/* * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License, version 2, as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. * * Copyright SUSE Linux Products GmbH 2010 * * Authors: Alexander Graf */ /* Real mode helpers */ #if defined(CONFIG_PPC_BOOK3S_64) #define GET_SHADOW_VCPU(reg) \ mr reg, r13 #elif defined(CONFIG_PPC_BOOK3S_32) #define GET_SHADOW_VCPU(reg) \ tophys(reg, r2); \ lwz reg, (THREAD + THREAD_KVM_SVCPU)(reg); \ tophys(reg, reg) #endif /* Disable for nested KVM */ #define USE_QUICK_LAST_INST /* Get helper functions for subarch specific functionality */ #if defined(CONFIG_PPC_BOOK3S_64) #include "book3s_64_slb.S" #elif defined(CONFIG_PPC_BOOK3S_32) #include "book3s_32_sr.S" #endif /****************************************************************************** * * * Entry code * * * *****************************************************************************/ .global kvmppc_handler_trampoline_enter kvmppc_handler_trampoline_enter: /* Required state: * * MSR = ~IR|DR * R1 = host R1 * R2 = host R2 * R4 = guest shadow MSR * R5 = normal host MSR * R6 = current host MSR (EE, IR, DR off) * LR = highmem guest exit code * all other volatile GPRS = free * SVCPU[CR] = guest CR * SVCPU[XER] = guest XER * SVCPU[CTR] = guest CTR * SVCPU[LR] = guest LR */ /* r3 = shadow vcpu */ GET_SHADOW_VCPU(r3) /* Save guest exit handler address and MSR */ mflr r0 PPC_STL r0, HSTATE_VMHANDLER(r3) PPC_STL r5, HSTATE_HOST_MSR(r3) /* Save R1/R2 in the PACA (64-bit) or shadow_vcpu (32-bit) */ PPC_STL r1, HSTATE_HOST_R1(r3) PPC_STL r2, HSTATE_HOST_R2(r3) /* Activate guest mode, so faults get handled by KVM */ li r11, KVM_GUEST_MODE_GUEST stb r11, HSTATE_IN_GUEST(r3) /* Switch to guest segment. This is subarch specific. */ LOAD_GUEST_SEGMENTS #ifdef CONFIG_PPC_BOOK3S_64 BEGIN_FTR_SECTION /* Save host FSCR */ mfspr r8, SPRN_FSCR std r8, HSTATE_HOST_FSCR(r13) /* Set FSCR during guest execution */ ld r9, SVCPU_SHADOW_FSCR(r13) mtspr SPRN_FSCR, r9 END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S) /* Some guests may need to have dcbz set to 32 byte length. * * Usually we ensure that by patching the guest's instructions * to trap on dcbz and emulate it in the hypervisor. * * If we can, we should tell the CPU to use 32 byte dcbz though, * because that's a lot faster. */ lbz r0, HSTATE_RESTORE_HID5(r3) cmpwi r0, 0 beq no_dcbz32_on mfspr r0,SPRN_HID5 ori r0, r0, 0x80 /* XXX HID5_dcbz32 = 0x80 */ mtspr SPRN_HID5,r0 no_dcbz32_on: #endif /* CONFIG_PPC_BOOK3S_64 */ /* Enter guest */ PPC_LL r8, SVCPU_CTR(r3) PPC_LL r9, SVCPU_LR(r3) lwz r10, SVCPU_CR(r3) lwz r11, SVCPU_XER(r3) mtctr r8 mtlr r9 mtcr r10 mtxer r11 /* Move SRR0 and SRR1 into the respective regs */ PPC_LL r9, SVCPU_PC(r3) /* First clear RI in our current MSR value */ li r0, MSR_RI