/* * linux/arch/arm/mm/arm740.S: utility functions for ARM740 * * Copyright (C) 2004-2006 Hyok S. Choi (hyok.choi@samsung.com) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * */ #include #include #include #include #include #include #include #include .text /* * cpu_arm740_proc_init() * cpu_arm740_do_idle() * cpu_arm740_dcache_clean_area() * cpu_arm740_switch_mm() * * These are not required. */ ENTRY(cpu_arm740_proc_init) ENTRY(cpu_arm740_do_idle) ENTRY(cpu_arm740_dcache_clean_area) ENTRY(cpu_arm740_switch_mm) mov pc, lr /* * cpu_arm740_proc_fin() */ ENTRY(cpu_arm740_proc_fin) mrc p15, 0, r0, c1, c0, 0 bic r0, r0, #0x3f000000 @ bank/f/lock/s bic r0, r0, #0x0000000c @ w-buffer/cache mcr p15, 0, r0, c1, c0, 0 @ disable caches mov pc, lr /* * cpu_arm740_reset(loc) * Params : r0 = address to jump to * Notes : This sets up everything for a reset */ ENTRY(cpu_arm740_reset) mov ip, #0 mcr p15, 0, ip, c7, c0, 0 @ invalidate cache mrc p15, 0, ip, c1, c0, 0 @ get ctrl register bic ip, ip, #0x0000000c @ ............wc.. mcr p15, 0, ip, c1, c0, 0 @ ctrl register mov pc, r0 __CPUINIT .type __arm740_setup, #function __arm740_setup: mov r0, #0 mcr p15, 0, r0, c7, c0, 0 @ invalidate caches mcr p15, 0, r0, c6, c3 @ disable area 3~7 mcr p15, 0, r0, c6, c4 mcr p15, 0, r0, c6, c5 mcr p15, 0, r0, c6, c6 mcr p15, 0, r0, c6, c7 mov r0, #0x0000003F @ base = 0, size = 4GB mcr p15, 0, r0, c6, c0 @ set area 0, default ldr r0, =(CONFIG_DRAM_BASE & 0xFFFFF000) @ base[31:12] of RAM ldr r1, =(CONFIG_DRAM_SIZE >> 12) @ size of RAM (must be >= 4KB) mov r2, #10 @ 11 is the minimum (4KB) 1: add r2, r2, #1 @ area size *= 2 mov r1, r1, lsr #1 bne 1b @ count not zero r-shift orr r0, r0, r2, lsl #1 @ the area register value orr r0, r0, #1 @ set enable bit mcr p15, 0, r0, c6, c1 @ set area 1, RAM ldr r0, =(CONFIG_FLASH_MEM_BASE & 0xFFFFF000) @ base[31:12] of FLASH ldr r1, =(CONFIG_FLASH_SIZE >> 12) @ size of FLASH (must be >= 4KB) mov r2, #10 @ 11 is the minimum (4KB) 1: add r2, r2, #1 @ area size *= 2 mov r1, r1, lsr #1 bne 1b @ count not zero r-shift orr r0, r0, r2, lsl #1 @ the area register value orr r0, r0, #1 @ set enable bit mcr p15, 0, r0, c6, c2 @ set area 2, ROM/FLASH mov r0, #0x06 mcr p15, 0, r0, c2, c0 @ Region 1&2 cacheable #ifdef CONFIG_CPU_DCACHE_WRITETHROUGH mov r0, #0x00 @ disable whole write buffer #else mov r0, #0x02 @ Region 1 write bufferred #endif mcr p15, 0, r0, c3, c0 mov r0, #0x10000 sub r0, r0, #1 @ r0 = 0xffff mcr p15, 0, r0, c5, c0 @ all read/write access mrc p15, 0, r0, c1, c0 @ get control register bic r0, r0, #0x3F000000 @ set to standard caching mode @ need some benchmark orr r0, r0, #0x0000000d @ MPU/Cache/WB mov pc, lr .size __arm740_setup, . - __arm740_setup __INITDATA /* * Purpose : Function pointers used to access above functions - all calls * come through these */ .type arm740_processor_functions, #object ENTRY(arm740_processor_functions) .word v4t_late_abort .word legacy_pabort .word cpu_arm740_proc_init .word cpu_arm740_proc_fin .word cpu_arm740_reset .word cpu_arm740_do_idle .word cpu_arm740_dcache_clean_area .word cpu_arm740_switch_mm .word 0 @ cpu_*_set_pte .size arm740_processor_functions, . - arm740_processor_functions .section ".rodata" .type cpu_arch_name, #object cpu_arch_name: .asciz "armv4" .size cpu_arch_name, . - cpu_arch_name .type cpu_elf_name, #object cpu_elf_name: .asciz "v4" .size cpu_elf_name, . - cpu_elf_name .type cpu_arm740_name, #object cpu_arm740_name: .ascii "ARM740T" .size cpu_arm740_name, . - cpu_arm740_name .align .section ".proc.info.init", #alloc, #execinstr .type __arm740_proc_info,#object __arm740_proc_info: .long 0x41807400 .long 0xfffffff0 .long 0 b __arm740_setup .long cpu_arch_name .long cpu_elf_name .long HWCAP_SWP | HWCAP_HALF | HWCAP_26BIT .long cpu_arm740_name .long arm740_processor_functions .long 0 .long 0 .long v3_cache_fns @ cache model .size __arm740_proc_info, . - __arm740_proc_info