From 22cfbbfd9f67b67fe073010f51cb71d3632387d5 Mon Sep 17 00:00:00 2001 From: john stultz Date: Wed, 6 May 2009 11:43:57 +0200 Subject: ntp: adjust SHIFT_PLL to improve NTP convergence The conversion to the ntpv4 reference model f19923937321244e7dc334767eb4b67e0e3d5c74 ("ntp: convert to the NTP4 reference model") in 2.6.19 added nanosecond resolution the adjtimex interface, but also changed the "stiffness" of the frequency adjustments, causing NTP convergence time to greatly increase. SHIFT_PLL, which reduces the stiffness of the freq adjustments, was designed to be inversely linked to HZ, and the reference value of 4 was designed for Unix systems using HZ=100. However Linux's clock steering code mostly independent of HZ. So this patch reduces the SHIFT_PLL value from 4 to 2, which causes NTPd behavior to match kernels prior to 2.6.19, greatly reducing convergence times, and improving close synchronization through environmental thermal changes. The patch also changes some l's to L's in nearby code to avoid misreading 50l as 501. [ Impact: tweak NTP algorithm for faster convergence ] Signed-off-by: John Stultz Acked-by: Rik van Riel Cc: zippel@linux-m68k.org Signed-off-by: Andrew Morton LKML-Reference: <200905051956.n45JuVo9025575@imap1.linux-foundation.org> Signed-off-by: Ingo Molnar --- include/linux/timex.h | 42 +++++++++++++++++++++++++++++++----------- 1 file changed, 31 insertions(+), 11 deletions(-) (limited to 'include/linux') diff --git a/include/linux/timex.h b/include/linux/timex.h index aa3475f..0daf961 100644 --- a/include/linux/timex.h +++ b/include/linux/timex.h @@ -170,17 +170,37 @@ struct timex { #include /* - * SHIFT_KG and SHIFT_KF establish the damping of the PLL and are chosen - * for a slightly underdamped convergence characteristic. SHIFT_KH - * establishes the damping of the FLL and is chosen by wisdom and black - * art. + * SHIFT_PLL is used as a dampening factor to define how much we + * adjust the frequency correction for a given offset in PLL mode. + * It also used in dampening the offset correction, to define how + * much of the current value in time_offset we correct for each + * second. Changing this value changes the stiffness of the ntp + * adjustment code. A lower value makes it more flexible, reducing + * NTP convergence time. A higher value makes it stiffer, increasing + * convergence time, but making the clock more stable. * - * MAXTC establishes the maximum time constant of the PLL. With the - * SHIFT_KG and SHIFT_KF values given and a time constant range from - * zero to MAXTC, the PLL will converge in 15 minutes to 16 hours, - * respectively. + * In David Mills' nanokenrel reference implmentation SHIFT_PLL is 4. + * However this seems to increase convergence time much too long. + * + * https://lists.ntp.org/pipermail/hackers/2008-January/003487.html + * + * In the above mailing list discussion, it seems the value of 4 + * was appropriate for other Unix systems with HZ=100, and that + * SHIFT_PLL should be decreased as HZ increases. However, Linux's + * clock steering implementation is HZ independent. + * + * Through experimentation, a SHIFT_PLL value of 2 was found to allow + * for fast convergence (very similar to the NTPv3 code used prior to + * v2.6.19), with good clock stability. + * + * + * SHIFT_FLL is used as a dampening factor to define how much we + * adjust the frequency correction for a given offset in FLL mode. + * In David Mills' nanokenrel reference implmentation SHIFT_PLL is 2. + * + * MAXTC establishes the maximum time constant of the PLL. */ -#define SHIFT_PLL 4 /* PLL frequency factor (shift) */ +#define SHIFT_PLL 2 /* PLL frequency factor (shift) */ #define SHIFT_FLL 2 /* FLL frequency factor (shift) */ #define MAXTC 10 /* maximum time constant (shift) */ @@ -192,10 +212,10 @@ struct timex { #define SHIFT_USEC 16 /* frequency offset scale (shift) */ #define PPM_SCALE ((s64)NSEC_PER_USEC << (NTP_SCALE_SHIFT - SHIFT_USEC)) #define PPM_SCALE_INV_SHIFT 19 -#define PPM_SCALE_INV ((1ll << (PPM_SCALE_INV_SHIFT + NTP_SCALE_SHIFT)) / \ +#define PPM_SCALE_INV ((1LL << (PPM_SCALE_INV_SHIFT + NTP_SCALE_SHIFT)) / \ PPM_SCALE + 1) -#define MAXPHASE 500000000l /* max phase error (ns) */ +#define MAXPHASE 500000000L /* max phase error (ns) */ #define MAXFREQ 500000 /* max frequency error (ns/s) */ #define MAXFREQ_SCALED ((s64)MAXFREQ << NTP_SCALE_SHIFT) #define MINSEC 256 /* min interval between updates (s) */ -- cgit v1.1 From e13cf6e04ebc231653e03ebde4799dc55bf62849 Mon Sep 17 00:00:00 2001 From: john stultz Date: Mon, 11 May 2009 18:13:13 -0700 Subject: ntp: fix comment typos Bernhard Schiffner noticed I had a few comment typos in this patch, (note: to save embarrassment, when making typos, avoid copying and pasting them) so this patch corrects them. [ Impact: cleanup ] Reported-by: Bernhard Schiffner Signed-off-by: John Stultz Cc: riel@redhat.com Cc: akpm@linux-foundation.org LKML-Reference: <1242090794.7214.131.camel@localhost.localdomain> Signed-off-by: Ingo Molnar --- include/linux/timex.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/timex.h b/include/linux/timex.h index 0daf961..9910e3b 100644 --- a/include/linux/timex.h +++ b/include/linux/timex.h @@ -179,7 +179,7 @@ struct timex { * NTP convergence time. A higher value makes it stiffer, increasing * convergence time, but making the clock more stable. * - * In David Mills' nanokenrel reference implmentation SHIFT_PLL is 4. + * In David Mills' nanokernel reference implementation SHIFT_PLL is 4. * However this seems to increase convergence time much too long. * * https://lists.ntp.org/pipermail/hackers/2008-January/003487.html @@ -196,7 +196,7 @@ struct timex { * * SHIFT_FLL is used as a dampening factor to define how much we * adjust the frequency correction for a given offset in FLL mode. - * In David Mills' nanokenrel reference implmentation SHIFT_PLL is 2. + * In David Mills' nanokernel reference implementation SHIFT_FLL is 2. * * MAXTC establishes the maximum time constant of the PLL. */ -- cgit v1.1