From 4e420aa94c9e6974533797efd1dd93e779d490c3 Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Thu, 5 Jun 2008 16:52:15 +0200 Subject: kbuild: always unifdef files in headers_install* unifdef utility is fast enough to warrant that we always run the scripts through unifdef. This patch runs all headers listed with header-y and unifdef-y through unifdef. Next step is to drop unifdef-y in all Kbuild files and that can now be done in smaller steps. Signed-off-by: Sam Ravnborg Cc: David Woodhouse Cc: Adrian Bunk --- scripts/Makefile.headersinst | 29 ++++++++++------------------- 1 file changed, 10 insertions(+), 19 deletions(-) (limited to 'scripts') diff --git a/scripts/Makefile.headersinst b/scripts/Makefile.headersinst index 53dae3e..22b17af 100644 --- a/scripts/Makefile.headersinst +++ b/scripts/Makefile.headersinst @@ -50,25 +50,22 @@ ifeq ($(obj)$(ALTARCH),include/asm-$(ARCH)$(BIASMDIR)) _dst := include/asm endif -header-y := $(sort $(header-y)) -unifdef-y := $(sort $(unifdef-y)) +header-y := $(sort $(header-y) $(unifdef-y)) subdir-y := $(patsubst %/,%,$(filter %/, $(header-y))) header-y := $(filter-out %/, $(header-y)) -header-y := $(filter-out $(unifdef-y),$(header-y)) # stamp files for header checks -check-y := $(patsubst %,.check.%,$(header-y) $(unifdef-y) $(objhdr-y)) +check-y := $(patsubst %,.check.%,$(header-y) $(objhdr-y)) # Work out what needs to be removed oldheaders := $(patsubst $(INSTALL_HDR_PATH)/$(_dst)/%,%,$(wildcard $(INSTALL_HDR_PATH)/$(_dst)/*.h)) -unwanted := $(filter-out $(header-y) $(unifdef-y) $(objhdr-y),$(oldheaders)) +unwanted := $(filter-out $(header-y) $(objhdr-y),$(oldheaders)) oldcheckstamps := $(patsubst $(INSTALL_HDR_PATH)/$(_dst)/%,%,$(wildcard $(INSTALL_HDR_PATH)/$(_dst)/.check.*.h)) unwanted += $(filter-out $(check-y),$(oldcheckstamps)) # Prefix them all with full paths to $(INSTALL_HDR_PATH) header-y := $(patsubst %,$(INSTALL_HDR_PATH)/$(_dst)/%,$(header-y)) -unifdef-y := $(patsubst %,$(INSTALL_HDR_PATH)/$(_dst)/%,$(unifdef-y)) objhdr-y := $(patsubst %,$(INSTALL_HDR_PATH)/$(_dst)/%,$(objhdr-y)) check-y := $(patsubst %,$(INSTALL_HDR_PATH)/$(_dst)/%,$(check-y)) @@ -88,10 +85,6 @@ quiet_cmd_o_hdr_install = INSTALL $(patsubst $(INSTALL_HDR_PATH)/%,%,$@) cmd_o_hdr_install = cp $(patsubst $(INSTALL_HDR_PATH)/$(_dst)/%,$(objtree)/$(obj)/%,$@) \ $(INSTALL_HDR_PATH)/$(_dst) -quiet_cmd_headers_install = INSTALL $(patsubst $(INSTALL_HDR_PATH)/%,%,$@) - cmd_headers_install = $(HDRSED) $(patsubst $(INSTALL_HDR_PATH)/$(_dst)/%,$(srctree)/$(obj)/%,$@) \ - > $@ - quiet_cmd_unifdef = UNIFDEF $(patsubst $(INSTALL_HDR_PATH)/%,%,$@) cmd_unifdef = $(UNIFDEF) $(patsubst $(INSTALL_HDR_PATH)/$(_dst)/%,$(srctree)/$(obj)/%,$@) \ | $(HDRSED) > $@ || : @@ -151,10 +144,10 @@ include /dev/null $(wildcard $(check-y)) else # Rules for installing headers -__headersinst: $(subdir-y) $(header-y) $(unifdef-y) $(altarch-y) $(objhdr-y) +__headersinst: $(subdir-y) $(header-y) $(altarch-y) $(objhdr-y) @true -$(objhdr-y) $(subdir-y) $(header-y) $(unifdef-y): | $(INSTALL_HDR_PATH)/$(_dst) $(unwanted) +$(objhdr-y) $(subdir-y) $(header-y): | $(INSTALL_HDR_PATH)/$(_dst) $(unwanted) $(INSTALL_HDR_PATH)/$(_dst): $(call cmd,mkdir) @@ -164,18 +157,16 @@ $(unwanted): $(call cmd,remove) ifdef GENASM -$(objhdr-y) $(header-y) $(unifdef-y): $(KBUILDFILES) +$(objhdr-y) $(header-y): $(KBUILDFILES) $(call cmd,gen) else -$(objhdr-y) : $(INSTALL_HDR_PATH)/$(_dst)/%.h: $(objtree)/$(obj)/%.h $(KBUILDFILES) +$(objhdr-y): $(INSTALL_HDR_PATH)/$(_dst)/%.h: $(objtree)/$(obj)/%.h $(KBUILDFILES) $(call cmd,o_hdr_install) -$(header-y) : $(INSTALL_HDR_PATH)/$(_dst)/%.h: $(srctree)/$(obj)/%.h $(KBUILDFILES) - $(call cmd,headers_install) - -$(unifdef-y) : $(INSTALL_HDR_PATH)/$(_dst)/%.h: $(srctree)/$(obj)/%.h $(KBUILDFILES) +$(header-y): $(INSTALL_HDR_PATH)/$(_dst)/%.h: $(srctree)/$(obj)/%.h $(KBUILDFILES) $(call cmd,unifdef) + endif endif @@ -184,7 +175,7 @@ hdrinst := -rR -f $(srctree)/scripts/Makefile.headersinst obj .PHONY: altarch-dir # All the files in the normal arch dir must be created first, since we test # for their existence. -altarch-dir: $(subdir-y) $(header-y) $(unifdef-y) $(objhdr-y) +altarch-dir: $(subdir-y) $(header-y) $(objhdr-y) $(Q)$(MAKE) $(hdrinst)=include/asm-$(ALTARCH) dst=include/asm-$(ALTARCH) $(Q)$(MAKE) $(hdrinst)=include/asm dst=include/asm$(BIASMDIR) -- cgit v1.1 From 283039fb7ded6b863eacc9cfd67232297622e52d Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Thu, 5 Jun 2008 19:19:47 +0200 Subject: kbuild: drop support of ALTARCH for headers_* ALTARCH is no longer used by any arch(*) so drop support for this from Makefile.headerinst Dropping ALTARCH support simplifies Makefile.headerinst (*) sparc64 uses it but work is ongoing to drop it and no furter usage is planned. Signed-off-by: Sam Ravnborg Cc: David Woodhouse Cc: David Miller --- scripts/Makefile.headersinst | 84 +++++--------------------------------------- 1 file changed, 9 insertions(+), 75 deletions(-) (limited to 'scripts') diff --git a/scripts/Makefile.headersinst b/scripts/Makefile.headersinst index 22b17af..1fb8c00 100644 --- a/scripts/Makefile.headersinst +++ b/scripts/Makefile.headersinst @@ -23,30 +23,17 @@ HDRSED := sed -e "s/ inline / __inline__ /g" \ _dst := $(if $(dst),$(dst),$(obj)) -ifeq (,$(patsubst include/asm/%,,$(obj)/)) -# For producing the generated stuff in include/asm for biarch builds, include -# both sets of Kbuild files; we'll generate anything which is mentioned in -# _either_ arch, and recurse into subdirectories which are mentioned in either -# arch. Since some directories may exist in one but not the other, we must -# use $(wildcard...). -GENASM := 1 -archasm := $(subst include/asm,asm-$(ARCH),$(obj)) -altarchasm := $(subst include/asm,asm-$(ALTARCH),$(obj)) -KBUILDFILES := $(wildcard $(srctree)/include/$(archasm)/Kbuild $(srctree)/include/$(altarchasm)/Kbuild) -else -KBUILDFILES := $(srctree)/$(obj)/Kbuild -endif +kbuild-file := $(srctree)/$(obj)/Kbuild +include $(kbuild-file) -include $(KBUILDFILES) +include scripts/Kbuild.include -include scripts/Kbuild.include - -# If this is include/asm-$(ARCH) and there's no $(ALTARCH), then -# override $(_dst) so that we install to include/asm