From 1b92313d5ba993bb6e38a6205ccc64a7595cd0a6 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Mon, 10 Oct 2005 22:54:57 +1000 Subject: powerpc: Merge asm/irq.h Signed-off-by: Paul Mackerras --- include/asm-powerpc/irq.h | 500 ++++++++++++++++++++++++++++++++++++++++++++++ include/asm-ppc/irq.h | 424 --------------------------------------- include/asm-ppc64/irq.h | 120 ----------- 3 files changed, 500 insertions(+), 544 deletions(-) create mode 100644 include/asm-powerpc/irq.h delete mode 100644 include/asm-ppc/irq.h delete mode 100644 include/asm-ppc64/irq.h (limited to 'include') diff --git a/include/asm-powerpc/irq.h b/include/asm-powerpc/irq.h new file mode 100644 index 0000000..980393a --- /dev/null +++ b/include/asm-powerpc/irq.h @@ -0,0 +1,500 @@ +#ifdef __KERNEL__ +#ifndef _ASM_POWERPC_IRQ_H +#define _ASM_POWERPC_IRQ_H + +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include + +#include +#include + +/* this number is used when no interrupt has been assigned */ +#define NO_IRQ (-1) + +/* + * These constants are used for passing information about interrupt + * signal polarity and level/edge sensing to the low-level PIC chip + * drivers. + */ +#define IRQ_SENSE_MASK 0x1 +#define IRQ_SENSE_LEVEL 0x1 /* interrupt on active level */ +#define IRQ_SENSE_EDGE 0x0 /* interrupt triggered by edge */ + +#define IRQ_POLARITY_MASK 0x2 +#define IRQ_POLARITY_POSITIVE 0x2 /* high level or low->high edge */ +#define IRQ_POLARITY_NEGATIVE 0x0 /* low level or high->low edge */ + +/* + * IRQ line status macro IRQ_PER_CPU is used + */ +#define ARCH_HAS_IRQ_PER_CPU + +#define get_irq_desc(irq) (&irq_desc[(irq)]) + +/* Define a way to iterate across irqs. */ +#define for_each_irq(i) \ + for ((i) = 0; (i) < NR_IRQS; ++(i)) + +#ifdef CONFIG_PPC64 + +/* + * Maximum number of interrupt sources that we can handle. + */ +#define NR_IRQS 512 + +/* Interrupt numbers are virtual in case they are sparsely + * distributed by the hardware. + */ +extern unsigned int virt_irq_to_real_map[NR_IRQS]; + +/* Create a mapping for a real_irq if it doesn't already exist. + * Return the virtual irq as a convenience. + */ +int virt_irq_create_mapping(unsigned int real_irq); +void virt_irq_init(void); + +static inline unsigned int virt_irq_to_real(unsigned int virt_irq) +{ + return virt_irq_to_real_map[virt_irq]; +} + +extern unsigned int real_irq_to_virt_slowpath(unsigned int real_irq); + +/* + * List of interrupt controllers. + */ +#define IC_INVALID 0 +#define IC_OPEN_PIC 1 +#define IC_PPC_XIC 2 +#define IC_BPA_IIC 3 +#define IC_ISERIES 4 + +extern u64 ppc64_interrupt_controller; + +#else /* 32-bit */ + +#if defined(CONFIG_40x) +#include + +#ifndef NR_BOARD_IRQS +#define NR_BOARD_IRQS 0 +#endif + +#ifndef UIC_WIDTH /* Number of interrupts per device */ +#define UIC_WIDTH 32 +#endif + +#ifndef NR_UICS /* number of UIC devices */ +#define NR_UICS 1 +#endif + +#if defined (CONFIG_403) +/* + * The PowerPC 403 cores' Asynchronous Interrupt Controller (AIC) has + * 32 possible interrupts, a majority of which are not implemented on + * all cores. There are six configurable, external interrupt pins and + * there are eight internal interrupts for the on-chip serial port + * (SPU), DMA controller, and JTAG controller. + * + */ + +#define NR_AIC_IRQS 32 +#define NR_IRQS (NR_AIC_IRQS + NR_BOARD_IRQS) + +#elif !defined (CONFIG_403) + +/* + * The PowerPC 405 cores' Universal Interrupt Controller (UIC) has 32 + * possible interrupts as well. There are seven, configurable external + * interrupt pins and there are 17 internal interrupts for the on-chip + * serial port, DMA controller, on-chip Ethernet controller, PCI, etc. + * + */ + + +#define NR_UIC_IRQS UIC_WIDTH +#define NR_IRQS ((NR_UIC_IRQS * NR_UICS) + NR_BOARD_IRQS) +#endif + +#elif defined(CONFIG_44x) +#include + +#define NR_UIC_IRQS 32 +#define NR_IRQS ((NR_UIC_IRQS * NR_UICS) + NR_BOARD_IRQS) + +#elif defined(CONFIG_8xx) + +/* Now include the board configuration specific associations. +*/ +#include + +/* The MPC8xx cores have 16 possible interrupts. There are eight + * possible level sensitive interrupts assigned and generated internally + * from such devices as CPM, PCMCIA, RTC, PIT, TimeBase and Decrementer. + * There are eight external interrupts (IRQs) that can be configured + * as either level or edge sensitive. + * + * On some implementations, there is also the possibility of an 8259 + * through the PCI and PCI-ISA bridges. + * + * We are "flattening" the interrupt vectors