From 1b2439dbb703ae8d95a9ce7ece6b7800b80f41f0 Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Fri, 15 Aug 2008 15:29:38 -0700 Subject: debug: add notifier chain debugging during some development we suspected a case where we left something in a notifier chain that was from a module that was unloaded already... and that sort of thing is rather hard to track down. This patch adds a very simple sanity check (which isn't all that expensive) to make sure the notifier we're about to call is actually from either the kernel itself of from a still-loaded module, avoiding a hard-to-chase-down crash. Signed-off-by: Arjan van de Ven Signed-off-by: Ingo Molnar --- lib/Kconfig.debug | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'lib') diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index 8b5a7d3..342858f 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -536,6 +536,16 @@ config DEBUG_SG If unsure, say N. +config DEBUG_NOTIFIERS + bool "Debug notifier call chains" + depends on DEBUG_KERNEL + help + Enable this to turn on sanity checking for notifier call chains. + This is most useful for kernel developers to make sure that + modules properly unregister themselves from notifier chains. + This is a relatively cheap check but if you care about maximum + performance, say N. + config FRAME_POINTER bool "Compile the kernel with frame pointers" depends on DEBUG_KERNEL && \ -- cgit v1.1 From ab7476cf76e560f0efda2a631a70aabe93009025 Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Fri, 15 Aug 2008 15:29:38 -0700 Subject: debug: add notifier chain debugging, v2 - unbreak ia64 (and powerpc) where function pointers dont point at code but at data (reported by Tony Luck) [ mingo@elte.hu: various cleanups ] Signed-off-by: Arjan van de Ven Signed-off-by: Ingo Molnar --- lib/vsprintf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'lib') diff --git a/lib/vsprintf.c b/lib/vsprintf.c index d8d1d11..f5e5ffb 100644 --- a/lib/vsprintf.c +++ b/lib/vsprintf.c @@ -513,7 +513,7 @@ static char *string(char *buf, char *end, char *s, int field_width, int precisio return buf; } -static inline void *dereference_function_descriptor(void *ptr) +void *dereference_function_descriptor(void *ptr) { #if defined(CONFIG_IA64) || defined(CONFIG_PPC64) void *p; -- cgit v1.1 From 3ae7020543db0b769538e64d1ce8d51fceff60ca Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Wed, 26 Nov 2008 10:02:00 +0100 Subject: debugobjects: add boot parameter default value Impact: add .config driven boot parameter default value Right now debugobjects can only be activated if the debug_objects boot parameter is passed in via the boot command line. Make this more convenient (and randomizable) by also providing a .config method. Enable it by default. (DEBUG_OBJECTS itself is default-off) Signed-off-by: Ingo Molnar --- lib/Kconfig.debug | 8 ++++++++ lib/debugobjects.c | 4 +++- 2 files changed, 11 insertions(+), 1 deletion(-) (limited to 'lib') diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index b0f239e..124ece1 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -252,6 +252,14 @@ config DEBUG_OBJECTS_TIMERS timer routines to track the life time of timer objects and validate the timer operations. +config DEBUG_OBJECTS_ENABLE_DEFAULT + int "debug_objects bootup default value (0-1)" + range 0 1 + default "1" + depends on DEBUG_OBJECTS + help + Debug objects boot parameter default value + config DEBUG_SLAB bool "Debug slab memory allocations" depends on DEBUG_KERNEL && SLAB diff --git a/lib/debugobjects.c b/lib/debugobjects.c index e3ab374..5d99be1 100644 --- a/lib/debugobjects.c +++ b/lib/debugobjects.c @@ -45,7 +45,9 @@ static struct kmem_cache *obj_cache; static int debug_objects_maxchain __read_mostly; static int debug_objects_fixups __read_mostly; static int debug_objects_warnings __read_mostly; -static int debug_objects_enabled __read_mostly; +static int debug_objects_enabled __read_mostly + = CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT; + static struct debug_obj_descr *descr_test __read_mostly; static int __init enable_object_debug(char *str) -- cgit v1.1 From 8c5df16bec8a60bb8589fc232b9e26cac0ed4b2c Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Tue, 16 Dec 2008 12:17:26 -0800 Subject: swiotlb: allow architectures to override swiotlb pool allocation Impact: generalize swiotlb allocation code Architectures may need to allocate memory specially for use with the swiotlb. Create the weak function swiotlb_alloc_boot() and swiotlb_alloc() defaulting to the current behaviour. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Ian Campbell Signed-off-by: Ingo Molnar --- lib/swiotlb.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) (limited to 'lib') diff --git a/lib/swiotlb.c b/lib/swiotlb.c index 5f6c629..abecb28 100644 --- a/lib/swiotlb.c +++ b/lib/swiotlb.