/* * Copyright (C) 2001, 2002, 2003 Broadcom Corporation * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #define SBPROF_TB_DEBUG 0 #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define DEVNAME "bcm1250_tbprof" static struct sbprof_tb sbp; #define TB_FULL (sbp.next_tb_sample == MAX_TB_SAMPLES) /************************************************************************ * Support for ZBbus sampling using the trace buffer * * We use the SCD performance counter interrupt, caused by a Zclk counter * overflow, to trigger the start of tracing. * * We set the trace buffer to sample everything and freeze on * overflow. * * We map the interrupt for trace_buffer_freeze to handle it on CPU 0. * ************************************************************************/ static u_int64_t tb_period; static void arm_tb(void) { u_int64_t scdperfcnt; u_int64_t next = (1ULL << 40) - tb_period; u_int64_t tb_options = M_SCD_TRACE_CFG_FREEZE_FULL; /* Generate an SCD_PERFCNT interrupt in TB_PERIOD Zclks to trigger start of trace. XXX vary sampling period */ __raw_writeq(0, IOADDR(A_SCD_PERF_CNT_1)); scdperfcnt = __raw_readq(IOADDR(A_SCD_PERF_CNT_CFG)); /* Unfortunately, in Pass 2 we must clear all counters to knock down a previous interrupt request. This means that bus profiling requires ALL of the SCD perf counters. */ __raw_writeq((scdperfcnt & ~M_SPC_CFG_SRC1) | // keep counters 0,2,3 as is M_SPC_CFG_ENABLE | // enable counting M_SPC_CFG_CLEAR | // clear all counters V_SPC_CFG_SRC1(1), // counter 1 counts cycles IOADDR(A_SCD_PERF_CNT_CFG)); __raw_writeq(next, IOADDR(A_SCD_PERF_CNT_1)); /* Reset the trace buffer */ __raw_writeq(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG)); #if 0 && defined(M_SCD_TRACE_CFG_FORCECNT) /* XXXKW may want to expose control to the data-collector */ tb_options |= M_SCD_TRACE_CFG_FORCECNT; #endif __raw_writeq(tb_options, IOADDR(A_SCD_TRACE_CFG)); sbp.tb_armed = 1; } static irqreturn_t sbprof_tb_intr(int irq, void *dev_id, struct pt_regs *regs) { int i; DBG(printk(DEVNAME ": tb_intr\n")); if (sbp.next_tb_sample < MAX_TB_SAMPLES) { /* XXX should use XKPHYS to make writes bypass L2 */ u_int64_t *p = sbp.sbprof_tbbuf[sbp.next_tb_sample++]; /* Read out trace */ __raw_writeq(M_SCD_TRACE_CFG_START_READ, IOADDR(A_SCD_TRACE_CFG)); __asm__ __volatile__ ("sync" : : : "memory"); /* Loop runs backwards because bundles are read out in reverse order */ for (i = 256 * 6; i > 0; i -= 6) { // Subscripts decrease to put bundle in the order // t0 lo, t0 hi, t1 lo, t1 hi, t2 lo, t2 hi p[i - 1] = __raw_readq(IOADDR(A_SCD_TRACE_READ)); // read t2 hi p[i - 2] = __raw_readq(IOADDR(A_SCD_TRACE_READ)); // read t2 lo p[i - 3] = __raw_readq(IOADDR(A_SCD_TRACE_READ)); // read t1 hi p[i - 4] = __raw_readq(IOADDR(A_SCD_TRACE_READ)); // read t1 lo p[i - 5] = __raw_readq(IOADDR(A_SCD_TRACE_READ)); // read t0 hi p[i - 6] = __raw_readq(IOADDR(A_SCD_TRACE_READ)); // read t0 lo } if (!sbp.tb_enable) { DBG(printk(DEVNAME ": tb_intr shutdown\n")); __raw_writeq(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG)); sbp.tb_armed = 0; wake_up(&sbp.tb_sync); } else { arm_tb(); // knock down current interrupt and get another one later } } else { /* No more trace buffer samples */ DBG(printk(DEVNAME ": tb_intr full\n")); __raw_writeq(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG)); sbp.tb_armed = 0; if (!sbp.tb_enable) { wake_up(&sbp.tb_sync); } wake_up(&sbp.tb_read); } return IRQ_HANDLED; } static