directly. +# If this is include/asm-$(ARCH) then override $(_dst) so that +# we install to include/asm directly. # Unless $(BIASMDIR) is set, in which case we're probably doing # a 'headers_install_all' build and we should keep the -$(ARCH) # in the directory name. -ifeq ($(obj)$(ALTARCH),include/asm-$(ARCH)$(BIASMDIR)) +ifeq ($(obj),include/asm-$(ARCH)$(BIASMDIR)) _dst := include/asm endif @@ -69,18 +56,6 @@ header-y := $(patsubst %,$(INSTALL_HDR_PATH)/$(_dst)/%,$(header-y)) objhdr-y := $(patsubst %,$(INSTALL_HDR_PATH)/$(_dst)/%,$(objhdr-y)) check-y := $(patsubst %,$(INSTALL_HDR_PATH)/$(_dst)/%,$(check-y)) - -ifdef ALTARCH -ifeq ($(obj),include/asm-$(ARCH)) -altarch-y := altarch-dir -endif -endif - -# Make the definitions visible for recursive make invocations -export ALTARCH -export ARCHDEF -export ALTARCHDEF - quiet_cmd_o_hdr_install = INSTALL $(patsubst $(INSTALL_HDR_PATH)/%,%,$@) cmd_o_hdr_install = cp $(patsubst $(INSTALL_HDR_PATH)/$(_dst)/%,$(objtree)/$(obj)/%,$@) \ $(INSTALL_HDR_PATH)/$(_dst) @@ -99,34 +74,6 @@ quiet_cmd_remove = REMOVE $(_dst)/$@ quiet_cmd_mkdir = MKDIR $(patsubst $(INSTALL_HDR_PATH)/%,%,$@) cmd_mkdir = mkdir -p $@ -quiet_cmd_gen = GEN $(patsubst $(INSTALL_HDR_PATH)/%,%,$@) - cmd_gen = \ -FNAME=$(patsubst $(INSTALL_HDR_PATH)/$(_dst)/%,%,$@); \ -STUBDEF=__ASM_STUB_`echo $$FNAME | tr a-z.- A-Z__`; \ -(echo "/* File autogenerated by 'make headers_install' */" ; \ -echo "\#ifndef $$STUBDEF" ; \ -echo "\#define $$STUBDEF" ; \ -echo "\# if $(ARCHDEF)" ; \ -if [ -r $(subst /$(_dst)/,/include/$(archasm)/,$@) ]; then \ - echo "\# include <$(archasm)/$$FNAME>" ; \ -else \ - echo "\# error $(archasm)/$$FNAME does not exist in" \ - "the $(ARCH) architecture" ; \ -fi ; \ -echo "\# elif $(ALTARCHDEF)" ; \ -if [ -r $(subst /$(_dst)/,/include/$(altarchasm)/,$@) ]; then \ - echo "\# include <$(altarchasm)/$$FNAME>" ; \ -else \ - echo "\# error $(altarchasm)/$$FNAME does not exist in" \ - "the $(ALTARCH) architecture" ; \ -fi ; \ -echo "\# else" ; \ -echo "\# warning This machine appears to be" \ - "neither $(ARCH) nor $(ALTARCH)." ; \ -echo "\# endif" ; \ -echo "\#endif /* $$STUBDEF */" ; \ -) > $@ - .PHONY: __headersinst __headerscheck ifdef HDRCHECK @@ -144,7 +91,7 @@ include /dev/null $(wildcard $(check-y)) else # Rules for installing headers -__headersinst: $(subdir-y) $(header-y) $(altarch-y) $(objhdr-y) +__headersinst: $(subdir-y) $(header-y) $(objhdr-y) @true $(objhdr-y) $(subdir-y) $(header-y): | $(INSTALL_HDR_PATH)/$(_dst) $(unwanted) @@ -156,29 +103,16 @@ $(INSTALL_HDR_PATH)/$(_dst): $(unwanted): $(call cmd,remove) -ifdef GENASM -$(objhdr-y) $(header-y): $(KBUILDFILES) - $(call cmd,gen) - -else -$(objhdr-y): $(INSTALL_HDR_PATH)/$(_dst)/%.h: $(objtree)/$(obj)/%.h $(KBUILDFILES) +$(objhdr-y): $(INSTALL_HDR_PATH)/$(_dst)/%.h: $(objtree)/$(obj)/%.h $(kbuild-file) $(call cmd,o_hdr_install) -$(header-y): $(INSTALL_HDR_PATH)/$(_dst)/%.h: $(srctree)/$(obj)/%.h $(KBUILDFILES) +$(header-y): $(INSTALL_HDR_PATH)/$(_dst)/%.h: $(srctree)/$(obj)/%.h $(kbuild-file) $(call cmd,unifdef) endif -endif hdrinst := -rR -f $(srctree)/scripts/Makefile.headersinst obj -.PHONY: altarch-dir -# All the files in the normal arch dir must be created first, since we test -# for their existence. -altarch-dir: $(subdir-y) $(header-y) $(objhdr-y) - $(Q)$(MAKE) $(hdrinst)=include/asm-$(ALTARCH) dst=include/asm-$(ALTARCH) - $(Q)$(MAKE) $(hdrinst)=include/asm dst=include/asm$(BIASMDIR) - # Recursion .PHONY: $(subdir-y) $(subdir-y): -- cgit v1.1 From 62284a37dcd6725921410fb75446d270cc726b4f Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Sat, 7 Jun 2008 13:18:26 +0200 Subject: kbuild: code refactoring in Makefile.headerinst No functional changes just improved readability Signed-off-by: Sam Ravnborg --- scripts/Makefile.headersinst | 64 ++++++++++++++++++++++++-------------------- 1 file changed, 35 insertions(+), 29 deletions(-) (limited to 'scripts') diff --git a/scripts/Makefile.headersinst b/scripts/Makefile.headersinst index 1fb8c00..599adc6 100644 --- a/scripts/Makefile.headersinst +++ b/scripts/Makefile.headersinst @@ -10,7 +10,7 @@ UNIFDEF := scripts/unifdef -U__KERNEL__ # Eliminate the contents of (and inclusions of) compiler.h -HDRSED := sed -e "s/ inline / __inline__ /g" \ +HDRSED := sed -e "s/ inline / __inline__ /g" \ -e "s/[[:space:]]__user[[:space:]]\{1,\}/ /g" \ -e "s/(__user[[:space:]]\{1,\}/ (/g" \ -e "s/[[:space:]]__force[[:space:]]\{1,\}/ /g" \ @@ -37,6 +37,8 @@ ifeq ($(obj),include/asm-$(ARCH)$(BIASMDIR)) _dst := include/asm endif +install := $(INSTALL_HDR_PATH)/$(_dst) + header-y := $(sort $(header-y) $(unifdef-y)) subdir-y := $(patsubst %/,%,$(filter %/, $(header-y))) header-y := $(filter-out %/, $(header-y)) @@ -45,34 +47,34 @@ header-y := $(filter-out %/, $(header-y)) check-y := $(patsubst %,.check.%,$(header-y) $(objhdr-y)) # Work out what needs to be removed -oldheaders := $(patsubst $(INSTALL_HDR_PATH)/$(_dst)/%,%,$(wildcard $(INSTALL_HDR_PATH)/$(_dst)/*.h)) -unwanted := $(filter-out $(header-y) $(objhdr-y),$(oldheaders)) +oldheaders := $(patsubst $(install)/%,%,$(wildcard $(install)/*.h)) +unwanted := $(filter-out $(header-y) $(objhdr-y),$(oldheaders)) -oldcheckstamps := $(patsubst $(INSTALL_HDR_PATH)/$(_dst)/%,%,$(wildcard $(INSTALL_HDR_PATH)/$(_dst)/.check.*.h)) -unwanted += $(filter-out $(check-y),$(oldcheckstamps)) +oldcheckstamps := $(patsubst $(install)/%,%,$(wildcard $(install)/.check.*.h)) +unwanted += $(filter-out $(check-y),$(oldcheckstamps)) # Prefix them all with full paths to $(INSTALL_HDR_PATH) -header-y := $(patsubst %,$(INSTALL_HDR_PATH)/$(_dst)/%,$(header-y)) -objhdr-y := $(patsubst %,$(INSTALL_HDR_PATH)/$(_dst)/%,$(objhdr-y)) -check-y := $(patsubst %,$(INSTALL_HDR_PATH)/$(_dst)/%,$(check-y)) +header-y := $(patsubst %,$(install)/%,$(header-y)) +objhdr-y := $(patsubst %,$(install)/%,$(objhdr-y)) +check-y := $(patsubst %,$(install)/%,$(check-y)) -quiet_cmd_o_hdr_install = INSTALL $(patsubst $(INSTALL_HDR_PATH)/%,%,$@) - cmd_o_hdr_install = cp $(patsubst $(INSTALL_HDR_PATH)/$(_dst)/%,$(objtree)/$(obj)/%,$@) \ - $(INSTALL_HDR_PATH)/$(_dst) +quiet_cmd_o_hdr_install = INSTALL $(patsubst $(INSTALL_HDR_PATH)/%,%,$@) + cmd_o_hdr_install = cp $(patsubst $(install)/%,$(objtree)/$(obj)/%,$@) \ + $(install) -quiet_cmd_unifdef = UNIFDEF $(patsubst $(INSTALL_HDR_PATH)/%,%,$@) - cmd_unifdef = $(UNIFDEF) $(patsubst $(INSTALL_HDR_PATH)/$(_dst)/%,$(srctree)/$(obj)/%,$@) \ - | $(HDRSED) > $@ || : +quiet_cmd_unifdef = UNIFDEF $(patsubst $(INSTALL_HDR_PATH)/%,%,$@) + cmd_unifdef = $(UNIFDEF) $(patsubst $(install)/%,$(srctree)/$(obj)/%,$@)\ + | $(HDRSED) > $@ || : -quiet_cmd_check = CHECK $(patsubst $(INSTALL_HDR_PATH)/$(_dst)/.check.