/* * TI CDCE949 clock synthesizer driver * * Note: This implementation assumes an input of 27MHz to the CDCE. * This is by no means constrained by CDCE hardware although the datasheet * does use this as an example for all illustrations and more importantly: * that is the crystal input on boards it is currently used on. * * Copyright (C) 2009 Texas Instruments Incorporated. http://www.ti.com/ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * */ #include #include #include #include #include #include #include "clock.h" static struct i2c_client *cdce_i2c_client; static DEFINE_MUTEX(cdce_mutex); /* CDCE register descriptor */ struct cdce_reg { u8 addr; u8 val; }; /* Per-Output (Y1, Y2 etc.) frequency descriptor */ struct cdce_freq { /* Frequency in KHz */ unsigned long frequency; /* * List of registers to program to obtain a particular frequency. * 0x0 in register address and value is the end of list marker. */ struct cdce_reg *reglist; }; #define CDCE_FREQ_TABLE_ENTRY(line, out) \ { \ .reglist = cdce_y ##line## _ ##out, \ .frequency = out, \ } /* List of CDCE outputs */ struct cdce_output { /* List of frequencies on this output */ struct cdce_freq *freq_table; /* Number of possible frequencies */ int size; }; /* * Finding out the values to program into CDCE949 registers for a particular * frequency output is not a simple calculation. Have a look at the datasheet * for the details. There is desktop software available to help users with * the calculations. Here, we just depend on the output of that software * (or hand calculations) instead trying to runtime calculate the register * values and inflicting misery on ourselves. */ static struct cdce_reg cdce_y1_148500[] = { { 0x13, 0x00 }, /* program PLL1_0 multiplier */ { 0x18, 0xaf }, { 0x19, 0x50 }, { 0x1a, 0x02 }, { 0x1b, 0xc9 }, /* program PLL1_11 multiplier */ { 0x1c, 0x00 }, { 0x1d, 0x40 }, { 0x1e, 0x02 }, { 0x1f, 0xc9 }, /* output state selection */ { 0x15, 0x00 }, { 0x14, 0xef }, /* switch MUX to PLL1 output */ { 0x14, 0x6f }, { 0x16, 0x06 }, /* set P2DIV divider, P3DIV and input crystal */ { 0x17, 0x06 }, { 0x01, 0x00 }, { 0x05, 0x48 }, { 0x02, 0x80 }, /* enable and disable PLL */ { 0x02, 0xbc }, { 0x03, 0x01 }, { }, }; static struct cdce_reg cdce_y1_74250[] = { { 0x13, 0x00 }, { 0x18, 0xaf }, { 0x19, 0x50 }, { 0x1a, 0x02 }, { 0x1b, 0xc9 }, { 0x1c, 0x00 }, { 0x1d, 0x40 }, { 0x1e, 0x02 }, { 0x1f, 0xc9 }, /* output state selection */ { 0x15, 0x00 }, { 0x14, 0xef }, /* switch MUX to PLL1 output */ { 0x14, 0x6f }, { 0x16, 0x06 }, /* set P2DIV divider, P3DIV and input crystal */ { 0x17, 0x06 }, { 0x01, 0x00 }, { 0x05, 0x48 }, { 0x02, 0x80 }, /* enable and disable PLL */ { 0x02, 0xbc }, { 0x03, 0x02 }, { }, }; static struct cdce_reg cdce_y1_27000[] = { { 0x13, 0x00 }, { 0x18, 0x00 }, { 0x19, 0x40 }, { 0x1a, 0x02 }, { 0x1b, 0x08 }, { 0x1c, 0x00 }, { 0x1d, 0x40 }, { 