From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- kernel/audit.c | 839 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 839 insertions(+) create mode 100644 kernel/audit.c (limited to 'kernel/audit.c') diff --git a/kernel/audit.c b/kernel/audit.c new file mode 100644 index 0000000..0f84dd7 --- /dev/null +++ b/kernel/audit.c @@ -0,0 +1,839 @@ +/* audit.c -- Auditing support -*- linux-c -*- + * Gateway between the kernel (e.g., selinux) and the user-space audit daemon. + * System-call specific features have moved to auditsc.c + * + * Copyright 2003-2004 Red Hat Inc., Durham, North Carolina. + * All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Written by Rickard E. (Rik) Faith + * + * Goals: 1) Integrate fully with SELinux. + * 2) Minimal run-time overhead: + * a) Minimal when syscall auditing is disabled (audit_enable=0). + * b) Small when syscall auditing is enabled and no audit record + * is generated (defer as much work as possible to record + * generation time): + * i) context is allocated, + * ii) names from getname are stored without a copy, and + * iii) inode information stored from path_lookup. + * 3) Ability to disable syscall auditing at boot time (audit=0). + * 4) Usable by other parts of the kernel (if audit_log* is called, + * then a syscall record will be generated automatically for the + * current syscall). + * 5) Netlink interface to user-space. + * 6) Support low-overhead kernel-based filtering to minimize the + * information that must be passed to user-space. + * + * Example user-space utilities: http://people.redhat.com/faith/audit/ + */ + +#include +#include +#include +#include +#include + +#include + +#include +#include +#include + +/* No auditing will take place until audit_initialized != 0. + * (Initialization happens after skb_init is called.) */ +static int audit_initialized; + +/* No syscall auditing will take place unless audit_enabled != 0. */ +int audit_enabled; + +/* Default state when kernel boots without any parameters. */ +static int audit_default; + +/* If auditing cannot proceed, audit_failure selects what happens. */ +static int audit_failure = AUDIT_FAIL_PRINTK; + +/* If audit records are to be written to the netlink socket, audit_pid + * contains the (non-zero) pid. */ +static int audit_pid; + +/* If audit_limit is non-zero, limit the rate of sending audit records + * to that number per second. This prevents DoS attacks, but results in + * audit records being dropped. */ +static int audit_rate_limit; + +/* Number of outstanding audit_buffers allowed. */ +static int audit_backlog_limit = 64; +static atomic_t audit_backlog = ATOMIC_INIT(0); + +/* Records can be lost in several ways: + 0) [suppressed in audit_alloc] + 1) out of memory in audit_log_start [kmalloc of struct audit_buffer] + 2) out of memory in audit_log_move [alloc_skb] + 3) suppressed due to audit_rate_limit + 4) suppressed due to audit_backlog_limit +*/ +static atomic_t audit_lost = ATOMIC_INIT(0); + +/* The netlink socket. */ +static struct sock *audit_sock; + +/* There are two lists of audit buffers. The txlist contains audit + * buffers that cannot be sent immediately to the netlink device because + * we are in an irq context (these are sent later in a tasklet). + * + * The second list is a list of pre-allocated audit buffers (if more + * than AUDIT_MAXFREE are in use, the audit buffer is freed instead of + * being placed on the freelist). */ +static DEFINE_SPINLOCK(audit_txlist_lock); +static DEFINE_SPINLOCK(audit_freelist_lock); +static int audit_freelist_count = 0; +static LIST_HEAD(audit_txlist); +static LIST_HEAD(audit_freelist); + +/* There are three lists of rules -- one to search at task creation + * time, one to search at syscall entry time, and another to search at + * syscall