%,$(_dst)/%,$@) - cmd_check = $(CONFIG_SHELL) $(srctree)/scripts/hdrcheck.sh \ - $(INSTALL_HDR_PATH)/include $(subst /.check.,/,$@) $@ +quiet_cmd_check = CHECK $(patsubst $(install)/.check.%,$(_dst)/%,$@) + cmd_check = $(CONFIG_SHELL) $(srctree)/scripts/hdrcheck.sh \ + $(INSTALL_HDR_PATH)/include $(subst /.check.,/,$@) $@ -quiet_cmd_remove = REMOVE $(_dst)/$@ - cmd_remove = rm -f $(INSTALL_HDR_PATH)/$(_dst)/$@ +quiet_cmd_remove = REMOVE $(_dst)/$@ + cmd_remove = rm -f $(install)/$@ -quiet_cmd_mkdir = MKDIR $(patsubst $(INSTALL_HDR_PATH)/%,%,$@) - cmd_mkdir = mkdir -p $@ +quiet_cmd_mkdir = MKDIR $(patsubst $(INSTALL_HDR_PATH)/%,%,$@) + cmd_mkdir = mkdir -p $@ .PHONY: __headersinst __headerscheck @@ -80,13 +82,14 @@ ifdef HDRCHECK __headerscheck: $(subdir-y) $(check-y) @true -$(check-y) : $(INSTALL_HDR_PATH)/$(_dst)/.check.%.h : $(INSTALL_HDR_PATH)/$(_dst)/%.h +$(check-y) : $(install)/.check.%.h : $(install)/%.h $(call cmd,check) # Other dependencies for $(check-y) include /dev/null $(wildcard $(check-y)) -# ... but leave $(check-y) as .PHONY for now until those deps are actually correct. +# but leave $(check-y) as .PHONY for now until those +# deps are actually correct. .PHONY: $(check-y) else @@ -94,26 +97,29 @@ else __headersinst: $(subdir-y) $(header-y) $(objhdr-y) @true -$(objhdr-y) $(subdir-y) $(header-y): | $(INSTALL_HDR_PATH)/$(_dst) $(unwanted) +$(objhdr-y) $(subdir-y) $(header-y): | $(install) $(unwanted) -$(INSTALL_HDR_PATH)/$(_dst): +$(install): $(call cmd,mkdir) +# Rules for removing unwanted header files .PHONY: $(unwanted) $(unwanted): $(call cmd,remove) -$(objhdr-y): $(INSTALL_HDR_PATH)/$(_dst)/%.h: $(objtree)/$(obj)/%.h $(kbuild-file) +# Install generated files +$(objhdr-y): $(install)/%.h: $(objtree)/$(obj)/%.h $(kbuild-file) $(call cmd,o_hdr_install) -$(header-y): $(INSTALL_HDR_PATH)/$(_dst)/%.h: $(srctree)/$(obj)/%.h $(kbuild-file) +# Unifdef header files and install them +$(header-y): $(install)/%.h: $(srctree)/$(obj)/%.h $(kbuild-file) $(call cmd,unifdef) endif -hdrinst := -rR -f $(srctree)/scripts/Makefile.headersinst obj +hdr-inst := -rR -f $(srctree)/scripts/Makefile.headersinst obj # Recursion .PHONY: $(subdir-y) $(subdir-y): - $(Q)$(MAKE) $(hdrinst)=$(obj)/$@ dst=$(_dst)/$@ rel=../$(rel) + $(Q)$(MAKE) $(hdr-inst)=$(obj)/$@ dst=$(_dst)/$@ -- cgit v1.1 From 88181ec30f58a28cd78b26aaac38bef4062b23dc Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Mon, 9 Jun 2008 21:24:28 +0200 Subject: kbuild: only one call for include/ in make headers_* Move it to the top-level file to decide if we install/check the generic headers or the arch specific headers. This revealed a long standing bug where "make headers_check_all" relied on the files in asm/ for the current architecture. So make headers_check_all is now broken by this commit. In addition: o add a simpler way to detect if an arch support exporting header files. o add 'set -e;' so we error out early if make headers_check_all fails. o add sparc64 and cris to arch we do not process in make headers_*_all because: sparc64 - use sparc to export headers cris - is know seriously broken Includes suggestions from: David Woodhouse . Signed-off-by: Sam Ravnborg Cc: David Woodhouse --- scripts/Makefile.headersinst | 9 --------- 1 file changed, 9 deletions(-) (limited to 'scripts') diff --git a/scripts/Makefile.headersinst b/scripts/Makefile.headersinst index 599adc6..599503f 100644 --- a/scripts/Makefile.headersinst +++ b/scripts/Makefile.headersinst @@ -28,15 +28,6 @@ include $(kbuild-file) include scripts/Kbuild.include -# If this is include/asm-$(ARCH) then override $(_dst) so that -# we install to include/asm directly. -# Unless $(BIASMDIR) is set, in which case we're probably doing -# a 'headers_install_all' build and we should keep the -$(ARCH) -# in the directory name. -ifeq ($(obj),include/asm-$(ARCH)$(BIASMDIR)) - _dst := include/asm -endif - install := $(INSTALL_HDR_PATH)/$(_dst) header-y := $(sort $(header-y) $(unifdef-y)) -- cgit v1.1 From 7712401ae9006fc9d9b9a3e7861dc73781429a89 Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Sun, 15 Jun 2008 21:41:09 +0200 Subject: kbuild: optimize headers_* targets Move the core functionality of headers_install and headers_check to two small perl scripts. The makefile is adapted to use the perl scrip and changed to operate on all files in a directory. So if one file is changed then all files in the directory is processed. perl were chosen for the helper scripts because this is pure text processing which perl is good at and especially the headers_check.pl script are expected to see changes / new checks implmented. The speed is ~300% faster on this box. And the output generated to the screen is now down to two lines per directory (one for install, one for check) so it is easier to scroll back after a kernel build. The perl scripts has been brought to sanity by patient feedback from: Vegard Nossum Signed-off-by: Sam Ravnborg --- scripts/Makefile.headersinst | 145 +++++++++++++++++++------------------------ scripts/hdrcheck.sh | 10 --- scripts/headers_check.pl | 56 +++++++++++++++++ scripts/headers_install.pl | 42 +++++++++++++ 4 files changed, 161 insertions(+), 92 deletions(-) delete mode 100755 scripts/hdrcheck.sh create mode 100644 scripts/headers_check.pl create mode 100644 scripts/headers_install.pl (limited to 'scripts') diff --git a/scripts/Makefile.headersinst b/scripts/Makefile.headersinst index 599503f..be2b70c4 100644 --- a/scripts/Makefile.headersinst +++ b/scripts/Makefile.headersinst @@ -1,26 +1,14 @@ # ========================================================================== # Installing headers # -# header-y files will be installed verbatim -# unifdef-y are the files where unifdef will