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include #include @@ -126,6 +127,16 @@ setup_io_tlb_npages(char *str) __setup("swiotlb=", setup_io_tlb_npages); /* make io_tlb_overflow tunable too? */ +void * __weak swiotlb_alloc_boot(size_t size, unsigned long nslabs) +{ + return alloc_bootmem_low_pages(size); +} + +void * __weak swiotlb_alloc(unsigned order, unsigned long nslabs) +{ + return (void *)__get_free_pages(GFP_DMA | __GFP_NOWARN, order); +} + /* * Statically reserve bounce buffer space and initialize bounce buffer data * structures for the software IO TLB used to implement the DMA API. @@ -145,7 +156,7 @@ swiotlb_init_with_default_size(size_t default_size) /* * Get IO TLB memory from the low pages */ - io_tlb_start = alloc_bootmem_low_pages(bytes); + io_tlb_start = swiotlb_alloc_boot(bytes, io_tlb_nslabs); if (!io_tlb_start) panic("Cannot allocate SWIOTLB buffer"); io_tlb_end = io_tlb_start + bytes; @@ -202,8 +213,7 @@ swiotlb_late_init_with_default_size(size_t default_size) bytes = io_tlb_nslabs << IO_TLB_SHIFT; while ((SLABS_PER_PAGE << order) > IO_TLB_MIN_SLABS) { - io_tlb_start = (char *)__get_free_pages(GFP_DMA | __GFP_NOWARN, - order); + io_tlb_start = swiotlb_alloc(order, io_tlb_nslabs); if (io_tlb_start) break; order--; -- cgit v1.1 From 0016fdee927f7aa0f428494bcf11ae60c7470a02 Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Tue, 16 Dec 2008 12:17:27 -0800 Subject: swiotlb: move some definitions to header Impact: cleanup Signed-off-by: Ian Campbell Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Ingo Molnar --- lib/swiotlb.c | 14 +------------- 1 file changed, 1 insertion(+), 13 deletions(-) (limited to 'lib') diff --git a/lib/swiotlb.c b/lib/swiotlb.c index abecb28..db724ba 100644 --- a/lib/swiotlb.c +++ b/lib/swiotlb.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include @@ -40,19 +41,6 @@ #define SG_ENT_VIRT_ADDRESS(sg) (sg_virt((sg))) #define SG_ENT_PHYS_ADDRESS(sg) virt_to_bus(SG_ENT_VIRT_ADDRESS(sg)) -/* - * Maximum allowable number of contiguous slabs to map, - * must be a power of 2. What is the appropriate value ? - * The complexity of {map,unmap}_single is linearly dependent on this value. - */ -#define IO_TLB_SEGSIZE 128 - -/* - * log of the size of each IO TLB slab. The number of slabs is command line - * controllable. - */ -#define IO_TLB_SHIFT 11 - #define SLABS_PER_PAGE (1 << (PAGE_SHIFT - IO_TLB_SHIFT)) /* -- cgit v1.1 From a5ddde4a558b3bd1e3dc50e274a0db2ea7a8fd06 Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Tue, 16 Dec 2008 12:17:29 -0800 Subject: swiotlb: add comment where we handle the overflow of a dma mask on 32 bit Impact: cleanup Signed-off-by: Ian Campbell Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Ingo Molnar --- lib/swiotlb.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'lib') diff --git a/lib/swiotlb.c b/lib/swiotlb.c index db724ba..1272b23 100644 --- a/lib/swiotlb.c +++ b/lib/swiotlb.c @@ -301,6 +301,10 @@ map_single(struct device *hwdev, char *buffer, size_t size, int dir) start_dma_addr = virt_to_bus(io_tlb_start) & mask; offset_slots = ALIGN(start_dma_addr, 1 << IO_TLB_SHIFT) >> IO_TLB_SHIFT; + + /* + * Carefully handle integer overflow which can occur when mask == ~0UL. + */ max_slots = mask + 1 ? ALIGN(mask + 1, 1 << IO_TLB_SHIFT) >> IO_TLB_SHIFT : 1UL << (BITS_PER_LONG - IO_TLB_SHIFT); -- cgit v1.1 From e08e1f7adba522378e8d2ae941bf25443866136d Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Tue, 16 Dec 2008 12:17:30 -0800 Subject: swiotlb: allow architectures to override phys<->bus<->phys conversions Impact: generalize phys<->bus<->phys conversions in the swiotlb code Architectures may need to override these conversions. Implement a __weak hook point containing the default implementation. Signed-off-by: Ian Campbell Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Ingo Molnar --- lib/swiotlb.c | 52 ++++++++++++++++++++++++++++++++++++---------------- 1 file changed, 36 insertions(+), 16 deletions(-) (limited to 'lib') diff --git a/lib/swiotlb.c b/lib/swiotlb.c index 1272b23..3494263 100644 --- a/lib/swiotlb.c +++ b/lib/swiotlb.c @@ -125,6 +125,26 @@ void * __weak swiotlb_alloc(unsigned order, unsigned long nslabs) return (void *)__get_free_pages(GFP_DMA | __GFP_NOWARN, order); } +dma_addr_t __weak swiotlb_phys_to_bus(phys_addr_t paddr) +{ + return paddr; +} + +phys_addr_t __weak swiotlb_bus_to_phys(dma_addr_t baddr) +{ + return baddr; +} + +static dma_addr_t swiotlb_virt_to_bus(volatile void *address) +{ + return swiotlb_phys_to_bus(virt_to_phys(address)); +} + +static void *swiotlb_bus_to_virt(dma_addr_t address) +{ + return phys_to_virt(swiotlb_bus_to_phys(address)); +} + /* * Statically reserve bounce buffer space and initialize bounce buffer data * structures for the software IO TLB used to implement the DMA API. @@ -168,7 +188,7 @@ swiotlb_init_with_default_size(size_t default_size) panic("Cannot allocate SWIOTLB overflow buffer!