From 2b13f7d4e3822ed4de37b73b009ff81932e884bb Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki <s.nawrocki@samsung.com> Date: Fri, 29 Mar 2013 14:12:39 -0300 Subject: [media] s5p-fimc: Add device tree based sensors registration The sensor (I2C and/or SPI client) devices are instantiated by their corresponding control bus drivers. Since the I2C client's master clock is often provided by a video bus receiver (host interface) or other than I2C/SPI controller device, the drivers of those client devices are not accessing hardware in their driver's probe() callback. Instead, after enabling clock, the host driver calls back into a sub-device when it wants to activate them. This pattern is used by some in-tree drivers and this patch also uses it for DT case. This patch is intended as a first step for adding device tree support to the S5P/Exynos SoC camera drivers. The second one is adding support for asynchronous sub-devices registration and clock control from sub-device driver level. The bindings shall not change when asynchronous probing support is added. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> --- include/media/s5p_fimc.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/media') diff --git a/include/media/s5p_fimc.h b/include/media/s5p_fimc.h index e2c5989..e2434bb 100644 --- a/include/media/s5p_fimc.h +++ b/include/media/s5p_fimc.h @@ -45,6 +45,9 @@ enum fimc_bus_type { FIMC_BUS_TYPE_ISP_WRITEBACK = FIMC_BUS_TYPE_LCD_WRITEBACK_B, }; +#define fimc_input_is_parallel(x) ((x) == 1 || (x) == 2) +#define fimc_input_is_mipi_csi(x) ((x) == 3 || (x) == 4) + struct i2c_board_info; /** -- cgit v1.1