From 9b2777d6089bcd7fb035847f907280560fe233c8 Mon Sep 17 00:00:00 2001 From: Phoebe Buckheister Date: Mon, 17 Feb 2014 11:34:08 +0100 Subject: ieee802154: add TX power control to wpan_phy Replace the current u8 transmit_power in wpan_phy with s8 transmit_power. The u8 field contained the actual tx power and a tolerance field, which no physical radio every used. Adjust sysfs entries to keep compatibility with userspace, give tolerances of +-1dB statically there. This patch only adds support for this in the at86rf230 driver and the RF212 chip. Configuration calculation for RF212 is also somewhat basic, but does the job - the RF212 datasheet gives a large table with suggested values for combinations of TX power and page/channel, if this does not work well, we might have to copy the whole table. Signed-off-by: Phoebe Buckheister Signed-off-by: David S. Miller --- net/ieee802154/wpan-class.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'net/ieee802154/wpan-class.c') diff --git a/net/ieee802154/wpan-class.c b/net/ieee802154/wpan-class.c index 4dd3761..8d6f670 100644 --- a/net/ieee802154/wpan-class.c +++ b/net/ieee802154/wpan-class.c @@ -44,9 +44,7 @@ static DEVICE_ATTR_RO(name); MASTER_SHOW(current_channel, "%d"); MASTER_SHOW(current_page, "%d"); -MASTER_SHOW_COMPLEX(transmit_power, "%d +- %d dB", - ((signed char) (phy->transmit_power << 2)) >> 2, - (phy->transmit_power >> 6) ? (phy->transmit_power >> 6) * 3 : 1); +MASTER_SHOW(transmit_power, "%d +- 1 dB"); MASTER_SHOW(cca_mode, "%d"); static ssize_t channels_supported_show(struct device *dev, -- cgit v1.1