SI476x Driver Readme ------------------------------------------------ Copyright (C) 2013 Andrey Smirnov TODO for the driver ------------------------------ - According to the SiLabs' datasheet it is possible to update the firmware of the radio chip in the run-time, thus bringing it to the most recent version. Unfortunately I couldn't find any mentioning of the said firmware update for the old chips that I tested the driver against, so for chips like that the driver only exposes the old functionality. Parameters exposed over debugfs ------------------------------- SI476x allow user to get multiple characteristics that can be very useful for EoL testing/RF performance estimation, parameters that have very little to do with V4L2 subsystem. Such parameters are exposed via debugfs and can be accessed via regular file I/O operations. The drivers exposes following files: * /sys/kernel/debug//acf This file contains ACF(Automatically Controlled Features) status information. The contents of the file is binary data of the following layout: Offset | Name | Description ==================================================================== 0x00 | blend_int | Flag, set when stereo separation has | | crossed below the blend threshold -------------------------------------------------------------------- 0x01 | hblend_int | Flag, set when HiBlend cutoff | | frequency is lower than threshold -------------------------------------------------------------------- 0x02 | hicut_int | Flag, set when HiCut cutoff | | frequency is lower than threshold -------------------------------------------------------------------- 0x03 | chbw_int | Flag, set when channel filter | | bandwidth is less than threshold -------------------------------------------------------------------- 0x04 | softmute_int | Flag indicating that softmute | | attenuation has increased above | | softmute threshold -------------------------------------------------------------------- 0x05 | smute | 0 - Audio is not soft muted | | 1 - Audio is soft muted -------------------------------------------------------------------- 0x06 | smattn | Soft mute attenuation level in dB -------------------------------------------------------------------- 0x07 | chbw | Channel filter bandwidth in kHz -------------------------------------------------------------------- 0x08 | hicut | HiCut cutoff frequency in units of | | 100Hz -------------------------------------------------------------------- 0x09 | hiblend | HiBlend cutoff frequency in units | | of 100 Hz -------------------------------------------------------------------- 0x10 | pilot | 0 - Stereo pilot is not present | | 1 - Stereo pilot is present -------------------------------------------------------------------- 0x11 | stblend | Stereo blend in % -------------------------------------------------------------------- * /sys/kernel/debug//rds_blckcnt This file contains statistics about RDS receptions. It's binary data has the following layout: Offset | Name | Description ==================================================================== 0x00 | expected | Number of expected RDS blocks -------------------------------------------------------------------- 0x02 | received | Number of received RDS blocks -------------------------------------------------------------------- 0x04 | uncorrectable | Number of uncorrectable RDS blocks -------------------------------------------------------------------- * /sys/kernel/debug//agc This file contains information about parameters pertaining to AGC(Automatic Gain Control) The layout is: Offset | Name | Description ==================================================================== 0x00 | mxhi | 0 - FM Mixer PD high threshold is | | not tripped | | 1 - FM Mixer PD high threshold is | | tripped -------------------------------------------------------------------- 0x01 | mxlo | ditto for FM Mixer PD low -------------------------------------------------------------------- 0x02 | lnahi | ditto for FM LNA PD high -------------------------------------------------------------------- 0x03 | lnalo | ditto for FM LNA PD low -------------------------------------------------------------------- 0x04 | fmagc1 | FMAGC1 attenuator resistance | | (see datasheet for more detail) -------------------------------------------------------------------- 0x05 | fmagc2 | ditto for FMAGC2 -------------------------------------------------------------------- 0x06 | pgagain | PGA gain in dB -------------------------------------------------------------------- 0x07 | fmwblang | FM/WB LNA Gain in dB -------------------------------------------------------------------- * /sys/kernel/debug//rsq This file contains information about parameters pertaining to RSQ(Received Signal Quality) The layout is: Offset | Name | Description ==================================================================== 0x00 | multhint | 0 - multipath value has not crossed | | the Multipath high threshold | | 1 - multipath value has crossed | | the Multipath high threshold -------------------------------------------------------------------- 0x01 | multlint | ditto for Multipath low threshold -------------------------------------------------------------------- 0x02 | snrhint | 0 - received signal's SNR has not | | crossed high threshold | | 1 - received signal's SNR has | | crossed high threshold -------------------------------------------------------------------- 0x03 | snrlint | ditto for low threshold -------------------------------------------------------------------- 0x04 | rssihint | ditto for RSSI high threshold -------------------------------------------------------------------- 0x05 | rssilint | ditto for RSSI low threshold -------------------------------------------------------------------- 0x06 | bltf | Flag indicating if seek command | | reached/wrapped seek band limit -------------------------------------------------------------------- 0x07 | snr_ready | Indicates that SNR metrics is ready -------------------------------------------------------------------- 0x08 | rssiready | ditto for RSSI metrics -------------------------------------------------------------------- 0x09 | injside | 0 - Low-side injection is being used | | 1 - High-side injection is used -------------------------------------------------------------------- 0x10 | afcrl | Flag indicating if AFC rails -------------------------------------------------------------------- 0x11 | valid | Flag indicating if channel is valid -------------------------------------------------------------------- 0x12 | readfreq | Current tuned frequency -------------------------------------------------------------------- 0x14 | freqoff | Signed frequency offset in units of | | 2ppm -------------------------------------------------------------------- 0x15 | rssi | Signed value of RSSI in dBuV -------------------------------------------------------------------- 0x16 | snr | Signed RF SNR in dB -------------------------------------------------------------------- 0x17 | issi | Signed Image Strength Signal | | indicator -------------------------------------------------------------------- 0x18 | lassi | Signed Low side adjacent Channel | | Strength indicator -------------------------------------------------------------------- 0x19 | hassi | ditto fpr High side -------------------------------------------------------------------- 0x20 | mult | Multipath indicator -------------------------------------------------------------------- 0x21 | dev | Frequency deviation -------------------------------------------------------------------- 0x24 | assi | Adjacent channel SSI -------------------------------------------------------------------- 0x25 | usn | Ultrasonic noise indicator -------------------------------------------------------------------- 0x26 | pilotdev | Pilot deviation in units of 100 Hz -------------------------------------------------------------------- 0x27 | rdsdev | ditto for RDS -------------------------------------------------------------------- 0x28 | assidev | ditto for ASSI -------------------------------------------------------------------- 0x29 | strongdev | Frequency deviation -------------------------------------------------------------------- 0x30 | rdspi | RDS PI code -------------------------------------------------------------------- * /sys/kernel/debug//rsq_primary This file contains information about parameters pertaining to RSQ(Received Signal Quality) for primary tuner only. Layout is as the one above.