From d24deb2580823ab0b8425790c6f5d18e2ff749d8 Mon Sep 17 00:00:00 2001 From: Gertjan van Wingerde Date: Fri, 4 Dec 2009 23:46:54 +0100 Subject: mac80211: Add define for TX headroom reserved by mac80211 itself. Add a definition of the amount of TX headroom reserved by mac80211 itself for its own purposes. Also add BUILD_BUG_ON to validate the value. This define can then be used by drivers to request additional TX headroom in the most efficient manner. Signed-off-by: Gertjan van Wingerde Acked-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/main.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'net') diff --git a/net/mac80211/main.c b/net/mac80211/main.c index 8116d1a..0d2d948 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -515,6 +515,8 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) * and we need some headroom for passing the frame to monitor * interfaces, but never both at the same time. */ + BUILD_BUG_ON(IEEE80211_TX_STATUS_HEADROOM != + sizeof(struct ieee80211_tx_status_rtap_hdr)); local->tx_headroom = max_t(unsigned int , local->hw.extra_tx_headroom, sizeof(struct ieee80211_tx_status_rtap_hdr)); -- cgit v1.1 From 9a418af5df03ad133cd8c8f6742b75e542db6392 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 17 Dec 2009 13:55:48 +0100 Subject: mac80211: fix peer HT capabilities I noticed yesterday, because Jeff had noticed a speed regression, cf. bug http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2138 that the SM PS settings for peers were wrong. Instead of overwriting the SM PS settings with the local bits, we need to keep the remote bits. The bug was part of the original HT code from over two years ago, but unfortunately nobody noticed that it makes no sense -- we shouldn't be overwriting the peer's setting with our own but rather keep it intact when masking the peer capabilities with our own. While fixing that, I noticed that the masking of capabilities is completely useless for most of the bits, so also fix those other bits. Finally, I also noticed that PSMP_SUPPORT no longer exists in the final 802.11n version, so also remove that. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/ht.c | 25 ++++++++++++++++++++++--- 1 file changed, 22 insertions(+), 3 deletions(-) (limited to 'net') diff --git a/net/mac80211/ht.c b/net/mac80211/ht.c index 3787455..d7dcee6 100644 --- a/net/mac80211/ht.c +++ b/net/mac80211/ht.c @@ -34,9 +34,28 @@ void ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_supported_band *sband, ht_cap->ht_supported = true; - ht_cap->cap = le16_to_cpu(ht_cap_ie->cap_info) & sband->ht_cap.cap; - ht_cap->cap &= ~IEEE80211_HT_CAP_SM_PS; - ht_cap->cap |= sband->ht_cap.cap & IEEE80211_HT_CAP_SM_PS; + /* + * The bits listed in this expression should be + * the same for the peer and us, if the station + * advertises more then we can't use those thus + * we mask them out. + */ + ht_cap->cap = le16_to_cpu(ht_cap_ie->cap_info) & + (sband->ht_cap.cap | + ~(IEEE80211_HT_CAP_LDPC_CODING | + IEEE80211_HT_CAP_SUP_WIDTH_20_40 | + IEEE80211_HT_CAP_GRN_FLD | + IEEE80211_HT_CAP_SGI_20 | + IEEE80211_HT_CAP_SGI_40 | + IEEE80211_HT_CAP_DSSSCCK40)); + /* + * The STBC bits are asymmetric -- if we don't have + * TX then mask out the peer's RX and vice versa. + */ + if (!(sband->ht_cap.cap & IEEE80211_HT_CAP_TX_STBC)) + ht_cap->cap &= ~IEEE80211_HT_CAP_RX_STBC; + if (!(sband->ht_cap.cap & IEEE80211_HT_CAP_RX_STBC)) + ht_cap->cap &= ~IEEE80211_HT_CAP_TX_STBC; ampdu_info = ht_cap_ie->ampdu_params_info; ht_cap->ampdu_factor = -- cgit v1.1 From 0183826b58a2712ffe608bc3302447be3e6a3ab8 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 17 Dec 2009 16:16:53 +0100 Subject: mac80211: fix WMM AP settings application My commit 77fdaa12cea26c204cc12c312fe40bc0f3dcdfd8 Author: Johannes Berg Date: Tue Jul 7 03:45:17 2009 +0200 mac80211: rework MLME for multiple authentications inadvertedly broke WMM because it removed, along with a bunch of other now useless initialisations, the line initialising sdata->u.mgd.wmm_last_param_set to -1 which would make it adopt any WMM parameter set. If, as is usually the case, the AP uses WMM parameter set sequence number zero, we'd never update it until the AP changes the sequence number. Add the missing initialisation back to get the WMM settings from the AP applied locally. Signed-off-by: Johannes Berg Cc: stable@kernel.org [2.6.31+] Signed-off-by: John W. Linville --- net/mac80211/mlme.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'net') diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index d8d50fb..c79e59f 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -915,6 +915,14 @@ static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata, sdata->u.mgd.flags &= ~(IEEE80211_STA_CONNECTION_POLL | IEEE80211_STA_BEACON_POLL); + /* + * Always handle WMM once after association regardless + * of the first value the AP uses. Setting -1 here has + * that effect because the AP values is an unsigned + * 4-bit value. + */ + sdata->u.mgd.wmm_last_param_set = -1; + ieee80211_led_assoc(local, 1); sdata->vif.bss_conf.assoc = 1; -- cgit v1.1 From f466dba1832f05006cf6caa9be41fb98d11cb848 Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Wed, 23 Dec 2009 22:02:57 -0800 Subject: pktgen: ndo_start_xmit can return NET_XMIT_xxx values This updates pktgen so that it does not decrement skb->users when it receives valid NET_XMIT_xxx values. These are now valid return values from ndo_start_xmit in net-next-2.6. They also indicate the skb has been consumed. This fixes pktgen to work correctly with vlan devices. Signed-off-by: John Fastabend Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- net/core/pktgen.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'net') diff --git a/net/core/pktgen.c b/net/core/pktgen.c index a23b45f..de0c2c7 100644 --- a/net/core/pktgen.c +++ b/net/core/pktgen.c @@ -250,8 +250,7 @@ struct pktgen_dev { __u64 count; /* Default No packets to send */ __u64 sofar; /* How many pkts we've sent so far */ __u64 tx_bytes; /* How many bytes we've transmitted */ - __u64 errors; /* Errors when trying to transmit, - pkts will be re-sent */ + __u64 errors; /* Errors when trying to transmit, */ /* runtime counters relating to clone_skb */ @@ -3465,6 +3464,12 @@ static void pktgen_xmit(struct pktgen_dev *pkt_dev) pkt_dev->seq_num++; pkt_dev->tx_bytes += pkt_dev->last_pkt_size; break; + case NET_XMIT_DROP: + case NET_XMIT_CN: + case NET_XMIT_POLICED: + /* skb has been consumed */ + pkt_dev->errors++; + break; default: /* Drivers are not supposed to return other values! */ if (net_ratelimit()) pr_info("pktgen: %s xmit error: %d\n", -- cgit v1.1 From 28f6aeea3f12d37bd258b2c0d5ba891bff4ec479 Mon Sep 17 00:00:00 2001 From: Jamal Hadi Salim Date: Fri, 25 Dec 2009 17:30:22 -0800 Subject: net: restore ip source validation when using policy routing and the skb mark: there are cases where a back path validation requires us to use a different routing table for src ip validation than the one used for mapping ingress dst ip. One such a case is transparent proxying where we pretend to be the destination system and therefore the local table is used for incoming packets but possibly a main table would be used on outbound. Make the default behavior to allow the above and if users need to turn on the symmetry via sysctl src_valid_mark Signed-off-by: Jamal Hadi Salim Signed-off-by: David S. Miller --- net/ipv4/devinet.c | 1 + net/ipv4/fib_frontend.c | 2 ++ 2 files changed, 3 insertions(+) (limited to 'net') diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c index 5cdbc10..040c4f0 100644 --- a/net/ipv4/devinet.c +++ b/net/ipv4/devinet.c @@ -1397,6 +1397,7 @@ static struct devinet_sysctl_table { DEVINET_SYSCTL_RW_ENTRY(ACCEPT_SOURCE_ROUTE, "accept_source_route"), DEVINET_SYSCTL_RW_ENTRY(ACCEPT_LOCAL, "accept_local"), + DEVINET_SYSCTL_RW_ENTRY(SRC_VMARK, "src_valid_mark"), DEVINET_SYSCTL_RW_ENTRY(PROXY_ARP, "proxy_arp"), DEVINET_SYSCTL_RW_ENTRY(MEDIUM_ID, "medium_id"), DEVINET_SYSCTL_RW_ENTRY(BOOTP_RELAY, "bootp_relay"), diff --git a/net/ipv4/fib_frontend.c b/net/ipv4/fib_frontend.c index 3323168..82dbf71 100644 --- a/net/ipv4/fib_frontend.c +++ b/net/ipv4/fib_frontend.c @@ -252,6 +252,8 @@ int fib_validate_source(__be32 src, __be32 dst, u8 tos, int oif, no_addr = in_dev->ifa_list == NULL; rpf = IN_DEV_RPFILTER(in_dev); accept_local = IN_DEV_ACCEPT_LOCAL(in_dev); + if (mark && !IN_DEV_SRC_VMARK(in_dev)) + fl.mark = 0; } rcu_read_unlock(); -- cgit v1.1 From 96c5340147584481ef0c0afbb5423f7563c1d24a Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Fri, 25 Dec 2009 23:30:02 +0000 Subject: NET: XFRM: Fix spelling of neighbour. Signed-off-by: Ralf Baechle net/xfrm/xfrm_policy.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) Signed-off-by: David S. Miller --- net/xfrm/xfrm_policy.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'net') diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c index cb81ca3..4725a54 100644 --- a/net/xfrm/xfrm_policy.c +++ b/net/xfrm/xfrm_policy.c @@ -1445,7 +1445,7 @@ static struct dst_entry *xfrm_bundle_create(struct xfrm_policy *policy, if (!dev) goto free_dst; - /* Copy neighbout for reachability confirmation */ + /* Copy neighbour for reachability confirmation */ dst0->neighbour = neigh_clone(dst->neighbour); xfrm_init_path((struct xfrm_dst *)dst0, dst, nfheader_len); -- cgit v1.1 From 2e10d330f8d5f039fa1e00baf59435ab0f11c722 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sun, 20 Dec 2009 19:07:09 +0100 Subject: mac80211: fix ibss join with fixed-bssid When fixed bssid is requested when joining an ibss network, incoming beacons that match the configured bssid cause mac80211 to create new sta entries, even before the ibss interface is in joined state. When that happens, it fails to bring up the interface entirely, because it checks for existing sta entries before joining. This patch fixes this bug by refusing to create sta info entries before the interface is fully operational. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- net/mac80211/ibss.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'net') diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index 10d1385..1f2db64 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -382,6 +382,7 @@ static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata, struct sta_info *ieee80211_ibss_add_sta(struct ieee80211_sub_if_data *sdata, u8 *bssid,u8 *addr, u32 supp_rates) { + struct ieee80211_if_ibss *ifibss = &sdata->u.ibss; struct ieee80211_local *local = sdata->local; struct sta_info *sta; int band = local->hw.conf.channel->band; @@ -397,6 +398,9 @@ struct sta_info *ieee80211_ibss_add_sta(struct ieee80211_sub_if_data *sdata, return NULL; } + if (ifibss->state == IEEE80211_IBSS_MLME_SEARCH) + return NULL; + if (compare_ether_addr(bssid, sdata->u.ibss.bssid)) return NULL; -- cgit v1.1 From 3bdb2d48c5f58c781a4099c99044384a23620884 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 23 Dec 2009 13:12:05 +0100 Subject: cfg80211: fix race between deauth and assoc response Joseph Nahmias reported, in http://bugs.debian.org/562016, that he was getting the following warning (with some log around the issue): ath0: direct probe to AP 00:11:95:77:e0:b0 (try 1) ath0: direct probe responded ath0: authenticate with AP 00:11:95:77:e0:b0 (try 1) ath0: authenticated ath0: associate with AP 00:11:95:77:e0:b0 (try 1) ath0: deauthenticating from 00:11:95:77:e0:b0 by local choice (reason=3) ath0: direct probe to AP 00:11:95:77:e0:b0 (try 1) ath0: RX AssocResp from 00:11:95:77:e0:b0 (capab=0x421 status=0 aid=2) ath0: associated ------------[ cut here ]------------ WARNING: at net/wireless/mlme.c:97 cfg80211_send_rx_assoc+0x14d/0x152 [cfg80211]() Hardware name: 7658CTO ... Pid: 761, comm: phy0 Not tainted 2.6.32-trunk-686 #1 Call Trace: [] ? warn_slowpath_common+0x5e/0x8a [] ? warn_slowpath_null+0xa/0xc [] ? cfg80211_send_rx_assoc+0x14d/0x152 ... ath0: link becomes ready ath0: deauthenticating from 00:11:95:77:e0:b0 by local choice (reason=3) ath0: no IPv6 routers present ath0: link is not ready ath0: direct probe to AP 00:11:95:77:e0:b0 (try 1) ath0: direct probe responded ath0: authenticate with AP 00:11:95:77:e0:b0 (try 1) ath0: authenticated ath0: associate with AP 00:11:95:77:e0:b0 (try 1) ath0: RX ReassocResp from 00:11:95:77:e0:b0 (capab=0x421 status=0 aid=2) ath0: associated It is not clear to me how the first "direct probe" here happens, but this seems to be a race condition, if the user requests to deauth after requesting assoc, but before the assoc response is received. In that case, it may happen that mac80211 tries to report the assoc success to cfg80211, but gets blocked on the wdev lock that is held because the user is requesting the deauth. The result is that we run into a warning. This is mostly harmless, but maybe cause an unexpected event to be sent to userspace; we'd send an assoc success event although userspace was no longer expecting that. To fix this, remove the warning and check whether the race happened and in that case abort processing. Reported-by: Joseph Nahmias Cc: stable@kernel.org Cc: 562016-quiet@bugs.debian.org Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/wireless/mlme.