/* * This file contains miscellaneous low-level functions. * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) * * Largely rewritten by Cort Dougan (cort@cs.nmt.edu) * and Paul Mackerras. * Adapted for iSeries by Mike Corrigan (mikejc@us.ibm.com) * PPC64 updates by Dave Engebretsen (engebret@us.ibm.com) * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. * */ #include #include #include #include #include #include #include #include #include #include #include #include .text _GLOBAL(call_do_softirq) mflr r0 std r0,16(r1) stdu r1,THREAD_SIZE-STACK_FRAME_OVERHEAD(r3) mr r1,r3 bl __do_softirq ld r1,0(r1) ld r0,16(r1) mtlr r0 blr _GLOBAL(call_do_irq) mflr r0 std r0,16(r1) stdu r1,THREAD_SIZE-STACK_FRAME_OVERHEAD(r4) mr r1,r4 bl __do_irq ld r1,0(r1) ld r0,16(r1) mtlr r0 blr .section ".toc","aw" PPC64_CACHES: .tc ppc64_caches[TC],ppc64_caches .section ".text" /* * Write any modified data cache blocks out to memory * and invalidate the corresponding instruction cache blocks. * * flush_icache_range(unsigned long start, unsigned long stop) * * flush all bytes from start through stop-1 inclusive */ _KPROBE(flush_icache_range) BEGIN_FTR_SECTION PURGE_PREFETCHED_INS blr END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE) /* * Flush the data cache to memory * * Different systems have different cache line sizes * and in some cases i-cache and d-cache line sizes differ from * each other. */ ld r10,PPC64_CACHES@toc(r2) lwz r7,DCACHEL1LINESIZE(r10)/* Get cache line size */ addi r5,r7,-1 andc r6,r3,r5 /* round low to line bdy */ subf r8,r6,r4 /* compute length */ add r8,r8,r5 /* ensure we get enough */ lwz r9,DCACHEL1LOGLINESIZE(r10) /* Get log-2 of cache line size */ srw. r8,r8,r9 /* compute line count */ beqlr /* nothing to do? */ mtctr r8 1: dcbst 0,r6 add r6,r6,r7 bdnz 1b sync /* Now invalidate the instruction cache */ lwz r7,ICACHEL1LINESIZE(r10) /* Get Icache line size */ addi r5,r7,-1 andc r6,r3,r5 /* round low to line bdy */ subf r8,r6,r4 /* compute length */ add r8,r8,r5 lwz r9,ICACHEL1LOGLINESIZE(r10) /* Get log-2 of Icache line size */ srw. r8,r8,r9 /* compute line count */ beqlr /* nothing to do? */ mtctr r8 2: icbi 0,r6 add r6,r6,r7 bdnz 2b isync blr .previous .text /* * Like above, but only do the D-cache. * * flush_dcache_range(unsigned long start, unsigned long stop) * * flush all bytes from start to stop-1 inclusive */ _GLOBAL(flush_dcache_range) /* * Flush the data cache to memory * * Different systems have different cache line sizes */ ld r10,PPC64_CACHES@toc(r2) lwz r7,DCACHEL1LINESIZE(r10) /* Get dcache line size */ addi r5,r7,-1 andc r6,r3,r5 /* round low to line bdy */ subf r8,r6,r4 /* compute length */ add r8,r8,r5 /* ensure we get enough */ lwz r9,DCACHEL1LOGLINESIZE(r10) /* Get log-2 of dcache line size */ srw. r8,r8,r9 /* compute line count */ beqlr /* nothing to do? */ mtctr r8 0: dcbst 0,r6 add r6,r6,r7 bdnz 0b sync blr /* * Like above, but works on non-mapped physical addresses. * Use only for non-LPAR setups ! It also assumes real mode * is cacheable. Used for flushing out the DART before using * it as uncacheable memory * * flush_dcache_phys_range(unsigned long start, unsigned long stop) * * flush all bytes from start to stop-1 inclusive */ _GLOBAL(flush_dcache_phys_range) ld