irqreturn_t sbprof_pc_intr(int irq, void *dev_id, struct pt_regs *regs) { printk(DEVNAME ": unexpected pc_intr"); return IRQ_NONE; } int sbprof_zbprof_start(struct file *filp) { u_int64_t scdperfcnt; if (sbp.tb_enable) return -EBUSY; DBG(printk(DEVNAME ": starting\n")); sbp.tb_enable = 1; sbp.next_tb_sample = 0; filp->f_pos = 0; if (request_irq (K_INT_TRACE_FREEZE, sbprof_tb_intr, 0, DEVNAME " trace freeze", &sbp)) { return -EBUSY; } /* Make sure there isn't a perf-cnt interrupt waiting */ scdperfcnt = __raw_readq(IOADDR(A_SCD_PERF_CNT_CFG)); /* Disable and clear counters, override SRC_1 */ __raw_writeq((scdperfcnt & ~(M_SPC_CFG_SRC1 | M_SPC_CFG_ENABLE)) | M_SPC_CFG_ENABLE | M_SPC_CFG_CLEAR | V_SPC_CFG_SRC1(1), IOADDR(A_SCD_PERF_CNT_CFG)); /* We grab this interrupt to prevent others from trying to use it, even though we don't want to service the interrupts (they only feed into the trace-on-interrupt mechanism) */ if (request_irq (K_INT_PERF_CNT, sbprof_pc_intr, 0, DEVNAME " scd perfcnt", &sbp)) { free_irq(K_INT_TRACE_FREEZE, &sbp); return -EBUSY; } /* I need the core to mask these, but the interrupt mapper to pass them through. I am exploiting my knowledge that cp0_status masks out IP[5]. krw */ __raw_writeq(K_INT_MAP_I3, IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) + (K_INT_PERF_CNT << 3))); /* Initialize address traps */ __raw_writeq(0, IOADDR(A_ADDR_TRAP_UP_0)); __raw_writeq(0, IOADDR(A_ADDR_TRAP_UP_1)); __raw_writeq(0, IOADDR(A_ADDR_TRAP_UP_2)); __raw_writeq(0, IOADDR(A_ADDR_TRAP_UP_3)); __raw_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_0)); __raw_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_1)); __raw_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_2)); __raw_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_3)); __raw_writeq(0, IOADDR(A_ADDR_TRAP_CFG_0)); __raw_writeq(0, IOADDR(A_ADDR_TRAP_CFG_1)); __raw_writeq(0, IOADDR(A_ADDR_TRAP_CFG_2)); __raw_writeq(0, IOADDR(A_ADDR_TRAP_CFG_3)); /* Initialize Trace Event 0-7 */ // when interrupt __raw_writeq(M_SCD_TREVT_INTERRUPT, IOADDR(A_SCD_TRACE_EVENT_0)); __raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_1)); __raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_2)); __raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_3)); __raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_4)); __raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_5)); __raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_6)); __raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_7)); /* Initialize Trace Sequence 0-7 */ // Start on event 0 (interrupt) __raw_writeq(V_SCD_TRSEQ_FUNC_START | 0x0fff, IOADDR(A_SCD_TRACE_SEQUENCE_0)); // dsamp when d used | asamp when a used __raw_writeq(M_SCD_TRSEQ_ASAMPLE | M_SCD_TRSEQ_DSAMPLE | K_SCD_TRSEQ_TRIGGER_ALL, IOADDR(A_SCD_TRACE_SEQUENCE_1)); __raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_2)); __raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_3)); __raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_4)); __raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_5)); __raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_6)); __raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_7)); /* Now indicate the PERF_CNT interrupt as a trace-relevant interrupt */ __raw_writeq(1ULL << K_INT_PERF_CNT, IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_TRACE))); arm_tb(); DBG(printk(DEVNAME ": done starting\n")); return 0; } int