exit time. */ +static LIST_HEAD(audit_tsklist); +static LIST_HEAD(audit_entlist); +static LIST_HEAD(audit_extlist); + +/* The netlink socket is only to be read by 1 CPU, which lets us assume + * that list additions and deletions never happen simultaneiously in + * auditsc.c */ +static DECLARE_MUTEX(audit_netlink_sem); + +/* AUDIT_BUFSIZ is the size of the temporary buffer used for formatting + * audit records. Since printk uses a 1024 byte buffer, this buffer + * should be at least that large. */ +#define AUDIT_BUFSIZ 1024 + +/* AUDIT_MAXFREE is the number of empty audit_buffers we keep on the + * audit_freelist. Doing so eliminates many kmalloc/kfree calls. */ +#define AUDIT_MAXFREE (2*NR_CPUS) + +/* The audit_buffer is used when formatting an audit record. The caller + * locks briefly to get the record off the freelist or to allocate the + * buffer, and locks briefly to send the buffer to the netlink layer or + * to place it on a transmit queue. Multiple audit_buffers can be in + * use simultaneously. */ +struct audit_buffer { + struct list_head list; + struct sk_buff_head sklist; /* formatted skbs ready to send */ + struct audit_context *ctx; /* NULL or associated context */ + int len; /* used area of tmp */ + char tmp[AUDIT_BUFSIZ]; + + /* Pointer to header and contents */ + struct nlmsghdr *nlh; + int total; + int type; + int pid; + int count; /* Times requeued */ +}; + +void audit_set_type(struct audit_buffer *ab, int type) +{ + ab->type = type; +} + +struct audit_entry { + struct list_head list; + struct audit_rule rule; +}; + +static void audit_log_end_irq(struct audit_buffer *ab); +static void audit_log_end_fast(struct audit_buffer *ab); + +static void audit_panic(const char *message) +{ + switch (audit_failure) + { + case AUDIT_FAIL_SILENT: + break; + case AUDIT_FAIL_PRINTK: + printk(KERN_ERR "audit: %s\n", message); + break; + case AUDIT_FAIL_PANIC: + panic("audit: %s\n", message); + break; + } +} + +static inline int audit_rate_check(void) +{ + static unsigned long last_check = 0; + static int messages = 0; + static DEFINE_SPINLOCK(lock); + unsigned long flags; + unsigned long now; + unsigned long elapsed; + int retval = 0; + + if (!audit_rate_limit) return 1; + + spin_lock_irqsave(&lock, flags); + if (++messages < audit_rate_limit) { + retval = 1; + } else { + now = jiffies; + elapsed = now - last_check; + if (elapsed > HZ) { + last_check = now; + messages = 0; + retval = 1; + } + } + spin_unlock_irqrestore(&lock, flags); + + return retval; +} + +/* Emit at least 1 message per second, even if audit_rate_check is + * throttling. */ +void audit_log_lost(const char *message) +{ + static unsigned long last_msg = 0; + static DEFINE_SPINLOCK(lock); + unsigned long flags; + unsigned long now; + int print; + + atomic_inc(&audit_lost); + + print = (audit_failure == AUDIT_FAIL_PANIC || !audit_rate_limit); + + if (!print) { + spin_lock_irqsave(&lock, flags); + now = jiffies; + if (now - last_msg > HZ) { + print = 1; + last_msg = now; + } + spin_unlock_irqrestore(&lock, flags); + } + + if (print) { + printk(KERN_WARNING + "audit: audit_lost=%d audit_backlog=%d" + " audit_rate_limit=%d audit_backlog_limit=%d\n", + atomic_read(&audit_lost), + atomic_read(&audit_backlog), + audit_rate_limit, + audit_backlog_limit); + audit_panic(message); + } + +} + +static int audit_set_rate_limit(int limit) +{ + int old = audit_rate_limit; + audit_rate_limit = limit; + audit_log(current->audit_context, "audit_rate_limit=%d old=%d", + audit_rate_limit, old); + return old; +} + +static int audit_set_backlog_limit(int limit) +{ + int old = audit_backlog_limit; + audit_backlog_limit = limit; + audit_log(current->audit_context, "audit_backlog_limit=%d old=%d", + audit_backlog_limit, old); + return old; +} + +static int audit_set_enabled(int