be run before installing files -# objhdr-y are generated files that will be installed verbatim +# header-y - list files to be installed. They are preprocessed +# to remove __KERNEL__ section of the file +# unifdef-y - Same as header-y. Obsolete +# objhdr-y - Same as header-y but for generated files # # ========================================================================== -UNIFDEF := scripts/unifdef -U__KERNEL__ - -# Eliminate the contents of (and inclusions of) compiler.h -HDRSED := sed -e "s/ inline / __inline__ /g" \ - -e "s/[[:space:]]__user[[:space:]]\{1,\}/ /g" \ - -e "s/(__user[[:space:]]\{1,\}/ (/g" \ - -e "s/[[:space:]]__force[[:space:]]\{1,\}/ /g" \ - -e "s/(__force[[:space:]]\{1,\}/ (/g" \ - -e "s/[[:space:]]__iomem[[:space:]]\{1,\}/ /g" \ - -e "s/(__iomem[[:space:]]\{1,\}/ (/g" \ - -e "s/[[:space:]]__attribute_const__[[:space:]]\{1,\}/\ /g" \ - -e "s/[[:space:]]__attribute_const__$$//" \ - -e "/^\#include /d" - +# called may set destination dir (when installing to asm/) _dst := $(if $(dst),$(dst),$(obj)) kbuild-file := $(srctree)/$(obj)/Kbuild @@ -28,89 +16,82 @@ include $(kbuild-file) include scripts/Kbuild.include -install := $(INSTALL_HDR_PATH)/$(_dst) - -header-y := $(sort $(header-y) $(unifdef-y)) -subdir-y := $(patsubst %/,%,$(filter %/, $(header-y))) -header-y := $(filter-out %/, $(header-y)) +install := $(INSTALL_HDR_PATH)/$(_dst) -# stamp files for header checks -check-y := $(patsubst %,.check.%,$(header-y) $(objhdr-y)) - -# Work out what needs to be removed -oldheaders := $(patsubst $(install)/%,%,$(wildcard $(install)/*.h)) -unwanted := $(filter-out $(header-y) $(objhdr-y),$(oldheaders)) +header-y := $(sort $(header-y) $(unifdef-y)) +subdirs := $(patsubst %/,%,$(filter %/, $(header-y))) +header-y := $(filter-out %/, $(header-y)) -oldcheckstamps := $(patsubst $(install)/%,%,$(wildcard $(install)/.check.*.h)) -unwanted += $(filter-out $(check-y),$(oldcheckstamps)) +# files used to track state of install/check +install-file := $(install)/.install +check-file := $(install)/.check -# Prefix them all with full paths to $(INSTALL_HDR_PATH) -header-y := $(patsubst %,$(install)/%,$(header-y)) -objhdr-y := $(patsubst %,$(install)/%,$(objhdr-y)) -check-y := $(patsubst %,$(install)/%,$(check-y)) +# all headers files for this dir +all-files := $(header-y) $(objhdr-y) +input-files := $(addprefix $(srctree)/$(obj)/,$(header-y)) \ + $(addprefix $(objtree)/$(obj)/,$(objhdr-y)) +output-files := $(addprefix $(install)/, $(all-files)) -quiet_cmd_o_hdr_install = INSTALL $(patsubst $(INSTALL_HDR_PATH)/%,%,$@) - cmd_o_hdr_install = cp $(patsubst $(install)/%,$(objtree)/$(obj)/%,$@) \ - $(install) - -quiet_cmd_unifdef = UNIFDEF $(patsubst $(INSTALL_HDR_PATH)/%,%,$@) - cmd_unifdef = $(UNIFDEF) $(patsubst $(install)/%,$(srctree)/$(obj)/%,$@)\ - | $(HDRSED) > $@ || : +# Work out what needs to be removed +oldheaders := $(patsubst $(install)/%,%,$(wildcard $(install)/*.h)) +unwanted := $(filter-out $(all-files),$(oldheaders)) -quiet_cmd_check = CHECK $(patsubst $(install)/.check.%,$(_dst)/%,$@) - cmd_check = $(CONFIG_SHELL) $(srctree)/scripts/hdrcheck.sh \ - $(INSTALL_HDR_PATH)/include $(subst /.check.,/,$@) $@ +# Prefix unwanted with full paths to $(INSTALL_HDR_PATH) +unwanted-file := $(addprefix $(install)/, $(unwanted)) -quiet_cmd_remove = REMOVE $(_dst)/$@ - cmd_remove = rm -f $(install)/$@ +printdir = $(patsubst $(INSTALL_HDR_PATH)/%/,%,$(dir $@)) -quiet_cmd_mkdir = MKDIR $(patsubst $(INSTALL_HDR_PATH)/%,%,$@) - cmd_mkdir = mkdir -p $@ +quiet_cmd_install = INSTALL $(printdir) ($(words $(all-files))\ + file$(if $(word 2, $(all-files)),s)) + cmd_install = $(PERL) $< $(srctree)/$(obj) $(install) $(header-y); \ + $(PERL) $< $(objtree)/$(obj) $(install) $(objhdr-y); \ + touch $@ -.PHONY: __headersinst __headerscheck +quiet_cmd_remove = REMOVE $(unwanted) + cmd_remove = rm -f $(unwanted-file) -ifdef HDRCHECK -__headerscheck: $(subdir-y) $(check-y) - @true +quiet_cmd_check = CHECK $(printdir) ($(words $(all-files)) files) + cmd_check = $(PERL) $< $(INSTALL_HDR_PATH)/include $(SRCARCH) \ + $(addprefix $(install)/, $(all-files)); \ + touch $@ -$(check-y) : $(install)/.check.%.h : $(install)/%.h - $(call cmd,check) +PHONY += __headersinst __headerscheck -# Other dependencies for $(check-y) -include /dev/null $(wildcard $(check-y)) +ifndef HDRCHECK +# Rules for installing headers +__headersinst: $(subdirs) $(install-file) + @: -# but leave $(check-y) as .PHONY for now until those -# deps are actually correct. -.PHONY: $(check-y) +targets += $(install-file) +$(install-file): scripts/headers_install.pl $(input-files) FORCE + $(if $(unwanted),$(call cmd,remove),) + $(if $(wildcard $(dir $@)),,$(shell mkdir -p $(dir $@))) + $(call if_changed,install) else -# Rules for installing headers -__headersinst: $(subdir-y) $(header-y) $(objhdr-y) - @true +__headerscheck: $(subdirs) $(check-file) + @: -$(objhdr-y) $(subdir-y) $(header-y): | $(install) $(unwanted) +targets += $(check-file) +$(check-file): scripts/headers_check.pl $(output-files) FORCE + $(call if_changed,check) -$(install): - $(call cmd,mkdir) - -# Rules for removing unwanted header files -.PHONY: $(unwanted) -$(unwanted): - $(call cmd,remove) +endif -# Install generated files -$(objhdr-y): $(install)/%.h: $(objtree)/$(obj)/%.h $(kbuild-file) - $(call cmd,o_hdr_install) +# Recursion +hdr-inst := -rR -f $(srctree)/scripts/Makefile.headersinst obj +.PHONY: $(subdirs) +$(subdirs): + $(Q)$(MAKE) $(hdr-inst)=$(obj)/$@ dst=$(_dst)/$@ -# Unifdef header files and install them -$(header-y): $(install)/%.h: $(srctree)/$(obj)/%.h $(kbuild-file) - $(call cmd,unifdef) +targets := $(wildcard $(sort $(targets))) +cmd_files := $(wildcard \ + $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd)) +ifneq ($(cmd_files),) + include $(cmd_files) endif -hdr-inst := -rR -f $(srctree)/scripts/Makefile.headersinst obj - -# Recursion -.PHONY: $(subdir-y) -$(subdir-y): - $(Q)$(MAKE) $(hdr-inst)=$(obj)/$@ dst=$(_dst)/$@ +.PHONY: $(PHONY) +PHONY += FORCE +FORCE: ; diff --git a/scripts/hdrcheck.sh b/scripts/hdrcheck.sh deleted file mode 100755 index 3159858..0000000 --- a/scripts/hdrcheck.sh +++ /dev/null @@ -1,10 +0,0 @@ -#!