/* linux/arch/arm/plat-samsung/time.c * * Copyright (C) 2003-2005 Simtec Electronics * Ben Dooks, * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include static unsigned long timer_startval; static unsigned long timer_usec_ticks; #ifndef TICK_MAX #define TICK_MAX (0xffff) #endif #define TIMER_USEC_SHIFT 16 /* we use the shifted arithmetic to work out the ratio of timer ticks * to usecs, as often the peripheral clock is not a nice even multiple * of 1MHz. * * shift of 14 and 15 are too low for the 12MHz, 16 seems to be ok * for the current HZ value of 200 without producing overflows. * * Original patch by Dimitry Andric, updated by Ben Dooks */ /* timer_mask_usec_ticks * * given a clock and divisor, make the value to pass into timer_ticks_to_usec * to scale the ticks into usecs */ static inline unsigned long timer_mask_usec_ticks(unsigned long scaler, unsigned long pclk) { unsigned long den = pclk / 1000; return ((1000 << TIMER_USEC_SHIFT) * scaler + (den >> 1)) / den; } /* timer_ticks_to_usec * * convert timer ticks to usec. */ static inline unsigned long timer_ticks_to_usec(unsigned long ticks) { unsigned long res; res = ticks * timer_usec_ticks; res += 1 << (TIMER_USEC_SHIFT - 4); /* round up slightly */ return res >> TIMER_USEC_SHIFT; } /*** * Returns microsecond since last clock interrupt. Note that interrupts * will have been disabled by do_gettimeoffset() * IRQs are disabled before entering here from do_gettimeofday() */ static unsigned long s3c2410_gettimeoffset (void) { unsigned long tdone; unsigned long tval; /* work out how many ticks have gone since last timer interrupt */ tval = __raw_readl(S3C2410_TCNTO(4)); tdone = timer_startval - tval; /* check to see if there is an interrupt pending */ if (s3c24xx_ostimer_pending()) { /* re-read the timer, and try and fix up for the missed * interrupt. Note, the interrupt may go off before the * timer has re-loaded from wrapping. */ tval = __raw_readl(S3C2410_TCNTO(4)); tdone = timer_startval - tval; if (tval != 0) tdone += timer_startval; } return timer_ticks_to_usec(tdone); } /* * IRQ handler for the timer */ static irqreturn_t s3c2410_timer_interrupt(int irq, void *dev_id) { timer_tick(); return IRQ_HANDLED; } static struct irqaction s3c2410_timer_irq = { .name = "S3C2410 Timer Tick", .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, .handler = s3c2410_timer_interrupt, }; #define use_tclk1_12() ( \ machine_is_bast() || \ machine_is_vr1000() || \ machine_is_anubis() || \ machine_is_osiris()) static struct clk *tin; static struct clk *tdiv; static struct clk *timerclk; /* * Set up timer interrupt, and return the current time in seconds. * * Currently we only use timer4, as it is the only timer which has no * other function that can be exploited externally */ static void s3c2410_timer_setup (void) { unsigned long tcon; unsigned long tcnt; unsigned long tcfg1; unsigned long tcfg0; tcnt = TICK_MAX; /* default value for tcnt */ /* configure the system for whichever machine is in use */ if (use_tclk1_12()) { /* timer is at 12MHz, scaler is 1 */ timer_usec_ticks = timer_mask_usec_ticks(1, 12000000); tcnt = 12000000 / HZ; tcfg1 = __raw_readl(S3C2410_TCFG1); tcfg1 &= ~S3C2410_TCFG1_MUX4_MASK; tcfg1 |= S3C2410_TCFG1_MUX4_TCLK1; __raw_writel(tcfg1, S3C2410_TCFG1); } else { unsigned long pclk; struct clk *tscaler; /* for the h1940 (and others), we use the pclk from the core * to generate the timer values. since values around 50 to * 70MHz are not values we can directly generate the timer * value from, we need to pre-scale and divide before using it. * * for instance, using 50.7MHz and dividing by 6 gives 8.45MHz * (8.45 ticks per usec) */ pclk = clk_get_rate(timerclk); /* configure clock tick */ timer_usec_ticks = timer_mask_usec_ticks(6, pclk); tscaler = clk_get_parent(tdiv); clk_set_rate(tscaler, pclk / 3); clk_set_rate(tdiv, pclk / 6); clk_set_parent(tin, tdiv); tcnt = clk_get_rate(tin) / HZ; } tcon = __raw_readl(S3C2410_TCON); tcfg0 = __raw_readl(S3C2410_TCFG0); tcfg1 = __raw_readl(S3C2410_TCFG1); /* timers reload after counting zero, so reduce the count by 1 */ tcnt--; printk(KERN_DEBUG "timer tcon=%08lx, tcnt %04lx, tcfg %08lx,%08lx, usec %08lx\n", tcon, tcnt, tcfg0, tcfg1, timer_usec_ticks); /* check to see if timer is within 16bit range... */ if (tcnt > TICK_MAX) { panic("setup_timer: HZ is too small, cannot configure timer!"); return; } __raw_writel(tcfg1, S3C2410_TCFG1); __raw_writel(tcfg0, S3C2410_TCFG0); timer_startval = tcnt; __raw_writel(tcnt, S3C2410_TCNTB(4)); /* ensure timer is stopped... */ tcon &= ~(7<<20); tcon |= S3C2410_TCON_T4RELOAD; tcon |= S3C2410_TCON_T4MANUALUPD; __raw_writel(tcon, S3C2410_TCON); __raw_writel(tcnt, S3C2410_TCNTB(4)); __raw_writel(tcnt, S3C2410_TCMPB(4)); /* start the timer running */ tcon |= S3C2410_TCON_T4START; tcon &= ~S3C2410_TCON_T4MANUALUPD; __raw_writel(tcon, S3C2410_TCON); } static void __init s3c2410_timer_resources(void) { struct platform_device tmpdev; tmpdev.dev.bus = &platform_bus_type; tmpdev.id = 4; timerclk = clk_get(NULL, "timers"); if (IS_ERR(timerclk)) panic("failed to get clock for system timer"); clk_enable(timerclk); if (!use_tclk1_12()) { tin = clk_get(&tmpdev.dev, "pwm-tin"); if (IS_ERR(tin)) panic("failed to get pwm-tin clock for system timer"); tdiv = clk_get(&tmpdev.dev, "pwm-tdiv"); if (IS_ERR(tdiv)) panic("failed to get pwm-tdiv clock for system timer"); } clk_enable(tin); } static void __init s3c2410_timer_init(void) { s3c2410_timer_resources(); s3c2410_timer_setup(); setup_irq(IRQ_TIMER4, &s3c2410_timer_irq); } struct sys_timer s3c24xx_timer = { .init = s3c2410_timer_init, .offset = s3c2410_gettimeoffset, .resume = s3c2410_timer_setup };