state) +{ + int old = audit_enabled; + if (state != 0 && state != 1) + return -EINVAL; + audit_enabled = state; + audit_log(current->audit_context, "audit_enabled=%d old=%d", + audit_enabled, old); + return old; +} + +static int audit_set_failure(int state) +{ + int old = audit_failure; + if (state != AUDIT_FAIL_SILENT + && state != AUDIT_FAIL_PRINTK + && state != AUDIT_FAIL_PANIC) + return -EINVAL; + audit_failure = state; + audit_log(current->audit_context, "audit_failure=%d old=%d", + audit_failure, old); + return old; +} + +#ifdef CONFIG_NET +void audit_send_reply(int pid, int seq, int type, int done, int multi, + void *payload, int size) +{ + struct sk_buff *skb; + struct nlmsghdr *nlh; + int len = NLMSG_SPACE(size); + void *data; + int flags = multi ? NLM_F_MULTI : 0; + int t = done ? NLMSG_DONE : type; + + skb = alloc_skb(len, GFP_KERNEL); + if (!skb) + goto nlmsg_failure; + + nlh = NLMSG_PUT(skb, pid, seq, t, len - sizeof(*nlh)); + nlh->nlmsg_flags = flags; + data = NLMSG_DATA(nlh); + memcpy(data, payload, size); + netlink_unicast(audit_sock, skb, pid, MSG_DONTWAIT); + return; + +nlmsg_failure: /* Used by NLMSG_PUT */ + if (skb) + kfree_skb(skb); +} + +/* + * Check for appropriate CAP_AUDIT_ capabilities on incoming audit + * control messages. + */ +static int audit_netlink_ok(kernel_cap_t eff_cap, u16 msg_type) +{ + int err = 0; + + switch (msg_type) { + case AUDIT_GET: + case AUDIT_LIST: + case AUDIT_SET: + case AUDIT_ADD: + case AUDIT_DEL: + if (!cap_raised(eff_cap, CAP_AUDIT_CONTROL)) + err = -EPERM; + break; + case AUDIT_USER: + if (!cap_raised(eff_cap, CAP_AUDIT_WRITE)) + err = -EPERM; + break; + default: /* bad msg */ + err = -EINVAL; + } + + return err; +} + +static int audit_receive_msg(struct sk_buff *skb, struct nlmsghdr *nlh) +{ + u32 uid, pid, seq; + void *data; + struct audit_status *status_get, status_set; + int err; + struct audit_buffer *ab; + u16 msg_type = nlh->nlmsg_type; + + err = audit_netlink_ok(NETLINK_CB(skb).eff_cap, msg_type); + if (err) + return err; + + pid = NETLINK_CREDS(skb)->pid; + uid = NETLINK_CREDS(skb)->uid; + seq = nlh->nlmsg_seq; + data = NLMSG_DATA(nlh); + + switch (msg_type) { + case AUDIT_GET: + status_set.enabled = audit_enabled; + status_set.failure = audit_failure; + status_set.pid = audit_pid; + status_set.rate_limit = audit_rate_limit; + status_set.backlog_limit = audit_backlog_limit; + status_set.lost = atomic_read(&audit_lost); + status_set.backlog = atomic_read(&audit_backlog); + audit_send_reply(NETLINK_CB(skb).pid, seq, AUDIT_GET, 0, 0, + &status_set, sizeof(status_set)); + break; + case AUDIT_SET: + if (nlh->nlmsg_len < sizeof(struct audit_status)) + return -EINVAL; + status_get = (struct audit_status *)data; + if (status_get->mask & AUDIT_STATUS_ENABLED) { + err = audit_set_enabled(status_get->enabled); + if (err < 0) return err; + } + if (status_get->mask & AUDIT_STATUS_FAILURE) { + err = audit_set_failure(status_get->failure); + if (err < 0) return err; + } + if (status_get->mask & AUDIT_STATUS_PID) { + int old = audit_pid; + audit_pid = status_get->pid; + audit_log(current->audit_context, + "audit_pid=%d old=%d", audit_pid, old); + } + if (status_get->mask & AUDIT_STATUS_RATE_LIMIT) + audit_set_rate_limit(status_get->rate_limit); + if (status_get->mask & AUDIT_STATUS_BACKLOG_LIMIT) + audit_set_backlog_limit(status_get->backlog_limit); + break; + case AUDIT_USER: + ab = audit_log_start(NULL); + if (!ab) + break; /* audit_panic has been called */ + audit_log_format(ab, + "user pid=%d uid=%d length=%d msg='%.1024s'", + pid, uid, + (int)(nlh->nlmsg_len + - ((char *)data - (char *)nlh)), + (char *)data); + ab->type = AUDIT_USER; + ab->pid = pid; + audit_log_end(ab); + break; + case AUDIT_ADD: + case AUDIT_DEL: + if (nlh->nlmsg_len < sizeof(struct