From b4a91cf05c33d4ab5b2b3738a257a3fe49b462bd Mon Sep 17 00:00:00 2001 From: Dylan Reid Date: Fri, 15 Jun 2012 19:36:23 -0700 Subject: ALSA: hda - Handle open while transitioning to D3. This addresses an issue encountered when a pcm is opened while transitioning to low power state (codec->power_on == 1 && codec->power_transition == -1). Add snd_pcm_power_up_d3wait to hda_codec. This function is used to power up from azx_open as opposed to snd_hda_power_up used from codec_exec_verb. When powering up from azx_open, wait for pending power downs to complete, avoiding the power up continuing in parallel with the power down on the work queue. The specific issue seen was with the CS4210 codec, it powers off the ADC and DAC nid in its suspend handler. If it is re-opened before the ~100ms power down process completes, the ADC and DAC nid are initialized while powered down and audio is lost until another suspend/resume cycle. Signed-off-by: Dylan Reid Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_intel.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'sound/pci/hda/hda_intel.c') diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 0276382..7757536 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -1766,7 +1766,7 @@ static int azx_pcm_open(struct snd_pcm_substream *substream) buff_step); snd_pcm_hw_constraint_step(runtime, 0, SNDRV_PCM_HW_PARAM_PERIOD_BYTES, buff_step); - snd_hda_power_up(apcm->codec); + snd_hda_power_up_d3wait(apcm->codec); err = hinfo->ops.open(hinfo, apcm->codec, substream); if (err < 0) { azx_release_device(azx_dev); -- cgit v1.1