r10,PPC64_CACHES@toc(r2) lwz r7,DCACHEL1LINESIZE(r10) /* Get dcache line size */ addi r5,r7,-1 andc r6,r3,r5 /* round low to line bdy */ subf r8,r6,r4 /* compute length */ add r8,r8,r5 /* ensure we get enough */ lwz r9,DCACHEL1LOGLINESIZE(r10) /* Get log-2 of dcache line size */ srw. r8,r8,r9 /* compute line count */ beqlr /* nothing to do? */ mfmsr r5 /* Disable MMU Data Relocation */ ori r0,r5,MSR_DR xori r0,r0,MSR_DR sync mtmsr r0 sync isync mtctr r8 0: dcbst 0,r6 add r6,r6,r7 bdnz 0b sync isync mtmsr r5 /* Re-enable MMU Data Relocation */ sync isync blr _GLOBAL(flush_inval_dcache_range) ld r10,PPC64_CACHES@toc(r2) lwz r7,DCACHEL1LINESIZE(r10) /* Get dcache line size */ addi r5,r7,-1 andc r6,r3,r5 /* round low to line bdy */ subf r8,r6,r4 /* compute length */ add r8,r8,r5 /* ensure we get enough */ lwz r9,DCACHEL1LOGLINESIZE(r10)/* Get log-2 of dcache line size */ srw. r8,r8,r9 /* compute line count */ beqlr /* nothing to do? */ sync isync mtctr r8 0: dcbf 0,r6 add r6,r6,r7 bdnz 0b sync isync blr /* * Flush a particular page from the data cache to RAM. * Note: this is necessary because the instruction cache does *not* * snoop from the data cache. * * void __flush_dcache_icache(void *page) */ _GLOBAL(__flush_dcache_icache) /* * Flush the data cache to memory * * Different systems have different cache line sizes */ BEGIN_FTR_SECTION PURGE_PREFETCHED_INS blr END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE) /* Flush the dcache */ ld r7,PPC64_CACHES@toc(r2) clrrdi r3,r3,PAGE_SHIFT /* Page align */ lwz r4,DCACHEL1LINESPERPAGE(r7) /* Get # dcache lines per page */ lwz r5,DCACHEL1LINESIZE(r7) /* Get dcache line size */ mr r6,r3 mtctr r4 0: dcbst 0,r6 add r6,r6,r5 bdnz 0b sync /* Now invalidate the icache */ lwz r4,ICACHEL1LINESPERPAGE(r7) /* Get # icache lines per page */ lwz r5,ICACHEL1LINESIZE(r7) /* Get icache line size */ mtctr r4 1: icbi 0,r3 add r3,r3,r5 bdnz 1b isync blr _GLOBAL(__bswapdi2) srdi r8,r3,32 rlwinm r7,r3,8,0xffffffff rlwimi r7,r3,24,0,7 rlwinm r9,r8,8,0xffffffff rlwimi r7,r3,24,16,23 rlwimi r9,r8,24,0,7 rlwimi r9,r8,24,16,23 sldi r7,r7,32 or r3,r7,r9 blr #ifdef CONFIG_PPC_EARLY_DEBUG_BOOTX _GLOBAL(rmci_on) sync isync li r3,0x100 rldicl r3,r3,32,0 mfspr r5,SPRN_HID4 or r5,r5,r3 sync mtspr SPRN_HID4,r5 isync slbia isync sync blr _GLOBAL(rmci_off) sync isync li r3,0x100 rldicl r3,r3,32,0 mfspr r5,SPRN_HID4 andc r5,r5,r3 sync mtspr SPRN_HID4,r5 isync slbia isync sync blr #endif /* CONFIG_PPC_EARLY_DEBUG_BOOTX */ #if defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE) /* * Do an IO access in real mode */ _GLOBAL(real_readb) mfmsr r7 ori r0,r7,MSR_DR xori r0,r0,MSR_DR sync mtmsrd r0 sync isync mfspr r6,SPRN_HID4 rldicl r5,r6,32,0 ori r5,r5,0x100 rldicl r5,r5,32,0 sync mtspr SPRN_HID4,r5 isync slbia isync lbz r3,0(r3) sync mtspr SPRN_HID4,r6 isync slbia isync mtmsrd r7 sync isync blr /* * Do an IO access in real mode */ _GLOBAL(real_writeb) mfmsr r7 ori r0,r7,MSR_DR xori r0,r0,MSR_DR sync mtmsrd r0 sync isync mfspr r6,SPRN_HID4 rldicl r5,r6,32,0 ori r5,r5,0x100 rldicl r5,r5,32,0 sync mtspr SPRN_HID4,r5 isync slbia isync stb r3,0(r4) sync mtspr SPRN_HID4,r6 isync slbia isync mtmsrd r7 sync isync blr #endif /* defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE) */ #ifdef