From c7a6ee27abd46247c1c7edfc49fb935138da7875 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 12 Dec 2012 17:50:39 +0100 Subject: cfg80211: allow drivers to selectively disable 80/160 MHz Some drivers might support 80 or 160 MHz only on some channels for whatever reason, so allow them to disable these channel widths. Also maintain the new flags when regulatory bandwidth limitations would disable these wide channels. Reviewed-by: Luis R. Rodriguez Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'include/net') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index ee11a3d..8a9200f 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -100,6 +100,16 @@ enum ieee80211_band { * @IEEE80211_CHAN_NO_HT40MINUS: extension channel below this channel * is not permitted. * @IEEE80211_CHAN_NO_OFDM: OFDM is not allowed on this channel. + * @IEEE80211_CHAN_NO_80MHZ: If the driver supports 80 MHz on the band, + * this flag indicates that an 80 MHz channel cannot use this + * channel as the control or any of the secondary channels. + * This may be due to the driver or due to regulatory bandwidth + * restrictions. + * @IEEE80211_CHAN_NO_160MHZ: If the driver supports 160 MHz on the band, + * this flag indicates that an 160 MHz channel cannot use this + * channel as the control or any of the secondary channels. + * This may be due to the driver or due to regulatory bandwidth + * restrictions. */ enum ieee80211_channel_flags { IEEE80211_CHAN_DISABLED = 1<<0, @@ -109,6 +119,8 @@ enum ieee80211_channel_flags { IEEE80211_CHAN_NO_HT40PLUS = 1<<4, IEEE80211_CHAN_NO_HT40MINUS = 1<<5, IEEE80211_CHAN_NO_OFDM = 1<<6, + IEEE80211_CHAN_NO_80MHZ = 1<<7, + IEEE80211_CHAN_NO_160MHZ = 1<<8, }; #define IEEE80211_CHAN_NO_HT40 \ -- cgit v1.1