of the cascaded CPM + * and 8259 interrupt controllers so that we can uniquely identify + * any interrupt source with a single integer. + */ +#define NR_SIU_INTS 16 +#define NR_CPM_INTS 32 +#ifndef NR_8259_INTS +#define NR_8259_INTS 0 +#endif + +#define SIU_IRQ_OFFSET 0 +#define CPM_IRQ_OFFSET (SIU_IRQ_OFFSET + NR_SIU_INTS) +#define I8259_IRQ_OFFSET (CPM_IRQ_OFFSET + NR_CPM_INTS) + +#define NR_IRQS (NR_SIU_INTS + NR_CPM_INTS + NR_8259_INTS) + +/* These values must be zero-based and map 1:1 with the SIU configuration. + * They are used throughout the 8xx I/O subsystem to generate + * interrupt masks, flags, and other control patterns. This is why the + * current kernel assumption of the 8259 as the base controller is such + * a pain in the butt. + */ +#define SIU_IRQ0 (0) /* Highest priority */ +#define SIU_LEVEL0 (1) +#define SIU_IRQ1 (2) +#define SIU_LEVEL1 (3) +#define SIU_IRQ2 (4) +#define SIU_LEVEL2 (5) +#define SIU_IRQ3 (6) +#define SIU_LEVEL3 (7) +#define SIU_IRQ4 (8) +#define SIU_LEVEL4 (9) +#define SIU_IRQ5 (10) +#define SIU_LEVEL5 (11) +#define SIU_IRQ6 (12) +#define SIU_LEVEL6 (13) +#define SIU_IRQ7 (14) +#define SIU_LEVEL7 (15) + +#define MPC8xx_INT_FEC1 SIU_LEVEL1 +#define MPC8xx_INT_FEC2 SIU_LEVEL3 + +#define MPC8xx_INT_SCC1 (CPM_IRQ_OFFSET + CPMVEC_SCC1) +#define MPC8xx_INT_SCC2 (CPM_IRQ_OFFSET + CPMVEC_SCC2) +#define MPC8xx_INT_SCC3 (CPM_IRQ_OFFSET + CPMVEC_SCC3) +#define MPC8xx_INT_SCC4 (CPM_IRQ_OFFSET + CPMVEC_SCC4) +#define MPC8xx_INT_SMC1 (CPM_IRQ_OFFSET + CPMVEC_SMC1) +#define MPC8xx_INT_SMC2 (CPM_IRQ_OFFSET + CPMVEC_SMC2) + +/* The internal interrupts we can configure as we see fit. + * My personal preference is CPM at level 2, which puts it above the + * MBX PCI/ISA/IDE interrupts. + */ +#ifndef PIT_INTERRUPT +#define PIT_INTERRUPT SIU_LEVEL0 +#endif +#ifndef CPM_INTERRUPT +#define CPM_INTERRUPT SIU_LEVEL2 +#endif +#ifndef PCMCIA_INTERRUPT +#define PCMCIA_INTERRUPT SIU_LEVEL6 +#endif +#ifndef DEC_INTERRUPT +#define DEC_INTERRUPT SIU_LEVEL7 +#endif + +/* Some internal interrupt registers use an 8-bit mask for the interrupt + * level instead of a number. + */ +#define mk_int_int_mask(IL) (1 << (7 - (IL/2))) + +#elif defined(CONFIG_83xx) +#include + +#define NR_IRQS (NR_IPIC_INTS) + +#elif defined(CONFIG_85xx) +/* Now include the board configuration specific associations. +*/ +#include + +/* The MPC8548 openpic has 48 internal interrupts and 12 external + * interrupts. + * + * We are "flattening" the interrupt vectors of the cascaded CPM + * so that we can uniquely identify any interrupt source with a + * single integer. + */ +#define NR_CPM_INTS 64 +#define NR_EPIC_INTS 60 +#ifndef NR_8259_INTS +#define NR_8259_INTS 0 +#endif +#define NUM_8259_INTERRUPTS NR_8259_INTS + +#ifndef CPM_IRQ_OFFSET +#define CPM_IRQ_OFFSET 0 +#endif + +#define NR_IRQS (NR_EPIC_INTS + NR_CPM_INTS + NR_8259_INTS) + +/* Internal IRQs on MPC85xx OpenPIC */ + +#ifndef MPC85xx_OPENPIC_IRQ_OFFSET +#ifdef CONFIG_CPM2 +#define MPC85xx_OPENPIC_IRQ_OFFSET (CPM_IRQ_OFFSET + NR_CPM_INTS) +#else +#define MPC85xx_OPENPIC_IRQ_OFFSET 0 +#endif +#endif + +/* Not all of these exist on all MPC85xx implementations */ +#define MPC85xx_IRQ_L2CACHE ( 0 + MPC85xx_OPENPIC_IRQ_OFFSET) +#define MPC85xx_IRQ_ECM ( 1 + MPC85xx_OPENPIC_IRQ_OFFSET) +#define MPC85xx_IRQ_DDR ( 2 + MPC85xx_OPENPIC_IRQ_OFFSET) +#define MPC85xx_IRQ_LBIU ( 3 + MPC85xx_OPENPIC_IRQ_OFFSET) +#define MPC85xx_IRQ_DMA0 ( 4 + MPC85xx_OPENPIC_IRQ_OFFSET) +#define MPC85xx_IRQ_DMA1 ( 5 + MPC85xx_OPENPIC_IRQ_OFFSET) +#define MPC85xx_IRQ_DMA2 ( 6 + MPC85xx_OPENPIC_IRQ_OFFSET) +#define MPC85xx_IRQ_DMA3 ( 7 + MPC85xx_OPENPIC_IRQ_OFFSET) +#define MPC85xx_IRQ_PCI1 ( 8 + MPC85xx_OPENPIC_IRQ_OFFSET) +#define MPC85xx_IRQ_PCI2 ( 9 + MPC85xx_OPENPIC_IRQ_OFFSET) +#define MPC85xx_IRQ_RIO_ERROR ( 9 + MPC85xx_OPENPIC_IRQ_OFFSET) +#define MPC85xx_IRQ_RIO_BELL (10 + MPC85xx_OPENPIC_IRQ_OFFSET) +#define MPC85xx_IRQ_RIO_TX (11 + MPC85xx_OPENPIC_IRQ_OFFSET) +#define MPC85xx_IRQ_RIO_RX (12 + MPC85xx_OPENPIC_IRQ_OFFSET) +#define MPC85xx_IRQ_TSEC1_TX (13 + MPC85xx_OPENPIC_IRQ_OFFSET) +#define MPC85xx_IRQ_TSEC1_RX (14 + MPC85xx_OPENPIC_IRQ_OFFSET) +#define MPC85xx_IRQ_TSEC3_TX (15 + MPC85xx_OPENPIC_IRQ_OFFSET) +#define MPC85xx_IRQ_TSEC3_RX (16 + MPC85xx_OPENPIC_IRQ_OFFSET) +#define MPC85xx_IRQ_TSEC3_ERROR (17 + MPC85xx_OPENPIC_IRQ_OFFSET) +#define MPC85xx_IRQ_TSEC1_ERROR (18 + MPC85xx_OPENPIC_IRQ_OFFSET) +#define MPC85xx_IRQ_TSEC2_TX (19 + MPC85xx_OPENPIC_IRQ_OFFSET) +#define MPC85xx_IRQ_TSEC2_RX (20 + MPC85xx_OPENPIC_IRQ_OFFSET) +#define MPC85xx_IRQ_TSEC4_TX (21 + MPC85xx_OPENPIC_IRQ_OFFSET) +#define MPC85xx_IRQ_TSEC4_RX (22 + MPC85xx_OPENPIC_IRQ_OFFSET) +#define MPC85xx_IRQ_TSEC4_ERROR (23 + MPC85xx_OPENPIC_IRQ_OFFSET) +#define MPC85xx_IRQ_TSEC2_ERROR (24 + MPC85xx_OPENPIC_IRQ_OFFSET) +#define MPC85xx_IRQ_FEC (25 + MPC85xx_OPENPIC_IRQ_OFFSET) +#define MPC85xx_IRQ_DUART (26 + MPC85xx_OPENPIC_IRQ_OFFSET) +#define MPC85xx_IRQ_IIC1 (27 + MPC85xx_OPENPIC_IRQ_OFFSET) +#define MPC85xx_IRQ_PERFMON (28 + MPC85xx_OPENPIC_IRQ_OFFSET) +#define MPC85xx_IRQ_SEC2 (29 + MPC85xx_OPENPIC_IRQ_OFFSET) +#define MPC85xx_IRQ_CPM (30 + MPC85xx_OPENPIC_IRQ_OFFSET) + +/* The 12 external interrupt lines */ +#define MPC85xx_IRQ_EXT0 (48 + MPC85xx_OPENPIC_IRQ_OFFSET) +#define MPC85xx_IRQ_EXT1 (49 + MPC85xx_OPENPIC_IRQ_OFFSET) +#define MPC85xx_IRQ_EXT2 (50 + MPC85xx_OPENPIC_IRQ_OFFSET) +#define MPC85xx_IRQ_EXT3 (51 + MPC85xx_OPENPIC_IRQ_OFFSET) +#define MPC85xx_IRQ_EXT4 (52 + MPC85xx_OPENPIC_IRQ_OFFSET) +#define MPC85xx_IRQ_EXT5 (53 + MPC85xx_OPENPIC_IRQ_OFFSET) +#define MPC85xx_IRQ_EXT6 (54 + MPC85xx_OPENPIC_IRQ_OFFSET) +#define MPC85xx_IRQ_EXT7 (55 + MPC85xx_OPENPIC_IRQ_OFFSET) +#define MPC85xx_IRQ_EXT8 (56 + MPC85xx_OPENPIC_IRQ_OFFSET) +#define MPC85xx_IRQ_EXT9 (57 + MPC85xx_OPENPIC_IRQ_OFFSET) +#define MPC85xx_IRQ_EXT10 (58 + MPC85xx_OPENPIC_IRQ_OFFSET) +#define MPC85xx_IRQ_EXT11 (59 + MPC85xx_OPENPIC_IRQ_OFFSET) + +/* CPM related interrupts */ +#define SIU_INT_ERROR ((uint)0x00+CPM_IRQ_OFFSET) +#define SIU_INT_I2C ((uint)0x01+CPM_IRQ_OFFSET) +#define SIU_INT_SPI ((uint)0x02+CPM_IRQ_OFFSET) +#define SIU_INT_RISC ((uint)0x03+CPM_IRQ_OFFSET) +#define SIU_INT_SMC1 ((uint)0x04+CPM_IRQ_OFFSET) +#define SIU_INT_SMC2 ((uint)0x05+CPM_IRQ_OFFSET) +#define SIU_INT_USB ((uint)0x0b+CPM_IRQ_OFFSET) +#define SIU_INT_TIMER1 ((uint)0x0c+CPM_IRQ_OFFSET) +#define SIU_INT_TIMER2 ((uint)0x0d+CPM_IRQ_OFFSET) +#define SIU_INT_TIMER3 ((uint)0x0e+CPM_IRQ_OFFSET) +#define SIU_INT_TIMER4 ((uint)0x0f+CPM_IRQ_OFFSET) +#define SIU_INT_FCC1 ((uint)0x20+CPM_IRQ_OFFSET) +#define SIU_INT_FCC2 ((uint)0x21+CPM_IRQ_OFFSET) +#define SIU_INT_FCC3 ((uint)0x22+CPM_IRQ_OFFSET) +#define SIU_INT_MCC1 ((uint)0x24+CPM_IRQ_OFFSET) +#define SIU_INT_MCC2 ((uint)0x25+CPM_IRQ_OFFSET) +#define SIU_INT_SCC1 ((uint)0x28+CPM_IRQ_OFFSET) +#define SIU_INT_SCC2 ((uint)0x29+CPM_IRQ_OFFSET) +#define SIU_INT_SCC3 ((uint)0x2a+CPM_IRQ_OFFSET) +#define SIU_INT_SCC4 ((uint)0x2b+CPM_IRQ_OFFSET) +#define SIU_INT_PC15 ((uint)0x30+CPM_IRQ_OFFSET) +#define SIU_INT_PC14 ((uint)0x31+CPM_IRQ_OFFSET) +#define SIU_INT_PC13 ((uint)0x32+CPM_IRQ_OFFSET) +#define SIU_INT_PC12 ((uint)0x33+CPM_IRQ_OFFSET) +#define SIU_INT_PC11 ((uint)0x34+CPM_IRQ_OFFSET) +#define SIU_INT_PC10 ((uint)0x35+CPM_IRQ_OFFSET) +#define SIU_INT_PC9 ((uint)0x36+CPM_IRQ_OFFSET) +#define SIU_INT_PC8 ((uint)0x37+CPM_IRQ_OFFSET) +#define SIU_INT_PC7 ((uint)0x38+CPM_IRQ_OFFSET) +#define SIU_INT_PC6 ((uint)0x39+CPM_IRQ_OFFSET) +#define SIU_INT_PC5 ((uint)0x3a+CPM_IRQ_OFFSET) +#define SIU_INT_PC4 ((uint)0x3b+CPM_IRQ_OFFSET) +#define SIU_INT_PC3 ((uint)0x3c+CPM_IRQ_OFFSET) +#define SIU_INT_PC2 ((uint)0x3d+CPM_IRQ_OFFSET) +#define SIU_INT_PC1 ((uint)0x3e+CPM_IRQ_OFFSET) +#define SIU_INT_PC0 ((uint)0x3f+CPM_IRQ_OFFSET) + +#else /* CONFIG_40x + CONFIG_8xx */ +/* + * this is the # irq's for all ppc arch's (pmac/chrp/prep) + * so it is the max of them all + */ +#define NR_IRQS 256 +#define __DO_IRQ_CANON 1 + +#ifndef CONFIG_8260 + +#define NUM_8259_INTERRUPTS 16 + +#else /* CONFIG_8260 */ + +/* The 8260 has an internal interrupt controller with a maximum of + * 64 IRQs. We will use NR_IRQs from above since it is large enough. + * Don't be confused by the 8260 documentation where they list an + * "interrupt number" and "interrupt vector". We are only interested + * in the interrupt vector. There are "reserved" holes where the + * vector number increases, but the interrupt number in the table does not. + * (Document errata updates have fixed this...make sure you have up to + * date processor documentation -- Dan). + */ + +#ifndef CPM_IRQ_OFFSET +#define CPM_IRQ_OFFSET 0 +#endif + +#define NR_CPM_INTS 64 + +#define SIU_INT_ERROR ((uint)0x00 + CPM_IRQ_OFFSET) +#define SIU_INT_I2C ((uint)0x01 + CPM_IRQ_OFFSET) +#define SIU_INT_SPI ((uint)0x02 + CPM_IRQ_OFFSET) +#define SIU_INT_RISC ((uint)0x03 + CPM_IRQ_OFFSET) +#define SIU_INT_SMC1 ((uint)0x04 + CPM_IRQ_OFFSET) +#define SIU_INT_SMC2 ((uint)0x05 + CPM_IRQ_OFFSET) +#define