From 21ed5574d1622118b49b0c6342acc8d27d0799be Mon Sep 17 00:00:00 2001 From: Len Brown Date: Mon, 19 Oct 2015 22:37:40 -0400 Subject: tools/power turbostat: simplify Bzy_MHz calculation Bzy_MHz = TSC_delta*tsc_tweak/APERF_delta/MPERF_delta/measurement_interval becomes Bzy_MHz = base_mhz/APERF_delta/MPERF_delta on systems which support MSR_NHM_PLATFORM_INFO. base_mhz is calculated directly from the base_ratio reported in MSR_NHM_PLATFORM_INFO * bclk, and bclk is discovered via MSR or cpuid. This reduces the dependency of Bzy_MHz calculation on the TSC. Previously, there were 4 TSC readings required in each caculation, the raw TSC delta combined with the measurement_interval. This also removes the "tsc_tweak" correction factor used when TSC runs on a different base clock from the CPU's bclk. After this change, tsc_tweak is used only for %Busy. The end-result should be a Bzy_MHz result slightly less prone to jitter. Signed-off-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 28 +++++++++++++++++----------- 1 file changed, 17 insertions(+), 11 deletions(-) (limited to 'tools') diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index bde0ef1..84ec4e4 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -75,6 +75,7 @@ unsigned int aperf_mperf_multiplier = 1; int do_smi; double bclk; double base_hz; +unsigned int has_base_hz; double tsc_tweak = 1.0; unsigned int show_pkg; unsigned int show_core; @@ -96,6 +97,7 @@ unsigned int do_ring_perf_limit_reasons; unsigned int crystal_hz; unsigned long long tsc_hz; int base_cpu; +double discover_bclk(unsigned int family, unsigned int model); #define RAPL_PKG (1 << 0) /* 0x610 MSR_PKG_POWER_LIMIT */ @@ -511,9 +513,13 @@ int format_counters(struct thread_data *t, struct core_data *c, } /* Bzy_MHz */ - if (has_aperf) - outp += sprintf(outp, "%8.0f", - 1.0 * t->tsc * tsc_tweak / units * t->aperf / t->mperf / interval_float); + if (has_aperf) { + if (has_base_hz) + outp += sprintf(outp, "%8.0f", base_hz / units * t->aperf / t->mperf); + else + outp += sprintf(outp, "%8.0f", + 1.0 * t->tsc / units * t->aperf / t->mperf / interval_float); + } /* TSC_MHz */ outp += sprintf(outp, "%8.0f", 1.0 * t->tsc/units/interval_float); @@ -1158,12 +1164,6 @@ int phi_pkg_cstate_limits[16] = {PCL__0, PCL__2, PCL_6N, PCL_6R, PCLRSV, PCLRSV, static void calculate_tsc_tweak() { - unsigned long long msr; - unsigned int base_ratio; - - get_msr(base_cpu, MSR_NHM_PLATFORM_INFO, &msr); - base_ratio = (msr >> 8) & 0xFF; - base_hz = base_ratio * bclk * 1000000; tsc_tweak = base_hz / tsc_hz; } @@ -1821,6 +1821,7 @@ void check_permissions() int probe_nhm_msrs(unsigned int family, unsigned int model) { unsigned long long msr; + unsigned int base_ratio; int *pkg_cstate_limits; if (!genuine_intel) @@ -1829,6 +1830,8 @@ int probe_nhm_msrs(unsigned int family, unsigned int model) if (family != 6) return 0; + bclk = discover_bclk(family, model); + switch (model) { case 0x1A: /* Core i7, Xeon 5500 series - Bloomfield, Gainstown NHM-EP */ case 0x1E: /* Core i7 and i5 Processor - Clarksfield, Lynnfield, Jasper Forest */ @@ -1871,9 +1874,13 @@ int probe_nhm_msrs(unsigned int family, unsigned int model) return 0; } get_msr(base_cpu, MSR_NHM_SNB_PKG_CST_CFG_CTL, &msr); - pkg_cstate_limit = pkg_cstate_limits[msr & 0xF]; + get_msr(base_cpu, MSR_NHM_PLATFORM_INFO, &msr); + base_ratio = (msr >> 8) & 0xFF; + + base_hz = base_ratio * bclk * 1000000; + has_base_hz = 1; return 1; } int has_nhm_turbo_ratio_limit(unsigned int family, unsigned int model) @@ -2780,7 +2787,6 @@ void process_cpuid() do_skl_residency = has_skl_msrs(family, model); do_slm_cstates = is_slm(family, model); do_knl_cstates = is_knl(family, model); - bclk = discover_bclk(family, model); rapl_probe(family, model); perf_limit_reasons_probe(family, model); -- cgit v1.1 From 759d2a932b82009a7039ef5567e7dcba153ce123 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Thu, 22 Oct 2015 02:42:12 -0400 Subject: tools/power turbostat: bugfix: print MAX_NON_TURBO_RATIO MSR_TURBO_ACTIVATION_RATIO: 0x00000016 (MAX_NON_TURBO_RATIO=6 lock=0) should print all 7 bits of MAX_NON_TURBO_RATIO (in decimal): MSR_TURBO_ACTIVATION_RATIO: 0x00000016 (MAX_NON_TURBO_RATIO=22 lock=0) Signed-off-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'tools') diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 84ec4e4..d8e4b20 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -1440,7 +1440,7 @@ dump_config_tdp(void) get_msr(base_cpu, MSR_TURBO_ACTIVATION_RATIO, &msr); fprintf(stderr, "cpu%d: MSR_TURBO_ACTIVATION_RATIO: 0x%08llx (", base_cpu, msr); - fprintf(stderr, "MAX_NON_TURBO_RATIO=%d", (unsigned int)(msr) & 0xEF); + fprintf(stderr, "MAX_NON_TURBO_RATIO=%d", (unsigned int)(msr) & 0x7F); fprintf(stderr, " lock=%d", (unsigned int)(msr >> 31) & 1); fprintf(stderr, ")\n"); } -- cgit v1.1 From 20102ac5bee3c7c1ffff43f220e37328b6fffd16 Mon Sep 17 00:00:00 2001 From: Jacob Tanenbaum Date: Thu, 22 Oct 2015 17:17:05 +0200 Subject: cpupower: cpupower monitor reports uninitialized values for offline cpus [root@hp-dl980g7-02 linux]# cpupower monitor ... 5472| 0| 1|******|******|******|******|| 0.00| 0.00| 0.00| 0.00| 0.00 *is offline 10567| 0| 159|******|******|******|******|| 0.00| 0.00| 0.00| 0.00| 0.00 *is offline 1661206560|859272560| 150|******|******|******|******|| 0.00| 0.00| 0.00| 0.00| 0.00 *is offline 1661206560|943093104| 140|******|******|******|******|| 0.00| 0.00| 0.00| 0.00| 0.00 *is offline because of this cpupower also holds the incorrect value for the number of physical packages in the machine Changed cpupower to initialize the values of an offline cpu's socket and core to -1, warn the user that one or more cpus is/are offline and not print statistics for offline cpus. This fix hides offlined cores where topology cannot be accessed. With a recent kernel patch suggested from Prarit Bhargava it may be possible that soft offlined cores' topology can still be parsed. This patch would then show which cores in which package/socket are offline, when sane toplogoy information is available. Signed-off-by: Jacob Tanenbaum Signed-off-by: Thomas Renninger Signed-off-by: Rafael J. Wysocki --- tools/power/cpupower/utils/helpers/topology.c | 23 ++++++++++++++-------- .../cpupower/utils/idle_monitor/cpupower-monitor.c | 9 ++++++++- 2 files changed, 23 insertions(+), 9 deletions(-) (limited to 'tools') diff --git a/tools/power/cpupower/utils/helpers/topology.c b/tools/power/cpupower/utils/helpers/topology.c index cea398c..9cbb7fd 100644 --- a/tools/power/cpupower/utils/helpers/topology.c +++ b/tools/power/cpupower/utils/helpers/topology.c @@ -73,18 +73,22 @@ int get_cpu_topology(struct cpupower_topology *cpu_top) for (cpu = 0; cpu < cpus; cpu++) { cpu_top->core_info[cpu].cpu = cpu; cpu_top->core_info[cpu].is_online = sysfs_is_cpu_online(cpu); - if (!cpu_top->core_info[cpu].is_online) - continue; if(sysfs_topology_read_file( cpu, "physical_package_id", - &(cpu_top->core_info[cpu].pkg)) < 0) - return -1; + &(cpu_top->core_info[cpu].pkg)) < 0) { + cpu_top->core_info[cpu].pkg = -1; + cpu_top->core_info[cpu].core = -1; + continue; + } if(sysfs_topology_read_file( cpu, "core_id", - &(cpu_top->core_info[cpu].core)) < 0) - return -1; + &(cpu_top->core_info[cpu].core)) < 0) { + cpu_top->core_info[cpu].pkg = -1; + cpu_top->core_info[cpu].core = -1; + continue; + } } qsort(cpu_top->core_info, cpus, sizeof(struct cpuid_core_info), @@ -95,12 +99,15 @@ int get_cpu_topology(struct cpupower_topology *cpu_top) done by pkg value. */ last_pkg = cpu_top->core_info[0].pkg; for(cpu = 1; cpu < cpus; cpu++) { - if(cpu_top->core_info[cpu].pkg != last_pkg) { + if (cpu_top->core_info[cpu].pkg != last_pkg && + cpu_top->core_info[cpu].pkg != -1) { + last_pkg = cpu_top->core_info[cpu].pkg; cpu_top->pkgs++; } } - cpu_top->pkgs++; + if (!cpu_top->core_info[0].pkg == -1) + cpu_top->pkgs++; /* Intel's cores count is not consecutively numbered, there may * be a core_id of 3, but none of 2. Assume there always is 0 diff --git a/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.c b/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.c index c4bae92..05f953f 100644 --- a/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.c +++ b/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.c @@ -143,6 +143,9 @@ void print_results(int topology_depth, int cpu) /* Be careful CPUs may got resorted for pkg value do not just use cpu */ if (!bitmask_isbitset(cpus_chosen, cpu_top.core_info[cpu].cpu)) return; + if (!cpu_top.core_info[cpu].is_online && + cpu_top.core_info[cpu].pkg == -1) + return; if (topology_depth > 2) printf("%4d|", cpu_top.core_info[cpu].pkg); @@ -191,7 +194,8 @@ void print_results(int topology_depth, int cpu) * It's up to the monitor plug-in to check .is_online, this one * is just for additional info. */ - if (!cpu_top.core_info[cpu].is_online) { + if (!cpu_top.core_info[cpu].is_online && + cpu_top.core_info[cpu].pkg != -1) { printf(_(" *is offline\n")); return; } else @@ -388,6 +392,9 @@ int cmd_monitor(int argc, char **argv) return EXIT_FAILURE; } + if (!cpu_top.core_info[0].is_online) + printf("WARNING: at least one cpu is offline\n"); + /* Default is: monitor all CPUs */ if (bitmask_isallclear(cpus_chosen)) bitmask_setall(cpus_chosen); -- cgit v1.1 From 645209472d909071df5af2c42ea623ef011ad3c8 Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Thu, 22 Oct 2015 17:17:06 +0200 Subject: cpupower: Remove debug message when using cpupower idle-set -D switch Signed-off-by: Thomas Renninger Signed-off-by: Rafael J. Wysocki --- tools/power/cpupower/utils/cpuidle-set.