/* * PowerPC version * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) * Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP * Copyright (C) 1996 Cort Dougan * Adapted for Power Macintosh by Paul Mackerras. * Low-level exception handlers and MMU support * rewritten by Paul Mackerras. * Copyright (C) 1996 Paul Mackerras. * * This file contains low-level assembler routines for managing * the PowerPC MMU hash table. (PPC 8xx processors don't use a * hash table, so this file is not used on them.) * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. * */ #include #include #include #include #include #include #include #ifdef CONFIG_SMP .section .bss .align 2 .globl mmu_hash_lock mmu_hash_lock: .space 4 #endif /* CONFIG_SMP */ /* * Load a PTE into the hash table, if possible. * The address is in r4, and r3 contains an access flag: * _PAGE_RW (0x400) if a write. * r9 contains the SRR1 value, from which we use the MSR_PR bit. * SPRG_THREAD contains the physical address of the current task's thread. * * Returns to the caller if the access is illegal or there is no * mapping for the address. Otherwise it places an appropriate PTE * in the hash table and returns from the exception. * Uses r0, r3 - r8, r10, ctr, lr. */ .text _GLOBAL(hash_page) tophys(r7,0) /* gets -KERNELBASE into r7 */ #ifdef CONFIG_SMP addis r8,r7,mmu_hash_lock@h ori r8,r8,mmu_hash_lock@l lis r0,0x0fff b 10f 11: lwz r6,0(r8) cmpwi 0,r6,0 bne 11b 10: lwarx r6,0,r8 cmpwi 0,r6,0 bne- 11b stwcx. r0,0,r8 bne- 10b isync #endif /* Get PTE (linux-style) and check access */ lis r0,KERNELBASE@h /* check if kernel address */ cmplw 0,r4,r0 mfspr r8,SPRN_SPRG_THREAD /* current task's THREAD (phys) */ ori r3,r3,_PAGE_USER|_PAGE_PRESENT /* test low addresses as user */ lwz r5,PGDIR(r8) /* virt page-table root */ blt+ 112f /* assume user more likely */ lis r5,swapper_pg_dir@ha /* if kernel address, use */ addi r5,r5,swapper_pg_dir@l /* kernel page table */ rlwimi r3,r9,32-12,29,29 /* MSR_PR -> _PAGE_USER */ 112: add r5,r5,r7 /* convert to phys addr */ #ifndef CONFIG_PTE_64BIT rlwimi r5,r4,12,20,29 /* insert top 10 bits of address */ lwz r8,0(r5) /* get pmd entry */ rlwinm. r8,r8,0,0,19 /* extract address of pte page */ #else rlwinm r8,r4,13,19,29 /* Compute pgdir/pmd offset */ lwzx r8,r8,r5 /* Get L1 entry */ rlwinm. r8,r8,0,0,20 /* extract pt base address */ #endif #ifdef CONFIG_SMP beq- hash_page_out /* return if no mapping */ #else /* XXX it seems like the 601 will give a machine fault on the rfi if its alignment is wrong (bottom 4 bits of address are 8 or 0xc) and we have had a not-taken conditional branch to the address following the rfi. */ beqlr- #endif #ifndef CONFIG_PTE_64BIT rlwimi r8,r4,22,20,29 /* insert next 10 bits of address */ #else rlwimi r8,r4,23,20,28 /* compute pte address */ #endif rlwinm r0,r3,32-3,24,24 /* _PAGE_RW access -> _PAGE_DIRTY */ ori r0,r0,_PAGE_ACCESSED|_PAGE_HASHPTE /* * Update the linux PTE atomically. We do the lwarx up-front * because almost always, there won't be a permission violation * and there won't already be an HPTE, and