From c9e065c27fe9b81e5d6e7681d77a24f7b9616675 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Sun, 4 May 2014 19:17:05 +0200 Subject: ASoC: dapm: Make sure to always update the DAPM graph in _put_volsw() When using auto-muted controls it may happen that the register value will not change when changing a control from enabled to disabled (since the control might be physically disabled due to the auto-muting). We have to make sure to still update the DAPM graph and disconnect the mixer input. Fixes: commit 5729507 ("ASoC: dapm: Implement mixer input auto-disable") Signed-off-by: Lars-Peter Clausen Signed-off-by: Mark Brown --- sound/soc/soc-dapm.c | 23 ++++++++++------------- 1 file changed, 10 insertions(+), 13 deletions(-) (limited to 'sound/soc/soc-dapm.c') diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index 1e171bd..fb6c7b7 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -2792,22 +2792,19 @@ int snd_soc_dapm_put_volsw(struct snd_kcontrol *kcontrol, mutex_lock_nested(&card->dapm_mutex, SND_SOC_DAPM_CLASS_RUNTIME); change = dapm_kcontrol_set_value(kcontrol, val); - - if (reg != SND_SOC_NOPM) { - mask = mask << shift; - val = val << shift; - - change = snd_soc_test_bits(codec, reg, mask, val); - } - if (change) { if (reg != SND_SOC_NOPM) { - update.kcontrol = kcontrol; - update.reg = reg; - update.mask = mask; - update.val = val; + mask = mask << shift; + val = val << shift; + + if (snd_soc_test_bits(codec, reg, mask, val)) { + update.kcontrol = kcontrol; + update.reg = reg; + update.mask = mask; + update.val = val; + card->update = &update; + } - card->update = &update; } ret = soc_dapm_mixer_update_power(card, kcontrol, connect); -- cgit v1.1