andc r6, r6, r0 PPC_LL r0, SVCPU_R0(r3) PPC_LL r1, SVCPU_R1(r3) PPC_LL r2, SVCPU_R2(r3) PPC_LL r5, SVCPU_R5(r3) PPC_LL r7, SVCPU_R7(r3) PPC_LL r8, SVCPU_R8(r3) PPC_LL r10, SVCPU_R10(r3) PPC_LL r11, SVCPU_R11(r3) PPC_LL r12, SVCPU_R12(r3) PPC_LL r13, SVCPU_R13(r3) MTMSR_EERI(r6) mtsrr0 r9 mtsrr1 r4 PPC_LL r4, SVCPU_R4(r3) PPC_LL r6, SVCPU_R6(r3) PPC_LL r9, SVCPU_R9(r3) PPC_LL r3, (SVCPU_R3)(r3) RFI kvmppc_handler_trampoline_enter_end: /****************************************************************************** * * * Exit code * * * *****************************************************************************/ .global kvmppc_handler_trampoline_exit kvmppc_handler_trampoline_exit: .global kvmppc_interrupt_pr kvmppc_interrupt_pr: /* Register usage at this point: * * SPRG_SCRATCH0 = guest R13 * R12 = exit handler id * R13 = shadow vcpu (32-bit) or PACA (64-bit) * HSTATE.SCRATCH0 = guest R12 * HSTATE.SCRATCH1 = guest CR * */ /* Save registers */ PPC_STL r0, SVCPU_R0(r13) PPC_STL r1, SVCPU_R1(r13) PPC_STL r2, SVCPU_R2(r13) PPC_STL r3, SVCPU_R3(r13) PPC_STL r4, SVCPU_R4(r13) PPC_STL r5, SVCPU_R5(r13) PPC_STL r6, SVCPU_R6(r13) PPC_STL r7, SVCPU_R7(r13) PPC_STL r8, SVCPU_R8(r13) PPC_STL r9, SVCPU_R9(r13) PPC_STL r10, SVCPU_R10(r13) PPC_STL r11, SVCPU_R11(r13) /* Restore R1/R2 so we can handle faults */ PPC_LL r1, HSTATE_HOST_R1(r13) PPC_LL r2, HSTATE_HOST_R2(r13) /* Save guest PC and MSR */ #ifdef CONFIG_PPC64 BEGIN_FTR_SECTION andi. r0, r12, 0x2 cmpwi cr1, r0, 0 beq 1f mfspr r3,SPRN_HSRR0 mfspr r4,SPRN_HSRR1 andi. r12,r12,0x3ffd b 2f END_FTR_SECTION_IFSET(CPU_FTR_HVMODE) #endif 1: mfsrr0 r3 mfsrr1 r4 2: PPC_STL r3, SVCPU_PC(r13) PPC_STL r4, SVCPU_SHADOW_SRR1(r13) /* Get scratch'ed off registers */ GET_SCRATCH0(r9) PPC_LL r8, HSTATE_SCRATCH0(r13) lwz r7, HSTATE_SCRATCH1(r13) PPC_STL r9, SVCPU_R13(r13) PPC_STL r8, SVCPU_R12(r13) stw r7, SVCPU_CR(r13) /* Save more register state */ mfxer r5 mfdar r6 mfdsisr r7 mfctr r8 mflr r9 stw r5, SVCPU_XER(r13) PPC_STL r6, SVCPU_FAULT_DAR(r13) stw r7, SVCPU_FAULT_DSISR(r13) PPC_STL r8, SVCPU_CTR(r13) PPC_STL r9, SVCPU_LR(r13) /* * In order for us to easily get the last instruction, * we got the #vmexit at, we exploit the fact that the * virtual layout is still the same here, so we can just * ld from the guest's PC address */ /* We only load the last instruction when it's safe */ cmpwi r12, BOOK3S_INTERRUPT_DATA_STORAGE beq ld_last_inst cmpwi r12, BOOK3S_INTERRUPT_PROGRAM beq ld_last_inst cmpwi r12, BOOK3S_INTERRUPT_SYSCALL beq ld_last_prev_inst cmpwi r12, BOOK3S_INTERRUPT_ALIGNMENT beq- ld_last_inst #ifdef CONFIG_PPC64 BEGIN_FTR_SECTION cmpwi r12, BOOK3S_INTERRUPT_H_EMUL_ASSIST beq- ld_last_inst END_FTR_SECTION_IFSET(CPU_FTR_HVMODE) BEGIN_FTR_SECTION cmpwi r12, BOOK3S_INTERRUPT_FAC_UNAVAIL beq- ld_last_inst