thus we will have * to update the PTE to set _PAGE_HASHPTE. -- paulus. * * If PTE_64BIT is set, the low word is the flags word; use that * word for locking since it contains all the interesting bits. */ #if (PTE_FLAGS_OFFSET != 0) addi r8,r8,PTE_FLAGS_OFFSET #endif retry: lwarx r6,0,r8 /* get linux-style pte, flag word */ andc. r5,r3,r6 /* check access & ~permission */ #ifdef CONFIG_SMP bne- hash_page_out /* return if access not permitted */ #else bnelr- #endif or r5,r0,r6 /* set accessed/dirty bits */ #ifdef CONFIG_PTE_64BIT #ifdef CONFIG_SMP subf r10,r6,r8 /* create false data dependency */ subi r10,r10,PTE_FLAGS_OFFSET lwzx r10,r6,r10 /* Get upper PTE word */ #else lwz r10,-PTE_FLAGS_OFFSET(r8) #endif /* CONFIG_SMP */ #endif /* CONFIG_PTE_64BIT */ stwcx. r5,0,r8 /* attempt to update PTE */ bne- retry /* retry if someone got there first */ mfsrin r3,r4 /* get segment reg for segment */ mfctr r0 stw r0,_CTR(r11) bl create_hpte /* add the hash table entry */ #ifdef CONFIG_SMP eieio addis r8,r7,mmu_hash_lock@ha li r0,0 stw r0,mmu_hash_lock@l(r8) #endif /* Return from the exception */ lwz r5,_CTR(r11) mtctr r5 lwz r0,GPR0(r11) lwz r7,GPR7(r11) lwz r8,GPR8(r11) b fast_exception_return #ifdef CONFIG_SMP hash_page_out: eieio addis r8,r7,mmu_hash_lock@ha li r0,0 stw r0,mmu_hash_lock@l(r8) blr #endif /* CONFIG_SMP */ /* * Add an entry for a particular page to the hash table. * * add_hash_page(unsigned context, unsigned long va, unsigned long pmdval) * * We assume any necessary modifications to the pte (e.g. setting * the accessed bit) have already been done and that there is actually * a hash table in use (i.e. we're not on a 603). */ _GLOBAL(add_hash_page) mflr r0 stw r0,4(r1) /* Convert context and va to VSID */ mulli r3,r3,897*16 /* multiply context by context skew */ rlwinm r0,r4,4,28,31 /* get ESID (top 4 bits of va) */ mulli r0,r0,0x111 /* multiply by ESID skew */ add r3,r3,r0 /* note create_hpte trims to 24 bits */ #ifdef CONFIG_SMP CURRENT_THREAD_INFO(r8, r1) /* use cpu number to make tag */ lwz r8,TI_CPU(r8) /* to go in mmu_hash_lock */ oris r8,r8,12 #endif /* CONFIG_SMP */ /* * We disable interrupts here, even on UP, because we don't * want to race with hash_page, and because we want the * _PAGE_HASHPTE bit to be a reliable indication of whether * the HPTE exists (or at least whether one did once). * We also turn off the MMU for data accesses so that we * we can't take a hash table miss (assuming the code is * covered by a BAT). -- paulus */ mfmsr r9 SYNC rlwinm r0,r9,0,17,15 /* clear bit 16 (MSR_EE) */ rlwinm r0,r0,0,28,26 /* clear MSR_DR */ mtmsr r0 SYNC_601 isync tophys(r7,0) #ifdef CONFIG_SMP addis r6,r7,mmu_hash_lock@ha addi r6,r6,mmu_hash_lock@l 10: lwarx r0,0,r6 /* take the mmu_hash_lock */ cmpi 0,r0,0 bne- 11f stwcx. r8,0,r6 beq+ 12f 11: lwz r0,0(r6) cmpi 0,r0,0 beq 10b b 11b 12: isync #endif /* * Fetch the linux pte and test and set _PAGE_HASHPTE atomically. * If _PAGE_HASHPTE was already set, we don't replace the existing * HPTE, so we just unlock and return. */ mr r8,r5 #ifndef CONFIG_PTE_64BIT rlwimi