audit_rule)) + return -EINVAL; + /* fallthrough */ + case AUDIT_LIST: +#ifdef CONFIG_AUDITSYSCALL + err = audit_receive_filter(nlh->nlmsg_type, NETLINK_CB(skb).pid, + uid, seq, data); +#else + err = -EOPNOTSUPP; +#endif + break; + default: + err = -EINVAL; + break; + } + + return err < 0 ? err : 0; +} + +/* Get message from skb (based on rtnetlink_rcv_skb). Each message is + * processed by audit_receive_msg. Malformed skbs with wrong length are + * discarded silently. */ +static int audit_receive_skb(struct sk_buff *skb) +{ + int err; + struct nlmsghdr *nlh; + u32 rlen; + + while (skb->len >= NLMSG_SPACE(0)) { + nlh = (struct nlmsghdr *)skb->data; + if (nlh->nlmsg_len < sizeof(*nlh) || skb->len < nlh->nlmsg_len) + return 0; + rlen = NLMSG_ALIGN(nlh->nlmsg_len); + if (rlen > skb->len) + rlen = skb->len; + if ((err = audit_receive_msg(skb, nlh))) { + netlink_ack(skb, nlh, err); + } else if (nlh->nlmsg_flags & NLM_F_ACK) + netlink_ack(skb, nlh, 0); + skb_pull(skb, rlen); + } + return 0; +} + +/* Receive messages from netlink socket. */ +static void audit_receive(struct sock *sk, int length) +{ + struct sk_buff *skb; + + if (down_trylock(&audit_netlink_sem)) + return; + + /* FIXME: this must not cause starvation */ + while ((skb = skb_dequeue(&sk->sk_receive_queue))) { + if (audit_receive_skb(skb) && skb->len) + skb_queue_head(&sk->sk_receive_queue, skb); + else + kfree_skb(skb); + } + up(&audit_netlink_sem); +} + +/* Move data from tmp buffer into an skb. This is an extra copy, and + * that is unfortunate. However, the copy will only occur when a record + * is being written to user space, which is already a high-overhead + * operation. (Elimination of the copy is possible, for example, by + * writing directly into a pre-allocated skb, at the cost of wasting + * memory. */ +static void audit_log_move(struct audit_buffer *ab) +{ + struct sk_buff *skb; + char *start; + int extra = ab->nlh ? 0 : NLMSG_SPACE(0); + + /* possible resubmission */ + if (ab->len == 0) + return; + + skb = skb_peek(&ab->sklist); + if (!skb || skb_tailroom(skb) <= ab->len + extra) { + skb = alloc_skb(2 * ab->len + extra, GFP_ATOMIC); + if (!skb) { + ab->len = 0; /* Lose information in ab->tmp */ + audit_log_lost("out of memory in audit_log_move"); + return; + } + __skb_queue_tail(&ab->sklist, skb); + if (!ab->nlh) + ab->nlh = (struct nlmsghdr *)skb_put(skb, + NLMSG_SPACE(0)); + } + start = skb_put(skb, ab->len); + memcpy(start, ab->tmp, ab->len); + ab->len = 0; +} + +/* Iterate over the skbuff in the audit_buffer, sending their contents + * to user space. */ +static inline int audit_log_drain(struct audit_buffer *ab) +{ + struct sk_buff *skb; + + while ((skb = skb_dequeue(&ab->sklist))) { + int retval = 0; + + if (audit_pid) { + if (ab->nlh) { + ab->nlh->nlmsg_len = ab->total; + ab->nlh->nlmsg_type = ab->type; + ab->nlh->nlmsg_flags = 0; + ab->nlh->nlmsg_seq = 0; + ab->nlh->nlmsg_pid = ab->pid; + } + skb_get(skb); /* because netlink_* frees */ + retval = netlink_unicast(audit_sock, skb, audit_pid, + MSG_DONTWAIT); + } + if (retval == -EAGAIN && ab->count < 5) { + ++ab->count; + skb_queue_tail(&ab->sklist, skb); + audit_log_end_irq(ab); + return 1; + } + if (retval < 0) { + if (retval == -ECONNREFUSED) { + printk(KERN_ERR + "audit: *NO* daemon at audit_pid=%d\n", + audit_pid); + audit_pid = 0; + } else + audit_log_lost("netlink socket too busy"); + } + if (!audit_pid) { /* No daemon */ + int offset = ab->nlh ? NLMSG_SPACE(0) : 0; + int len = skb->len - offset; + printk(KERN_ERR "%*.