/bin/sh - -for FILE in `grep '^[ \t]*#[ \t]*include[ \t]*<' $2 | cut -f2 -d\< | cut -f1 -d\> | egrep ^linux\|^asm` ; do - if [ ! -r $1/$FILE ]; then - echo $2 requires $FILE, which does not exist in exported headers - exit 1 - fi -done -# FIXME: List dependencies into $3 -touch $3 diff --git a/scripts/headers_check.pl b/scripts/headers_check.pl new file mode 100644 index 0000000..15d53a6 --- /dev/null +++ b/scripts/headers_check.pl @@ -0,0 +1,56 @@ +#!/usr/bin/perl +# +# headers_check.pl execute a number of trivial consistency checks +# +# Usage: headers_check.pl dir [files...] +# dir: dir to look for included files +# arch: architecture +# files: list of files to check +# +# The script reads the supplied files line by line and: +# +# 1) for each include statement it checks if the +# included file actually exists. +# Only include files located in asm* and linux* are checked. +# The rest are assumed to be system include files. +# +# 2) TODO: check for leaked CONFIG_ symbols + +use strict; +use warnings; + +my ($dir, $arch, @files) = @ARGV; + +my $ret = 0; +my $line; +my $lineno = 0; +my $filename; + +foreach my $file (@files) { + $filename = $file; + open(my $fh, '<', "$filename") or die "$filename: $!\n"; + $lineno = 0; + while ($line = <$fh>) { + $lineno++; + check_include(); + } + close $fh; +} +exit $ret; + +sub check_include +{ + if ($line =~ m/^\s*#\s*include\s+<((asm|linux).*)>/) { + my $inc = $1; + my $found; + $found = stat($dir . "/" . $inc); + if (!$found) { + $inc =~ s#asm/#asm-$arch/#; + $found = stat($dir . "/" . $inc); + } + if (!$found) { + printf STDERR "$filename:$lineno: included file '$inc' is not exported\n"; + $ret = 1; + } + } +} diff --git a/scripts/headers_install.pl b/scripts/headers_install.pl new file mode 100644 index 0000000..f0ff9a3 --- /dev/null +++ b/scripts/headers_install.pl @@ -0,0 +1,42 @@ +#!/usr/bin/perl +# +# headers_install prepare the listed header files for use in +# user space and copy the files to their destination. +# +# Usage: headers_install.pl odir installdir [files...] +# odir: dir to open files +# install: dir to install the files +# files: list of files to check +# +# Step in preparation for users space: +# 1) Drop all use of compiler.h definitions +# 2) Drop include of compiler.h +# 3) Drop all sections defined out by __KERNEL__ (using unifdef) + +use strict; +use warnings; + +my ($readdir, $installdir, @files) = @ARGV; + +my $unifdef = "scripts/unifdef -U__KERNEL__"; + +foreach my $file (@files) { + my $tmpfile = "$installdir/$file.tmp"; + open(my $infile, '<', "$readdir/$file") + or die "$readdir/$file: $!\n"; + open(my $outfile, '>', "$tmpfile") or die "$tmpfile: $!\n"; + while (my $line = <$infile>) { + $line =~ s/([\s(])__user\s/$1/g; + $line =~ s/([\s(])__force\s/$1/g; + $line =~ s/([\s(])__iomem\s/$1/g; + $line =~ s/\s__attribute_const__\s/ /g; + $line =~ s/\s__attribute_const__$//g; + $line =~ s/^#include //; + printf $outfile "%s", $line; + } + close $outfile; + close $infile; + system $unifdef . " $tmpfile > $installdir/$file"; + unlink $tmpfile; +} +exit 0; -- cgit v1.1 From db1bec4f5271d7799d481cd4d95fdc268bdd7614 Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Mon, 16 Jun 2008 21:29:38 +0200 Subject: kbuild: install all headers when arch is changed We see some header files that are selected dependent on the actual architecture so force a reinstallation of all header files when the arch changes. This slows down "make headers_check_all" but then we better reflect reality. Signed-off-by: Sam Ravnborg --- scripts/Makefile.headersinst | 7 ++++--- scripts/headers_install.pl | 13 ++++++++----- 2 files changed, 12 insertions(+), 8 deletions(-) (limited to 'scripts') diff --git a/scripts/Makefile.headersinst b/scripts/Makefile.headersinst index be2b70c4..612dc13 100644 --- a/scripts/Makefile.headersinst +++ b/scripts/Makefile.headersinst @@ -43,9 +43,10 @@ printdir = $(patsubst $(INSTALL_HDR_PATH)/%/,%,$(dir $@)) quiet_cmd_install = INSTALL $(printdir) ($(words $(all-files))\ file$(if $(word 2, $(all-files)),s)) - cmd_install = $(PERL) $< $(srctree)/$(obj) $(install) $(header-y); \ - $(PERL) $< $(objtree)/$(obj) $(install) $(objhdr-y); \ - touch $@ + cmd_install = \ + $(PERL) $< $(srctree)/$(obj) $(install) $(SRCARCH) $(header-y); \ + $(PERL) $< $(objtree)/$(obj) $(install) $(SRCARCH) $(objhdr-y); \ + touch $@ quiet_cmd_remove = REMOVE $(unwanted) cmd_remove = rm -f $(unwanted-file) diff --git a/scripts/headers_install.pl b/scripts/headers_install.pl index f0ff9a3..68591cd 100644 --- a/scripts/headers_install.pl +++ b/scripts/headers_install.pl @@ -3,10 +3,13 @@ # headers_install prepare the listed header files for use in # user space and copy the files to their destination. # -# Usage: headers_install.pl odir installdir [files...] -# odir: dir to open files -# install: dir to install the files -# files: list of files to check +# Usage: headers_install.pl readdir installdir arch [files...] +# readdir: dir to open files +# installdir: dir to install the files +# arch: current architecture +# arch is used to force a reinstallation when the arch +# changes because kbuild then detect a command line change. +# files: list of files to check # # Step in preparation for users space: # 1) Drop all use of compiler.h definitions @@ -16,7 +19,7 @@ use strict; use warnings; -my ($readdir, $installdir, @files) = @ARGV; +my ($readdir, $installdir, $arch, @files) = @ARGV; my $unifdef = "scripts/unifdef -U__KERNEL__"; -- cgit v1.1 From 2fb9b1bd9dd7f4455407dc1bec74fb8ae0d3138e Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Sat, 21 Jun 2008 00:24:17 +0200 Subject: kbuild: prepare headers_* for arch/$ARCH/include Factor out the headers_*_all support to a seperate shell script and add support for arch specific header files can be located in either arch/$ARCH/include/asm or include/asm-$ARCH/ In "make help" always display the headers_* targets. Signed-off-by: Sam Ravnborg --- scripts/headers.sh | 41 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 41 insertions(+) create mode 100755 scripts/headers.sh (limited to 'scripts') diff --git a/scripts/headers.sh b/scripts/headers.sh new file mode 100755 index 0000000..d33426f --- /dev/null +++ b/scripts/headers.sh @@ -0,0 +1,41 @@ +#!