Fax with isdn4linux =================== When enabled during kernel configuration, the tty emulator of the ISDN subsystem is capable of the Fax Class 2 commands. This only makes sense under the following conditions : - You need the commands as dummy, because you are using hylafax (with patch) for AVM capi. - You want to use the fax capabilities of your isdn-card. (supported cards are listed below) NOTE: This implementation does *not* support fax with passive ISDN-cards (known as softfax). The low-level driver of the ISDN-card and/or the card itself must support this. Supported ISDN-Cards -------------------- Eicon DIVA Server BRI/PCI - full support with both B-channels. Eicon DIVA Server 4BRI/PCI - full support with all B-channels. Eicon DIVA Server PRI/PCI - full support on amount of B-channels depending on DSPs on board. The command set is known as Class 2 (not Class 2.0) and can be activated by AT+FCLASS=2 The interface between the link-level-module and the hardware-level driver is described in the files INTERFACE.fax and INTERFACE. Armin mac@melware.de