r8,r4,22,20,29 #else rlwimi r8,r4,23,20,28 addi r8,r8,PTE_FLAGS_OFFSET #endif 1: lwarx r6,0,r8 andi. r0,r6,_PAGE_HASHPTE bne 9f /* if HASHPTE already set, done */ #ifdef CONFIG_PTE_64BIT #ifdef CONFIG_SMP subf r10,r6,r8 /* create false data dependency */ subi r10,r10,PTE_FLAGS_OFFSET lwzx r10,r6,r10 /* Get upper PTE word */ #else lwz r10,-PTE_FLAGS_OFFSET(r8) #endif /* CONFIG_SMP */ #endif /* CONFIG_PTE_64BIT */ ori r5,r6,_PAGE_HASHPTE stwcx. r5,0,r8 bne- 1b bl create_hpte 9: #ifdef CONFIG_SMP addis r6,r7,mmu_hash_lock@ha addi r6,r6,mmu_hash_lock@l eieio li r0,0 stw r0,0(r6) /* clear mmu_hash_lock */ #endif /* reenable interrupts and DR */ mtmsr r9 SYNC_601 isync lwz r0,4(r1) mtlr r0 blr /* * This routine adds a hardware PTE to the hash table. * It is designed to be called with the MMU either on or off. * r3 contains the VSID, r4 contains the virtual address, * r5 contains the linux PTE, r6 contains the old value of the * linux PTE (before setting _PAGE_HASHPTE) and r7 contains the * offset to be added to addresses (0 if the MMU is on, * -KERNELBASE if it is off). r10 contains the upper half of * the PTE if CONFIG_PTE_64BIT. * On SMP, the caller should have the mmu_hash_lock held. * We assume that the caller has (or will) set the _PAGE_HASHPTE * bit in the linux PTE in memory. The value passed in r6 should * be the old linux PTE value; if it doesn't have _PAGE_HASHPTE set * this routine will skip the search for an existing HPTE. * This procedure modifies r0, r3 - r6, r8, cr0. * -- paulus. * * For speed, 4 of the instructions get patched once the size and * physical address of the hash table are known. These definitions * of Hash_base and Hash_bits below are just an example. */ Hash_base = 0xc0180000 Hash_bits = 12 /* e.g. 256kB hash table */ Hash_msk = (((1 << Hash_bits) - 1) * 64) /* defines for the PTE format for 32-bit PPCs */ #define HPTE_SIZE 8 #define PTEG_SIZE 64 #define LG_PTEG_SIZE 6 #define LDPTEu lwzu #define LDPTE lwz #define STPTE stw #define CMPPTE cmpw #define PTE_H 0x40 #define PTE_V 0x80000000 #define TST_V(r) rlwinm. r,r,0,0,0 #define SET_V(r) oris r,r,PTE_V@h #define CLR_V(r,t) rlwinm r,r,0,1,31 #define HASH_LEFT 31-(LG_PTEG_SIZE+Hash_bits-1) #define HASH_RIGHT 31-LG_PTEG_SIZE _GLOBAL(create_hpte) /* Convert linux-style PTE (r5) to low word of PPC-style PTE (r8) */ rlwinm r8,r5,32-10,31,31 /* _PAGE_RW -> PP lsb */ rlwinm r0,r5,32-7,31,31 /* _PAGE_DIRTY -> PP lsb */ and r8,r8,r0 /* writable if _RW & _DIRTY */ rlwimi r5,r5,32-1,30,30 /* _PAGE_USER -> PP msb */ rlwimi r5,r5,32-2,31,31 /* _PAGE_USER -> PP lsb */ ori r8,r8,0xe04 /* clear out reserved bits */ andc r8,r5,r8 /* PP = user? (rw&dirty? 