/* * arch/ppc/platforms/85xx/tqm85xx.c * * TQM85xx (40/41/55/60) board specific routines * * Copyright (c) 2005 DENX Software Engineering * Stefan Roese * * Based on original work by * Kumar Gala * Copyright 2004 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* for linux/serial_core.h */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifndef CONFIG_PCI unsigned long isa_io_base = 0; unsigned long isa_mem_base = 0; #endif extern unsigned long total_memory; /* in mm/init */ unsigned char __res[sizeof (bd_t)]; /* Internal interrupts are all Level Sensitive, and Positive Polarity */ static u_char tqm85xx_openpic_initsenses[] __initdata = { MPC85XX_INTERNAL_IRQ_SENSES, 0x0, /* External 0: */ 0x0, /* External 1: */ #if defined(CONFIG_PCI) (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 2: PCI INTA */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 3: PCI INTB */ #else 0x0, /* External 2: */ 0x0, /* External 3: */ #endif 0x0, /* External 4: */ 0x0, /* External 5: */ 0x0, /* External 6: */ 0x0, /* External 7: */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 8: PHY */ 0x0, /* External 9: */ 0x0, /* External 10: */ 0x0, /* External 11: */ }; static const char *GFAR_PHY_0 = "phy0:2"; static const char *GFAR_PHY_1 = "phy0:1"; #ifdef CONFIG_MPC8540 static const char *GFAR_PHY_3 = "phy0:3"; #endif /* ************************************************************************ * * Setup the architecture * */ static void __init tqm85xx_setup_arch(void) { bd_t *binfo = (bd_t *) __res; unsigned int freq; struct gianfar_platform_data *pdata; struct gianfar_mdio_data *mdata; #ifdef CONFIG_MPC8560 cpm2_reset(); #endif /* get the core frequency */ freq = binfo->bi_intfreq; if (ppc_md.progress) ppc_md.progress("tqm85xx_setup_arch()", 0); /* Set loops_per_jiffy to a half-way reasonable value, for use until calibrate_delay gets called. */ loops_per_jiffy = freq / HZ; #ifdef CONFIG_PCI /* setup PCI host bridges */ mpc85xx_setup_hose(); #endif #ifndef CONFIG_MPC8560 #if defined(CONFIG_SERIAL_8250) mpc85xx_early_serial_map(); #endif #ifdef CONFIG_SERIAL_TEXT_DEBUG /* Invalidate the entry we stole earlier the serial ports * should be properly mapped */ invalidate_tlbcam_entry(num_tlbcam_entries - 1); #endif #endif /* CONFIG_MPC8560 */ /* setup the board related info for the MDIO bus */ mdata = (struct gianfar_mdio_data *) ppc_sys_get_pdata(MPC85xx_MDIO); mdata->irq[0] = MPC85xx_IRQ_EXT8; mdata->irq[1] = MPC85xx_IRQ_EXT8; mdata->irq[2] = -1; mdata->irq[3] = MPC85xx_IRQ_EXT8; mdata->irq[31] = -1; mdata->paddr += binfo->bi_immr_base; /* setup the board related information for the enet controllers */ pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1); if (pdata) { pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; pdata->bus_id = GFAR_PHY_0; memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6); } pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2); if (pdata) { pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; pdata->bus_id = GFAR_PHY_1; memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6); } #ifdef CONFIG_MPC8540 pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_FEC); if (pdata) { pdata->board_flags = 0; pdata->bus_id = GFAR_PHY_3; memcpy(pdata->mac_addr, binfo->bi_enet2addr, 6); } #endif #ifdef CONFIG_BLK_DEV_INITRD if (initrd_start) ROOT_DEV = Root_RAM0; else #endif #ifdef CONFIG_ROOT_NFS ROOT_DEV = Root_NFS; #else ROOT_DEV = Root_HDA1; #endif } #ifdef CONFIG_MPC8560 static irqreturn_t cpm2_cascade(int irq, void *dev_id, struct pt_regs *regs) { while ((irq = cpm2_get_irq(regs)) >= 0) __do_IRQ(irq, regs); return IRQ_HANDLED; } static struct irqaction cpm2_irqaction = { .handler = cpm2_cascade, .flags = SA_INTERRUPT, .mask = CPU_MASK_NONE, .name = "cpm2_cascade", }; #endif /* CONFIG_MPC8560 */ void __init tqm85xx_init_IRQ(void) { bd_t *binfo = (bd_t *) __res; /* Determine the Physical Address of the OpenPIC regs */ phys_addr_t OpenPIC_PAddr = binfo->bi_immr_base + MPC85xx_OPENPIC_OFFSET; OpenPIC_Addr = ioremap(OpenPIC_PAddr, MPC85xx_OPENPIC_SIZE); OpenPIC_InitSenses = tqm85xx_openpic_initsenses; OpenPIC_NumInitSenses = sizeof (tqm85xx_openpic_initsenses); /* Skip reserved space and internal sources */ openpic_set_sources(0, 32, OpenPIC_Addr + 0x10200); /* Map PIC IRQs 0-11 */ openpic_set_sources(48, 12, OpenPIC_Addr + 0x10000); /* we let openpic interrupts starting from an offset, to * leave space for cascading interrupts underneath. */ openpic_init(MPC85xx_OPENPIC_IRQ_OFFSET); #ifdef CONFIG_MPC8560 /* Setup CPM2 PIC */ cpm2_init_IRQ(); setup_irq(MPC85xx_IRQ_CPM, &cpm2_irqaction); #endif /* CONFIG_MPC8560 */ return; } int tqm85xx_show_cpuinfo(struct seq_file *m) { uint pvid, svid, phid1; uint memsize = total_memory; bd_t *binfo = (bd_t *) __res; unsigned int freq; /* get the core frequency */ freq = binfo->bi_intfreq; pvid = mfspr(SPRN_PVR); svid = mfspr(SPRN_SVR); seq_printf(m, "Vendor\t\t: TQ Components\n"); seq_printf(m, "Machine\t\t: TQM%s\n", cur_ppc_sys_spec->ppc_sys_name); seq_printf(m, "clock\t\t: %dMHz\n", freq / 1000000); seq_printf(m, "PVR\t\t: 0x%x\n", pvid); seq_printf(m, "SVR\t\t: 0x%x\n", svid); /* Display cpu Pll setting */ phid1 = mfspr(SPRN_HID1); seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f)); /* Display the amount of memory */ seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024)); return 0; } #if defined(CONFIG_I2C) && defined(CONFIG_SENSORS_DS1337) extern ulong ds1337_get_rtc_time(void); extern int ds1337_set_rtc_time(unsigned long nowtime); static int __init tqm85xx_rtc_hookup(void) { struct timespec tv; ppc_md.set_rtc_time = ds1337_set_rtc_time; ppc_md.get_rtc_time = ds1337_get_rtc_time; tv.tv_nsec = 0; tv.tv_sec = (ppc_md.get_rtc_time)(); do_settimeofday(&tv); return 0; } late_initcall(tqm85xx_rtc_hookup); #endif #ifdef CONFIG_PCI /* * interrupt routing */ int mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) { static char pci_irq_table[][4] = /* * PCI IDSEL/INTPIN->INTLINE * A B C D */ { {PIRQA, PIRQB, 0, 0}, }; const long min_idsel = 0x1c, max_idsel = 0x1c, irqs_per_slot = 4; return PCI_IRQ_TABLE_LOOKUP; } int mpc85xx_exclude_device(u_char bus, u_char devfn) { if (bus == 0 && PCI_SLOT(devfn) == 0) return PCIBIOS_DEVICE_NOT_FOUND; else return PCIBIOS_SUCCESSFUL; } #endif /* CONFIG_PCI */ #ifdef CONFIG_RAPIDIO void platform_rio_init(void) { /* 512MB RIO LAW at 0xc0000000 */ mpc85xx_rio_setup(0xc0000000, 0x20000000); } #endif /* CONFIG_RAPIDIO */ /* ************************************************************************ */ void __init platform_init(unsigned long r3, unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7) { /* parse_bootinfo must always be called first */ parse_bootinfo(find_bootinfo()); /* * If we were passed in a board information, copy it into the * residual data area. */ if (r3) { memcpy((void *) __res, (void *) (r3 + KERNELBASE), sizeof (bd_t)); } #if defined(CONFIG_SERIAL_TEXT_DEBUG) && !defined(CONFIG_MPC8560) { bd_t *binfo = (bd_t *) __res; struct uart_port p; /* Use the last TLB entry to map CCSRBAR to allow access to DUART regs */ settlbcam(num_tlbcam_entries - 1, binfo->bi_immr_base, binfo->bi_immr_base, MPC85xx_CCSRBAR_SIZE, _PAGE_IO, 0); memset(&p, 0, sizeof (p)); p.iotype = SERIAL_IO_MEM; p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART0_OFFSET; p.uartclk = binfo->bi_busfreq; gen550_init(0, &p); memset(&p, 0, sizeof (p)); p.iotype = SERIAL_IO_MEM; p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART1_OFFSET; p.uartclk = binfo->bi_busfreq; gen550_init(1, &p); } #endif #if defined(CONFIG_BLK_DEV_INITRD) /* * If the init RAM disk has been configured in, and there's a valid * starting address for it, set it up. */ if (r4) { initrd_start = r4 + KERNELBASE; initrd_end = r5 + KERNELBASE; } #endif /* CONFIG_BLK_DEV_INITRD */ /* Copy the kernel command line arguments to a safe place. */ if (r6) { *(char *) (r7 + KERNELBASE) = 0; strcpy(cmd_line, (char *) (r6 + KERNELBASE)); } identify_ppc_sys_by_id(mfspr(SPRN_SVR)); /* setup the PowerPC module struct */ ppc_md.setup_arch = tqm85xx_setup_arch; ppc_md.show_cpuinfo = tqm85xx_show_cpuinfo; ppc_md.init_IRQ = tqm85xx_init_IRQ; ppc_md.get_irq = openpic_get_irq; ppc_md.restart = mpc85xx_restart; ppc_md.power_off = mpc85xx_power_off; ppc_md.halt = mpc85xx_halt; ppc_md.find_end_of_memory = mpc85xx_find_end_of_memory; ppc_md.time_init = NULL; ppc_md.set_rtc_time = NULL; ppc_md.get_rtc_time = NULL; ppc_md.calibrate_decr = mpc85xx_calibrate_decr; #ifndef CONFIG_MPC8560 #if defined(CONFIG_SERIAL_8250) && defined(CONFIG_SERIAL_TEXT_DEBUG) ppc_md.progress = gen550_progress; #endif /* CONFIG_SERIAL_8250 && CONFIG_SERIAL_TEXT_DEBUG */ #if defined(CONFIG_SERIAL_8250) && defined(CONFIG_KGDB) ppc_md.early_serial_map = mpc85xx_early_serial_map; #endif /* CONFIG_SERIAL_8250 && CONFIG_KGDB */ #endif /* CONFIG_MPC8560 */ if (ppc_md.progress) ppc_md.progress("tqm85xx_init(): exit", 0); return; }