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'tools') diff --git a/tools/power/cpupower/utils/cpuidle-set.c b/tools/power/cpupower/utils/cpuidle-set.c index d45d8d7..9a9b7a3 100644 --- a/tools/power/cpupower/utils/cpuidle-set.c +++ b/tools/power/cpupower/utils/cpuidle-set.c @@ -148,8 +148,6 @@ int cmd_idle_set(int argc, char **argv) (cpu, idlestate); state_latency = sysfs_get_idlestate_latency (cpu, idlestate); - printf("CPU: %u - idlestate %u - state_latency: %llu - latency: %llu\n", - cpu, idlestate, state_latency, latency); if (disabled == 1 || latency > state_latency) continue; ret = sysfs_idlestate_disable -- cgit v1.1 From 19c9fb896f54ade387676f134ce1de9bcd3cd478 Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Thu, 22 Oct 2015 17:17:07 +0200 Subject: cpupower: Enable disabled Cstates if they are below max latency cpupower idle-set -D currently only disables all C-states that have a higher latency than the specified . But if deep sleep states were already disabled and have a lower latency, they should get enabled again. For example: This call: cpupower idle-set -D 30 disables all C-states with a higher or equal latency than 30. If one then calls: cpupower idle-set -D 100 C-states with a latency between 30-99 will get enabled again with this patch now. It is ensured that only C-states with a latency of 100 and higher are disabled. Signed-off-by: Thomas Renninger Signed-off-by: Rafael J. Wysocki --- tools/power/cpupower/man/cpupower-idle-set.1 | 4 +++- tools/power/cpupower/utils/cpuidle-set.c | 17 +++++++++++++---- 2 files changed, 16 insertions(+), 5 deletions(-) (limited to 'tools') diff --git a/tools/power/cpupower/man/cpupower-idle-set.1 b/tools/power/cpupower/man/cpupower-idle-set.1 index 3e6799d..580c4e3 100644 --- a/tools/power/cpupower/man/cpupower-idle-set.1 +++ b/tools/power/cpupower/man/cpupower-idle-set.1 @@ -20,7 +20,9 @@ Disable a specific processor sleep state. Enable a specific processor sleep state. .TP \fB\-D\fR \fB\-\-disable-by-latency\fR -Disable all idle states with a equal or higher latency than +Disable all idle states with a equal or higher latency than . + +Enable all idle states with a latency lower than . .TP \fB\-E\fR \fB\-\-enable-all\fR Enable all idle states if not enabled already. diff --git a/tools/power/cpupower/utils/cpuidle-set.c b/tools/power/cpupower/utils/cpuidle-set.c index 9a9b7a3..eaea130 100644 --- a/tools/power/cpupower/utils/cpuidle-set.c +++ b/tools/power/cpupower/utils/cpuidle-set.c @@ -148,12 +148,21 @@ int cmd_idle_set(int argc, char **argv) (cpu, idlestate); state_latency = sysfs_get_idlestate_latency (cpu, idlestate); - if (disabled == 1 || latency > state_latency) + if (disabled == 1) { + if (latency > state_latency){ + ret = sysfs_idlestate_disable + (cpu, idlestate, 0); + if (ret == 0) + printf(_("Idlestate %u enabled on CPU %u\n"), idlestate, cpu); + } continue; - ret = sysfs_idlestate_disable - (cpu, idlestate, 1); - if (ret == 0) + } + if (latency <= state_latency){ + ret = sysfs_idlestate_disable + (cpu, idlestate, 1); + if (ret == 0) printf(_("Idlestate %u disabled on CPU %u\n"), idlestate, cpu); + } } break; case 'E': -- cgit v1.1 From 57ab3b08725163bfe385aaeea6837f9b1213af3d Mon Sep 17 00:00:00 2001 From: Sriram Raghunathan Date: Fri, 23 Oct 2015 09:52:45 +0200 Subject: Creating a common structure initialization pattern for struct option This patch tries to creates a common structure initialization within the cpupower