table from device tree * @dev: device pointer used to lookup device OPPs. * * Register the initial OPP table with the OPP library for given device. * * Locking: The internal device_opp and opp structures are RCU protected. * Hence this function indirectly uses RCU updater strategy with mutex locks * to keep the integrity of the internal data structures. Callers should ensure * that this function is *NOT* called under RCU protection or in contexts where * mutex cannot be locked. * * Return: * 0 On success OR * Duplicate OPPs (both freq and volt are same) and opp->available * -EEXIST Freq are same and volt are different OR * Duplicate OPPs (both freq and volt are same) and !opp->available * -ENOMEM Memory allocation failure * -ENODEV when 'operating-points' property is not found or is invalid data * in device node. * -ENODATA when empty 'operating-points' property is found */ int of_init_opp_table(struct device *dev) { const struct property *prop; const __be32 *val; int nr; prop = of_find_property(dev->of_node, "operating-points", NULL); if (!prop) return -ENODEV; if (!prop->value) return -ENODATA; /* * Each OPP is a set of tuples consisting of frequency and * voltage like . */ nr = prop->length / sizeof(u32); if (nr % 2) { dev_err(dev, "%s: Invalid OPP list\n", __func__); return -EINVAL; } val = prop->value; while (nr) { unsigned long freq = be32_to_cpup(val++) * 1000; unsigned long volt = be32_to_cpup(val++); if (_opp_add_dynamic(dev, freq, volt, false)) dev_warn(dev, "%s: Failed to add OPP %ld\n", __func__, freq); nr -= 2; } return 0; } EXPORT_SYMBOL_GPL(of_init_opp_table); /** * of_free_opp_table() - Free OPP table entries created from static DT entries * @dev: device pointer used to lookup device OPPs. * * Free OPPs created using static entries present in DT. * * Locking: The internal device_opp and opp structures are RCU protected. * Hence this function indirectly uses RCU updater strategy with mutex locks * to keep the integrity of the internal data structures. Callers should ensure * that this function is *NOT* called under RCU protection or in contexts where * mutex cannot be locked. */ void of_free_opp_table(struct device *dev) { struct device_opp *dev_opp; struct dev_pm_opp *opp, *tmp; /* Check for existing list for 'dev' */ dev_opp = _find_device_opp(dev); if (IS_ERR(dev_opp)) { int error = PTR_ERR(dev_opp); if (error != -ENODEV) WARN(1, "%s: dev_opp: %d\n", IS_ERR_OR_NULL(dev) ? "Invalid device" : dev_name(dev), error); return; } /* Hold our list modification lock here */ mutex_lock(&dev_opp_list_lock); /* Free static OPPs */ list_for_each_entry_safe(opp, tmp, &dev_opp->opp_list, node) { if (!opp->dynamic) _opp_remove(dev_opp, opp); } mutex_unlock(&dev_opp_list_lock); } EXPORT_SYMBOL_GPL(of_free_opp_table); #endif