/* * arch/arm/mach-kirkwood/netxbig_v2-setup.c * * LaCie 2Big and 5Big Network v2 board setup * * Copyright (C) 2010 Simon Guinot * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include "common.h" #include "mpp.h" #include "lacie_v2-common.h" /***************************************************************************** * Ethernet ****************************************************************************/ static struct mv643xx_eth_platform_data netxbig_v2_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(8), }; static struct mv643xx_eth_platform_data netxbig_v2_ge01_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(0), }; /***************************************************************************** * SATA ****************************************************************************/ static struct mv_sata_platform_data netxbig_v2_sata_data = { .n_ports = 2, }; /***************************************************************************** * GPIO keys ****************************************************************************/ #define NETXBIG_V2_GPIO_SWITCH_POWER_ON 13 #define NETXBIG_V2_GPIO_SWITCH_POWER_OFF 15 #define NETXBIG_V2_GPIO_FUNC_BUTTON 34 #define NETXBIG_V2_SWITCH_POWER_ON 0x1 #define NETXBIG_V2_SWITCH_POWER_OFF 0x2 static struct gpio_keys_button netxbig_v2_buttons[] = { [0] = { .type = EV_SW, .code = NETXBIG_V2_SWITCH_POWER_ON, .gpio = NETXBIG_V2_GPIO_SWITCH_POWER_ON, .desc = "Back power switch (on|auto)", .active_low = 1, }, [1] = { .type = EV_SW, .code = NETXBIG_V2_SWITCH_POWER_OFF, .gpio = NETXBIG_V2_GPIO_SWITCH_POWER_OFF, .desc = "Back power switch (auto|off)", .active_low = 1, }, [2] = { .code = KEY_OPTION, .gpio = NETXBIG_V2_GPIO_FUNC_BUTTON, .desc = "Function button", .active_low = 1, }, }; static struct gpio_keys_platform_data netxbig_v2_button_data = { .buttons = netxbig_v2_buttons, .nbuttons = ARRAY_SIZE(netxbig_v2_buttons), }; static struct platform_device netxbig_v2_gpio_buttons = { .name = "gpio-keys", .id = -1, .dev = { .platform_data = &netxbig_v2_button_data, }, }; /***************************************************************************** * GPIO extension LEDs ****************************************************************************/ /* * The LEDs are controlled by a CPLD and can be configured through a GPIO * extension bus: * * - address register : bit [0-2] -> GPIO [47-49] * - data register : bit [0-2] -> GPIO [44-46] * - enable register : GPIO 29 */ static int netxbig_v2_gpio_ext_addr[] = { 47, 48, 49 }; static int netxbig_v2_gpio_ext_data[] = { 44, 45, 46 }; static struct netxbig_gpio_ext netxbig_v2_gpio_ext = { .addr = netxbig_v2_gpio_ext_addr, .num_addr = ARRAY_SIZE(netxbig_v2_gpio_ext_addr), .data = netxbig_v2_gpio_ext_data, .num_data = ARRAY_SIZE(netxbig_v2_gpio_ext_data), .enable = 29, }; /* * Address register selection: * * addr | register * ---------------------------- * 0 | front LED * 1 | front LED brightness * 2 | SATA LED brightness * 3 | SATA0 LED * 4 | SATA1 LED * 5 | SATA2 LED * 6 | SATA3 LED * 7 | SATA4 LED * * Data register configuration: * * data | LED brightness * ------------------------------------------------- * 0 | min (off) * - | - * 7 | max * * data | front LED mode * ------------------------------------------------- * 0 | fix off * 1 | fix blue on * 2 | fix red on * 3 | blink blue on=1 sec and blue off=1 sec * 4 | blink red on=1 sec and red off=1 sec * 5 | blink blue on=2.5 sec and red on=0.5 sec * 6 | blink blue on=1 sec and red on=1 sec * 7 | blink blue on=0.5 sec and blue off=2.5 sec * * data | SATA LED mode * ------------------------------------------------- * 0 | fix off * 1 | SATA activity blink * 2 | fix red on * 3 | blink blue on=1 sec and blue off=1 sec * 4 | blink red on=1 sec and red off=1 sec * 5 | blink blue on=2.5 sec and red on=0.5 sec * 6 | blink blue on=1 sec and red on=1 sec * 7 | fix blue on */ static int netxbig_v2_red_mled[NETXBIG_LED_MODE_NUM] = { [NETXBIG_LED_OFF] = 0, [NETXBIG_LED_ON] = 2, [NETXBIG_LED_SATA] = NETXBIG_LED_INVALID_MODE, [NETXBIG_LED_TIMER1] = 4, [NETXBIG_LED_TIMER2] = NETXBIG_LED_INVALID_MODE, }; static int netxbig_v2_blue_pwr_mled[NETXBIG_LED_MODE_NUM] = { [NETXBIG_LED_OFF] = 0, [NETXBIG_LED_ON] = 1, [NETXBIG_LED_SATA] = NETXBIG_LED_INVALID_MODE, [NETXBIG_LED_TIMER1] = 3, [NETXBIG_LED_TIMER2] = 7, }; static int netxbig_v2_blue_sata_mled[NETXBIG_LED_MODE_NUM] = { [NETXBIG_LED_OFF] = 0, [NETXBIG_LED_ON] = 7, [NETXBIG_LED_SATA] = 1, [NETXBIG_LED_TIMER1] = 3, [NETXBIG_LED_TIMER2] = NETXBIG_LED_INVALID_MODE, }; static struct netxbig_led_timer netxbig_v2_led_timer[] = { [0] = { .delay_on = 500, .delay_off = 500, .mode = NETXBIG_LED_TIMER1, }, [1] = { .delay_on = 500, .delay_off = 1000, .mode = NETXBIG_LED_TIMER2, }, }; #define NETXBIG_LED(_name, maddr, mval, baddr) \ { .name = _name, \ .mode_addr = maddr, \ .mode_val = mval, \ .bright_addr = baddr } static struct netxbig_led net2big_v2_leds_ctrl[] = { NETXBIG_LED("net2big-v2:blue:power", 0, netxbig_v2_blue_pwr_mled, 1), NETXBIG_LED("net2big-v2:red:power", 0, netxbig_v2_red_mled, 1), NETXBIG_LED("net2big-v2:blue:sata0", 3, netxbig_v2_blue_sata_mled, 2), NETXBIG_LED("net2big-v2:red:sata0", 3, netxbig_v2_red_mled, 2), NETXBIG_LED("net2big-v2:blue:sata1", 4, netxbig_v2_blue_sata_mled, 2), NETXBIG_LED("net2big-v2:red:sata1", 4, netxbig_v2_red_mled, 2), }; static struct netxbig_led_platform_data net2big_v2_leds_data = { .gpio_ext = &netxbig_v2_gpio_ext, .timer = netxbig_v2_led_timer, .num_timer = ARRAY_SIZE(netxbig_v2_led_timer), .leds = net2big_v2_leds_ctrl, .num_leds = ARRAY_SIZE(net2big_v2_leds_ctrl), }; static struct netxbig_led net5big_v2_leds_ctrl[] = { NETXBIG_LED("net5big-v2:blue:power", 0, netxbig_v2_blue_pwr_mled, 1), NETXBIG_LED("net5big-v2:red:power", 0, netxbig_v2_red_mled, 1), NETXBIG_LED("net5big-v2:blue:sata0", 3, netxbig_v2_blue_sata_mled, 2), NETXBIG_LED("net5big-v2:red:sata0", 3, netxbig_v2_red_mled, 2), NETXBIG_LED("net5big-v2:blue:sata1", 4, netxbig_v2_blue_sata_mled, 2), NETXBIG_LED("net5big-v2:red:sata1", 4, netxbig_v2_red_mled, 2), NETXBIG_LED("net5big-v2:blue:sata2", 5, netxbig_v2_blue_sata_mled, 2), NETXBIG_LED("net5big-v2:red:sata2", 5, netxbig_v2_red_mled, 2), NETXBIG_LED("net5big-v2:blue:sata3", 6, netxbig_v2_blue_sata_mled, 2), NETXBIG_LED("net5big-v2:red:sata3", 6, netxbig_v2_red_mled, 2), NETXBIG_LED("net5big-v2:blue:sata4", 7, netxbig_v2_blue_sata_mled, 2), NETXBIG_LED("net5big-v2:red:sata5", 7, netxbig_v2_red_mled, 2), }; static struct netxbig_led_platform_data net5big_v2_leds_data = { .gpio_ext = &netxbig_v2_gpio_ext, .timer = netxbig_v2_led_timer, .num_timer = ARRAY_SIZE(netxbig_v2_led_timer), .leds = net5big_v2_leds_ctrl, .num_leds = ARRAY_SIZE(net5big_v2_leds_ctrl), }; static struct platform_device netxbig_v2_leds = { .name = "leds-netxbig", .id = -1, .dev = { .platform_data = &net2big_v2_leds_data, }, }; /***************************************************************************** * General Setup ****************************************************************************/ static unsigned int net2big_v2_mpp_config[] __initdata = { MPP0_SPI_SCn, MPP1_SPI_MOSI, MPP2_SPI_SCK, MPP3_SPI_MISO, MPP6_SYSRST_OUTn, MPP7_GPO, /* Request power-off */ MPP8_TW0_SDA, MPP9_TW0_SCK, MPP10_UART0_TXD, MPP11_UART0_RXD, MPP13_GPIO, /* Rear power switch (on|auto) */ MPP14_GPIO, /* USB fuse alarm */ MPP15_GPIO, /* Rear power switch (auto|off) */ MPP16_GPIO, /* SATA HDD1 power */ MPP17_GPIO, /* SATA HDD2 power */ MPP20_SATA1_ACTn, MPP21_SATA0_ACTn, MPP24_GPIO, /* USB mode select */ MPP26_GPIO, /* USB device vbus */ MPP28_GPIO, /* USB enable host vbus */ MPP29_GPIO, /* GPIO extension ALE */ MPP34_GPIO, /* Rear Push button */ MPP35_GPIO, /* Inhibit switch power-off */ MPP36_GPIO, /* SATA HDD1 presence */ MPP37_GPIO, /* SATA HDD2 presence */ MPP40_GPIO, /* eSATA presence */ MPP44_GPIO, /* GPIO extension (data 0) */ MPP45_GPIO, /* GPIO extension (data 1) */ MPP46_GPIO, /* GPIO extension (data 2) */ MPP47_GPIO, /* GPIO extension (addr 0) */ MPP48_GPIO, /* GPIO extension (addr 1) */ MPP49_GPIO, /* GPIO extension (addr 2) */ 0 }; static unsigned int net5big_v2_mpp_config[] __initdata = { MPP0_SPI_SCn, MPP1_SPI_MOSI, MPP2_SPI_SCK, MPP3_SPI_MISO, MPP6_SYSRST_OUTn, MPP7_GPO, /* Request power-off */ MPP8_TW0_SDA, MPP9_TW0_SCK, MPP10_UART0_TXD, MPP11_UART0_RXD, MPP13_GPIO, /* Rear power switch (on|auto) */ MPP14_GPIO, /* USB fuse alarm */ MPP15_GPIO, /* Rear power switch (auto|off) */ MPP16_GPIO, /* SATA HDD1 power */ MPP17_GPIO, /* SATA HDD2 power */ MPP20_GE1_TXD0, MPP21_GE1_TXD1, MPP22_GE1_TXD2, MPP23_GE1_TXD3, MPP24_GE1_RXD0, MPP25_GE1_RXD1, MPP26_GE1_RXD2, MPP27_GE1_RXD3, MPP28_GPIO, /* USB enable host vbus */ MPP29_GPIO, /* GPIO extension ALE */ MPP30_GE1_RXCTL, MPP31_GE1_RXCLK, MPP32_GE1_TCLKOUT, MPP33_GE1_TXCTL, MPP34_GPIO, /* Rear Push button */ MPP35_GPIO, /* Inhibit switch power-off */ MPP36_GPIO, /* SATA HDD1 presence */ MPP37_GPIO, /* SATA HDD2 presence */ MPP38_GPIO, /* SATA HDD3 presence */ MPP39_GPIO, /* SATA HDD4 presence */ MPP40_GPIO, /* SATA HDD5 presence */ MPP41_GPIO, /* SATA HDD3 power */ MPP42_GPIO, /* SATA HDD4 power */ MPP43_GPIO, /* SATA HDD5 power */ MPP44_GPIO, /* GPIO extension (data 0) */ MPP45_GPIO, /* GPIO extension (data 1) */ MPP46_GPIO, /* GPIO extension (data 2) */ MPP47_GPIO, /* GPIO extension (addr 0) */ MPP48_GPIO, /* GPIO extension (addr 1) */ MPP49_GPIO, /* GPIO extension (addr 2) */ 0 }; #define NETXBIG_V2_GPIO_POWER_OFF 7 static void netxbig_v2_power_off(void) { gpio_set_value(NETXBIG_V2_GPIO_POWER_OFF, 1); } static void __init netxbig_v2_init(void) { /* * Basic setup. Needs to be called early. */ kirkwood_init(); if (machine_is_net2big_v2()) kirkwood_mpp_conf(net2big_v2_mpp_config); else kirkwood_mpp_conf(net5big_v2_mpp_config); if (machine_is_net2big_v2()) lacie_v2_hdd_power_init(2); else lacie_v2_hdd_power_init(5); kirkwood_ehci_init(); kirkwood_ge00_init(&netxbig_v2_ge00_data); if (machine_is_net5big_v2()) kirkwood_ge01_init(&netxbig_v2_ge01_data); kirkwood_sata_init(&netxbig_v2_sata_data); kirkwood_uart0_init(); lacie_v2_register_flash(); lacie_v2_register_i2c_devices(); if (machine_is_net5big_v2()) netxbig_v2_leds.dev.platform_data = &net5big_v2_leds_data; platform_device_register(&netxbig_v2_leds); platform_device_register(&netxbig_v2_gpio_buttons); if (gpio_request(NETXBIG_V2_GPIO_POWER_OFF, "power-off") == 0 && gpio_direction_output(NETXBIG_V2_GPIO_POWER_OFF, 0) == 0) pm_power_off = netxbig_v2_power_off; else pr_err("netxbig_v2: failed to configure power-off GPIO\n"); } #ifdef CONFIG_MACH_NET2BIG_V2 MACHINE_START(NET2BIG_V2, "LaCie 2Big Network v2") .boot_params = 0x00000100, .init_machine = netxbig_v2_init, .map_io = kirkwood_map_io, .init_irq = kirkwood_init_irq, .timer = &lacie_v2_timer, MACHINE_END #endif #ifdef CONFIG_MACH_NET5BIG_V2 MACHINE_START(NET5BIG_V2, "LaCie 5Big Network v2") .boot_params = 0x00000100, .init_machine = netxbig_v2_init, .map_io = kirkwood_map_io, .init_irq = kirkwood_init_irq, .timer = &lacie_v2_timer, MACHINE_END #endif