/bin/sh +# Run headers_$1 command for all suitable architectures + +# Stop on error +set -e + +do_command() +{ + if [ -f ${srctree}/arch/$2/include/asm/Kbuild ]; then + make ARCH=$2 KBUILD_HEADERS=$1 headers_$1 + elif [ -f ${srctree}/include/asm-$2/Kbuild ]; then + make ARCH=$2 KBUILD_HEADERS=$1 headers_$1 + else + printf "Ignoring arch: %s\n" ${arch} + fi +} + +# Do not try this architecture +drop="generic um ppc sparc64 cris" + +archs=$(ls ${srctree}/arch) + +for arch in ${archs}; do + case ${arch} in + um) # no userspace export + ;; + ppc) # headers exported by powerpc + ;; + sparc64) # headers exported by sparc + ;; + cris) # headers export are known broken + ;; + *) + if [ -d ${srctree}/arch/${arch} ]; then + do_command $1 ${arch} + fi + ;; + esac +done + + -- cgit v1.1 From 74fc5c653c5d0f9d4d70499709a68e61c4acf991 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 19 Jun 2008 16:03:29 -0700 Subject: kernel-doc: handle/strip __init Handle __init in functions with kernel-doc notation by stripping the __init away from the output doc. This is already being done for "__devinit". This patch fixes these kernel-doc error/aborts: Error(linux-next-20080619//drivers/usb/gadget/config.c:132): cannot understand prototype: 'struct usb_descriptor_header **__init usb_copy_descriptors(struct usb_descriptor_header **src) ' Error(linux-next-20080619//drivers/usb/gadget/config.c:182): cannot understand prototype: 'struct usb_endpoint_descriptor *__init usb_find_endpoint( struct usb_descriptor_header **src, struct usb_descriptor_header **copy, struct usb_endpoint_descriptor *match ) ' Signed-off-by: Randy Dunlap Cc: David Brownell Signed-off-by: Sam Ravnborg --- scripts/kernel-doc | 1 + 1 file changed, 1 insertion(+) (limited to 'scripts') diff --git a/scripts/kernel-doc b/scripts/kernel-doc index 88e3934..d8f77e2 100755 --- a/scripts/kernel-doc +++ b/scripts/kernel-doc @@ -1643,6 +1643,7 @@ sub dump_function($$) { $prototype =~ s/^__always_inline +//; $prototype =~ s/^noinline +//; $prototype =~ s/__devinit +//; + $prototype =~ s/__init +//; $prototype =~ s/^#define\s+//; #ak added $prototype =~ s/__attribute__\s*\(\([a-z,]*\)\)//; -- cgit v1.1 From a717417e7f96ad2c6c3d80cdd0836e49597399a3 Mon Sep 17 00:00:00 2001 From: Tim Bird Date: Tue, 24 Jun 2008 10:56:06 -0700 Subject: kconfig: add diffconfig utility Diffconfig is a simple utility for comparing two kernel configuration files. See usage in the script for more info. Signed-off-by: Tim Bird Signed-off-by: Sam Ravnborg --- scripts/diffconfig | 129 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 129 insertions(+) create mode 100755 scripts/diffconfig (limited to 'scripts') diff --git a/scripts/diffconfig b/scripts/diffconfig new file mode 100755 index 0000000..b91f3e3 --- /dev/null +++ b/scripts/diffconfig @@ -0,0 +1,129 @@ +#!/usr/bin/python +# +# diffconfig - a tool to compare .config files. +# +# originally written in 2006 by Matt Mackall +# (at least, this was in his bloatwatch source code) +# last worked on 2008 by Tim Bird +# + +import sys, os + +def usage(): + print """Usage: diffconfig [-h] [-m] [ ] + +Diffconfig is a simple utility for comparing two .config files. +Using standard diff to compare .config files often includes extraneous and +distracting information. This utility produces sorted output with only the +changes in configuration values between the two files. + +Added and removed items are shown with a leading plus or minus, respectively. +Changed items show the old and new values on a single line. + +If -m is specified, then output will be in "merge" style, which has the +changed and new values in kernel config option format. + +If no config files are specified, .config and .config.old are used. + +Example usage: + $ diffconfig .config config-with-some-changes +-EXT2_FS_XATTR n +-EXT2_FS_XIP n + CRAMFS n -> y + EXT2_FS y -> n + LOG_BUF_SHIFT 14 -> 16 + PRINTK_TIME n -> y +""" + sys.exit(0) + +# returns a dictionary of name/value pairs for config items in the file +def readconfig(config_file): + d = {} + for line in config_file: + line = line[:-1] + if line[:7] == "CONFIG_": + name, val = line[7:].split("=", 1) + d[name] = val + if line[-11:] == " is not set": + d[line[9:-11]] = "n" + return d + +def print_config(op, config, value, new_value): + global merge_style + + if merge_style: + if new_value: + if new_value=="n": + print "# CONFIG_%s is not set" % config + else: + print "CONFIG_%s=%s" % (config, new_value) + else: + if op=="-": + print "-%s %s" % (config, value) + elif op=="+": + print "+%s %s" % (config, new_value) + else: + print " %s %s -> %s" % (config, value, new_value) + +def main(): + global merge_style + + # parse command line args + if ("-h" in sys.argv or "--help" in sys.argv): + usage() + + merge_style = 0 + if "-m" in sys.argv: + merge_style = 1 + sys.argv.remove("-m") + + argc = len(sys.argv) + if not (argc==1 or argc == 3): + print "Error: incorrect number of arguments or unrecognized option" + usage() + + if argc == 1: + # if no filenames given, assume .config and .config.old + build_dir="" + if os.environ.has_key("KBUILD_OUTPUT"): + build_dir = os.environ["KBUILD_OUTPUT"]+"/" + + configa_filename = build_dir + ".config.old" + configb_filename = build_dir + ".config" + else: + configa_filename = sys.argv[1] + configb_filename = sys.argv[2] + + a = readconfig(file(configa_filename)) + b = readconfig(file(configb_filename)) + + # print items in a but not b (accumulate, sort and print) + old = [] + for config in a: + if config not in b: + old.append(config) + old.sort() + for config in old: + print_config("-", config, a[config], None) + del a[config] + + # print items that changed (accumulate, sort, and print) + changed = [] + for config in a: + if a[config] != b[config]: + changed.append(config) + else: + del b[config] + changed.sort() + for config in changed: + print_config("->", config, a[config], b[config]) + del b[config] + + # now print items in b but not in a + # (items from b that were in a were removed above) + new = b.keys() + new.sort() + for config in new: + print_config("+", config, None, b[config]) + +main() -- cgit v1.1 From dc7862e5a65b9b9e0aad448398b4f652c49c9350 Mon Sep 17 00:00:00 2001 From: Roman Zippel Date: Tue, 6 May 2008 04:55:55 +0200 Subject: kconfig: set all new symbols automatically Add conf_set_all_new_symbols() which set all symbols (which don't have a value yet) to a specifed value. Signed-off-by: Roman Zippel Signed-off-by: Sam Ravnborg --- scripts/kconfig/confdata.c | 70 ++++++++++++++++++++++++++++++++++++++++++++++ scripts/kconfig/lkc.h | 9 ++++++ 2 files changed, 79 insertions(+) (limited to 'scripts') diff --git a/scripts/kconfig/confdata.c b/scripts/kconfig/confdata.c index ee5fe94..0759761 100644 --- a/scripts/kconfig/confdata.c +++ b/scripts/kconfig/confdata.c @@ -812,3 +812,73 @@ void conf_set_changed_callback(void (*fn)(void)) { conf_changed_callback = fn; } + + +void conf_set_all_new_symbols(enum conf_def_mode mode) +{ + struct symbol *sym, *csym; + struct property *prop; + struct expr *e; + int i, cnt, def; + + for_all_symbols(i, sym) { + if (sym_has_value(sym)) + continue; + switch (sym_get_type(sym)) { + case S_BOOLEAN: + case S_TRISTATE: + switch (mode) { + case def_yes: + sym->def[S_DEF_USER].tri = yes; + break; + case def_mod: + sym->def[S_DEF_USER].tri = mod; + break; + case def_no: + sym->def[S_DEF_USER].tri = no; + break; + case def_random: + sym->def[S_DEF_USER].tri = (tristate)(rand() % 3); + break; + default: + continue; + } + if (!sym_is_choice(sym) || mode != def_random) + sym->flags |= SYMBOL_DEF_USER; + break; + default: + break; + } + + } + + if (modules_sym) + sym_calc_value(modules_sym); + + if (mode != def_random) + return; + + for_all_symbols(i, csym) { + if (sym_has_value(csym) || !sym_is_choice(csym)) + continue; + + sym_calc_value(csym); + prop = sym_get_choice_prop(csym); + def = -1; + while (1) { + cnt = 0; + expr_list_for_each_sym(prop->expr, e, sym) { + if (sym->visible == no) + continue; + if (def == cnt++) { + csym->def[S_DEF_USER].val = sym; + break; + } + } + if (def >= 0 || cnt < 2) + break; + def = (rand() % cnt) + 1; + } + csym->flags |= SYMBOL_DEF_USER; + } +} diff --git a/scripts/kconfig/lkc.h b/scripts/kconfig/lkc.h index 96521cb..4a9af6f 100644 --- a/scripts/kconfig/lkc.h +++ b/scripts/kconfig/lkc.h @@ -42,6 +42,14 @@ extern "C" { #define TF_PARAM 0x0002 #define TF_OPTION 0x0004 +enum conf_def_mode { + def_default, + def_yes, + def_mod, + def_no, + def_random +}; + #define T_OPT_MODULES 1 #define T_OPT_DEFCONFIG_LIST 2 #define T_OPT_ENV 3 @@ -69,6 +77,7 @@ const char *conf_get_configname(void); char *conf_get_default_confname(void); void sym_set_change_count(int count); void sym_add_change_count(int count); +void conf_set_all_new_symbols(enum conf_def_mode mode); /* kconfig_load.c */ void kconfig_load(void); -- cgit v1.1 From f443d2eccf077afd8a839cc7ed66cc4d520c5f05 Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Mon, 30 Jun 2008 22:45:38 +0200 Subject: kconfig: speed up all*config + randconfig Drop the chatty mode when we generate the all*config, randconfig configurations. Ths speeds up the process considerably and noone looked at the output anyway. This patch uses the conf_set_all_new_symbols() function just added to kconfig. Signed-off-by: Sam Ravnborg Cc: Roman Zippel --- scripts/kconfig/conf.c | 154 ++++++++++++++++++++++--------------------------- 1 file changed, 68 insertions(+), 86 deletions(-) (limited to 'scripts') diff --git a/scripts/kconfig/conf.c b/scripts/kconfig/conf.c index fda6313..bd2a27e 100644 --- a/scripts/kconfig/conf.c +++ b/scripts/kconfig/conf.c @@ -76,7 +76,6 @@ static void check_stdin(void) static int conf_askvalue(struct symbol *sym, const char *def) { enum symbol_type type = sym_get_type(sym); - tristate val; if (!sym_has_value(sym)) printf(_("(NEW) ")); @@ -92,15 +91,6 @@ static int conf_askvalue(struct symbol *sym, const char *def) } switch (input_mode) { - case set_no: - case set_mod: - case set_yes: - case set_random: - if (sym_has_value(sym)) { - printf("%s\n", def); - return 0; - } - break; case ask_new: case ask_silent: if (sym_has_value(sym)) { @@ -128,52 +118,6 @@ static int conf_askvalue(struct symbol *sym, const char *def) default: ; } - switch (input_mode) { - case set_yes: - if (sym_tristate_within_range(sym, yes)) { - line[0] = 'y'; - line[1] = '\n'; - line[2] = 0; - break; - } - case set_mod: - if (type == S_TRISTATE) { - if (sym_tristate_within_range(sym, mod)) { - line[0] = 'm'; - line[1] = '\n'; - line[2] = 0; - break; - } - } else { - if (sym_tristate_within_range(sym, yes)) { - line[0] = 'y'; - line[1] = '\n'; - line[2] = 0; - break; - } - } - case set_no: - if (sym_tristate_within_range(sym, no)) { - line[0] = 'n'; - line[1] = '\n'; - line[2] = 0; - break; - } - case set_random: - do { - val = (tristate)(rand() % 3); - } while (!sym_tristate_within_range(sym, val)); - switch (val) { - case no: line[0] = 'n'; break; - case mod: line[0] = 'm'; break; - case yes: line[0] = 'y'; break; - } - line[1] = '\n'; - line[2] = 0; - break; - default: - break; - } printf("%s", line); return 1; } @@ -374,16 +318,12 @@ static int conf_choice(struct menu *menu) else continue; break; - case set_random: - if (is_new) - def = (rand() % cnt) + 1; case set_default: - case set_yes: - case set_mod: - case set_no: cnt = def; printf("%d\n", cnt); break; + default: + break; } conf_childs: @@ -494,6 +434,43 @@ static void check_conf(struct menu *menu) check_conf(child); } +static void conf_do_update(void) +{ + /* Update until a loop caused no more changes */ + do { + conf_cnt = 0; + check_conf(&rootmenu); + } while (conf_cnt); +} + +static int conf_silent_update(void) +{ + const char *name; + + if (conf_get_changed()) { + name = getenv("KCONFIG_NOSILENTUPDATE"); + if (name && *name) { + fprintf(stderr, + _("\n*** Kernel configuration requires explicit update.