END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S) #endif b no_ld_last_inst ld_last_prev_inst: addi r3, r3, -4 ld_last_inst: /* Save off the guest instruction we're at */ /* In case lwz faults */ li r0, KVM_INST_FETCH_FAILED #ifdef USE_QUICK_LAST_INST /* Set guest mode to 'jump over instruction' so if lwz faults * we'll just continue at the next IP. */ li r9, KVM_GUEST_MODE_SKIP stb r9, HSTATE_IN_GUEST(r13) /* 1) enable paging for data */ mfmsr r9 ori r11, r9, MSR_DR /* Enable paging for data */ mtmsr r11 sync /* 2) fetch the instruction */ lwz r0, 0(r3) /* 3) disable paging again */ mtmsr r9 sync #endif stw r0, SVCPU_LAST_INST(r13) no_ld_last_inst: /* Unset guest mode */ li r9, KVM_GUEST_MODE_NONE stb r9, HSTATE_IN_GUEST(r13) /* Switch back to host MMU */ LOAD_HOST_SEGMENTS #ifdef CONFIG_PPC_BOOK3S_64 lbz r5, HSTATE_RESTORE_HID5(r13) cmpwi r5, 0 beq no_dcbz32_off li r4, 0 mfspr r5,SPRN_HID5 rldimi r5,r4,6,56 mtspr SPRN_HID5,r5 no_dcbz32_off: BEGIN_FTR_SECTION /* Save guest FSCR on a FAC_UNAVAIL interrupt */ cmpwi r12, BOOK3S_INTERRUPT_FAC_UNAVAIL bne+ no_fscr_save mfspr r7, SPRN_FSCR std r7, SVCPU_SHADOW_FSCR(r13) no_fscr_save: /* Restore host FSCR */ ld r8, HSTATE_HOST_FSCR(r13) mtspr SPRN_FSCR, r8 END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S) #endif /* CONFIG_PPC_BOOK3S_64 */ /* * For some interrupts, we need to call the real Linux * handler, so it can do work for us. This has to happen * as if the interrupt arrived from the kernel though, * so let's fake it here where most state is restored. * * Having set up SRR0/1 with the address where we want * to continue with relocation on (potentially in module * space), we either just go straight there with rfi[d], * or we jump to an interrupt handler if there is an * interrupt to be handled first. In the latter case, * the rfi[d] at the end of the interrupt handler will * get us back to where we want to continue. */ /* Register usage at this point: * * R1 = host R1 * R2 = host R2 * R10 = raw exit handler id * R12 = exit handler id * R13 = shadow vcpu (32-bit) or PACA (64-bit) * SVCPU.* = guest * * */ PPC_LL r6, HSTATE_HOST_MSR(r13) PPC_LL r8, HSTATE_VMHANDLER(r13) #ifdef CONFIG_PPC64 BEGIN_FTR_SECTION beq cr1, 1f mtspr SPRN_HSRR1, r6 mtspr SPRN_HSRR0, r8 END_FTR_SECTION_IFSET(CPU_FTR_HVMODE) #endif 1: /* Restore host msr -> SRR1 */ mtsrr1 r6 /* Load highmem handler address */ mtsrr0 r8 /* RFI into the highmem handler, or jump to interrupt handler */ cmpwi r12, BOOK3S_INTERRUPT_EXTERNAL beqa BOOK3S_INTERRUPT_EXTERNAL cmpwi r12, BOOK3S_INTERRUPT_DECREMENTER beqa BOOK3S_INTERRUPT_DECREMENTER cmpwi r12, BOOK3S_INTERRUPT_PERFMON beqa BOOK3S_INTERRUPT_PERFMON cmpwi r12, BOOK3S_INTERRUPT_DOORBELL beqa BOOK3S_INTERRUPT_DOORBELL RFI kvmppc_handler_trampoline_exit_end: