From 82c0cc90d6268a3cd3ee058257d2146188326452 Mon Sep 17 00:00:00 2001 From: Arik Nemtsov Date: Sat, 15 Aug 2015 22:39:46 +0300 Subject: mac80211: debugfs: add file to disallow TDLS wider-bw Sometimes we are interested in testing TDLS performance in a specific width setting. Add the ability to disable the wider-band feature, thereby allowing the TDLS channel width to be controlled by the BSS width. Signed-off-by: Arik Nemtsov Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- net/mac80211/cfg.c | 1 + 1 file changed, 1 insertion(+) (limited to 'net/mac80211/cfg.c') diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 685ec13..1ca972e 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1156,6 +1156,7 @@ static int sta_apply_parameters(struct ieee80211_local *local, set_sta_flag(sta, WLAN_STA_TDLS_CHAN_SWITCH); if (test_sta_flag(sta, WLAN_STA_TDLS_PEER) && + !sdata->u.mgd.tdls_wider_bw_prohibited && ieee80211_hw_check(&local->hw, TDLS_WIDER_BW) && params->ext_capab_len >= 8 && params->ext_capab[7] & WLAN_EXT_CAPA8_TDLS_WIDE_BW_ENABLED) -- cgit v1.1 From 1b09b5568e5f46c6dfb781d7c1dfad431a6d8ec1 Mon Sep 17 00:00:00 2001 From: Andrei Otcheretianski Date: Sat, 15 Aug 2015 22:39:50 +0300 Subject: mac80211: introduce per vif frame registration API Currently the cfg80211's frame registration api receives wdev, however mac80211 assumes per device filter configuration and ignores wdev. Per device filtering is too wasteful, especially for multi-channel devices. Introduce new per vif frame registration API and use it for probe request registrations in ieee80211_mgmt_frame_register() Also call directly to ieee80211_configure_filter instead of using a work since it is now allowed to sleep in ieee80211_mgmt_frame_register. Signed-off-by: Andrei Otcheretianski Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- net/mac80211/cfg.c | 22 ++++++++++++++++++---- 1 file changed, 18 insertions(+), 4 deletions(-) (limited to 'net/mac80211/cfg.c') diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 1ca972e..9eab783 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -3516,18 +3516,32 @@ static void ieee80211_mgmt_frame_register(struct wiphy *wiphy, u16 frame_type, bool reg) { struct ieee80211_local *local = wiphy_priv(wiphy); + struct ieee80211_sub_if_data *sdata = IEEE80211_WDEV_TO_SUB_IF(wdev); switch (frame_type) { case IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_PROBE_REQ: - if (reg) + if (reg) { local->probe_req_reg++; - else - local->probe_req_reg--; + sdata->vif.probe_req_reg++; + } else { + if (local->probe_req_reg) + local->probe_req_reg--; + + if (sdata->vif.probe_req_reg) + sdata->vif.probe_req_reg--; + } if (!local->open_count) break; - ieee80211_queue_work(&local->hw, &local->reconfig_filter); + if (sdata->vif.probe_req_reg == 1) + drv_config_iface_filter(local, sdata, FIF_PROBE_REQ, + FIF_PROBE_REQ); + else if (sdata->vif.probe_req_reg == 0) + drv_config_iface_filter(local, sdata, 0, + FIF_PROBE_REQ); + + ieee80211_configure_filter(local); break; default: break; -- cgit v1.1 From 44674d9c2267f454f38df7b2395939bfa911f92e Mon Sep 17 00:00:00 2001 From: Ayala Beker Date: Wed, 23 Sep 2015 10:41:27 +0200 Subject: mac80211: advertise support for full station state in AP mode This enables adding stations in unauthenticated mode, just after receiving the first authentication frame; which in turn allows sending a negative authentication reply if the station cannot be added. In addition init rate control for unassociated station only when it becomes associated, prior to that low rates will be used. Signed-off-by: Ayala Beker Signed-off-by: Johannes Berg --- net/mac80211/cfg.c | 33 ++++++++++++++++++++++----------- 1 file changed, 22 insertions(+), 11 deletions(-) (limited to 'net/mac80211/cfg.c') diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 9eab783..1b91fcd 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -981,7 +981,7 @@ static int sta_apply_auth_flags(struct ieee80211_local *local, * well. Some drivers require rate control initialized * before drv_sta_state() is called. */ - if (test_sta_flag(sta, WLAN_STA_TDLS_PEER)) + if (!test_sta_flag(sta, WLAN_STA_RATE_CONTROL)) rate_control_rate_init(sta); ret = sta_info_move_state(sta, IEEE80211_STA_ASSOC); @@ -1120,8 +1120,11 @@ static int sta_apply_parameters(struct ieee80211_local *local, local->hw.queues >= IEEE80211_NUM_ACS) sta->sta.wme = set & BIT(NL80211_STA_FLAG_WME); - /* auth flags will be set later for TDLS stations */ - if (!test_sta_flag(sta, WLAN_STA_TDLS_PEER)) { + /* auth flags will be set later for TDLS, + * and for unassociated stations that move to assocaited */ + if (!test_sta_flag(sta, WLAN_STA_TDLS_PEER) && + !((mask & BIT(NL80211_STA_FLAG_ASSOCIATED)) && + (set & BIT(NL80211_STA_FLAG_ASSOCIATED)))) { ret = sta_apply_auth_flags(local, sta, mask, set); if (ret) return ret; @@ -1213,7 +1216,8 @@ static int sta_apply_parameters(struct ieee80211_local *local, sta_apply_mesh_params(local, sta, params); /* set the STA state after all sta info from usermode has been set */ - if (test_sta_flag(sta, WLAN_STA_TDLS_PEER)) { + if (test_sta_flag(sta, WLAN_STA_TDLS_PEER) || + set & BIT(NL80211_STA_FLAG_ASSOCIATED)) { ret = sta_apply_auth_flags(local, sta, mask, set); if (ret) return ret; @@ -1255,12 +1259,14 @@ static int ieee80211_add_station(struct wiphy *wiphy, struct net_device *dev, * defaults -- if userspace wants something else we'll * change it accordingly in sta_apply_parameters() */ - if (!(params->sta_flags_set & BIT(NL80211_STA_FLAG_TDLS_PEER))) { + if (!(params->sta_flags_set & BIT(NL80211_STA_FLAG_TDLS_PEER)) && + !(params->sta_flags_set & (BIT(NL80211_STA_FLAG_AUTHENTICATED) | + BIT(NL80211_STA_FLAG_ASSOCIATED)))) { sta_info_pre_move_state(sta, IEEE80211_STA_AUTH); sta_info_pre_move_state(sta, IEEE80211_STA_ASSOC); - } else { - sta->sta.tdls = true; } + if (params->sta_flags_set & BIT(NL80211_STA_FLAG_TDLS_PEER)) + sta->sta.tdls = true; err = sta_apply_parameters(local, sta, params); if (err) { @@ -1269,10 +1275,12 @@ static int ieee80211_add_station(struct wiphy *wiphy, struct net_device *dev, } /* - * for TDLS, rate control should be initialized only when - * rates are known and station is marked authorized + * for TDLS and for unassociated station, rate control should be + * initialized only when rates are known and station is marked + * authorized/associated */ - if (!test_sta_flag(sta, WLAN_STA_TDLS_PEER)) + if (!test_sta_flag(sta, WLAN_STA_TDLS_PEER) && + test_sta_flag(sta, WLAN_STA_ASSOC)) rate_control_rate_init(sta); layer2_update = sdata->vif.type == NL80211_IFTYPE_AP_VLAN || @@ -1347,7 +1355,10 @@ static int ieee80211_change_station(struct wiphy *wiphy, break; case NL80211_IFTYPE_AP: case NL80211_IFTYPE_AP_VLAN: - statype = CFG80211_STA_AP_CLIENT; + if (test_sta_flag(sta, WLAN_STA_ASSOC)) + statype = CFG80211_STA_AP_CLIENT; + else + statype = CFG80211_STA_AP_CLIENT_UNASSOC; break; default: err = -EOPNOTSUPP; -- cgit v1.1