/* * arch/mips/ddb5074/setup.c -- NEC DDB Vrc-5074 setup routines * * Copyright (C) 2000 Geert Uytterhoeven * Sony Software Development Center Europe (SDCE), Brussels */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include static void (*back_to_prom) (void) = (void (*)(void)) 0xbfc00000; static void ddb_machine_restart(char *command) { u32 t; /* PCI cold reset */ t = nile4_in32(NILE4_PCICTRL + 4); t |= 0x40000000; nile4_out32(NILE4_PCICTRL + 4, t); /* CPU cold reset */ t = nile4_in32(NILE4_CPUSTAT); t |= 1; nile4_out32(NILE4_CPUSTAT, t); /* Call the PROM */ back_to_prom(); } static void ddb_machine_halt(void) { printk("DDB Vrc-5074 halted.\n"); do { } while (1); } static void ddb_machine_power_off(void) { printk("DDB Vrc-5074 halted. Please turn off the power.\n"); do { } while (1); } extern void rtc_ds1386_init(unsigned long base); extern void (*board_timer_setup) (struct irqaction * irq); static void __init ddb_timer_init(struct irqaction *irq) { /* set the clock to 1 Hz */ nile4_out32(NILE4_T2CTRL, 1000000); /* enable the General-Purpose Timer */ nile4_out32(NILE4_T2CTRL + 4, 0x00000001); /* reset timer */ nile4_out32(NILE4_T2CNTR, 0); /* enable interrupt */ setup_irq(nile4_to_irq(NILE4_INT_GPT), irq); nile4_enable_irq(nile4_to_irq(NILE4_INT_GPT)); change_c0_status(ST0_IM, IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4); } static void __init ddb_time_init(void) { /* we have ds1396 RTC chip */ rtc_ds1386_init(KSEG1ADDR(DDB_PCI_MEM_BASE)); } void __init plat_setup(void) { set_io_port_base(NILE4_PCI_IO_BASE); isa_slot_offset = NILE4_PCI_MEM_BASE; board_timer_setup = ddb_timer_init; board_time_init = ddb_time_init; _machine_restart = ddb_machine_restart; _machine_halt = ddb_machine_halt; pm_power_off = ddb_machine_power_off; ddb_out32(DDB_BAR0, 0); ddb_set_pmr(DDB_PCIINIT0, DDB_PCICMD_IO, 0, 0x10); ddb_set_pmr(DDB_PCIINIT1, DDB_PCICMD_MEM, DDB_PCI_MEM_BASE , 0x10); /* Reboot on panic */ panic_timeout = 180; } #define USE_NILE4_SERIAL 0 #if USE_NILE4_SERIAL #define ns16550_in(reg) nile4_in8((reg)*8) #define ns16550_out(reg, val) nile4_out8((reg)*8, (val)) #else #define NS16550_BASE (NILE4_PCI_IO_BASE+0x03f8) static inline u8 ns16550_in(u32 reg) { return *(volatile u8 *) (NS16550_BASE + reg); } static inline void ns16550_out(u32 reg, u8 val) { *(volatile u8 *) (NS16550_BASE + reg) = val; } #endif #define NS16550_RBR 0 #define NS16550_THR 0 #define NS16550_DLL 0 #define NS16550_IER 1 #define NS16550_DLM 1 #define NS16550_FCR 2 #define NS16550_IIR 2 #define NS16550_LCR 3 #define NS16550_MCR 4 #define NS16550_LSR 5 #define NS16550_MSR 6 #define NS16550_SCR 7 #define NS16550_LSR_DR 0x01 /* Data ready */ #define NS16550_LSR_OE 0x02 /* Overrun */ #define NS16550_LSR_PE 0x04 /* Parity error */ #define NS16550_LSR_FE 0x08 /* Framing error */ #define NS16550_LSR_BI 0x10 /* Break */ #define NS16550_LSR_THRE 0x20 /* Xmit holding register empty */ #define NS16550_LSR_TEMT 0x40 /* Xmitter empty */ #define NS16550_LSR_ERR 0x80 /* Error */ void _serinit(void) { #if USE_NILE4_SERIAL ns16550_out(NS16550_LCR, 0x80); ns16550_out(NS16550_DLM, 0x00); ns16550_out(NS16550_DLL, 0x36); /* 9600 baud */ ns16550_out(NS16550_LCR, 0x00); ns16550_out(NS16550_LCR, 0x03); ns16550_out(NS16550_FCR, 0x47); #else /* done by PMON */ #endif } void _putc(char c) { while (!(ns16550_in(NS16550_LSR) & NS16550_LSR_THRE)); ns16550_out(NS16550_THR, c); if (c == '\n') { while (!(ns16550_in(NS16550_LSR) & NS16550_LSR_THRE)); ns16550_out(NS16550_THR, '\r'); } } void _puts(const char *s) { char c; while ((c = *s++)) _putc(c); } char _getc(void) { while (!(ns16550_in(NS16550_LSR) & NS16550_LSR_DR)); return ns16550_in(NS16550_RBR); } int _testc(void) { return (ns16550_in(NS16550_LSR) & NS16550_LSR_DR) != 0; } /* * Hexadecimal 7-segment LED */ void ddb5074_led_hex(int hex) { outb(hex, 0x80); } /* * LEDs D2 and D3, connected to the GPIO pins of the PMU in the ALi M1543 */ struct pci_dev *pci_pmu = NULL; void ddb5074_led_d2(int on) { u8 t; if (pci_pmu) { pci_read_config_byte(pci_pmu, 0x7e, &t); if (on) t &= 0x7f; else t |= 0x80; pci_write_config_byte(pci_pmu, 0x7e, t); } } void ddb5074_led_d3(int on) { u8 t; if (pci_pmu) { pci_read_config_byte(pci_pmu, 0x7e, &t); if (on) t &= 0xbf; else t |= 0x40; pci_write_config_byte(pci_pmu, 0x7e, t); } }