SIU_INT_IDMA1 ((uint)0x06 + CPM_IRQ_OFFSET) +#define SIU_INT_IDMA2 ((uint)0x07 + CPM_IRQ_OFFSET) +#define SIU_INT_IDMA3 ((uint)0x08 + CPM_IRQ_OFFSET) +#define SIU_INT_IDMA4 ((uint)0x09 + CPM_IRQ_OFFSET) +#define SIU_INT_SDMA ((uint)0x0a + CPM_IRQ_OFFSET) +#define SIU_INT_USB ((uint)0x0b + CPM_IRQ_OFFSET) +#define SIU_INT_TIMER1 ((uint)0x0c + CPM_IRQ_OFFSET) +#define SIU_INT_TIMER2 ((uint)0x0d + CPM_IRQ_OFFSET) +#define SIU_INT_TIMER3 ((uint)0x0e + CPM_IRQ_OFFSET) +#define SIU_INT_TIMER4 ((uint)0x0f + CPM_IRQ_OFFSET) +#define SIU_INT_TMCNT ((uint)0x10 + CPM_IRQ_OFFSET) +#define SIU_INT_PIT ((uint)0x11 + CPM_IRQ_OFFSET) +#define SIU_INT_IRQ1 ((uint)0x13 + CPM_IRQ_OFFSET) +#define SIU_INT_IRQ2 ((uint)0x14 + CPM_IRQ_OFFSET) +#define SIU_INT_IRQ3 ((uint)0x15 + CPM_IRQ_OFFSET) +#define SIU_INT_IRQ4 ((uint)0x16 + CPM_IRQ_OFFSET) +#define SIU_INT_IRQ5 ((uint)0x17 + CPM_IRQ_OFFSET) +#define SIU_INT_IRQ6 ((uint)0x18 + CPM_IRQ_OFFSET) +#define SIU_INT_IRQ7 ((uint)0x19 + CPM_IRQ_OFFSET) +#define SIU_INT_FCC1 ((uint)0x20 + CPM_IRQ_OFFSET) +#define SIU_INT_FCC2 ((uint)0x21 + CPM_IRQ_OFFSET) +#define SIU_INT_FCC3 ((uint)0x22 + CPM_IRQ_OFFSET) +#define SIU_INT_MCC1 ((uint)0x24 + CPM_IRQ_OFFSET) +#define SIU_INT_MCC2 ((uint)0x25 + CPM_IRQ_OFFSET) +#define SIU_INT_SCC1 ((uint)0x28 + CPM_IRQ_OFFSET) +#define SIU_INT_SCC2 ((uint)0x29 + CPM_IRQ_OFFSET) +#define SIU_INT_SCC3 ((uint)0x2a + CPM_IRQ_OFFSET) +#define SIU_INT_SCC4 ((uint)0x2b + CPM_IRQ_OFFSET) +#define SIU_INT_PC15 ((uint)0x30 + CPM_IRQ_OFFSET) +#define SIU_INT_PC14 ((uint)0x31 + CPM_IRQ_OFFSET) +#define SIU_INT_PC13 ((uint)0x32 + CPM_IRQ_OFFSET) +#define SIU_INT_PC12 ((uint)0x33 + CPM_IRQ_OFFSET) +#define SIU_INT_PC11 ((uint)0x34 + CPM_IRQ_OFFSET) +#define SIU_INT_PC10 ((uint)0x35 + CPM_IRQ_OFFSET) +#define SIU_INT_PC9 ((uint)0x36 + CPM_IRQ_OFFSET) +#define SIU_INT_PC8 ((uint)0x37 + CPM_IRQ_OFFSET) +#define SIU_INT_PC7 ((uint)0x38 + CPM_IRQ_OFFSET) +#define SIU_INT_PC6 ((uint)0x39 + CPM_IRQ_OFFSET) +#define SIU_INT_PC5 ((uint)0x3a + CPM_IRQ_OFFSET) +#define SIU_INT_PC4 ((uint)0x3b + CPM_IRQ_OFFSET) +#define SIU_INT_PC3 ((uint)0x3c + CPM_IRQ_OFFSET) +#define SIU_INT_PC2 ((uint)0x3d + CPM_IRQ_OFFSET) +#define SIU_INT_PC1 ((uint)0x3e + CPM_IRQ_OFFSET) +#define SIU_INT_PC0 ((uint)0x3f + CPM_IRQ_OFFSET) + +#endif /* CONFIG_8260 */ + +#endif + +#define NR_MASK_WORDS ((NR_IRQS + 31) / 32) +/* pedantic: these are long because they are used with set_bit --RR */ +extern unsigned long ppc_cached_irq_mask[NR_MASK_WORDS]; +extern unsigned long ppc_lost_interrupts[NR_MASK_WORDS]; +extern atomic_t ppc_n_lost_interrupts; + +#endif + +/* + * Because many systems have two overlapping names spaces for + * interrupts (ISA and XICS for example), and the ISA interrupts + * have historically not been easy to renumber, we allow ISA + * interrupts to take values 0 - 15, and shift up the remaining + * interrupts by 0x10. + */ +#define NUM_ISA_INTERRUPTS 0x10 +extern int __irq_offset_value; + +static inline int irq_offset_up(int irq) +{ + return(irq + __irq_offset_value); +} + +static inline int irq_offset_down(int irq) +{ + return(irq - __irq_offset_value); +} + +static inline int irq_offset_value(void) +{ + return __irq_offset_value; +} + +#ifdef __DO_IRQ_CANON +extern int ppc_do_canonicalize_irqs; +#else +#define ppc_do_canonicalize_irqs 0 +#endif + +static __inline__ int irq_canonicalize(int irq) +{ + if (ppc_do_canonicalize_irqs && irq == 2) + irq = 9; + return irq; +} + +extern int distribute_irqs; + +struct irqaction; +struct pt_regs; + +#ifdef CONFIG_IRQSTACKS +/* + * Per-cpu stacks for handling hard and soft interrupts. + */ +extern struct thread_info *hardirq_ctx[NR_CPUS]; +extern struct thread_info *softirq_ctx[NR_CPUS]; + +extern void irq_ctx_init(void); +extern void call_do_softirq(struct thread_info *tp); +extern int call_handle_IRQ_event(int irq, struct pt_regs *regs, + struct irqaction *action, struct thread_info *tp); + +#define __ARCH_HAS_DO_SOFTIRQ + +#else +#define irq_ctx_init() + +#endif /* CONFIG_IRQSTACKS */ + +#endif /* _ASM_IRQ_H */ +#endif /* __KERNEL__ */ diff --git a/include/asm-ppc/irq.h b/include/asm-ppc/irq.h deleted file mode 100644 index 137ea0c..0000000 --- a/include/asm-ppc/irq.h +++ /dev/null @@ -1,424 +0,0 @@ -#ifdef __KERNEL__ -#ifndef _ASM_IRQ_H -#define _ASM_IRQ_H - -#include -#include /* ppc_md */ -#include - -/* - * These constants are used for passing information about interrupt - * signal polarity and level/edge sensing to the low-level