2: 3): 0 */ BEGIN_FTR_SECTION rlwinm r8,r8,0,~_PAGE_COHERENT /* clear M (coherence not required) */ END_FTR_SECTION_IFCLR(CPU_FTR_NEED_COHERENT) #ifdef CONFIG_PTE_64BIT /* Put the XPN bits into the PTE */ rlwimi r8,r10,8,20,22 rlwimi r8,r10,2,29,29 #endif /* Construct the high word of the PPC-style PTE (r5) */ rlwinm r5,r3,7,1,24 /* put VSID in 0x7fffff80 bits */ rlwimi r5,r4,10,26,31 /* put in API (abbrev page index) */ SET_V(r5) /* set V (valid) bit */ /* Get the address of the primary PTE group in the hash table (r3) */ _GLOBAL(hash_page_patch_A) addis r0,r7,Hash_base@h /* base address of hash table */ rlwimi r0,r3,LG_PTEG_SIZE,HASH_LEFT,HASH_RIGHT /* VSID -> hash */ rlwinm r3,r4,20+LG_PTEG_SIZE,HASH_LEFT,HASH_RIGHT /* PI -> hash */ xor r3,r3,r0 /* make primary hash */ li r0,8 /* PTEs/group */ /* * Test the _PAGE_HASHPTE bit in the old linux PTE, and skip the search * if it is clear, meaning that the HPTE isn't there already... */ andi. r6,r6,_PAGE_HASHPTE beq+ 10f /* no PTE: go look for an empty slot */ tlbie r4 addis r4,r7,htab_hash_searches@ha lwz r6,htab_hash_searches@l(r4) addi r6,r6,1 /* count how many searches we do */ stw r6,htab_hash_searches@l(r4) /* Search the primary PTEG for a PTE whose 1st (d)word matches r5 */ mtctr r0 addi r4,r3,-HPTE_SIZE 1: LDPTEu r6,HPTE_SIZE(r4) /* get next PTE */ CMPPTE 0,r6,r5 bdnzf 2,1b /* loop while ctr != 0 && !cr0.eq */ beq+ found_slot /* Search the secondary PTEG for a matching PTE */ ori r5,r5,PTE_H /* set H (secondary hash) bit */ _GLOBAL(hash_page_patch_B) xoris r4,r3,Hash_msk>>16 /* compute secondary hash */ xori r4,r4,(-PTEG_SIZE & 0xffff) addi r4,r4,-HPTE_SIZE mtctr r0 2: LDPTEu r6,HPTE_SIZE(r4) CMPPTE 0,r6,r5 bdnzf 2,2b beq+ found_slot xori r5,r5,PTE_H /* clear H bit again */ /* Search the primary PTEG for an empty slot */ 10: mtctr r0 addi r4,r3,-HPTE_SIZE /* search primary PTEG */ 1: LDPTEu r6,HPTE_SIZE(r4) /* get next PTE */ TST_V(r6) /* test valid bit */ bdnzf 2,1b /* loop while ctr != 0 && !cr0.eq */ beq+ found_empty /* update counter of times that the primary PTEG is full */ addis r4,r7,primary_pteg_full@ha lwz r6,primary_pteg_full@l(r4) addi r6,r6,1 stw r6,primary_pteg_full@l(r4) /* Search the secondary PTEG for an empty slot */ ori r5,r5,PTE_H /* set H (secondary hash) bit */ _GLOBAL(hash_page_patch_C) xoris r4,r3,Hash_msk>>16 /* compute secondary hash */ xori r4,r4,(-PTEG_SIZE & 0xffff) addi r4,r4,-HPTE_SIZE mtctr r0 2: LDPTEu r6,HPTE_SIZE(r4) TST_V(r6) bdnzf 2,2b beq+ found_empty xori r5,r5,PTE_H /* clear H bit again */ /* * Choose an arbitrary slot in the primary PTEG to overwrite. * Since both the primary and secondary PTEGs are full, and we * have no information that the PTEs in the primary PTEG are * more important or useful than those in the secondary PTEG, * and we know there is a definite (although small) speed * advantage to putting the PTE in the primary PTEG, we always * put the PTE in the primary PTEG. * * In addition, we skip any slot that is mapping kernel text in * order to avoid a deadlock when not using BAT mappings if * trying to hash in the kernel hash code itself after it has * already taken the hash table lock. This works in conjunction * with pre-faulting of the kernel text. * * If the hash table bucket is full of kernel text entries, we'll * lockup here but that shouldn't happen */ 1: addis r4,r7,next_slot@ha /* get next evict slot */ lwz r6,next_slot@l(r4) addi r6,r6,HPTE_SIZE /* search for candidate */ andi. r6,r6,7*HPTE_SIZE stw