CONFIG_PPC_PASEMI _GLOBAL(real_205_readb) mfmsr r7 ori r0,r7,MSR_DR xori r0,r0,MSR_DR sync mtmsrd r0 sync isync LBZCIX(R3,R0,R3) isync mtmsrd r7 sync isync blr _GLOBAL(real_205_writeb) mfmsr r7 ori r0,r7,MSR_DR xori r0,r0,MSR_DR sync mtmsrd r0 sync isync STBCIX(R3,R0,R4) isync mtmsrd r7 sync isync blr #endif /* CONFIG_PPC_PASEMI */ #if defined(CONFIG_CPU_FREQ_PMAC64) || defined(CONFIG_CPU_FREQ_MAPLE) /* * SCOM access functions for 970 (FX only for now) * * unsigned long scom970_read(unsigned int address); * void scom970_write(unsigned int address, unsigned long value); * * The address passed in is the 24 bits register address. This code * is 970 specific and will not check the status bits, so you should * know what you are doing. */ _GLOBAL(scom970_read) /* interrupts off */ mfmsr r4 ori r0,r4,MSR_EE xori r0,r0,MSR_EE mtmsrd r0,1 /* rotate 24 bits SCOM address 8 bits left and mask out it's low 8 bits * (including parity). On current CPUs they must be 0'd, * and finally or in RW bit */ rlwinm r3,r3,8,0,15 ori r3,r3,0x8000 /* do the actual scom read */ sync mtspr SPRN_SCOMC,r3 isync mfspr r3,SPRN_SCOMD isync mfspr r0,SPRN_SCOMC isync /* XXX: fixup result on some buggy 970's (ouch ! we lost a bit, bah * that's the best we can do). Not implemented yet as we don't use * the scom on any of the bogus CPUs yet, but may have to be done * ultimately */ /* restore interrupts */ mtmsrd r4,1 blr _GLOBAL(scom970_write) /* interrupts off */ mfmsr r5 ori r0,r5,MSR_EE xori r0,r0,MSR_EE mtmsrd r0,1 /* rotate 24 bits SCOM address 8 bits left and mask out it's low 8 bits * (including parity). On current CPUs they must be 0'd. */ rlwinm r3,r3,8,0,15 sync mtspr SPRN_SCOMD,r4 /* write data */ isync mtspr SPRN_SCOMC,r3 /* write command */ isync mfspr 3,SPRN_SCOMC isync /* restore interrupts */ mtmsrd r5,1 blr #endif /* CONFIG_CPU_FREQ_PMAC64 || CONFIG_CPU_FREQ_MAPLE */ /* kexec_wait(phys_cpu) * * wait for the flag to change, indicating this kernel is going away but * the slave code for the next one is at addresses 0 to 100. * * This is used by all slaves, even those that did not find a matching * paca in the secondary startup code. * * Physical (hardware) cpu id should be in r3. */ _GLOBAL(kexec_wait) bl 1f 1: mflr r5 addi r5,r5,kexec_flag-1b 99: HMT_LOW #ifdef CONFIG_KEXEC /* use no memory without kexec */ lwz r4,0(r5) cmpwi 0,r4,0 bnea 0x60 #endif b 99b /* this can be in text because we won't change it until we are * running in real anyways */ kexec_flag: .long 0 #ifdef CONFIG_KEXEC /* kexec_smp_wait(void) * * call with interrupts off * note: this is a terminal routine, it does not save lr * * get phys id from paca * switch to real mode * mark the paca as no longer used * join other cpus in kexec_wait(phys_id) */ _GLOBAL(kexec_smp_wait) lhz r3,PACAHWCPUID(r13) bl real_mode li r4,KEXEC_STATE_REAL_MODE stb r4,PACAKEXECSTATE(r13) SYNC b kexec_wait /* * switch to real mode (turn mmu off) * we use the early kernel trick that the hardware ignores bits * 0 and 1 (big endian) of the effective address in real mode * * don't overwrite r3 here, it is live for kexec_wait above. */ real_mode: /* assume normal blr return */ 1: li r9,MSR_RI li r10,MSR_DR|MSR_IR mflr r11 /* return address to SRR0 */ mfmsr r12 andc r9,r12,r9 andc r10,r12,r10 mtmsrd