From 690a863ff03d9a29ace2b752b8f802fba78a842f Mon Sep 17 00:00:00 2001 From: Torstein Hegge Date: Tue, 26 Mar 2013 22:10:05 +0100 Subject: ALSA: usb: Work around CM6631 sample rate change bug The C-Media CM6631 USB receiver doesn't respond to changes in sample rate while the interface is active. The same behavior is observed in other UAC2 hardware like the VIA VT1731. Reset the interface after setting the sampling frequency on sample rate changes, to ensure that the sample rate set by snd_usb_init_sample_rate() is used. Otherwise, the device will try to use the sample rate of the previous stream, causing distorted sound on sample rate changes. The reset is performed for all UAC2 devices, as it should not affect a standards compliant device, but it is only necessary for C-Media CM6631, VIA VT1731 and possibly others. Failure to read sample rate from the device is not handled as an error in set_sample_rate_v2(), as (permanent or intermittent) failure to read sample rate isn't essential for a successful sample rate set. Signed-off-by: Torstein Hegge Acked-by: Clemens Ladisch Signed-off-by: Takashi Iwai --- sound/usb/clock.c | 45 +++++++++++++++++++++++++++++++++++---------- 1 file changed, 35 insertions(+), 10 deletions(-) (limited to 'sound/usb') diff --git a/sound/usb/clock.c b/sound/usb/clock.c index 5e634a2..9e2703a 100644 --- a/sound/usb/clock.c +++ b/sound/usb/clock.c @@ -253,7 +253,7 @@ static int set_sample_rate_v2(struct snd_usb_audio *chip, int iface, { struct usb_device *dev = chip->dev; unsigned char data[4]; - int err, crate; + int err, cur_rate, prev_rate; int clock = snd_usb_clock_find_source(chip, fmt->clock); if (clock < 0) @@ -266,6 +266,19 @@ static int set_sample_rate_v2(struct snd_usb_audio *chip, int iface, return -ENXIO; } + err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_CUR, + USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN, + UAC2_CS_CONTROL_SAM_FREQ << 8, + snd_usb_ctrl_intf(chip) | (clock << 8), + data, sizeof(data)); + if (err < 0) { + snd_printk(KERN_WARNING "%d:%d:%d: cannot get freq (v2)\n", + dev->devnum, iface, fmt->altsetting); + prev_rate = 0; + } else { + prev_rate = data[0] | (data[1] << 8) | (data[2] << 16) | (data[3] << 24); + } + data[0] = rate; data[1] = rate >> 8; data[2] = rate >> 16; @@ -280,19 +293,31 @@ static int set_sample_rate_v2(struct snd_usb_audio *chip, int iface, return err; } - if ((err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_CUR, - USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN, - UAC2_CS_CONTROL_SAM_FREQ << 8, - snd_usb_ctrl_intf(chip) | (clock << 8), - data, sizeof(data))) < 0) { + err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_CUR, + USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN, + UAC2_CS_CONTROL_SAM_FREQ << 8, + snd_usb_ctrl_intf(chip) | (clock << 8), + data, sizeof(data)); + if (err < 0) { snd_printk(KERN_WARNING "%d:%d:%d: cannot get freq (v2)\n", dev->devnum, iface, fmt->altsetting); - return err; + cur_rate = 0; + } else { + cur_rate = data[0] | (data[1] << 8) | (data[2] << 16) | (data[3] << 24); } - crate = data[0] | (data[1] << 8) | (data[2] << 16) | (data[3] << 24); - if (crate != rate) - snd_printd(KERN_WARNING "current rate %d is different from the runtime rate %d\n", crate, rate); + if (cur_rate != rate) { + snd_printd(KERN_WARNING + "current rate %d is different from the runtime rate %d\n", + cur_rate, rate); + } + + /* Some devices doesn't respond to sample rate changes while the + * interface is active. */ + if (rate != prev_rate) { + usb_set_interface(dev, iface, 0); + usb_set_interface(dev, iface, fmt->altsetting); + } return 0; } -- cgit v1.1 From 889d66848b12d891248b03abcb2a42047f8e172a Mon Sep 17 00:00:00 2001 From: Eldad Zack Date: Fri, 5 Apr 2013 20:49:46 +0200 Subject: ALSA: usb-audio: fix endianness bug in snd_nativeinstruments_* The usb_control_msg() function expects __u16 types and performs the endianness conversions by itself. However, in three places, a conversion is performed before it is handed over to usb_control_msg(), which leads to a double conversion (= no conversion): * snd_usb_nativeinstruments_boot_quirk() * snd_nativeinstruments_control_get() * snd_nativeinstruments_control_put() Caught by sparse: sound/usb/mixer_quirks.c:512:38: warning: incorrect type in argument 6 (different base types) sound/usb/mixer_quirks.c:512:38: expected unsigned short [unsigned] [usertype] index sound/usb/mixer_quirks.c:512:38: got restricted __le16 [usertype] sound/usb/mixer_quirks.c:543:35: warning: incorrect type in argument 5 (different base types) sound/usb/mixer_quirks.c:543:35: expected unsigned short [unsigned] [usertype] value sound/usb/mixer_quirks.c:543:35: got restricted __le16 [usertype] sound/usb/mixer_quirks.c:543:56: warning: incorrect type in argument 6 (different base types) sound/usb/mixer_quirks.c:543:56: expected unsigned short [unsigned] [usertype] index sound/usb/mixer_quirks.c:543:56: got restricted __le16 [usertype] sound/usb/quirks.c:502:35: warning: incorrect type in argument 5 (different base types) sound/usb/quirks.c:502:35: expected unsigned short [unsigned] [usertype] value sound/usb/quirks.c:502:35: got restricted __le16 [usertype] Signed-off-by: Eldad Zack Acked-by: Daniel Mack Cc: Signed-off-by: Takashi Iwai --- sound/usb/mixer_quirks.c | 4 ++-- sound/usb/quirks.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'sound/usb') diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c index 497d274..ebe9144 100644 --- a/sound/usb/mixer_quirks.c +++ b/sound/usb/mixer_quirks.c @@ -509,7 +509,7 @@ static int snd_nativeinstruments_control_get(struct snd_kcontrol *kcontrol, else ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), bRequest, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - 0, cpu_to_le16(wIndex), + 0, wIndex, &tmp, sizeof(tmp), 1000); up_read(&mixer->chip->shutdown_rwsem); @@ -540,7 +540,7 @@ static int snd_nativeinstruments_control_put(struct snd_kcontrol *kcontrol, else ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), bRequest, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, - cpu_to_le16(wValue), cpu_to_le16(wIndex), + wValue, wIndex, NULL, 0, 1000); up_read(&mixer->chip->shutdown_rwsem); diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index 5325a38..9c5ab22 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -486,7 +486,7 @@ static int snd_usb_nativeinstruments_boot_quirk(struct usb_device *dev) { int ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), 0xaf, USB_TYPE_VENDOR | USB_RECIP_DEVICE, - cpu_to_le16(1), 0, NULL, 0, 1000); + 1, 0, NULL, 0, 1000); if (ret < 0) return ret; -- cgit v1.1