r6,next_slot@l(r4) add r4,r3,r6 LDPTE r0,HPTE_SIZE/2(r4) /* get PTE second word */ clrrwi r0,r0,12 lis r6,etext@h ori r6,r6,etext@l /* get etext */ tophys(r6,r6) cmpl cr0,r0,r6 /* compare and try again */ blt 1b #ifndef CONFIG_SMP /* Store PTE in PTEG */ found_empty: STPTE r5,0(r4) found_slot: STPTE r8,HPTE_SIZE/2(r4) #else /* CONFIG_SMP */ /* * Between the tlbie above and updating the hash table entry below, * another CPU could read the hash table entry and put it in its TLB. * There are 3 cases: * 1. using an empty slot * 2. updating an earlier entry to change permissions (i.e. enable write) * 3. taking over the PTE for an unrelated address * * In each case it doesn't really matter if the other CPUs have the old * PTE in their TLB. So we don't need to bother with another tlbie here, * which is convenient as we've overwritten the register that had the * address. :-) The tlbie above is mainly to make sure that this CPU comes * and gets the new PTE from the hash table. * * We do however have to make sure that the PTE is never in an invalid * state with the V bit set. */ found_empty: found_slot: CLR_V(r5,r0) /* clear V (valid) bit in PTE */ STPTE r5,0(r4) sync TLBSYNC STPTE r8,HPTE_SIZE/2(r4) /* put in correct RPN, WIMG, PP bits */ sync SET_V(r5) STPTE r5,0(r4) /* finally set V bit in PTE */ #endif /* CONFIG_SMP */ sync /* make sure pte updates get to memory */ blr .section .bss .align 2 next_slot: .space 4 primary_pteg_full: .space 4 htab_hash_searches: .space 4 .previous /* * Flush the entry for a particular page from the hash table. * * flush_hash_pages(unsigned context, unsigned long va, unsigned long pmdval, * int count) * * We assume that there is a hash table in use (Hash != 0). */ _GLOBAL(flush_hash_pages) tophys(r7,0) /* * We disable interrupts here, even on UP, because we want * the _PAGE_HASHPTE bit to be a reliable indication of * whether the HPTE exists (or at least whether one did once). * We also turn off the MMU for data accesses so that we * we can't take a hash table miss (assuming the code is * covered by a BAT). -- paulus */ mfmsr r10 SYNC rlwinm r0,r10,0,17,15 /* clear bit 16 (MSR_EE) */ rlwinm r0,r0,0,28,26 /* clear MSR_DR */ mtmsr r0 SYNC_601 isync /* First find a PTE in the range that has _PAGE_HASHPTE set */ #ifndef CONFIG_PTE_64BIT rlwimi r5,r4,22,20,29 #else rlwimi r5,r4,23,20,28 #endif 1: lwz r0,PTE_FLAGS_OFFSET(r5) cmpwi cr1,r6,1 andi. r0,r0,_PAGE_HASHPTE bne 2f ble cr1,19f addi r4,r4,0x1000 addi r5,r5,PTE_SIZE addi r6,r6,-1 b 1b /* Convert context and va to VSID */ 2: mulli r3,r3,897*16 /* multiply context by context skew */ rlwinm r0,r4,4,28,31 /* get ESID (top 4 bits of va) */ mulli r0,r0,0x111 /* multiply by ESID skew */ add r3,r3,r0 /* note code below trims to 24 bits */ /* Construct the high word of the PPC-style PTE (r11) */ rlwinm r11,r3,7,1,24 /* put VSID in 0x7fffff80 bits */ rlwimi r11,r4,10,26,31 /* put in API (abbrev page index) */ SET_V(r11) /* set V (valid) bit */ #ifdef CONFIG_SMP addis r9,r7,mmu_hash_lock@ha addi r9,r9,mmu_hash_lock@l CURRENT_THREAD_INFO(r8, r1) add r8,r8,r7 lwz