PIC chip - * drivers. - */ -#define IRQ_SENSE_MASK 0x1 -#define IRQ_SENSE_LEVEL 0x1 /* interrupt on active level */ -#define IRQ_SENSE_EDGE 0x0 /* interrupt triggered by edge */ - -#define IRQ_POLARITY_MASK 0x2 -#define IRQ_POLARITY_POSITIVE 0x2 /* high level or low->high edge */ -#define IRQ_POLARITY_NEGATIVE 0x0 /* low level or high->low edge */ - -/* - * IRQ line status macro IRQ_PER_CPU is used - */ -#define ARCH_HAS_IRQ_PER_CPU - -#define get_irq_desc(irq) (&irq_desc[(irq)]) - -/* Define a way to iterate across irqs. */ -#define for_each_irq(i) \ - for ((i) = 0; (i) < NR_IRQS; ++(i)) - -#if defined(CONFIG_40x) -#include - -#ifndef NR_BOARD_IRQS -#define NR_BOARD_IRQS 0 -#endif - -#ifndef UIC_WIDTH /* Number of interrupts per device */ -#define UIC_WIDTH 32 -#endif - -#ifndef NR_UICS /* number of UIC devices */ -#define NR_UICS 1 -#endif - -#if defined (CONFIG_403) -/* - * The PowerPC 403 cores' Asynchronous Interrupt Controller (AIC) has - * 32 possible interrupts, a majority of which are not implemented on - * all cores. There are six configurable, external interrupt pins and - * there are eight internal interrupts for the on-chip serial port - * (SPU), DMA controller, and JTAG controller. - * - */ - -#define NR_AIC_IRQS 32 -#define NR_IRQS (NR_AIC_IRQS + NR_BOARD_IRQS) - -#elif !defined (CONFIG_403) - -/* - * The PowerPC 405 cores' Universal Interrupt Controller (UIC) has 32 - * possible interrupts as well. There are seven, configurable external - * interrupt pins and there are 17 internal interrupts for the on-chip - * serial port, DMA controller, on-chip Ethernet controller, PCI, etc. - * - */ - - -#define NR_UIC_IRQS UIC_WIDTH -#define NR_IRQS ((NR_UIC_IRQS * NR_UICS) + NR_BOARD_IRQS) -#endif -static __inline__ int -irq_canonicalize(int irq) -{ - return (irq); -} - -#elif defined(CONFIG_44x) -#include - -#define NR_UIC_IRQS 32 -#define NR_IRQS ((NR_UIC_IRQS * NR_UICS) + NR_BOARD_IRQS) - -static __inline__ int -irq_canonicalize(int irq) -{ - return (irq); -} - -#elif defined(CONFIG_8xx) - -/* Now include the board configuration specific associations. -*/ -#include - -/* The MPC8xx cores have 16 possible interrupts. There are eight - * possible level sensitive interrupts assigned and generated internally - * from such devices as CPM, PCMCIA, RTC, PIT, TimeBase and Decrementer. - * There are eight external interrupts (IRQs) that can be configured - * as either level or edge sensitive. - * - * On some implementations, there is also the possibility of an 8259 - * through the PCI and PCI-ISA bridges. - * - * We are "flattening" the interrupt vectors of the cascaded CPM - * and 8259 interrupt controllers so that we can uniquely identify - * any interrupt source with a single integer. - */ -#define NR_SIU_INTS 16 -#define NR_CPM_INTS 32 -#ifndef NR_8259_INTS -#define NR_8259_INTS 0 -#endif - -#define SIU_IRQ_OFFSET 0 -#define CPM_IRQ_OFFSET (SIU_IRQ_OFFSET + NR_SIU_INTS) -#define I8259_IRQ_OFFSET (CPM_IRQ_OFFSET + NR_CPM_INTS) - -#define NR_IRQS (NR_SIU_INTS + NR_CPM_INTS + NR_8259_INTS) - -/* These values must be zero-based and map 1:1 with the SIU configuration. - * They are used throughout the 8xx I/O subsystem to generate - * interrupt masks, flags, and other control patterns. This is why the - * current kernel assumption of the 8259 as the base controller is such - * a pain in the butt. - */ -#define SIU_IRQ0 (0) /* Highest priority */ -#define SIU_LEVEL0 (1) -#define SIU_IRQ1 (2) -#define SIU_LEVEL1 (3) -#define SIU_IRQ2 (4) -#define SIU_LEVEL2 (5) -#define SIU_IRQ3 (6) -#define SIU_LEVEL3 (7) -#define SIU_IRQ4 (8) -#define SIU_LEVEL4 (9) -#define SIU_IRQ5 (10) -#define SIU_LEVEL5 (11) -#define SIU_IRQ6 (12) -#define SIU_LEVEL6 (13) -#define SIU_IRQ7 (14) -#define SIU_LEVEL7 (15) - -#define MPC8xx_INT_FEC1 SIU_LEVEL1 -#define MPC8xx_INT_FEC2 SIU_LEVEL3 - -#define MPC8xx_INT_SCC1 (CPM_IRQ_OFFSET + CPMVEC_SCC1) -#define MPC8xx_INT_SCC2 (CPM_IRQ_OFFSET + CPMVEC_SCC2) -#define MPC8xx_INT_SCC3 (CPM_IRQ_OFFSET + CPMVEC_SCC3) -#define MPC8xx_INT_SCC4 (CPM_IRQ_OFFSET + CPMVEC_SCC4) -#define MPC8xx_INT_SMC1 (CPM_IRQ_OFFSET + CPMVEC_SMC1) -#define MPC8xx_INT_SMC2 (CPM_IRQ_OFFSET + CPMVEC_SMC2) - -/* The internal interrupts we can configure as we see fit. - * My personal preference is CPM at level 2, which puts it above the - * MBX PCI/ISA/IDE interrupts. - */ -#ifndef PIT_INTERRUPT -#define PIT_INTERRUPT SIU_LEVEL0 -#endif -#ifndef CPM_INTERRUPT -#define CPM_INTERRUPT SIU_LEVEL2 -#endif -#ifndef