\n"); printk(KERN_INFO "Placing software IO TLB between 0x%lx - 0x%lx\n", - virt_to_bus(io_tlb_start), virt_to_bus(io_tlb_end)); + swiotlb_virt_to_bus(io_tlb_start), swiotlb_virt_to_bus(io_tlb_end)); } void __init @@ -250,7 +270,7 @@ swiotlb_late_init_with_default_size(size_t default_size) printk(KERN_INFO "Placing %luMB software IO TLB between 0x%lx - " "0x%lx\n", bytes >> 20, - virt_to_bus(io_tlb_start), virt_to_bus(io_tlb_end)); + swiotlb_virt_to_bus(io_tlb_start), swiotlb_virt_to_bus(io_tlb_end)); return 0; @@ -298,7 +318,7 @@ map_single(struct device *hwdev, char *buffer, size_t size, int dir) unsigned long max_slots; mask = dma_get_seg_boundary(hwdev); - start_dma_addr = virt_to_bus(io_tlb_start) & mask; + start_dma_addr = swiotlb_virt_to_bus(io_tlb_start) & mask; offset_slots = ALIGN(start_dma_addr, 1 << IO_TLB_SHIFT) >> IO_TLB_SHIFT; @@ -475,7 +495,7 @@ swiotlb_alloc_coherent(struct device *hwdev, size_t size, dma_mask = hwdev->coherent_dma_mask; ret = (void *)__get_free_pages(flags, order); - if (ret && !is_buffer_dma_capable(dma_mask, virt_to_bus(ret), size)) { + if (ret && !is_buffer_dma_capable(dma_mask, swiotlb_virt_to_bus(ret), size)) { /* * The allocated memory isn't reachable by the device. * Fall back on swiotlb_map_single(). @@ -496,7 +516,7 @@ swiotlb_alloc_coherent(struct device *hwdev, size_t size, } memset(ret, 0, size); - dev_addr = virt_to_bus(ret); + dev_addr = swiotlb_virt_to_bus(ret); /* Confirm address can be DMA'd by device */ if (!is_buffer_dma_capable(dma_mask, dev_addr, size)) { @@ -556,7 +576,7 @@ dma_addr_t swiotlb_map_single_attrs(struct device *hwdev, void *ptr, size_t size, int dir, struct dma_attrs *attrs) { - dma_addr_t dev_addr = virt_to_bus(ptr); + dma_addr_t dev_addr = swiotlb_virt_to_bus(ptr); void *map; BUG_ON(dir == DMA_NONE); @@ -577,7 +597,7 @@ swiotlb_map_single_attrs(struct device *hwdev, void *ptr, size_t size, map = io_tlb_overflow_buffer; } - dev_addr = virt_to_bus(map); + dev_addr = swiotlb_virt_to_bus(map); /* * Ensure that the address returned is DMA'ble @@ -607,7 +627,7 @@ void swiotlb_unmap_single_attrs(struct device *hwdev, dma_addr_t dev_addr, size_t size, int dir, struct dma_attrs *attrs) { - char *dma_addr = bus_to_virt(dev_addr); + char *dma_addr = swiotlb_bus_to_virt(dev_addr); BUG_ON(dir == DMA_NONE); if (is_swiotlb_buffer(dma_addr)) @@ -637,7 +657,7 @@ static void swiotlb_sync_single(struct device *hwdev, dma_addr_t dev_addr, size_t size, int dir, int target) { - char *dma_addr = bus_to_virt(dev_addr); + char *dma_addr = swiotlb_bus_to_virt(dev_addr); BUG_ON(dir == DMA_NONE); if (is_swiotlb_buffer(dma_addr)) @@ -668,7 +688,7 @@ swiotlb_sync_single_range(struct device *hwdev, dma_addr_t dev_addr, unsigned long offset, size_t size, int dir, int target) { - char *dma_addr = bus_to_virt(dev_addr) + offset; + char *dma_addr = swiotlb_bus_to_virt(dev_addr) + offset; BUG_ON(dir == DMA_NONE); if (is_swiotlb_buffer(dma_addr)) @@ -724,7 +744,7 @@ swiotlb_map_sg_attrs(struct device *hwdev, struct scatterlist *sgl, int nelems, for_each_sg(sgl, sg, nelems, i) { addr = SG_ENT_VIRT_ADDRESS(sg); - dev_addr = virt_to_bus(addr); + dev_addr = swiotlb_virt_to_bus(addr); if (swiotlb_force || address_needs_mapping(hwdev, dev_addr, sg->length)) { void *map = map_single(hwdev, addr, sg->length, dir); @@ -737,7 +757,7 @@ swiotlb_map_sg_attrs(struct device *hwdev, struct scatterlist *sgl, int nelems, sgl[0].dma_length = 0; return 0; } - sg->dma_address = virt_to_bus(map); + sg->dma_address = swiotlb_virt_to_bus(map); } else sg->dma_address = dev_addr; sg->dma_length = sg->length; @@ -768,7 +788,7 @@ swiotlb_unmap_sg_attrs(struct device *hwdev, struct scatterlist *sgl, for_each_sg(sgl, sg, nelems, i) { if (sg->dma_address != SG_ENT_PHYS_ADDRESS(sg)) - unmap_single(hwdev, bus_to_virt(sg->dma_address), + unmap_single(hwdev, swiotlb_bus_to_virt(sg->dma_address), sg->dma_length, dir); else if (dir == DMA_FROM_DEVICE) dma_mark_clean(SG_ENT_VIRT_ADDRESS(sg), sg->dma_length); @@ -801,7 +821,7 @@ swiotlb_sync_sg(struct device *hwdev, struct scatterlist *sgl, for_each_sg(sgl, sg, nelems, i) { if (sg->dma_address != SG_ENT_PHYS_ADDRESS(sg)) - sync_single(hwdev, bus_to_virt(sg->dma_address), + sync_single(hwdev, swiotlb_bus_to_virt(sg->dma_address), sg->dma_length, dir, target); else if (dir == DMA_FROM_DEVICE) dma_mark_clean(SG_ENT_VIRT_ADDRESS(sg), sg->dma_length); @@ -825,7 +845,7 @@ swiotlb_sync_sg_for_device(struct device *hwdev, struct scatterlist *sg, int swiotlb_dma_mapping_error(struct device *hwdev, dma_addr_t dma_addr) { - return (dma_addr == virt_to_bus(io_tlb_overflow_buffer)); + return (dma_addr == swiotlb_virt_to_bus(io_tlb_overflow_buffer)); } /* @@ -837,7 +857,7 @@ swiotlb_dma_mapping_error(struct device *hwdev, dma_addr_t dma_addr) int swiotlb_dma_supported(struct device *hwdev, u64 mask) { - return virt_to_bus(io_tlb_end - 1) <= mask; + return swiotlb_virt_to_bus(io_tlb_end - 1) <= mask; } EXPORT_SYMBOL(swiotlb_map_single); -- cgit v1.1 From b81ea27b2329bf44b30c427800954f845896d476 Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Tue, 16 Dec 2008 12:17:31 -0800 Subject: swiotlb: add arch hook to force mapping Impact: generalize the sw-IOTLB range checks Some architectures require special rules to determine whether a range needs mapping or not. This adds a weak function for architectures to override. Signed-off-by: Ian Campbell Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Ingo Molnar --- lib/swiotlb.