TODO ~~~~~~ Please pick something while reading :) - Implement streaming support for BULK endpoints Tatyana's patch "usb: Add streams support to the gadget framework" introduces streaming support for the gadget driver. Every usb_request has new field called stream_id which holds its id. Every usb_ep has a field num_supported_strms which describes the max number of streams supported (for this ep). UAS is AFAIK the only gadget with streaming support. - Convert interrupt handler to per-ep-thread-irq As it turns out some DWC3-commands ~1ms to complete. Currently we spin until the command completes which is bad. Implementation idea: - dwc core implements a demultiplexing irq chip for interrupts per endpoint. The interrupt numbers are allocated during probe and belong to the device. If MSI provides per-endpoint interrupt this dummy interrupt chip can be replaced with "real" interrupts. - interrupts are requested / allocated on usb_ep_enable() and removed on usb_ep_disable(). Worst case are 32 interrupts, the lower limit is two for ep0/1. - dwc3_send_gadget_ep_cmd() will sleep in wait_for_completion_timeout() until the command completes. - the interrupt handler is split into the following pieces: - primary handler of the device goes through every event and calls generic_handle_irq() for event it. On return from generic_handle_irq() in acknowledges the event counter so interrupt goes away (eventually). - threaded handler of the device none - primary handler of the EP-interrupt reads the event and tries to process it. Everything that requries sleeping is handed over to the Thread. The event is saved in an per-endpoint data-structure. We probably have to pay attention not to process events once we handed something to thread so we don't process event X prio Y where X > Y. - threaded handler of the EP-interrupt handles the remaining EP work which might sleep such as waiting for command completion. Latency: There should be no increase in latency since the interrupt-thread has a high priority and will be run before an average task in user land (except the user changed priorities).