PCMCIA_INTERRUPT -#define PCMCIA_INTERRUPT SIU_LEVEL6 -#endif -#ifndef DEC_INTERRUPT -#define DEC_INTERRUPT SIU_LEVEL7 -#endif - -/* Some internal interrupt registers use an 8-bit mask for the interrupt - * level instead of a number. - */ -#define mk_int_int_mask(IL) (1 << (7 - (IL/2))) - -/* always the same on 8xx -- Cort */ -static __inline__ int irq_canonicalize(int irq) -{ - return irq; -} - -#elif defined(CONFIG_83xx) -#include - -static __inline__ int irq_canonicalize(int irq) -{ - return irq; -} - -#define NR_IRQS (NR_IPIC_INTS) - -#elif defined(CONFIG_85xx) -/* Now include the board configuration specific associations. -*/ -#include - -/* The MPC8548 openpic has 48 internal interrupts and 12 external - * interrupts. - * - * We are "flattening" the interrupt vectors of the cascaded CPM - * so that we can uniquely identify any interrupt source with a - * single integer. - */ -#define NR_CPM_INTS 64 -#define NR_EPIC_INTS 60 -#ifndef NR_8259_INTS -#define NR_8259_INTS 0 -#endif -#define NUM_8259_INTERRUPTS NR_8259_INTS - -#ifndef CPM_IRQ_OFFSET -#define CPM_IRQ_OFFSET 0 -#endif - -#define NR_IRQS (NR_EPIC_INTS + NR_CPM_INTS + NR_8259_INTS) - -/* Internal IRQs on MPC85xx OpenPIC */ - -#ifndef MPC85xx_OPENPIC_IRQ_OFFSET -#ifdef CONFIG_CPM2 -#define MPC85xx_OPENPIC_IRQ_OFFSET (CPM_IRQ_OFFSET + NR_CPM_INTS) -#else -#define MPC85xx_OPENPIC_IRQ_OFFSET 0 -#endif -#endif - -/* Not all of these exist on all MPC85xx implementations */ -#define MPC85xx_IRQ_L2CACHE ( 0 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_ECM ( 1 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_DDR ( 2 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_LBIU ( 3 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_DMA0 ( 4 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_DMA1 ( 5 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_DMA2 ( 6 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_DMA3 ( 7 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_PCI1 ( 8 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_PCI2 ( 9 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_RIO_ERROR ( 9 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_RIO_BELL (10 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_RIO_TX (11 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_RIO_RX (12 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_TSEC1_TX (13 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_TSEC1_RX (14 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_TSEC3_TX (15 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_TSEC3_RX (16 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_TSEC3_ERROR (17 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_TSEC1_ERROR (18 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_TSEC2_TX (19 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_TSEC2_RX (20 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_TSEC4_TX (21 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_TSEC4_RX (22 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_TSEC4_ERROR (23 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_TSEC2_ERROR (24 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_FEC (25 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_DUART (26 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_IIC1 (27 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_PERFMON (28 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_SEC2 (29 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_CPM (30 + MPC85xx_OPENPIC_IRQ_OFFSET) - -/* The 12 external interrupt lines */ -#define MPC85xx_IRQ_EXT0 (48 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_EXT1 (49 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_EXT2 (50 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_EXT3 (51 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_EXT4 (52 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_EXT5 (53 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_EXT6 (54 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_EXT7 (55 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_EXT8 (56 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_EXT9 (57 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_EXT10 (58 + MPC85xx_OPENPIC_IRQ_OFFSET) -#define MPC85xx_IRQ_EXT11 (59 + MPC85xx_OPENPIC_IRQ_OFFSET) - -/* CPM related interrupts */ -#define SIU_INT_ERROR ((uint)0x00+CPM_IRQ_OFFSET) -#define SIU_INT_I2C ((uint)0x01+CPM_IRQ_OFFSET) -#define