/* linux/arch/arm/mach-s3c2440/mach-osiris-dvs.c * * Copyright (c) 2009 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks * * Simtec Osiris Dynamic Voltage Scaling support. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ #include #include #include #include #include #include #include #define OSIRIS_GPIO_DVS S3C2410_GPB(5) static bool dvs_en; static void osiris_dvs_tps_setdvs(bool on) { unsigned vregs1 = 0, vdcdc2 = 0; if (!on) { vdcdc2 = TPS_VCORE_DISCH | TPS_LP_COREOFF; vregs1 = TPS_LDO1_OFF; /* turn off in low-power mode */ } dvs_en = on; vdcdc2 |= TPS_VCORE_1_3V | TPS_VCORE_LP_1_0V; vregs1 |= TPS_LDO2_ENABLE | TPS_LDO1_ENABLE; tps65010_config_vregs1(vregs1); tps65010_config_vdcdc2(vdcdc2); } static bool is_dvs(struct s3c_freq *f) { /* at the moment, we assume ARMCLK = HCLK => DVS */ return f->armclk == f->hclk; } /* keep track of current state */ static bool cur_dvs = false; static int osiris_dvs_notify(struct notifier_block *nb, unsigned long val, void *data) { struct cpufreq_freqs *cf = data; struct s3c_cpufreq_freqs *freqs = to_s3c_cpufreq(cf); bool old_dvs = is_dvs(&freqs->old); bool new_dvs = is_dvs(&freqs->new); int ret = 0; if (!dvs_en) return 0; printk(KERN_DEBUG "%s: old %ld,%ld new %ld,%ld\n", __func__, freqs->old.armclk, freqs->old.hclk, freqs->new.armclk, freqs->new.hclk); switch (val) { case CPUFREQ_PRECHANGE: if (old_dvs & !new_dvs || cur_dvs & !new_dvs) { pr_debug("%s: exiting dvs\n", __func__); cur_dvs = false; gpio_set_value(OSIRIS_GPIO_DVS, 1); } break; case CPUFREQ_POSTCHANGE: if (!old_dvs & new_dvs || !cur_dvs & new_dvs) { pr_debug("entering dvs\n"); cur_dvs = true; gpio_set_value(OSIRIS_GPIO_DVS, 0); } break; } return ret; } static struct notifier_block osiris_dvs_nb = { .notifier_call = osiris_dvs_notify, }; static int __devinit osiris_dvs_probe(struct platform_device *pdev) { int ret; dev_info(&pdev->dev, "initialising\n"); ret = gpio_request(OSIRIS_GPIO_DVS, "osiris-dvs"); if (ret) { dev_err(&pdev->dev, "cannot claim gpio\n"); goto err_nogpio; } /* start with dvs disabled */ gpio_direction_output(OSIRIS_GPIO_DVS, 1); ret = cpufreq_register_notifier(&osiris_dvs_nb, CPUFREQ_TRANSITION_NOTIFIER); if (ret) { dev_err(&pdev->dev, "failed to register with cpufreq\n"); goto err_nofreq; } osiris_dvs_tps_setdvs(true); return 0; err_nofreq: gpio_free(OSIRIS_GPIO_DVS); err_nogpio: return ret; } static int __devexit osiris_dvs_remove(struct platform_device *pdev) { dev_info(&pdev->dev, "exiting\n"); /* disable any current dvs */ gpio_set_value(OSIRIS_GPIO_DVS, 1); osiris_dvs_tps_setdvs(false); cpufreq_unregister_notifier(&osiris_dvs_nb, CPUFREQ_TRANSITION_NOTIFIER); gpio_free(OSIRIS_GPIO_DVS); return 0; } /* the CONFIG_PM block is so small, it isn't worth actaully compiling it * out if the configuration isn't set. */ static int osiris_dvs_suspend(struct device *dev) { gpio_set_value(OSIRIS_GPIO_DVS, 1); osiris_dvs_tps_setdvs(false); cur_dvs = false; return 0; } static int osiris_dvs_resume(struct device *dev) { osiris_dvs_tps_setdvs(true); return 0; } static const struct dev_pm_ops osiris_dvs_pm = { .suspend = osiris_dvs_suspend, .resume = osiris_dvs_resume, }; static struct platform_driver osiris_dvs_driver = { .probe = osiris_dvs_probe, .remove = __devexit_p(osiris_dvs_remove), .driver = { .name = "osiris-dvs", .owner = THIS_MODULE, .pm = &osiris_dvs_pm, }, }; static int __init osiris_dvs_init(void) { return platform_driver_register(&osiris_dvs_driver); } static void __exit osiris_dvs_exit(void) { platform_driver_unregister(&osiris_dvs_driver); } module_init(osiris_dvs_init); module_exit(osiris_dvs_exit); MODULE_DESCRIPTION("Simtec OSIRIS DVS support"); MODULE_AUTHOR("Ben Dooks "); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:osiris-dvs");