From a975873a9acc0788c1aee5ca183deb420b5c00e5 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Thu, 27 Jun 2013 21:59:11 +0200 Subject: ASoC: tas5086: fix Mid-Z implementation It turns out that the TAS5086 doesn't like channel start parts to be empty, and if all channels are configured to Mid-Z, part 1 has to be used. Signed-off-by: Daniel Mack Signed-off-by: Mark Brown --- sound/soc/codecs/tas5086.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) (limited to 'sound') diff --git a/sound/soc/codecs/tas5086.c b/sound/soc/codecs/tas5086.c index 8bbdf25..6d31d88 100644 --- a/sound/soc/codecs/tas5086.c +++ b/sound/soc/codecs/tas5086.c @@ -721,7 +721,7 @@ static int tas5086_probe(struct snd_soc_codec *codec) { struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec); int charge_period = 1300000; /* hardware default is 1300 ms */ - u8 pwm_start = TAS5086_PWM_START_CHANNEL_MASK; + u8 pwm_start_mid_z = 0; int i, ret; if (of_match_device(of_match_ptr(tas5086_dt_ids), codec->dev)) { @@ -735,16 +735,19 @@ static int tas5086_probe(struct snd_soc_codec *codec) "ti,mid-z-channel-%d", i + 1); if (of_get_property(of_node, name, NULL) != NULL) - pwm_start &= ~(1 << i); + pwm_start_mid_z |= 1 << i; } } /* - * Configure 'part 2' of the PWM starts to always use MID-Z, and tell - * all configured mid-z channels to start start under 'part 2'. + * If any of the channels is configured to start in Mid-Z mode, + * configure 'part 1' of the PWM starts to use Mid-Z, and tell + * all configured mid-z channels to start start under 'part 1'. */ - regmap_write(priv->regmap, TAS5086_PWM_START, - TAS5086_PWM_START_MIDZ_FOR_START_2 | pwm_start); + if (pwm_start_mid_z) + regmap_write(priv->regmap, TAS5086_PWM_START, + TAS5086_PWM_START_MIDZ_FOR_START_1 | + pwm_start_mid_z); /* lookup and set split-capacitor charge period */ if (charge_period == 0) { -- cgit v1.1