SIU_INT_SPI ((uint)0x02+CPM_IRQ_OFFSET) -#define SIU_INT_RISC ((uint)0x03+CPM_IRQ_OFFSET) -#define SIU_INT_SMC1 ((uint)0x04+CPM_IRQ_OFFSET) -#define SIU_INT_SMC2 ((uint)0x05+CPM_IRQ_OFFSET) -#define SIU_INT_USB ((uint)0x0b+CPM_IRQ_OFFSET) -#define SIU_INT_TIMER1 ((uint)0x0c+CPM_IRQ_OFFSET) -#define SIU_INT_TIMER2 ((uint)0x0d+CPM_IRQ_OFFSET) -#define SIU_INT_TIMER3 ((uint)0x0e+CPM_IRQ_OFFSET) -#define SIU_INT_TIMER4 ((uint)0x0f+CPM_IRQ_OFFSET) -#define SIU_INT_FCC1 ((uint)0x20+CPM_IRQ_OFFSET) -#define SIU_INT_FCC2 ((uint)0x21+CPM_IRQ_OFFSET) -#define SIU_INT_FCC3 ((uint)0x22+CPM_IRQ_OFFSET) -#define SIU_INT_MCC1 ((uint)0x24+CPM_IRQ_OFFSET) -#define SIU_INT_MCC2 ((uint)0x25+CPM_IRQ_OFFSET) -#define SIU_INT_SCC1 ((uint)0x28+CPM_IRQ_OFFSET) -#define SIU_INT_SCC2 ((uint)0x29+CPM_IRQ_OFFSET) -#define SIU_INT_SCC3 ((uint)0x2a+CPM_IRQ_OFFSET) -#define SIU_INT_SCC4 ((uint)0x2b+CPM_IRQ_OFFSET) -#define SIU_INT_PC15 ((uint)0x30+CPM_IRQ_OFFSET) -#define SIU_INT_PC14 ((uint)0x31+CPM_IRQ_OFFSET) -#define SIU_INT_PC13 ((uint)0x32+CPM_IRQ_OFFSET) -#define SIU_INT_PC12 ((uint)0x33+CPM_IRQ_OFFSET) -#define SIU_INT_PC11 ((uint)0x34+CPM_IRQ_OFFSET) -#define SIU_INT_PC10 ((uint)0x35+CPM_IRQ_OFFSET) -#define SIU_INT_PC9 ((uint)0x36+CPM_IRQ_OFFSET) -#define SIU_INT_PC8 ((uint)0x37+CPM_IRQ_OFFSET) -#define SIU_INT_PC7 ((uint)0x38+CPM_IRQ_OFFSET) -#define SIU_INT_PC6 ((uint)0x39+CPM_IRQ_OFFSET) -#define SIU_INT_PC5 ((uint)0x3a+CPM_IRQ_OFFSET) -#define SIU_INT_PC4 ((uint)0x3b+CPM_IRQ_OFFSET) -#define SIU_INT_PC3 ((uint)0x3c+CPM_IRQ_OFFSET) -#define SIU_INT_PC2 ((uint)0x3d+CPM_IRQ_OFFSET) -#define SIU_INT_PC1 ((uint)0x3e+CPM_IRQ_OFFSET) -#define SIU_INT_PC0 ((uint)0x3f+CPM_IRQ_OFFSET) - -static __inline__ int irq_canonicalize(int irq) -{ - return irq; -} - -#else /* CONFIG_40x + CONFIG_8xx */ -/* - * this is the # irq's for all ppc arch's (pmac/chrp/prep) - * so it is the max of them all - */ -#define NR_IRQS 256 - -#ifndef CONFIG_8260 - -#define NUM_8259_INTERRUPTS 16 - -#else /* CONFIG_8260 */ - -/* The 8260 has an internal interrupt controller with a maximum of - * 64 IRQs. We will use NR_IRQs from above since it is large enough. - * Don't be confused by the 8260 documentation where they list an - * "interrupt number" and "interrupt vector". We are only interested - * in the interrupt vector. There are "reserved" holes where the - * vector number increases, but the interrupt number in the table does not. - * (Document errata updates have fixed this...make sure you have up to - * date processor documentation -- Dan). - */ - -#ifndef CPM_IRQ_OFFSET -#define CPM_IRQ_OFFSET 0 -#endif - -#define NR_CPM_INTS 64 - -#define SIU_INT_ERROR ((uint)0x00 + CPM_IRQ_OFFSET) -#define SIU_INT_I2C ((uint)0x01 + CPM_IRQ_OFFSET) -#define SIU_INT_SPI ((uint)0x02 + CPM_IRQ_OFFSET) -#define SIU_INT_RISC ((uint)0x03 + CPM_IRQ_OFFSET) -#define SIU_INT_SMC1 ((uint)0x04 + CPM_IRQ_OFFSET) -#define SIU_INT_SMC2 ((uint)0x05 + CPM_IRQ_OFFSET) -#define SIU_INT_IDMA1 ((uint)0x06 + CPM_IRQ_OFFSET) -#define SIU_INT_IDMA2 ((uint)0x07 + CPM_IRQ_OFFSET) -#define SIU_INT_IDMA3 ((uint)0x08 + CPM_IRQ_OFFSET) -#define SIU_INT_IDMA4 ((uint)0x09 + CPM_IRQ_OFFSET) -#define SIU_INT_SDMA ((uint)0x0a + CPM_IRQ_OFFSET) -#define SIU_INT_USB ((uint)0x0b + CPM_IRQ_OFFSET) -#define SIU_INT_TIMER1 ((uint)0x0c + CPM_IRQ_OFFSET) -#define SIU_INT_TIMER2 ((uint)0x0d + CPM_IRQ_OFFSET) -#define SIU_INT_TIMER3 ((uint)0x0e + CPM_IRQ_OFFSET) -#define SIU_INT_TIMER4 ((uint)0x0f + CPM_IRQ_OFFSET) -#define SIU_INT_TMCNT ((uint)0x10 + CPM_IRQ_OFFSET) -#define SIU_INT_PIT ((uint)0x11 + CPM_IRQ_OFFSET) -#define SIU_INT_IRQ1 ((uint)0x13 + CPM_IRQ_OFFSET) -#define SIU_INT_IRQ2 ((uint)0x14 + CPM_IRQ_OFFSET) -#define SIU_INT_IRQ3 ((uint)0x15 + CPM_IRQ_OFFSET) -#define SIU_INT_IRQ4 ((uint)0x16 + CPM_IRQ_OFFSET) -#define SIU_INT_IRQ5 ((uint)0x17 + CPM_IRQ_OFFSET) -#define SIU_INT_IRQ6 ((uint)0x18 + CPM_IRQ_OFFSET) -#define SIU_INT_IRQ7 ((uint)0x19 + CPM_IRQ_OFFSET) -#define SIU_INT_FCC1 ((uint)0x20 + CPM_IRQ_OFFSET) -#define SIU_INT_FCC2 ((uint)0x21 + CPM_IRQ_OFFSET) -#define SIU_INT_FCC3 ((uint)0x22 + CPM_IRQ_OFFSET) -#define SIU_INT_MCC1 ((uint)0x24 + CPM_IRQ_OFFSET) -#define SIU_INT_MCC2 ((uint)0x25 + CPM_IRQ_OFFSET) -#define SIU_INT_SCC1 ((uint)0x28 + CPM_IRQ_OFFSET) -#define SIU_INT_SCC2 ((uint)0x29 + CPM_IRQ_OFFSET) -#define SIU_INT_SCC3 ((uint)0x2a + CPM_IRQ_OFFSET) -#define SIU_INT_SCC4 ((uint)0x2b + CPM_IRQ_OFFSET) -#define SIU_INT_PC15 ((uint)0x30 + CPM_IRQ_OFFSET) -#define SIU_INT_PC14 ((uint)0x31 + CPM_IRQ_OFFSET) -#define SIU_INT_PC13 ((uint)0x32 + CPM_IRQ_OFFSET) -#define SIU_INT_PC12 ((uint)0x33 + CPM_IRQ_OFFSET) -#define SIU_INT_PC11 ((uint)0x34 + CPM_IRQ_OFFSET) -#define SIU_INT_PC10 ((uint)0x35 + CPM_IRQ_OFFSET) -#define SIU_INT_PC9 ((uint)0x36 + CPM_IRQ_OFFSET) -#define SIU_INT_PC8 ((uint)0x37 + CPM_IRQ_OFFSET) -#define SIU_INT_PC7 ((uint)0x38 + CPM_IRQ_OFFSET) -#define SIU_INT_PC6 ((uint)0x39 + CPM_IRQ_OFFSET) -#define SIU_INT_PC5 ((uint)0x3a + CPM_IRQ_OFFSET) -#define SIU_INT_PC4 ((uint)0x3b + CPM_IRQ_OFFSET) -#define SIU_INT_PC3 ((uint)0x3c + CPM_IRQ_OFFSET) -#define SIU_INT_PC2 ((uint)0x3d + CPM_IRQ_OFFSET) -#define SIU_INT_PC1 ((uint)0x3e + CPM_IRQ_OFFSET) -#define SIU_INT_PC0 ((uint)0x3f + CPM_IRQ_OFFSET) - -#endif /* CONFIG_8260 */ - -/* - * This gets called from serial.c, which is now used on - * powermacs as well as prep/chrp boxes. - * Prep and chrp both have cascaded 8259 PICs. - */ -static __inline__ int irq_canonicalize(int irq) -{ - if (ppc_md.irq_canonicalize) - return ppc_md.irq_canonicalize(irq); - return irq; -} - -#endif - -#define NR_MASK_WORDS ((NR_IRQS + 31) / 32) -/* pedantic: these are long because they are used with set_bit --RR */ -extern unsigned long ppc_cached_irq_mask[NR_MASK_WORDS]; -extern unsigned long ppc_lost_interrupts[NR_MASK_WORDS]; -extern atomic_t ppc_n_lost_interrupts; - -#endif /* _ASM_IRQ_H */ -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc64/irq.h b/include/asm-ppc64/irq.h deleted file mode 100644 index 99782af..0000000 --- a/include/asm-ppc64/irq.h +++ /dev/null @@ -1,120 +0,0 @@ -#ifdef __KERNEL__ -#ifndef _ASM_IRQ_H -#define _ASM_IRQ_H - -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include -#include - -/* - * Maximum number of interrupt sources that we can handle. - */ -#define NR_IRQS 512 - -/* this number is used when no interrupt has been assigned */ -#define NO_IRQ (-1) - -/* - * These constants are used for passing information about interrupt - * signal polarity and level/edge sensing to the low-level PIC chip - * drivers. - */ -#define IRQ_SENSE_MASK 0x1 -#define IRQ_SENSE_LEVEL 0x1 /* interrupt on active level */ -#define IRQ_SENSE_EDGE 0x0 /* interrupt triggered by edge */ - -#define IRQ_POLARITY_MASK 0x2 -#define IRQ_POLARITY_POSITIVE 0x2 /* high level or low->high edge */ -#define IRQ_POLARITY_NEGATIVE 0x0 /* low level or high->low edge */ - -/* - * IRQ line status macro IRQ_PER_CPU is used - */ -#define ARCH_HAS_IRQ_PER_CPU - -#define get_irq_desc(irq) (&irq_desc[(irq)]) - -/* Define a way to iterate across irqs. */ -#define for_each_irq(i) \ - for ((i) = 0; (i) < NR_IRQS; ++(i)) - -/* Interrupt numbers are virtual in case they are sparsely - * distributed by the hardware. - */ -extern unsigned int virt_irq_to_real_map[NR_IRQS]; - -/* Create a mapping for a real_irq if it doesn't already exist. - * Return the virtual irq as a convenience. - */ -int virt_irq_create_mapping(unsigned int real_irq); -void virt_irq_init(void); - -static inline unsigned int virt_irq_to_real(unsigned int virt_irq) -{ - return virt_irq_to_real_map[virt_irq]; -} - -extern unsigned int real_irq_to_virt_slowpath(unsigned int real_irq); - -/* - * Because many systems have two overlapping names spaces for - * interrupts (ISA and XICS for example), and the ISA interrupts - * have historically not been easy to renumber, we allow ISA - * interrupts to take values 0 - 15, and shift up the remaining - * interrupts by 0x10. - */ -#define NUM_ISA_INTERRUPTS 0x10 -extern int __irq_offset_value; - -static inline int irq_offset_up(int irq) -{ - return(irq + __irq_offset_value); -} - -static inline int irq_offset_down(int irq) -{ - return(irq - __irq_offset_value); -} - -static inline int irq_offset_value(void) -{ - return __irq_offset_value; -} - -static __inline__ int irq_canonicalize(int irq) -{ - return irq; -} - -extern int distribute_irqs; - -struct irqaction; -struct pt_regs; - -#ifdef CONFIG_IRQSTACKS -/* - * Per-cpu stacks for handling hard and soft interrupts. - */ -extern struct thread_info *hardirq_ctx[NR_CPUS]; -extern struct thread_info *softirq_ctx[NR_CPUS]; - -extern void irq_ctx_init(void); -extern void call_do_softirq(struct thread_info *tp); -extern int call_handle_IRQ_event(int irq, struct pt_regs *regs, - struct irqaction *action, struct thread_info *tp); - -#define __ARCH_HAS_DO_SOFTIRQ - -#else -#define irq_ctx_init() - -#endif /* CONFIG_IRQSTACKS */ - -#endif /* _ASM_IRQ_H */ -#endif /* __KERNEL__ */ -- cgit v1.1