*s\n", + len, len, skb->data + offset); + } + kfree_skb(skb); + ab->nlh = NULL; + } + return 0; +} + +/* Initialize audit support at boot time. */ +static int __init audit_init(void) +{ + printk(KERN_INFO "audit: initializing netlink socket (%s)\n", + audit_default ? "enabled" : "disabled"); + audit_sock = netlink_kernel_create(NETLINK_AUDIT, audit_receive); + if (!audit_sock) + audit_panic("cannot initialize netlink socket"); + + audit_initialized = 1; + audit_enabled = audit_default; + audit_log(NULL, "initialized"); + return 0; +} + +#else +/* Without CONFIG_NET, we have no skbuffs. For now, print what we have + * in the buffer. */ +static void audit_log_move(struct audit_buffer *ab) +{ + printk(KERN_ERR "%*.*s\n", ab->len, ab->len, ab->tmp); + ab->len = 0; +} + +static inline int audit_log_drain(struct audit_buffer *ab) +{ + return 0; +} + +/* Initialize audit support at boot time. */ +int __init audit_init(void) +{ + printk(KERN_INFO "audit: initializing WITHOUT netlink support\n"); + audit_sock = NULL; + audit_pid = 0; + + audit_initialized = 1; + audit_enabled = audit_default; + audit_log(NULL, "initialized"); + return 0; +} +#endif + +__initcall(audit_init); + +/* Process kernel command-line parameter at boot time. audit=0 or audit=1. */ +static int __init audit_enable(char *str) +{ + audit_default = !!simple_strtol(str, NULL, 0); + printk(KERN_INFO "audit: %s%s\n", + audit_default ? "enabled" : "disabled", + audit_initialized ? "" : " (after initialization)"); + if (audit_initialized) + audit_enabled = audit_default; + return 0; +} + +__setup("audit=", audit_enable); + + +/* Obtain an audit buffer. This routine does locking to obtain the + * audit buffer, but then no locking is required for calls to + * audit_log_*format. If the tsk is a task that is currently in a + * syscall, then the syscall is marked as auditable and an audit record + * will be written at syscall exit. If there is no associated task, tsk + * should be NULL. */ +struct audit_buffer *audit_log_start(struct audit_context *ctx) +{ + struct audit_buffer *ab = NULL; + unsigned long flags; + struct timespec t; + int serial = 0; + + if (!audit_initialized) + return NULL; + + if (audit_backlog_limit + && atomic_read(&audit_backlog) > audit_backlog_limit) { + if (audit_rate_check()) + printk(KERN_WARNING + "audit: audit_backlog=%d > " + "audit_backlog_limit=%d\n", + atomic_read(&audit_backlog), + audit_backlog_limit); + audit_log_lost("backlog limit exceeded"); + return NULL; + } + + spin_lock_irqsave(&audit_freelist_lock, flags); + if (!list_empty(&audit_freelist)) { + ab = list_entry(audit_freelist.next, + struct audit_buffer, list); + list_del(&ab->list); + --audit_freelist_count; + } + spin_unlock_irqrestore(&audit_freelist_lock, flags); + + if (!ab) + ab = kmalloc(sizeof(*ab), GFP_ATOMIC); + if (!ab) { + audit_log_lost("out of memory in audit_log_start"); + return NULL; + } + + atomic_inc(&audit_backlog); + skb_queue_head_init(&ab->sklist); + + ab->ctx = ctx; + ab->len = 0; + ab->nlh = NULL; + ab->total = 0; + ab->type = AUDIT_KERNEL; + ab->pid = 0; + ab->count = 0; + +#ifdef CONFIG_AUDITSYSCALL + if (ab->ctx) + audit_get_stamp(ab->ctx, &t, &serial); + else +#endif + t = CURRENT_TIME; + + audit_log_format(ab, "audit(%lu.%03lu:%u): ", + t.tv_sec, t.tv_nsec/1000000, serial); + return ab; +} + + +/* Format an audit message into the audit buffer. If there isn't enough + * room in the audit buffer, more room will be allocated and vsnprint + * will be called a second time. Currently, we assume that a printk + * can't format message larger than 1024 bytes, so we don't either. */ +static void audit_log_vformat(struct audit_buffer *ab, const char *fmt, + va_list args) +{ + int len, avail; + + if (!ab) + return; + + avail = sizeof(ab->tmp) - ab->len; + if (avail <= 0) { + audit_log_move(ab); + avail = sizeof(ab->tmp) - ab->len; + } + len = vsnprintf(ab->tmp + ab->len, avail, fmt, args); + if (len >= avail) { + /* The printk buffer is 1024 bytes long, so if we get + * here and AUDIT_BUFSIZ is at least 