0x1e, 0x02 }, { 0x1f, 0x08 }, { 0x15, 0x02 }, { 0x14, 0xed }, { 0x16, 0x01 }, { 0x17, 0x01 }, { 0x01, 0x00 }, { 0x05, 0x50 }, { 0x02, 0xb4 }, { 0x03, 0x01 }, { }, }; static struct cdce_freq cdce_y1_freqs[] = { CDCE_FREQ_TABLE_ENTRY(1, 148500), CDCE_FREQ_TABLE_ENTRY(1, 74250), CDCE_FREQ_TABLE_ENTRY(1, 27000), }; static struct cdce_reg cdce_y5_13500[] = { { 0x27, 0x08 }, { 0x28, 0x00 }, { 0x29, 0x40 }, { 0x2a, 0x02 }, { 0x2b, 0x08 }, { 0x24, 0x6f }, { }, }; static struct cdce_reg cdce_y5_16875[] = { { 0x27, 0x08 }, { 0x28, 0x9f }, { 0x29, 0xb0 }, { 0x2a, 0x02 }, { 0x2b, 0x89 }, { 0x24, 0x6f }, { }, }; static struct cdce_reg cdce_y5_27000[] = { { 0x27, 0x04 }, { 0x28, 0x00 }, { 0x29, 0x40 }, { 0x2a, 0x02 }, { 0x2b, 0x08 }, { 0x24, 0x6f }, { }, }; static struct cdce_reg cdce_y5_54000[] = { { 0x27, 0x04 }, { 0x28, 0xff }, { 0x29, 0x80 }, { 0x2a, 0x02 }, { 0x2b, 0x07 }, { 0x24, 0x6f }, { }, }; static struct cdce_reg cdce_y5_81000[] = { { 0x27, 0x02 }, { 0x28, 0xbf }, { 0x29, 0xa0 }, { 0x2a, 0x03 }, { 0x2b, 0x0a }, { 0x24, 0x6f }, { }, }; static struct cdce_freq cdce_y5_freqs[] = { CDCE_FREQ_TABLE_ENTRY(5, 13500), CDCE_FREQ_TABLE_ENTRY(5, 16875), CDCE_FREQ_TABLE_ENTRY(5, 27000), CDCE_FREQ_TABLE_ENTRY(5, 54000), CDCE_FREQ_TABLE_ENTRY(5, 81000), }; static struct cdce_output output_list[] = { [1] = { cdce_y1_freqs, ARRAY_SIZE(cdce_y1_freqs) }, [5] = { cdce_y5_freqs, ARRAY_SIZE(cdce_y5_freqs) }, }; int cdce_set_rate(struct clk *clk, unsigned long rate) { int i, ret = 0; struct cdce_freq *freq_table = output_list[clk->lpsc].freq_table; struct cdce_reg *regs = NULL; if (!cdce_i2c_client) return -ENODEV; if (!freq_table) return -EINVAL; for (i = 0; i < output_list[clk->lpsc].size; i++) { if (freq_table[i].frequency == rate / 1000) { regs = freq_table[i].reglist; break; } } if (!regs) return -EINVAL; mutex_lock(&cdce_mutex); for (i = 0; regs[i].addr; i++) { ret = i2c_smbus_write_byte_data(cdce_i2c_client, regs[i].addr | 0x80, regs[i].val); if (ret) break; } mutex_unlock(&cdce_mutex); if (!ret) clk->rate = rate; return ret; } static int cdce_probe(struct i2c_client *client, const struct i2c_device_id *id) { cdce_i2c_client = client; return 0; } static int __devexit cdce_remove(struct i2c_client *client) { cdce_i2c_client = NULL; return 0; } static const struct i2c_device_id cdce_id[] = { {"cdce949", 0}, {}, }; MODULE_DEVICE_TABLE(i2c, cdce_id); static struct i2c_driver cdce_driver = { .driver = { .owner = THIS_MODULE, .name = "cdce949", }, .probe = cdce_probe, .remove = __devexit_p(cdce_remove), .id_table = cdce_id, }; static int __init cdce_init(void) { return i2c_add_driver(&cdce_driver); } subsys_initcall(cdce_init); static void __exit cdce_exit(void) { i2c_del_driver(&cdce_driver); } module_exit(cdce_exit); MODULE_AUTHOR("Texas Instruments"); MODULE_DESCRIPTION("CDCE949 clock synthesizer driver"); MODULE_LICENSE("GPL v2");