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) (limited to 'net') diff --git a/net/wireless/mlme.c b/net/wireless/mlme.c index 1001db4..82e6002 100644 --- a/net/wireless/mlme.c +++ b/net/wireless/mlme.c @@ -93,7 +93,18 @@ void cfg80211_send_rx_assoc(struct net_device *dev, const u8 *buf, size_t len) } } - WARN_ON(!bss); + /* + * We might be coming here because the driver reported + * a successful association at the same time as the + * user requested a deauth. In that case, we will have + * removed the BSS from the auth_bsses list due to the + * deauth request when the assoc response makes it. If + * the two code paths acquire the lock the other way + * around, that's just the standard situation of a + * deauth being requested while connected. + */ + if (!bss) + goto out; } else if (wdev->conn) { cfg80211_sme_failed_assoc(wdev); /* -- cgit v1.1 From 65486c8b30498dd274eea2c542696f22b63fe5b8 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 23 Dec 2009 15:33:35 +0100 Subject: cfg80211: fix error path in cfg80211_wext_siwscan If there's an invalid channel or SSID, the code leaks the scan request. Always free the scan request, unless it was successfully given to the driver. Reported-by: Dan Carpenter Signed-off-by: Johannes Berg Acked-by: Dan Carpenter Signed-off-by: John W. Linville --- net/wireless/scan.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) (limited to 'net') diff --git a/net/wireless/scan.c b/net/wireless/scan.c index 12dfa62..0c2cbbe 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -601,7 +601,7 @@ int cfg80211_wext_siwscan(struct net_device *dev, struct cfg80211_registered_device *rdev; struct wiphy *wiphy; struct iw_scan_req *wreq = NULL; - struct cfg80211_scan_request *creq; + struct cfg80211_scan_request *creq = NULL; int i, err, n_channels = 0; enum ieee80211_band band; @@ -694,8 +694,10 @@ int cfg80211_wext_siwscan(struct net_device *dev, /* translate "Scan for SSID" request */ if (wreq) { if (wrqu->data.flags & IW_SCAN_THIS_ESSID) { - if (wreq->essid_len > IEEE80211_MAX_SSID_LEN) - return -EINVAL; + if (wreq->essid_len > IEEE80211_MAX_SSID_LEN) { + err = -EINVAL; + goto out; + } memcpy(creq->ssids[0].ssid, wreq->essid, wreq->essid_len); creq->ssids[0].ssid_len = wreq->essid_len; } @@ -707,12 +709,15 @@ int cfg80211_wext_siwscan(struct net_device *dev, err = rdev->ops->scan(wiphy, dev, creq); if (err) { rdev->scan_req = NULL; - kfree(creq); + /* creq will be freed below */ } else { nl80211_send_scan_start(rdev, dev); + /* creq now owned by driver */ + creq = NULL; dev_hold(dev); } out: + kfree(creq); cfg80211_unlock_rdev(rdev); return err; } -- cgit v1.1 From b98c06b6debfe84c90200143bb1102f312f50a33 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Thu, 24 Dec 2009 15:26:09 -0500 Subject: mac80211: fix race with suspend and dynamic_ps_disable_work When mac80211 suspends it calls a driver's suspend callback as a last step and after that the driver assumes no calls will be made to it until we resume and its start callback is kicked. If such calls are made, however, suspend can end up throwing hardware in an unexpected state and making the device unusable upon resume. Fix this by preventing mac80211 to schedule dynamic_ps_disable_work by checking for when mac80211 starts to suspend and starts quiescing. Frames should be allowed to go through though as that is part of the quiescing steps and we do not flush the mac80211 workqueue since it was already done towards the beginning of suspend cycle. The other mac80211 issue will be hanled in the next patch. For further details see refer to the thread: http://marc.info/?t=126144866100001&r=1&w=2 Cc: stable@kernel.org Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- net/mac80211/tx.