1024, then we can + * log everything that printk could have logged. */ + audit_log_move(ab); + avail = sizeof(ab->tmp) - ab->len; + len = vsnprintf(ab->tmp + ab->len, avail, fmt, args); + } + ab->len += (len < avail) ? len : avail; + ab->total += (len < avail) ? len : avail; +} + +/* Format a message into the audit buffer. All the work is done in + * audit_log_vformat. */ +void audit_log_format(struct audit_buffer *ab, const char *fmt, ...) +{ + va_list args; + + if (!ab) + return; + va_start(args, fmt); + audit_log_vformat(ab, fmt, args); + va_end(args); +} + +/* This is a helper-function to print the d_path without using a static + * buffer or allocating another buffer in addition to the one in + * audit_buffer. */ +void audit_log_d_path(struct audit_buffer *ab, const char *prefix, + struct dentry *dentry, struct vfsmount *vfsmnt) +{ + char *p; + int len, avail; + + if (prefix) audit_log_format(ab, " %s", prefix); + + if (ab->len > 128) + audit_log_move(ab); + avail = sizeof(ab->tmp) - ab->len; + p = d_path(dentry, vfsmnt, ab->tmp + ab->len, avail); + if (IS_ERR(p)) { + /* FIXME: can we save some information here? */ + audit_log_format(ab, ""); + } else { + /* path isn't at start of buffer */ + len = (ab->tmp + sizeof(ab->tmp) - 1) - p; + memmove(ab->tmp + ab->len, p, len); + ab->len += len; + ab->total += len; + } +} + +/* Remove queued messages from the audit_txlist and send them to userspace. */ +static void audit_tasklet_handler(unsigned long arg) +{ + LIST_HEAD(list); + struct audit_buffer *ab; + unsigned long flags; + + spin_lock_irqsave(&audit_txlist_lock, flags); + list_splice_init(&audit_txlist, &list); + spin_unlock_irqrestore(&audit_txlist_lock, flags); + + while (!list_empty(&list)) { + ab = list_entry(list.next, struct audit_buffer, list); + list_del(&ab->list); + audit_log_end_fast(ab); + } +} + +static DECLARE_TASKLET(audit_tasklet, audit_tasklet_handler, 0); + +/* The netlink_* functions cannot be called inside an irq context, so + * the audit buffer is places on a queue and a tasklet is scheduled to + * remove them from the queue outside the irq context. May be called in + * any context. */ +static void audit_log_end_irq(struct audit_buffer *ab) +{ + unsigned long flags; + + if (!ab) + return; + spin_lock_irqsave(&audit_txlist_lock, flags); + list_add_tail(&ab->list, &audit_txlist); + spin_unlock_irqrestore(&audit_txlist_lock, flags); + + tasklet_schedule(&audit_tasklet); +} + +/* Send the message in the audit buffer directly to user space. May not + * be called in an irq context. */ +static void audit_log_end_fast(struct audit_buffer *ab) +{ + unsigned long flags; + + BUG_ON(in_irq()); + if (!ab) + return; + if (!audit_rate_check()) { + audit_log_lost("rate limit exceeded"); + } else { + audit_log_move(ab); + if (audit_log_drain(ab)) + return; + } + + atomic_dec(&audit_backlog); + spin_lock_irqsave(&audit_freelist_lock, flags); + if (++audit_freelist_count > AUDIT_MAXFREE) + kfree(ab); + else + list_add(&ab->list, &audit_freelist); + spin_unlock_irqrestore(&audit_freelist_lock, flags); +} + +/* Send or queue the message in the audit buffer, depending on the + * current context. (A convenience function that may be called in any + * context.) */ +void audit_log_end(struct audit_buffer *ab) +{ + if (in_irq()) + audit_log_end_irq(ab); + else + audit_log_end_fast(ab); +} + +/* Log an audit record. This is a convenience function that calls + * audit_log_start, audit_log_vformat, and audit_log_end. It may be + * called in any context. */ +void audit_log(struct audit_context *ctx, const char *fmt, ...) +{ + struct audit_buffer *ab; + va_list args; + + ab = audit_log_start(ctx); + if (ab) { + va_start(args, fmt); + audit_log_vformat(ab, fmt, args); + va_end(args); + audit_log_end(ab); + } +} -- cgit v1.1