From c697eecebc6cfc0b393afea3c4ff1a5041526ad1 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 8 Jan 2008 00:04:17 +0100 Subject: Suspend: Introduce begin() and end() callbacks MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit On ACPI systems the target state set by acpi_pm_set_target() is reset by acpi_pm_finish(), but that need not be called if the suspend fails.  All platforms that use the .set_target() global suspend callback are affected by analogous issues. For this reason, we need an additional global suspend callback that will reset the target state regardless of whether or not the suspend is successful.  Also, it is reasonable to rename the .set_target() callback, since it will be used for a different purpose on ACPI systems (due to ACPI 1.0x code ordering requirements). Introduce the global suspend callback .end() to be executed at the end of the suspend sequence and rename the .set_target() global suspend callback to .begin(). Signed-off-by: Rafael J. Wysocki Signed-off-by: Len Brown --- kernel/power/main.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'kernel/power') diff --git a/kernel/power/main.c b/kernel/power/main.c index 050a607..d9bba45 100644 --- a/kernel/power/main.c +++ b/kernel/power/main.c @@ -258,10 +258,10 @@ int suspend_devices_and_enter(suspend_state_t state) if (!suspend_ops) return -ENOSYS; - if (suspend_ops->set_target) { - error = suspend_ops->set_target(state); + if (suspend_ops->begin) { + error = suspend_ops->begin(state); if (error) - return error; + goto Close; } suspend_console(); error = device_suspend(PMSG_SUSPEND); @@ -294,6 +294,9 @@ int suspend_devices_and_enter(suspend_state_t state) device_resume(); Resume_console: resume_console(); + Close: + if (suspend_ops->end) + suspend_ops->end(); return error; } -- cgit v1.1