\n\n")); + return 1; + } + conf_do_update(); + } + return 0; +} + +static int conf_update(void) +{ + rootEntry = &rootmenu; + conf(&rootmenu); + if (input_mode == ask_all) { + input_mode = ask_silent; + valid_stdin = 1; + } + conf_do_update(); + return 0; +} + int main(int ac, char **av) { int opt; @@ -599,36 +576,41 @@ int main(int ac, char **av) default: break; } + switch (input_mode) { + case set_no: + conf_set_all_new_symbols(def_no); + break; + case set_yes: + conf_set_all_new_symbols(def_yes); + break; + case set_mod: + conf_set_all_new_symbols(def_mod); + break; + case set_random: + conf_set_all_new_symbols(def_random); + break; + case ask_silent: + if (conf_silent_update()) + exit(1); + break; + case ask_new: + case ask_all: + case set_default: + if (conf_update()) + exit(1); + break; + } - if (input_mode != ask_silent) { - rootEntry = &rootmenu; - conf(&rootmenu); - if (input_mode == ask_all) { - input_mode = ask_silent; - valid_stdin = 1; - } - } else if (conf_get_changed()) { - name = getenv("KCONFIG_NOSILENTUPDATE"); - if (name && *name) { - fprintf(stderr, _("\n*** Kernel configuration requires explicit update.\n\n")); - return 1; - } - } else - goto skip_check; - - do { - conf_cnt = 0; - check_conf(&rootmenu); - } while (conf_cnt); - if (conf_write(NULL)) { + if (conf_get_changed() && conf_write(NULL)) { fprintf(stderr, _("\n*** Error during writing of the kernel configuration.\n\n")); - return 1; + exit(1); } -skip_check: + /* ask_silent is used during the build so we shall update autoconf. + * All other commands are only used to generate a config. + */ if (input_mode == ask_silent && conf_write_autoconf()) { fprintf(stderr, _("\n*** Error during writing of the kernel configuration.\n\n")); return 1; } - return 0; } -- cgit v1.1 From cd9140e1e73a31fd45f1fd4585260643a2f9ab1d Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Mon, 30 Jun 2008 22:53:04 +0200 Subject: kconfig: make oldconfig is now less chatty Previously when running "make oldconfig" we saw all the propmt lines from kconfig and noone actully read this. With this patch the user will only see output if there is new symbols. This will be seen as "make oldconfig" runs which does not generate any output. A typical run now looks like this: $ make oldconfig scripts/kconfig/conf -o arch/x86/Kconfig $ If a new symbol is found then we restart the config process like this: $ make oldconfig scripts/kconfig/conf -o arch/x86/Kconfig * * Restart config... * * * General setup * Prompt for development and/or incomplete code/drivers (EXPERIMENTAL) [Y/n/?] y Local version - append to kernel release (LOCALVERSION) [] ... The bahaviour is similar to what we know when running the implicit oldconfig target "make silentoldconfig". "make silentoldconfig" are run as part of the kernel build process if the configuration has changed. Signed-off-by: Sam Ravnborg Cc: Roman Zippel --- scripts/kconfig/conf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'scripts') diff --git a/scripts/kconfig/conf.c b/scripts/kconfig/conf.c index bd2a27e..6cdaa0c 100644 --- a/scripts/kconfig/conf.c +++ b/scripts/kconfig/conf.c @@ -590,10 +590,10 @@ int main(int ac, char **av) conf_set_all_new_symbols(def_random); break; case ask_silent: + case ask_new: if (conf_silent_update()) exit(1); break; - case ask_new: case ask_all: case set_default: if (conf_update()) -- cgit v1.1 From 09748e178b6cb8d3b8a748d0159aa7ad8eadcbe1 Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Mon, 30 Jun 2008 23:02:59 +0200 Subject: kconfig: make defconfig is no longer chatty make defconfig generated a lot of output then noone actually read. Use conf_set_all_new_symbols() to generate the default configuration and avoid the chatty output. A typical run now looks like this: $ make defconfig *** Default configuration is based on 'i386_defconfig' arch/x86/configs/i386_defconfig:13:warning: trying to assign nonexistent symbol SEMAPHORE_SLEEPERS arch/x86/configs/i386_defconfig:176:warning: trying to assign nonexistent symbol PREEMPT_BKL ... arch/x86/configs/i386_defconfig:1386:warning: trying to assign nonexistent symbol INSTRUMENTATION $ As an added benefit we now clearly see the warnings generated in the start of the process. Signed-off-by: Sam Ravnborg Cc: Roman Zippel --- scripts/kconfig/conf.c | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-) (limited to 'scripts') diff --git a/scripts/kconfig/conf.c b/scripts/kconfig/conf.c index 6cdaa0c..9fba838 100644 --- a/scripts/kconfig/conf.c +++ b/scripts/kconfig/conf.c @@ -102,9 +102,6 @@ static int conf_askvalue(struct symbol *sym, const char *def) fflush(stdout); fgets(line, 128, stdin); return 1; - case set_default: - printf("%s\n", def); - return 1; default: break; } @@ -318,10 +315,6 @@ static int conf_choice(struct menu *menu) else continue; break; - case set_default: - cnt = def; - printf("%d\n", cnt); - break; default: break; } @@ -589,13 +582,15 @@ int main(int ac, char **av) case set_random: conf_set_all_new_symbols(def_random); break; + case set_default: + conf_set_all_new_symbols(def_default); + break; case ask_silent: case ask_new: if (conf_silent_update()) exit(1); break; case ask_all: - case set_default: if (conf_update()) exit(1); break; -- cgit v1.1 From 56b2f0706d82535fd8d85503f2dcc0be40c8e55d Mon Sep 17 00:00:00 2001 From: Sebastian Siewior Date: Wed, 2 Jul 2008 00:18:08 +0200 Subject: setlocalversion: do not describe if there is nothing to describe Jan Engelhardt wrote: > Just a note that when you run git-describe, you should probably quiten it. > > fatal: cannot describe 'bd7364a0fd5a4a2878fe4a224be1b142a4e6698e' > > This happens when tags are not present, which can happen if Linus's tree > is sent upwards again, IOW: > > machine1$ git-clone torvalds/linux-2.6.git > machine1$ git push elsewhere master > > machine2$ git-clone elsewhere:/linux > machine2$ git-describe HEAD > fatal: cannot describe that Signed-off-by: Sebastian Siewior Acked-by: Jan Engelhardt Signed-off-by: Sam Ravnborg --- scripts/setlocalversion | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'scripts') diff --git a/scripts/setlocalversion b/scripts/setlocalversion index 1c1bdaf..83b7512 100755 --- a/scripts/setlocalversion +++ b/scripts/setlocalversion @@ -12,7 +12,9 @@ cd "${1:-.}" || usage if head=`git rev-parse --verify HEAD 2>/dev/null`; then # Do we have an untagged version? if git name-rev --tags HEAD | grep -E '^HEAD[[:space:]]+(.*~[0-9]*|undefined)$' > /dev/null; then - git describe | awk -F- '{printf("-%05d-%s", $(NF-1),$(NF))}' + if tag=`git describe 2>/dev/null`; then + echo $tag | awk -F- '{printf("-%05d-%s", $(NF-1),$(NF))}' + fi fi # Are there uncommitted changes? -- cgit v1.1