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) (limited to 'lib') diff --git a/lib/swiotlb.c b/lib/swiotlb.c index 3494263..d8b0905 100644 --- a/lib/swiotlb.c +++ b/lib/swiotlb.c @@ -145,6 +145,11 @@ static void *swiotlb_bus_to_virt(dma_addr_t address) return phys_to_virt(swiotlb_bus_to_phys(address)); } +int __weak swiotlb_arch_range_needs_mapping(void *ptr, size_t size) +{ + return 0; +} + /* * Statically reserve bounce buffer space and initialize bounce buffer data * structures for the software IO TLB used to implement the DMA API. @@ -297,6 +302,11 @@ address_needs_mapping(struct device *hwdev, dma_addr_t addr, size_t size) return !is_buffer_dma_capable(dma_get_mask(hwdev), addr, size); } +static inline int range_needs_mapping(void *ptr, size_t size) +{ + return swiotlb_force || swiotlb_arch_range_needs_mapping(ptr, size); +} + static int is_swiotlb_buffer(char *addr) { return addr >= io_tlb_start && addr < io_tlb_end; @@ -585,7 +595,8 @@ swiotlb_map_single_attrs(struct device *hwdev, void *ptr, size_t size, * we can safely return the device addr and not worry about bounce * buffering it. */ - if (!address_needs_mapping(hwdev, dev_addr, size) && !swiotlb_force) + if (!address_needs_mapping(hwdev, dev_addr, size) && + !range_needs_mapping(ptr, size)) return dev_addr; /* @@ -745,7 +756,7 @@ swiotlb_map_sg_attrs(struct device *hwdev, struct scatterlist *sgl, int nelems, for_each_sg(sgl, sg, nelems, i) { addr = SG_ENT_VIRT_ADDRESS(sg); dev_addr = swiotlb_virt_to_bus(addr); - if (swiotlb_force || + if (range_needs_mapping(sg_virt(sg), sg->length) || address_needs_mapping(hwdev, dev_addr, sg->length)) { void *map = map_single(hwdev, addr, sg->length, dir); if (!map) { -- cgit v1.1 From 1b548f667c1487d92e794a9f7a67788f49b952d8 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Tue, 16 Dec 2008 12:17:32 -0800 Subject: swiotlb: factor out copy to/from device Impact: generalize IO bounce memcpys Signed-off-by: Ian Campbell Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Ingo Molnar --- lib/swiotlb.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) (limited to 'lib') diff --git a/lib/swiotlb.c b/lib/swiotlb.c index d8b0905..a0b4039 100644 --- a/lib/swiotlb.c +++ b/lib/swiotlb.c @@ -312,6 +312,15 @@ static int is_swiotlb_buffer(char *addr) return addr >= io_tlb_start && addr < io_tlb_end; } +static void +__sync_single(char *buffer, char *dma_addr, size_t size, int dir) +{ + if (dir == DMA_TO_DEVICE) + memcpy(dma_addr, buffer, size); + else + memcpy(buffer, dma_addr, size); +} + /* * Allocates bounce buffer and returns its kernel virtual address. */ @@ -413,7 +422,7 @@ found: for (i = 0; i < nslots; i++) io_tlb_orig_addr[index+i] = buffer + (i << IO_TLB_SHIFT); if (dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL) - memcpy(dma_addr, buffer, size); + __sync_single(buffer, dma_addr, size, DMA_TO_DEVICE); return dma_addr; } @@ -437,7 +446,7 @@ unmap_single(struct device *hwdev, char *dma_addr, size_t size, int dir) * bounce... copy the data back into the original buffer * and * delete the bounce buffer. */ - memcpy(buffer, dma_addr, size); + __sync_single(buffer, dma_addr, size, DMA_FROM_DEVICE); /* * Return the buffer to the free list by setting the corresponding @@ -477,13 +486,13 @@ sync_single(struct device *hwdev, char *dma_addr, size_t size, switch (target) { case SYNC_FOR_CPU: if (likely(dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL)) - memcpy(buffer, dma_addr, size); + __sync_single(buffer, dma_addr, size, DMA_FROM_DEVICE); else BUG_ON(dir != DMA_TO_DEVICE); break; case SYNC_FOR_DEVICE: if (likely(dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL)) - memcpy(dma_addr, buffer, size); + __sync_single(buffer, dma_addr, size, DMA_TO_DEVICE); else BUG_ON(dir != DMA_FROM_DEVICE); break; -- cgit v1.1 From ef9b189352f2eb78f14e52996f4780a523b04a49 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Tue, 16 Dec 2008 12:17:33 -0800 Subject: swiotlb: support bouncing of HighMem pages Impact: prepare the swiotlb code for HighMem struct pages This requires us to treat DMA regions in terms of page+offset rather than virtual addressing since a HighMem page may not have a mapping. Signed-off-by: Ian Campbell Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Ingo Molnar --- lib/swiotlb.c | 122 ++++++++++++++++++++++++++++++++++++++++++---------------- 1 file changed, 89 insertions(+), 33 deletions(-) (limited to 'lib') diff --git a/lib/swiotlb.c b/lib/swiotlb.c index a0b4039..1661af5 100644 --- a/lib/swiotlb.c +++ b/lib/swiotlb.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include @@ -38,9 +39,6 @@ #define OFFSET(val,align) ((unsigned long) \ ( (val) & ( (align) - 1))) -#define SG_ENT_VIRT_ADDRESS(sg) (sg_virt((sg))) -#define SG_ENT_PHYS_ADDRESS(sg) virt_to_bus(SG_ENT_VIRT_ADDRESS(sg)) - #define SLABS_PER_PAGE (1 << (PAGE_SHIFT - IO_TLB_SHIFT)) /* @@ -91,7 +89,10 @@ static unsigned int io_tlb_index; * We need to save away the original address corresponding to a mapped entry * for the sync operations. */ -static unsigned char **io_tlb_orig_addr; +static struct swiotlb_phys_addr { + struct page *page; + unsigned int offset; +} *io_tlb_orig_addr; /* * Protect the above data structures in the map and unmap calls @@ -150,6 +151,11 @@ int __weak swiotlb_arch_range_needs_mapping(void *ptr, size_t size) return 0; } +static dma_addr_t swiotlb_sg_to_bus(struct scatterlist *sg) +{ + return swiotlb_phys_to_bus(page_to_phys(sg_page(sg)) + sg->offset); +} + /* * Statically reserve bounce buffer space and initialize bounce buffer data * structures for the software IO TLB used to implement the DMA API. @@ -183,7 +189,7 @@ swiotlb_init_with_default_size(size_t default_size) for (i = 0; i < io_tlb_nslabs; i++) io_tlb_list[i] = IO_TLB_SEGSIZE - OFFSET(i, IO_TLB_SEGSIZE); io_tlb_index = 0; - io_tlb_orig_addr = alloc_bootmem(io_tlb_nslabs * sizeof(char *)); + io_tlb_orig_addr = alloc_bootmem(io_tlb_nslabs * sizeof(struct swiotlb_phys_addr)); /* * Get the overflow emergency buffer @@ -258,12 +264,12 @@ swiotlb_late_init_with_default_size(size_t default_size) io_tlb_list[i] = IO_TLB_SEGSIZE - OFFSET(i, IO_TLB_SEGSIZE); io_tlb_index = 0; - io_tlb_orig_addr = (unsigned char **)__get_free_pages(GFP_KERNEL, - get_order(io_tlb_nslabs * sizeof(char *))); + io_tlb_orig_addr = (struct swiotlb_phys_addr *)__get_free_pages(GFP_KERNEL, + get_order(io_tlb_nslabs * sizeof(struct swiotlb_phys_addr))); if (!io_tlb_orig_addr) goto cleanup3; - memset(io_tlb_orig_addr, 0, io_tlb_nslabs * sizeof(char *)); + memset(io_tlb_orig_addr, 0, io_tlb_nslabs * sizeof(struct swiotlb_phys_addr)); /* * Get the overflow emergency buffer @@ -312,20 +318,59 @@ static int is_swiotlb_buffer(char *addr) return addr >= io_tlb_start && addr < io_tlb_end; } -static void -__sync_single(char *buffer, char *dma_addr, size_t size, int dir) +static struct swiotlb_phys_addr swiotlb_bus_to_phys_addr(char *dma_addr) { - if (dir == DMA_TO_DEVICE) - memcpy(dma_addr, buffer, size); - else - memcpy(buffer, dma_addr, size); + int index = (dma_addr - io_tlb_start) >> IO_TLB_SHIFT; + struct swiotlb_phys_addr buffer = io_tlb_orig_addr[index]; + buffer.offset += (long)dma_addr & ((1 << IO_TLB_SHIFT) - 1); + buffer.page += buffer.offset >> PAGE_SHIFT; + buffer.offset &= PAGE_SIZE - 1; + return buffer; +} + +static void +__sync_single(struct swiotlb_phys_addr buffer, char *dma_addr, size_t size, int dir) +{ + if (PageHighMem(buffer.page)) { + size_t len, bytes; + char *dev, *host, *kmp; + + len = size; + while (len != 0) { + unsigned long flags; + + bytes = len; + if ((bytes + buffer.offset) > PAGE_SIZE) + bytes = PAGE_SIZE - buffer.offset; + local_irq_save(flags); /* protects KM_BOUNCE_READ */ + kmp = kmap_atomic(buffer.page, KM_BOUNCE_READ); + dev = dma_addr + size - len; + host = kmp + buffer.offset; + if (dir == DMA_FROM_DEVICE) + memcpy(host, dev, bytes); + else + memcpy(dev, host, bytes); + kunmap_atomic(kmp, KM_BOUNCE_READ); + local_irq_restore(flags); + len -= bytes; + buffer.page++; + buffer.offset = 0; + } + } else { + void *v = page_address(buffer.page) + buffer.offset; + + if (dir == DMA_TO_DEVICE) + memcpy(dma_addr, v, size); + else + memcpy(v, dma_addr, size); + } } /* * Allocates bounce buffer and returns its kernel virtual address. */ static void * -map_single(struct device *hwdev, char *buffer, size_t size, int dir) +map_single(struct device *hwdev, struct swiotlb_phys_addr buffer, size_t size, int dir) { unsigned long flags; char *dma_addr; @@ -335,6 +380,7 @@ map_single(struct device *hwdev, char *buffer, size_t size, int dir) unsigned long mask; unsigned long offset_slots; unsigned long max_slots; + struct swiotlb_phys_addr slot_buf; mask = dma_get_seg_boundary(hwdev); start_dma_addr = swiotlb_virt_to_bus(io_tlb_start) & mask; @@ -419,8 +465,13 @@ found: * This is needed when we sync the memory. Then we sync the buffer if * needed. */ - for (i = 0; i < nslots; i++) - io_tlb_orig_addr[index+i] = buffer + (i << IO_TLB_SHIFT); + slot_buf = buffer; + for (i = 0; i < nslots; i++) { + slot_buf.page += slot_buf.offset >> PAGE_SHIFT; + slot_buf.offset &= PAGE_SIZE - 1; + io_tlb_orig_addr[index+i] = slot_buf; + slot_buf.offset += 1 << IO_TLB_SHIFT; + } if (dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL) __sync_single(buffer, dma_addr, size, DMA_TO_DEVICE); @@ -436,12 +487,12 @@ unmap_single(struct device *hwdev, char *dma_addr, size_t size, int dir) unsigned long flags; int i, count, nslots = ALIGN(size, 1 << IO_TLB_SHIFT) >> IO_TLB_SHIFT; int index = (dma_addr - io_tlb_start) >> IO_TLB_SHIFT; - char *buffer = io_tlb_orig_addr[index]; + struct swiotlb_phys_addr buffer = swiotlb_bus_to_phys_addr(dma_addr); /* * First, sync the memory before unmapping the entry */ - if (buffer && ((dir == DMA_FROM_DEVICE) || (dir == DMA_BIDIRECTIONAL))) + if ((dir == DMA_FROM_DEVICE) || (dir == DMA_BIDIRECTIONAL)) /* * bounce... copy the data back into the original buffer * and * delete the bounce buffer. @@ -478,10 +529,7 @@ static void sync_single(struct device *hwdev, char *dma_addr, size_t size, int dir, int target) { - int index = (dma_addr - io_tlb_start) >> IO_TLB_SHIFT; - char *buffer = io_tlb_orig_addr[index]; - - buffer += ((unsigned long)dma_addr & ((1 << IO_TLB_SHIFT) - 1)); + struct swiotlb_phys_addr buffer = swiotlb_bus_to_phys_addr(dma_addr); switch (target) { case SYNC_FOR_CPU: @@ -529,7 +577,10 @@ swiotlb_alloc_coherent(struct device *hwdev, size_t size, * swiotlb_map_single(), which will grab memory from * the lowest available address range. */ - ret = map_single(hwdev, NULL, size, DMA_FROM_DEVICE); + struct swiotlb_phys_addr buffer; + buffer.page = virt_to_page(NULL); + buffer.offset = 0; + ret = map_single(hwdev, buffer, size, DMA_FROM_DEVICE); if (!ret) return NULL; } @@ -597,6 +648,7 @@ swiotlb_map_single_attrs(struct device *hwdev, void *ptr, size_t size, { dma_addr_t dev_addr = swiotlb_virt_to_bus(ptr); void *map; + struct swiotlb_phys_addr buffer; BUG_ON(dir == DMA_NONE); /* @@ -611,7 +663,9 @@ swiotlb_map_single_attrs(struct device *hwdev, void *ptr, size_t size, /* * Oh well, have to allocate