tool. Previously the ``struct option`` was initialized using `designated initializer` technique which was not needed. There were conflicting initialization methods seen with bench/main.c & others. Signed-off-by: Sriram Raghunathan Signed-off-by: Thomas Renninger Signed-off-by: Rafael J. Wysocki --- tools/power/cpupower/debug/i386/dump_psb.c | 2 +- tools/power/cpupower/utils/cpufreq-info.c | 30 +++++++++++++++--------------- tools/power/cpupower/utils/cpufreq-set.c | 10 +++++----- tools/power/cpupower/utils/cpuidle-info.c | 4 ++-- tools/power/cpupower/utils/cpuidle-set.c | 14 +++++--------- tools/power/cpupower/utils/cpupower-info.c | 4 ++-- tools/power/cpupower/utils/cpupower-set.c | 2 +- 7 files changed, 31 insertions(+), 35 deletions(-) (limited to 'tools') diff --git a/tools/power/cpupower/debug/i386/dump_psb.c b/tools/power/cpupower/debug/i386/dump_psb.c index 8d6a475..2c768cf 100644 --- a/tools/power/cpupower/debug/i386/dump_psb.c +++ b/tools/power/cpupower/debug/i386/dump_psb.c @@ -134,7 +134,7 @@ next_one: } static struct option info_opts[] = { - {.name = "numpst", .has_arg=no_argument, .flag=NULL, .val='n'}, + {"numpst", no_argument, NULL, 'n'}, }; void print_help(void) diff --git a/tools/power/cpupower/utils/cpufreq-info.c b/tools/power/cpupower/utils/cpufreq-info.c index b4b90a9..0e67643 100644 --- a/tools/power/cpupower/utils/cpufreq-info.c +++ b/tools/power/cpupower/utils/cpufreq-info.c @@ -536,21 +536,21 @@ static int get_latency(unsigned int cpu, unsigned int human) } static struct option info_opts[] = { - { .name = "debug", .has_arg = no_argument, .flag = NULL, .val = 'e'}, - { .name = "boost", .has_arg = no_argument, .flag = NULL, .val = 'b'}, - { .name = "freq", .has_arg = no_argument, .flag = NULL, .val = 'f'}, - { .name = "hwfreq", .has_arg = no_argument, .flag = NULL, .val = 'w'}, - { .name = "hwlimits", .has_arg = no_argument, .flag = NULL, .val = 'l'}, - { .name = "driver", .has_arg = no_argument, .flag = NULL, .val = 'd'}, - { .name = "policy", .has_arg = no_argument, .flag = NULL, .val = 'p'}, - { .name = "governors", .has_arg = no_argument, .flag = NULL, .val = 'g'}, - { .name = "related-cpus", .has_arg = no_argument, .flag = NULL, .val = 'r'}, - { .name = "affected-cpus",.has_arg = no_argument, .flag = NULL, .val = 'a'}, - { .name = "stats", .has_arg = no_argument, .flag = NULL, .val = 's'}, - { .name = "latency", .has_arg = no_argument, .flag = NULL, .val = 'y'}, - { .name = "proc", .has_arg = no_argument, .flag = NULL, .val = 'o'}, - { .name = "human", .has_arg = no_argument, .flag = NULL, .val = 'm'}, - { .name = "no-rounding", .has_arg = no_argument, .flag = NULL, .val = 'n'}, + {"debug", no_argument, NULL, 'e'}, + {"boost", no_argument, NULL, 'b'}, + {"freq", no_argument, NULL, 'f'}, + {"hwfreq", no_argument, NULL, 'w'}, + {"hwlimits", no_argument, NULL, 'l'}, + {"driver", no_argument, NULL, 'd'}, + {"policy", no_argument, NULL, 'p'}, + {"governors", no_argument, NULL, 'g'}, + {"related-cpus", no_argument, NULL, 'r'}, + {"affected-cpus", no_argument, NULL, 'a'}, + {"stats", no_argument, NULL, 's'}, + {"latency", no_argument, NULL, 'y'}, + {"proc", no_argument, NULL, 'o'}, + {"human", no_argument, NULL, 'm'}, + {"no-rounding", no_argument, NULL, 'n'}, { }, }; diff --git