r8,TI_CPU(r8) oris r8,r8,9 10: lwarx r0,0,r9 cmpi 0,r0,0 bne- 11f stwcx. r8,0,r9 beq+ 12f 11: lwz r0,0(r9) cmpi 0,r0,0 beq 10b b 11b 12: isync #endif /* * Check the _PAGE_HASHPTE bit in the linux PTE. If it is * already clear, we're done (for this pte). If not, * clear it (atomically) and proceed. -- paulus. */ #if (PTE_FLAGS_OFFSET != 0) addi r5,r5,PTE_FLAGS_OFFSET #endif 33: lwarx r8,0,r5 /* fetch the pte flags word */ andi. r0,r8,_PAGE_HASHPTE beq 8f /* done if HASHPTE is already clear */ rlwinm r8,r8,0,31,29 /* clear HASHPTE bit */ stwcx. r8,0,r5 /* update the pte */ bne- 33b /* Get the address of the primary PTE group in the hash table (r3) */ _GLOBAL(flush_hash_patch_A) addis r8,r7,Hash_base@h /* base address of hash table */ rlwimi r8,r3,LG_PTEG_SIZE,HASH_LEFT,HASH_RIGHT /* VSID -> hash */ rlwinm r0,r4,20+LG_PTEG_SIZE,HASH_LEFT,HASH_RIGHT /* PI -> hash */ xor r8,r0,r8 /* make primary hash */ /* Search the primary PTEG for a PTE whose 1st (d)word matches r5 */ li r0,8 /* PTEs/group */ mtctr r0 addi r12,r8,-HPTE_SIZE 1: LDPTEu r0,HPTE_SIZE(r12) /* get next PTE */ CMPPTE 0,r0,r11 bdnzf 2,1b /* loop while ctr != 0 && !cr0.eq */ beq+ 3f /* Search the secondary PTEG for a matching PTE */ ori r11,r11,PTE_H /* set H (secondary hash) bit */ li r0,8 /* PTEs/group */ _GLOBAL(flush_hash_patch_B) xoris r12,r8,Hash_msk>>16 /* compute secondary hash */ xori r12,r12,(-PTEG_SIZE & 0xffff) addi r12,r12,-HPTE_SIZE mtctr r0 2: LDPTEu r0,HPTE_SIZE(r12) CMPPTE 0,r0,r11 bdnzf 2,2b xori r11,r11,PTE_H /* clear H again */ bne- 4f /* should rarely fail to find it */ 3: li r0,0 STPTE r0,0(r12) /* invalidate entry */ 4: sync tlbie r4 /* in hw tlb too */ sync 8: ble cr1,9f /* if all ptes checked */ 81: addi r6,r6,-1 addi r5,r5,PTE_SIZE addi r4,r4,0x1000 lwz r0,0(r5) /* check next pte */ cmpwi cr1,r6,1 andi. r0,r0,_PAGE_HASHPTE bne 33b bgt cr1,81b 9: #ifdef CONFIG_SMP TLBSYNC li r0,0 stw r0,0(r9) /* clear mmu_hash_lock */ #endif 19: mtmsr r10 SYNC_601 isync blr /* * Flush an entry from the TLB */ _GLOBAL(_tlbie) #ifdef CONFIG_SMP CURRENT_THREAD_INFO(r8, r1) lwz r8,TI_CPU(r8) oris r8,r8,11 mfmsr r10 SYNC rlwinm r0,r10,0,17,15 /* clear bit 16 (MSR_EE) */ rlwinm r0,r0,0,28,26 /* clear DR */ mtmsr r0 SYNC_601 isync lis r9,mmu_hash_lock@h ori r9,r9,mmu_hash_lock@l tophys(r9,r9) 10: lwarx r7,0,r9 cmpwi 0,r7,0 bne- 10b stwcx. r8,0,r9 bne- 10b eieio tlbie r3 sync TLBSYNC li r0,0 stw r0,0(r9) /* clear mmu_hash_lock */ mtmsr r10 SYNC_601 isync #else /* CONFIG_SMP */ tlbie r3 sync #endif /* CONFIG_SMP */ blr /* * Flush the entire TLB. 603/603e only */ _GLOBAL(_tlbia) #if defined(CONFIG_SMP) CURRENT_THREAD_INFO(r8, r1) lwz r8,TI_CPU(r8) oris r8,r8,10 mfmsr r10 SYNC rlwinm r0,r10,0,17,15 /* clear bit 16 (MSR_EE) */ rlwinm r0,r0,0,28,26 /* clear DR */ mtmsr r0 SYNC_601 isync lis r9,mmu_hash_lock@h ori r9,r9,mmu_hash_lock@l tophys(r9,r9) 10: lwarx r7,0,r9 cmpwi 0,r7,0 bne- 10b stwcx. r8,0,r9 bne- 10b sync tlbia sync TLBSYNC li r0,0 stw r0,0(r9) /* clear mmu_hash_lock */ mtmsr r10 SYNC_601 isync #else /* CONFIG_SMP */ sync tlbia sync #endif /* CONFIG_SMP */ blr