and map a bounce buffer. */ - map = map_single(hwdev, ptr, size, dir); + buffer.page = virt_to_page(ptr); + buffer.offset = (unsigned long)ptr & ~PAGE_MASK; + map = map_single(hwdev, buffer, size, dir); if (!map) { swiotlb_full(hwdev, size, dir, 1); map = io_tlb_overflow_buffer; @@ -756,18 +810,20 @@ swiotlb_map_sg_attrs(struct device *hwdev, struct scatterlist *sgl, int nelems, int dir, struct dma_attrs *attrs) { struct scatterlist *sg; - void *addr; + struct swiotlb_phys_addr buffer; dma_addr_t dev_addr; int i; BUG_ON(dir == DMA_NONE); for_each_sg(sgl, sg, nelems, i) { - addr = SG_ENT_VIRT_ADDRESS(sg); - dev_addr = swiotlb_virt_to_bus(addr); + dev_addr = swiotlb_sg_to_bus(sg); if (range_needs_mapping(sg_virt(sg), sg->length) || address_needs_mapping(hwdev, dev_addr, sg->length)) { - void *map = map_single(hwdev, addr, sg->length, dir); + void *map; + buffer.page = sg_page(sg); + buffer.offset = sg->offset; + map = map_single(hwdev, buffer, sg->length, dir); if (!map) { /* Don't panic here, we expect map_sg users to do proper error handling. */ @@ -807,11 +863,11 @@ swiotlb_unmap_sg_attrs(struct device *hwdev, struct scatterlist *sgl, BUG_ON(dir == DMA_NONE); for_each_sg(sgl, sg, nelems, i) { - if (sg->dma_address != SG_ENT_PHYS_ADDRESS(sg)) + if (sg->dma_address != swiotlb_sg_to_bus(sg)) unmap_single(hwdev, swiotlb_bus_to_virt(sg->dma_address), sg->dma_length, dir); else if (dir == DMA_FROM_DEVICE) - dma_mark_clean(SG_ENT_VIRT_ADDRESS(sg), sg->dma_length); + dma_mark_clean(swiotlb_bus_to_virt(sg->dma_address), sg->dma_length); } } EXPORT_SYMBOL(swiotlb_unmap_sg_attrs); @@ -840,11 +896,11 @@ swiotlb_sync_sg(struct device *hwdev, struct scatterlist *sgl, BUG_ON(dir == DMA_NONE); for_each_sg(sgl, sg, nelems, i) { - if (sg->dma_address != SG_ENT_PHYS_ADDRESS(sg)) + if (sg->dma_address != swiotlb_sg_to_bus(sg)) sync_single(hwdev, swiotlb_bus_to_virt(sg->dma_address), sg->dma_length, dir, target); else if (dir == DMA_FROM_DEVICE) - dma_mark_clean(SG_ENT_VIRT_ADDRESS(sg), sg->dma_length); + dma_mark_clean(swiotlb_bus_to_virt(sg->dma_address), sg->dma_length); } } -- cgit v1.1 From 2e5b2b86b65fe36bb8401e5608eb0b7603aa1cab Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Tue, 16 Dec 2008 12:17:34 -0800 Subject: swiotlb: consolidate swiotlb info message printing Impact: clean up swiotlb printks Remove duplicated swiotlb info printing, and make it more detailed. Signed-off-by: Ian Campbell Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Ingo Molnar --- lib/swiotlb.c | 33 ++++++++++++++++++++++++++++----- 1 file changed, 28 insertions(+), 5 deletions(-) (limited to 'lib') diff --git a/lib/swiotlb.c b/lib/swiotlb.c index 1661af5..fa2dc4e 100644 --- a/lib/swiotlb.c +++ b/lib/swiotlb.c @@ -156,6 +156,32 @@ static dma_addr_t swiotlb_sg_to_bus(struct scatterlist *sg) return swiotlb_phys_to_bus(page_to_phys(sg_page(sg)) + sg->offset); } +static void swiotlb_print_info(unsigned long bytes) +{ + phys_addr_t pstart, pend; + dma_addr_t bstart, bend; + + pstart = virt_to_phys(io_tlb_start); + pend = virt_to_phys(io_tlb_end); + + bstart = swiotlb_phys_to_bus(pstart); + bend = swiotlb_phys_to_bus(pend); + + printk(KERN_INFO "Placing %luMB software IO TLB between %p - %p\n", + bytes >> 20, io_tlb_start, io_tlb_end); + if (pstart != bstart || pend != bend) + printk(KERN_INFO "software IO TLB at phys %#llx - %#llx" + " bus %#llx - %#llx\n", + (unsigned long long)pstart, + (unsigned long long)pend, + (unsigned long long)bstart, + (unsigned long long)bend); + else + printk(KERN_INFO "software IO TLB at phys %#llx - %#llx\n", + (unsigned long long)pstart, + (unsigned long long)pend); +} + /* * Statically reserve bounce buffer space and initialize bounce buffer data * structures for the software IO TLB used to implement the DMA API. @@ -198,8 +224,7 @@ swiotlb_init_with_default_size(size_t default_size) if (!io_tlb_overflow_buffer) panic("Cannot allocate SWIOTLB overflow buffer!\n"); - printk(KERN_INFO "Placing software IO TLB between 0x%lx - 0x%lx\n", - swiotlb_virt_to_bus(io_tlb_start), swiotlb_virt_to_bus(io_tlb_end)); + swiotlb_print_info(bytes); } void __init @@ -279,9 +304,7 @@ swiotlb_late_init_with_default_size(size_t default_size) if (!io_tlb_overflow_buffer) goto cleanup4; - printk(KERN_INFO "Placing %luMB software IO TLB between 0x%lx - " - "0x%lx\n", bytes >> 20, - swiotlb_virt_to_bus(io_tlb_start), swiotlb_virt_to_bus(io_tlb_end)); + swiotlb_print_info(bytes); return 0; -- cgit v1.1 From 64db4cfff99c04cd5f550357edcc8780f96b54a2 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Thu, 18 Dec 2008 21:55:32 +0100 Subject: "Tree RCU": scalable classic RCU implementation This patch fixes a long-standing performance bug in classic RCU that results in massive internal-to-RCU lock contention on systems with more than a few hundred CPUs. Although this patch creates a separate flavor of RCU for ease of review and patch maintenance, it is intended to replace classic RCU. This patch still handles stress better than does mainline, so I am still calling it ready for inclusion. This patch is against the -tip tree. Nevertheless, experience on an actual 1000+ CPU machine would still be most welcome. Most of the changes noted below were found while creating an rcutiny (which should