From fff3dd40132d6106d4d2a61e70e782f82394fd17 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Mon, 31 Dec 2012 11:51:47 +0100 Subject: ASoC: sdp3430: No need to configure pin mux for extmute The codec driver takes care of this. Signed-off-by: Peter Ujfalusi Signed-off-by: Mark Brown --- sound/soc/omap/sdp3430.c | 18 ------------------ 1 file changed, 18 deletions(-) (limited to 'sound/soc/omap') diff --git a/sound/soc/omap/sdp3430.c b/sound/soc/omap/sdp3430.c index f2e2651..216cbdd 100644 --- a/sound/soc/omap/sdp3430.c +++ b/sound/soc/omap/sdp3430.c @@ -24,7 +24,6 @@ #include #include -#include #include #include #include @@ -32,20 +31,12 @@ #include #include -#include -/* Register descriptions for twl4030 codec part */ -#include #include #include "omap-mcbsp.h" #include "omap-pcm.h" -/* TWL4030 PMBR1 Register */ -#define TWL4030_INTBR_PMBR1 0x0D -/* TWL4030 PMBR1 Register GPIO6 mux bit */ -#define TWL4030_GPIO6_PWM0_MUTE(value) (value << 2) - static struct snd_soc_card snd_soc_sdp3430; static int sdp3430_hw_params(struct snd_pcm_substream *substream, @@ -212,7 +203,6 @@ static struct platform_device *sdp3430_snd_device; static int __init sdp3430_soc_init(void) { int ret; - u8 pin_mux; if (!machine_is_omap_3430sdp()) return -ENODEV; @@ -226,14 +216,6 @@ static int __init sdp3430_soc_init(void) platform_set_drvdata(sdp3430_snd_device, &snd_soc_sdp3430); - /* Set TWL4030 GPIO6 as EXTMUTE signal */ - twl_i2c_read_u8(TWL4030_MODULE_INTBR, &pin_mux, - TWL4030_INTBR_PMBR1); - pin_mux &= ~TWL4030_GPIO6_PWM0_MUTE(0x03); - pin_mux |= TWL4030_GPIO6_PWM0_MUTE(0x02); - twl_i2c_write_u8(TWL4030_MODULE_INTBR, pin_mux, - TWL4030_INTBR_PMBR1); - ret = platform_device_add(sdp3430_snd_device); if (ret) goto err1; -- cgit v1.1