r9,1 mtspr SPRN_SRR1,r10 mtspr SPRN_SRR0,r11 rfid /* * kexec_sequence(newstack, start, image, control, clear_all()) * * does the grungy work with stack switching and real mode switches * also does simple calls to other code */ _GLOBAL(kexec_sequence) mflr r0 std r0,16(r1) /* switch stacks to newstack -- &kexec_stack.stack */ stdu r1,THREAD_SIZE-STACK_FRAME_OVERHEAD(r3) mr r1,r3 li r0,0 std r0,16(r1) /* save regs for local vars on new stack. * yes, we won't go back, but ... */ std r31,-8(r1) std r30,-16(r1) std r29,-24(r1) std r28,-32(r1) std r27,-40(r1) std r26,-48(r1) std r25,-56(r1) stdu r1,-STACK_FRAME_OVERHEAD-64(r1) /* save args into preserved regs */ mr r31,r3 /* newstack (both) */ mr r30,r4 /* start (real) */ mr r29,r5 /* image (virt) */ mr r28,r6 /* control, unused */ mr r27,r7 /* clear_all() fn desc */ mr r26,r8 /* spare */ lhz r25,PACAHWCPUID(r13) /* get our phys cpu from paca */ /* disable interrupts, we are overwriting kernel data next */ mfmsr r3 rlwinm r3,r3,0,17,15 mtmsrd r3,1 /* copy dest pages, flush whole dest image */ mr r3,r29 bl kexec_copy_flush /* (image) */ /* turn off mmu */ bl real_mode /* copy 0x100 bytes starting at start to 0 */ li r3,0 mr r4,r30 /* start, aka phys mem offset */ li r5,0x100 li r6,0 bl copy_and_flush /* (dest, src, copy limit, start offset) */ 1: /* assume normal blr return */ /* release other cpus to the new kernel secondary start at 0x60 */ mflr r5 li r6,1 stw r6,kexec_flag-1b(5) /* clear out hardware hash page table and tlb */ #if !defined(_CALL_ELF) || _CALL_ELF != 2 ld r12,0(r27) /* deref function descriptor */ #else mr r12,r27 #endif mtctr r12 bctrl /* ppc_md.hpte_clear_all(void); */ /* * kexec image calling is: * the first 0x100 bytes of the entry point are copied to 0 * * all slaves branch to slave = 0x60 (absolute) * slave(phys_cpu_id); * * master goes to start = entry point * start(phys_cpu_id, start, 0); * * * a wrapper is needed to call existing kernels, here is an approximate * description of one method: * * v2: (2.6.10) * start will be near the boot_block (maybe 0x100 bytes before it?) * it will have a 0x60, which will b to boot_block, where it will wait * and 0 will store phys into struct boot-block and load r3 from there, * copy kernel 0-0x100 and tell slaves to back down to 0x60 again * * v1: (2.6.9) * boot block will have all cpus scanning device tree to see if they * are the boot cpu ????? * other device tree differences (prop sizes, va vs pa, etc)... */ mr r3,r25 # my phys cpu mr r4,r30 # start, aka phys mem offset mtlr 4 li r5,0 blr /* image->start(physid, image->start, 0); */ #endif /* CONFIG_KEXEC */ #ifdef CONFIG_MODULES #if defined(_CALL_ELF) && _CALL_ELF == 2 #ifdef CONFIG_MODVERSIONS .weak __crc_TOC. .section "___kcrctab+TOC.","a" .globl __kcrctab_TOC. __kcrctab_TOC.: .llong __crc_TOC. #endif /* * Export a fake .TOC. since both modpost and depmod will complain otherwise. * Both modpost and depmod strip the leading . so we do the same here. */ .section "__ksymtab_strings","a" __kstrtab_TOC.: .asciz "TOC." .section "___ksymtab+TOC.","a" /* This symbol name is important: it's used by modpost to find exported syms */ .globl __ksymtab_TOC. __ksymtab_TOC.: .llong 0 /* .value */ .llong __kstrtab_TOC. #endif /* ELFv2 */ #endif /* MODULES */