From cc30c16344fc3a25153175c7eb9037b2136cd466 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Fri, 20 Nov 2015 03:56:23 +0100 Subject: net: dsa: Add support for a switch reset gpio Some boards have a gpio line tied to the switch reset pin. Allow this gpio to be retrieved from the device tree, and take the switch out of reset before performing the probe. Signed-off-by: Andrew Lunn Signed-off-by: David S. Miller --- net/dsa/dsa.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'net/dsa') diff --git a/net/dsa/dsa.c b/net/dsa/dsa.c index 1eba07f..0b5565f 100644 --- a/net/dsa/dsa.c +++ b/net/dsa/dsa.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include #include "dsa_priv.h" @@ -688,6 +689,9 @@ static int dsa_of_probe(struct device *dev) const char *port_name; int chip_index, port_index; const unsigned int *sw_addr, *port_reg; + int gpio; + enum of_gpio_flags of_flags; + unsigned long flags; u32 eeprom_len; int ret; @@ -766,6 +770,19 @@ static int dsa_of_probe(struct device *dev) put_device(cd->host_dev); cd->host_dev = &mdio_bus_switch->dev; } + gpio = of_get_named_gpio_flags(child, "reset-gpios", 0, + &of_flags); + if (gpio_is_valid(gpio)) { + flags = (of_flags == OF_GPIO_ACTIVE_LOW ? + GPIOF_ACTIVE_LOW : 0); + ret = devm_gpio_request_one(dev, gpio, flags, + "switch_reset"); + if (ret) + goto out_free_chip; + + cd->reset = gpio_to_desc(gpio); + gpiod_direction_output(cd->reset, 0); + } for_each_available_child_of_node(child, port) { port_reg = of_get_property(port, "reg", NULL); -- cgit v1.1