permit ejecting the current rcuclassic) and while doing detailed line-by-line documentation. Updates from v9 (http://lkml.org/lkml/2008/12/2/334): o Fixes from remainder of line-by-line code walkthrough, including comment spelling, initialization, undesirable narrowing due to type conversion, removing redundant memory barriers, removing redundant local-variable initialization, and removing redundant local variables. I do not believe that any of these fixes address the CPU-hotplug issues that Andi Kleen was seeing, but please do give it a whirl in case the machine is smarter than I am. A writeup from the walkthrough may be found at the following URL, in case you are suffering from terminal insomnia or masochism: http://www.kernel.org/pub/linux/kernel/people/paulmck/tmp/rcutree-walkthrough.2008.12.16a.pdf o Made rcutree tracing use seq_file, as suggested some time ago by Lai Jiangshan. o Added a .csv variant of the rcudata debugfs trace file, to allow people having thousands of CPUs to drop the data into a spreadsheet. Tested with oocalc and gnumeric. Updated documentation to suit. Updates from v8 (http://lkml.org/lkml/2008/11/15/139): o Fix a theoretical race between grace-period initialization and force_quiescent_state() that could occur if more than three jiffies were required to carry out the grace-period initialization. Which it might, if you had enough CPUs. o Apply Ingo's printk-standardization patch. o Substitute local variables for repeated accesses to global variables. o Fix comment misspellings and redundant (but harmless) increments of ->n_rcu_pending (this latter after having explicitly added it). o Apply checkpatch fixes. Updates from v7 (http://lkml.org/lkml/2008/10/10/291): o Fixed a number of problems noted by Gautham Shenoy, including the cpu-stall-detection bug that he was having difficulty convincing me was real. ;-) o Changed cpu-stall detection to wait for ten seconds rather than three in order to reduce false positive, as suggested by Ingo Molnar. o Produced a design document (http://lwn.net/Articles/305782/). The act of writing this document uncovered a number of both theoretical and "here and now" bugs as noted below. o Fix dynticks_nesting accounting confusion, simplify WARN_ON() condition, fix kerneldoc comments, and add memory barriers in dynticks interface functions. o Add more data to tracing. o Remove unused "rcu_barrier" field from rcu_data structure. o Count calls to rcu_pending() from scheduling-clock interrupt to use as a surrogate timebase should jiffies stop counting. o Fix a theoretical race between force_quiescent_state() and grace-period initialization. Yes, initialization does have to go on for some jiffies for this race to occur, but given enough CPUs... Updates from v6 (http://lkml.org/lkml/2008/9/23/448): o Fix a number of checkpatch.pl complaints. o Apply review comments from Ingo Molnar and Lai Jiangshan on the stall-detection code. o Fix several bugs in !CONFIG_SMP builds. o Fix a misspelled config-parameter name so that RCU now announces at boot time if stall detection is configured. o Run tests on numerous combinations of configurations parameters, which after the fixes above, now build and run correctly. Updates from v5 (http://lkml.org/lkml/2008/9/15/92, bad subject line): o Fix a compiler error in the !CONFIG_FANOUT_EXACT case (blew a changeset some time ago, and finally got around to retesting this option). o Fix some tracing bugs in rcupreempt that caused incorrect totals to be printed. o I now test with a more brutal random-selection online/offline script (attached). Probably more brutal than it needs to be on the people reading it as well, but so it goes. o A number of optimizations and usability improvements: o Make rcu_pending() ignore the grace-period timeout when there is no grace period in progress. o Make force_quiescent_state() avoid going for a global lock in the case where there is no grace period in progress. o Rearrange struct fields to improve struct layout. o Make call_rcu() initiate a grace period if RCU was idle, rather than waiting for the next scheduling clock interrupt. o Invoke rcu_irq_enter() and rcu_irq_exit() only when idle, as suggested by Andi Kleen. I still don't completely trust this change, and might back it out. o Make CONFIG_RCU_TRACE be the single config variable manipulated for all forms of RCU, instead of the prior confusion. o Document tracing files and formats for both rcupreempt and rcutree. Updates from v4 for those missing v5 given its bad subject line: o Separated dynticks interface so that NMIs and irqs call separate functions, greatly simplifying it. In particular, this code no longer requires a proof of correctness. ;-) o Separated dynticks state out into its own per-CPU structure, avoiding the duplicated accounting. o The case where a dynticks-idle CPU runs an irq handler that invokes call_rcu() is now correctly handled, forcing that CPU out of dynticks-idle mode. o Review comments have been applied (thank you all!!!). For but one example, fixed the dynticks-ordering issue that Manfred pointed out, saving me much debugging. ;-) o Adjusted rcuclassic and rcupreempt to handle dynticks changes. Attached is an updated patch to Classic RCU that applies a hierarchy, greatly