sbprof_zbprof_stop(void) { DEFINE_WAIT(wait); DBG(printk(DEVNAME ": stopping\n")); if (sbp.tb_enable) { sbp.tb_enable = 0; /* XXXKW there is a window here where the intr handler may run, see the disable, and do the wake_up before this sleep happens. */ if (sbp.tb_armed) { DBG(printk(DEVNAME ": wait for disarm\n")); prepare_to_wait(&sbp.tb_sync, &wait, TASK_INTERRUPTIBLE); schedule(); finish_wait(&sbp.tb_sync, &wait); DBG(printk(DEVNAME ": disarm complete\n")); } free_irq(K_INT_TRACE_FREEZE, &sbp); free_irq(K_INT_PERF_CNT, &sbp); } DBG(printk(DEVNAME ": done stopping\n")); return 0; } static int sbprof_tb_open(struct inode *inode, struct file *filp) { int minor; minor = iminor(inode); if (minor != 0) { return -ENODEV; } if (sbp.open) { return -EBUSY; } memset(&sbp, 0, sizeof(struct sbprof_tb)); sbp.sbprof_tbbuf = vmalloc(MAX_TBSAMPLE_BYTES); if (!sbp.sbprof_tbbuf) { return -ENOMEM; } memset(sbp.sbprof_tbbuf, 0, MAX_TBSAMPLE_BYTES); init_waitqueue_head(&sbp.tb_sync); init_waitqueue_head(&sbp.tb_read); sbp.open = 1; return 0; } static int sbprof_tb_release(struct inode *inode, struct file *filp) { int minor; minor = iminor(inode); if (minor != 0 || !sbp.open) { return -ENODEV; } if (sbp.tb_armed || sbp.tb_enable) { sbprof_zbprof_stop(); } vfree(sbp.sbprof_tbbuf); sbp.open = 0; return 0; } static ssize_t sbprof_tb_read(struct file *filp, char *buf, size_t size, loff_t *offp) { int cur_sample, sample_off, cur_count, sample_left; char *src; int count = 0; char *dest = buf; long cur_off = *offp; count = 0; cur_sample = cur_off / TB_SAMPLE_SIZE; sample_off = cur_off % TB_SAMPLE_SIZE; sample_left = TB_SAMPLE_SIZE - sample_off; while (size && (cur_sample < sbp.next_tb_sample)) { cur_count = size < sample_left ? size : sample_left; src = (char *)(((long)sbp.sbprof_tbbuf[cur_sample])+sample_off); copy_to_user(dest, src, cur_count); DBG(printk(DEVNAME ": read from sample %d, %d bytes\n", cur_sample, cur_count)); size -= cur_count; sample_left -= cur_count; if (!sample_left) { cur_sample++; sample_off = 0; sample_left = TB_SAMPLE_SIZE; } else { sample_off += cur_count; } cur_off += cur_count; dest += cur_count; count += cur_count; } *offp = cur_off; return count; } static long sbprof_tb_ioctl(struct file *filp, unsigned int command, unsigned long arg) { int error = 0; lock_kernel(); switch (command) { case SBPROF_ZBSTART: error = sbprof_zbprof_start(filp); break; case SBPROF_ZBSTOP: error = sbprof_zbprof_stop(); break; case SBPROF_ZBWAITFULL: DEFINE_WAIT(wait); prepare_to_wait(&sbp.tb_read, &wait, TASK_INTERRUPTIBLE); schedule(); finish_wait(&sbp.tb_read, &wait); /* XXXKW check if interrupted? */ return put_user(TB_FULL, (int *) arg); default: error = -EINVAL; break; } unlock_kernel(); return error; } static struct file_operations sbprof_tb_fops = { .owner = THIS_MODULE, .open = sbprof_tb_open, .release = sbprof_tb_release, .read = sbprof_tb_read, .unlocked_ioctl = sbprof_tb_ioctl, .compat_ioctl = sbprof_tb_ioctl, .mmap = NULL, }; static int __init sbprof_tb_init(void) { if (register_chrdev(SBPROF_TB_MAJOR, DEVNAME, &sbprof_tb_fops)) { printk(KERN_WARNING DEVNAME ": initialization failed (dev %d)\n", SBPROF_TB_MAJOR); return -EIO; } sbp.open = 0; tb_period = zbbus_mhz * 10000LL; printk(KERN_INFO DEVNAME ": initialized - tb_period = %lld\n", tb_period); return 0; } static void __exit sbprof_tb_cleanup(void) { unregister_chrdev(SBPROF_TB_MAJOR, DEVNAME); } module_init(sbprof_tb_init); module_exit(sbprof_tb_cleanup);