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'net') diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 8834cc9..27ceaef 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -1419,6 +1419,10 @@ static bool need_dynamic_ps(struct ieee80211_local *local) if (!local->ps_sdata) return false; + /* No point if we're going to suspend */ + if (local->quiescing) + return false; + return true; } -- cgit v1.1 From 24feda0084722189468a65e20019cdd8ef99702b Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Thu, 24 Dec 2009 15:38:22 -0500 Subject: mac80211: fix propagation of failed hardware reconfigurations mac80211 does not propagate failed hardware reconfiguration requests. For suspend and resume this is important due to all the possible issues that can come out of the suspend <-> resume cycle. Not propagating the error means cfg80211 will assume the resume for the device went through fine and mac80211 will continue on trying to poke at the hardware, enable timers, queue work, and so on for a device which is completley unfunctional. The least we can do is to propagate device start issues and warn when this occurs upon resume. A side effect of this patch is we also now propagate the start errors upon harware reconfigurations (non-suspend), but this should also be desirable anyway, there is not point in continuing to reconfigure a device if mac80211 was unable to start the device. For further details refer to the thread: http://marc.info/?t=126151038700001&r=1&w=2 Cc: stable@kernel.org Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- net/mac80211/util.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'net') diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 78a6e92..dc76267 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -1039,7 +1039,19 @@ int ieee80211_reconfig(struct ieee80211_local *local) /* restart hardware */ if (local->open_count) { + /* + * Upon resume hardware can sometimes be goofy due to + * various platform / driver / bus issues, so restarting + * the device may at times not work immediately. Propagate + * the error. + */ res = drv_start(local); + if (res) { + WARN(local->suspended, "Harware became unavailable " + "upon resume. This is could be a software issue" + "prior to suspend or a harware issue\n"); + return res; + } ieee80211_led_radio(local, true); } -- cgit v1.1 From b292cf9ce70d221c3f04ff62db5ab13d9a249ca8 Mon Sep 17 00:00:00 2001 From: Xiaotian Feng Date: Thu, 31 Dec 2009 10:52:36 +0800 Subject: sunrpc: fix peername failed on closed listener There're some warnings of "nfsd: peername failed (err 107)!" socket error -107 means Transport endpoint is not connected. This warning message was outputed by svc_tcp_accept() [net/sunrpc/svcsock.c], when kernel_getpeername returns -107. This means socket might be CLOSED. And svc_tcp_accept was called by svc_recv() [net/sunrpc/svc_xprt.c] if (test_bit(XPT_LISTENER, &xprt->xpt_flags)) { newxpt = xprt->xpt_ops->xpo_accept(xprt); So this might happen when xprt->xpt_flags has both XPT_LISTENER and XPT_CLOSE. Let's take a look at commit b0401d72, this commit has moved the close processing after do recvfrom method, but this commit also introduces this warnings, if the xpt_flags has both XPT_LISTENER and XPT_CLOSED, we should close it, not accpet then close. Signed-off-by: Xiaotian Feng Cc: J. Bruce Fields Cc: Neil Brown Cc: Trond Myklebust Cc: David S. Miller Cc: stable@kernel.org Signed-off-by: J. Bruce Fields --- net/sunrpc/svc_xprt.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'net') diff --git a/net/sunrpc/svc_xprt.c b/net/sunrpc/svc_xprt.c index 2c58b75..810ffe8 100644 --- a/net/sunrpc/svc_xprt.c +++ b/net/sunrpc/svc_xprt.c @@ -699,7 +699,8 @@ int svc_recv(struct svc_rqst *rqstp, long timeout) spin_unlock_bh(&pool->sp_lock); len = 0; - if (test_bit(XPT_LISTENER, &xprt->xpt_flags)) { + if (test_bit(XPT_LISTENER, &xprt->xpt_flags) && + !test_bit(XPT_CLOSE, &xprt->xpt_flags)) { struct svc_xprt *newxpt; newxpt = xprt->xpt_ops->xpo_accept(xprt); if (newxpt) { -- cgit v1.1