reducing the contention on the top-level lock for large machines. This passes 10-hour concurrent rcutorture and online-offline testing on 128-CPU ppc64 without dynticks enabled, and exposes some timekeeping bugs in presence of dynticks (exciting working on a system where "sleep 1" hangs until interrupted...), which were fixed in the 2.6.27 kernel. It is getting more reliable than mainline by some measures, so the next version will be against -tip for inclusion. See also Manfred Spraul's recent patches (or his earlier work from 2004 at http://marc.info/?l=linux-kernel&m=108546384711797&w=2). We will converge onto a common patch in the fullness of time, but are currently exploring different regions of the design space. That said, I have already gratefully stolen quite a few of Manfred's ideas. This patch provides CONFIG_RCU_FANOUT, which controls the bushiness of the RCU hierarchy. Defaults to 32 on 32-bit machines and 64 on 64-bit machines. If CONFIG_NR_CPUS is less than CONFIG_RCU_FANOUT, there is no hierarchy. By default, the RCU initialization code will adjust CONFIG_RCU_FANOUT to balance the hierarchy, so strongly NUMA architectures may choose to set CONFIG_RCU_FANOUT_EXACT to disable this balancing, allowing the hierarchy to be exactly aligned to the underlying hardware. Up to two levels of hierarchy are permitted (in addition to the root node), allowing up to 16,384 CPUs on 32-bit systems and up to 262,144 CPUs on 64-bit systems. I just know that I am going to regret saying this, but this seems more than sufficient for the foreseeable future. (Some architectures might wish to set CONFIG_RCU_FANOUT=4, which would limit such architectures to 64 CPUs. If this becomes a real problem, additional levels can be added, but I doubt that it will make a significant difference on real hardware.) In the common case, a given CPU will manipulate its private rcu_data structure and the rcu_node structure that it shares with its immediate neighbors. This can reduce both lock and memory contention by multiple orders of magnitude, which should eliminate the need for the strange manipulations that are reported to be required when running Linux on very large systems. Some shortcomings: o More bugs will probably surface as a result of an ongoing line-by-line code inspection. Patches will be provided as required. o There are probably hangs, rcutorture failures, &c. Seems quite stable on a 128-CPU machine, but that is kind of small compared to 4096 CPUs. However, seems to do better than mainline. Patches will be provided as required. o The memory footprint of this version is several KB larger than rcuclassic. A separate UP-only rcutiny patch will be provided, which will reduce the memory footprint significantly, even compared to the old rcuclassic. One such patch passes light testing, and has a memory footprint smaller even than rcuclassic. Initial reaction from various embedded guys was "it is not worth it", so am putting it aside. Credits: o Manfred Spraul for ideas, review comments, and bugs spotted, as well as some good friendly competition. ;-) o Josh Triplett, Ingo Molnar, Peter Zijlstra, Mathieu Desnoyers, Lai Jiangshan, Andi Kleen, Andy Whitcroft, and Andrew Morton for reviews and comments. o Thomas Gleixner for much-needed help with some timer issues (see patches below). o Jon M. Tollefson, Tim Pepper, Andrew Theurer, Jose R. Santos, Andy Whitcroft, Darrick Wong, Nishanth Aravamudan, Anton Blanchard, Dave Kleikamp, and Nathan Lynch for keeping machines alive despite my heavy abuse^Wtesting. Signed-off-by: Paul E. McKenney Signed-off-by: Ingo Molnar --- lib/Kconfig.debug | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'lib') diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index b0f239e..465d822 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -619,6 +619,19 @@ config RCU_CPU_STALL_DETECTOR Say N if you are unsure. +config RCU_CPU_STALL_DETECTOR + bool "Check for stalled CPUs delaying RCU grace periods" + depends on CLASSIC_RCU || TREE_RCU + default n + help + This option causes RCU to printk information on which + CPUs are delaying the current grace period, but only when + the grace period extends for excessive time periods. + + Say Y if you want RCU to perform such checks. + + Say N if you are unsure. + config KPROBES_SANITY_TEST bool "Kprobes sanity tests" depends on DEBUG_KERNEL -- cgit v1.1 From 773ff60e841461cb1f9374a713ffcda029b8c317 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Tue, 23 Dec 2008 19:37:01 +0900 Subject: SLUB: failslab support Currently fault-injection capability for SLAB allocator is only available to SLAB. This patch makes it available to SLUB, too. [penberg@cs.helsinki.fi: unify slab and slub implementations] Cc: Christoph Lameter Cc: Matt Mackall Signed-off-by: Akinobu Mita Signed-off-by: Pekka Enberg --- lib/Kconfig.debug | 1 + 1 file changed, 1 insertion(+) (limited to 'lib') diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index b0f239e..af65ae7 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -699,6 +699,7 @@ config FAULT_INJECTION config FAILSLAB bool "Fault-injection capability for kmalloc" depends on FAULT_INJECTION + depends on SLAB || SLUB help Provide fault-injection capability for kmalloc. -- cgit v1.1