From 13447cdc76a8c0a57c9b3395d896b01feb82f34b Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 30 Jun 2014 10:01:39 +0200 Subject: ASoC: s6105-ipcam: Automatically disconnect non-connected pins All CODEC input and output widgets are either in the DAPM routing table or manually marked as non-connected. This means the card is fully routed and we can let the core take care of disconnecting non-connected pins. Signed-off-by: Lars-Peter Clausen Signed-off-by: Mark Brown --- sound/soc/s6000/s6105-ipcam.c | 15 +-------------- 1 file changed, 1 insertion(+), 14 deletions(-) (limited to 'sound/soc/s6000') diff --git a/sound/soc/s6000/s6105-ipcam.c b/sound/soc/s6000/s6105-ipcam.c index 50875e6..3510c01 100644 --- a/sound/soc/s6000/s6105-ipcam.c +++ b/sound/soc/s6000/s6105-ipcam.c @@ -133,22 +133,8 @@ static const struct snd_kcontrol_new audio_out_mux = { /* Logic for a aic3x as connected on the s6105 ip camera ref design */ static int s6105_aic3x_init(struct snd_soc_pcm_runtime *rtd) { - struct snd_soc_codec *codec = rtd->codec; - struct snd_soc_dapm_context *dapm = &codec->dapm; struct snd_soc_card *card = rtd->card; - /* not present */ - snd_soc_dapm_nc_pin(dapm, "MONO_LOUT"); - snd_soc_dapm_nc_pin(dapm, "LINE2L"); - snd_soc_dapm_nc_pin(dapm, "LINE2R"); - - /* not connected */ - snd_soc_dapm_nc_pin(dapm, "MIC3L"); /* LINE2L on this chip */ - snd_soc_dapm_nc_pin(dapm, "MIC3R"); /* LINE2R on this chip */ - snd_soc_dapm_nc_pin(dapm, "LLOUT"); - snd_soc_dapm_nc_pin(dapm, "RLOUT"); - snd_soc_dapm_nc_pin(dapm, "HPRCOM"); - /* must correspond to audio_out_mux.private_value initializer */ snd_soc_dapm_disable_pin(&card->dapm, "Audio Out Differential"); @@ -180,6 +166,7 @@ static struct snd_soc_card snd_soc_card_s6105 = { .num_dapm_widgets = ARRAY_SIZE(aic3x_dapm_widgets), .dapm_routes = audio_map, .num_dapm_routes = ARRAY_SIZE(audio_map), + .fully_routed = true, }; static struct s6000_snd_platform_data s6105_snd_data __initdata = { -- cgit v1.1