a/tools/power/cpupower/utils/cpufreq-set.c b/tools/power/cpupower/utils/cpufreq-set.c index 4e21357..0fbd1a2 100644 --- a/tools/power/cpupower/utils/cpufreq-set.c +++ b/tools/power/cpupower/utils/cpufreq-set.c @@ -22,11 +22,11 @@ #define NORM_FREQ_LEN 32 static struct option set_opts[] = { - { .name = "min", .has_arg = required_argument, .flag = NULL, .val = 'd'}, - { .name = "max", .has_arg = required_argument, .flag = NULL, .val = 'u'}, - { .name = "governor", .has_arg = required_argument, .flag = NULL, .val = 'g'}, - { .name = "freq", .has_arg = required_argument, .flag = NULL, .val = 'f'}, - { .name = "related", .has_arg = no_argument, .flag = NULL, .val='r'}, + {"min", required_argument, NULL, 'd'}, + {"max", required_argument, NULL, 'u'}, + {"governor", required_argument, NULL, 'g'}, + {"freq", required_argument, NULL, 'f'}, + {"related", no_argument, NULL, 'r'}, { }, }; diff --git a/tools/power/cpupower/utils/cpuidle-info.c b/tools/power/cpupower/utils/cpuidle-info.c index 75e66de..750c1d8 100644 --- a/tools/power/cpupower/utils/cpuidle-info.c +++ b/tools/power/cpupower/utils/cpuidle-info.c @@ -126,8 +126,8 @@ static void proc_cpuidle_cpu_output(unsigned int cpu) } static struct option info_opts[] = { - { .name = "silent", .has_arg = no_argument, .flag = NULL, .val = 's'}, - { .name = "proc", .has_arg = no_argument, .flag = NULL, .val = 'o'}, + {"silent", no_argument, NULL, 's'}, + {"proc", no_argument, NULL, 'o'}, { }, }; diff --git a/tools/power/cpupower/utils/cpuidle-set.c b/tools/power/cpupower/utils/cpuidle-set.c index eaea130..d6b6ae4 100644 --- a/tools/power/cpupower/utils/cpuidle-set.c +++ b/tools/power/cpupower/utils/cpuidle-set.c @@ -13,15 +13,11 @@ #include "helpers/sysfs.h" static struct option info_opts[] = { - { .name = "disable", - .has_arg = required_argument, .flag = NULL, .val = 'd'}, - { .name = "enable", - .has_arg = required_argument, .flag = NULL, .val = 'e'}, - { .name = "disable-by-latency", - .has_arg = required_argument, .flag = NULL, .val = 'D'}, - { .name = "enable-all", - .has_arg = no_argument, .flag = NULL, .val = 'E'}, - { }, + {"disable", required_argument, NULL, 'd'}, + {"enable", required_argument, NULL, 'e'}, + {"disable-by-latency", required_argument, NULL, 'D'}, + {"enable-all", no_argument, NULL, 'E'}, + { }, }; diff --git a/tools/power/cpupower/utils/cpupower-info.c b/tools/power/cpupower/utils/cpupower-info.c index 136d979..10299f2 100644 --- a/tools/power/cpupower/utils/cpupower-info.c +++ b/tools/power/cpupower/utils/cpupower-info.c @@ -17,8 +17,8 @@ #include "helpers/sysfs.h" static struct option set_opts[] = { - { .name = "perf-bias", .has_arg = optional_argument, .flag = NULL, .val = 'b'}, - { }, + {"perf-bias", optional_argument, NULL, 'b'}, + { }, }; static void print_wrong_arg_exit(void) diff --git a/tools/power/cpupower/utils/cpupower-set.c b/tools/power/cpupower/utils/cpupower-set.c index 573c75f..3e6f374 100644 --- a/tools/power/cpupower/utils/cpupower-set.c +++ b/tools/power/cpupower/utils/cpupower-set.c @@ -18,7 +18,7 @@ #include "helpers/bitmask.h" static struct option set_opts[] = { - { .name = "perf-bias", .has_arg = required_argument, .flag = NULL, .val = 'b'}, + {"perf-bias", required_argument, NULL, 'b'}, { }, }; -- cgit v1.1